Hi,
Perhaps I have found a method to unlock the LS990.
I dont know, if this works with us carriers.
I have tried it with a non US carrier and it works for me.
Needed:
Root
Root Explorer
Shortcut Master
1. Replace the two files in /carriers/apps with the two files below with Root Explorer
2. Reboot your phone
3. Open Shortcut master and select search
4. Search for apn adn select com.andoird.settings.ApnSettings and then click Launch
5. Select on the Top Right new apn
6. Fill this form out with the apn from your provider (If you don't know the apn look it up in google)
Done
Now everything should work
Still to do:
Disable the Hand free activation from sprint - I have not found the right app now
In the GSM mode my phone shows only GSM in the status bar and not G E H or H+ - Does someone know how to change this?
Automatic selection of the apn, this can perhaps be done with the file /etc/apns-conf.xml
I hopeed I could help some people, if the unlock was succesfull please give me a feedback
This is at your own risk.
Please do it only, if you know what you do!
Tried and it works. Indeed shows gsm to be as well but works.
garynsa said:
Tried and it works. Indeed shows gsm to be as well but works.
Click to expand...
Click to collapse
Do we have to change the permission of those files. I am unable to get gsm signal after replacing the files. Shows a small x on top of the network bar, also the APN is not sticking.
Assamat said:
Hi,
Perhaps I have found a method to unlock the LS990.
I dont know, if this works with us carriers.
I have tried it with a non US carrier and it works for me.
Needed:
Root
Root Explorer
Shortcut Master
1. Replace the two files in /carriers/apps with the two files below with Root Explorer
2. Reboot your phone
3. Open Shortcut master and select search
4. Search for apn adn select com.andoird.settings.ApnSettings and then click Launch
5. Select on the Top Right new apn
6. Fill this form out with the apn from your provider (If you don't know the apn look it up in google)
Done
Now everything should work
Still to do:
Disable the Hand free activation from sprint - I have not found the right app now
In the GSM mode my phone shows only GSM in the status bar and not G E H or H+ - Does someone know how to change this?
Automatic selection of the apn, this can perhaps be done with the file /etc/apns-conf.xml
I hopeed I could help some people, if the unlock was succesfull please give me a feedback
This is at your own risk.
Please do it only, if you know what you do!
Click to expand...
Click to collapse
You are best!!! Thx man.:good:
AlanVenu said:
Do we have to change the permission of those files. I am unable to get gsm signal after replacing the files. Shows a small x on top of the network bar, also the APN is not sticking.
Click to expand...
Click to collapse
No i didnt need to change permission. Try changing network type to gsm. Yes APN doesnt show up but i think it stays as my data started to work
not working hardreset com.phone android Stoped FC.......
Well it didn't work for me eaither
Sent from my HTC6525LVW using XDA Free mobile app
I tried follow the guide and recieved a repeat error said phone app failed. But I got the sim out and reboot, the error disappeared.
Strange its not working for so many of you. It worked perfectly for me and I am still using it
usa
garynsa said:
Strange its not working for so many of you. It worked perfectly for me and I am still using it
Click to expand...
Click to collapse
On USA carrier?
No I am using it international
I could it only try on iternational carriers.
Perhaps everybody can write if the phone was used with sprint before and if it was activated.
My phone was not activated and I didn't use it with sprint.
I have done a factory reset before, so that everything was clear.
This is great man!!!
My phone was not activated and im now using it with a Mexican carrier (telcel) with no problems
So how many till now has been able to unlock this? Is it on a particular firmware only? Just wanting to be sure in case I buy this. Oh And is it permanent?
garynsa said:
Strange its not working for so many of you. It worked perfectly for me and I am still using it
Click to expand...
Click to collapse
I located in China. I try the sims from CMCC/CU which is the two GSM carrier here and receive the same error.
I covered the two files and set the right permission same as original files, 640 and 600. I don't know what happened. I will take another LS990 to try again.
Sent from my HTC6525LVW using XDA Free mobile app
Did anyone try the method that works on G2?
varunrs said:
Did anyone try the method that works on G2?
Click to expand...
Click to collapse
I did try to copy the g2 files but couldn't get the SIM to detect. Once I overwrote with these files I got it working
lostvangel said:
I located in China. I try the sims from CMCC/CU which is the two GSM carrier here and receive the same error.
I covered the two files and set the right permission same as original files, 640 and 600. I don't know what happened. I will take another LS990 to try again.
Sent from my HTC6525LVW using XDA Free mobile app
Click to expand...
Click to collapse
perhaps you can post a screenshot with the error?
I have found the app to disable the Hand Free activation:
I have uninstalled LGSetupWizard with Titanum Backup and it was gone.
Someone said change SPR to OPEN setup SIM and APN then change OPEN to spr reboot recovery wipe cache and this will make good for Domestic APN..I will try later on today and report back
12manytimes said:
Someone said change SPR to OPEN setup SIM and APN then change OPEN to spr reboot recovery wipe cache and this will make good for Domestic APN..I will try later on today and report back
Click to expand...
Click to collapse
Editing the Build prop will give you a bootloops. Also we don't have a recovery yet.
Related
I'm following the guide http://forum.xda-developers.com/showthread.php?t=1575749 for flashing the evo 3d to page plus from sprint. currently i have the phone rooted with s-off running meanrom. under the instructions it says you need to enter the MSID on the phone and if you don't have it to call your service provider. I called page plus and they say that they can't give me a MSID without the phone being activated on their service. I'm not sure what to do next. Do I give them the new ESN and have the change the service and then will they be able to give me the MSID or is there another method to do this?
Thanks for any help.
Edit: i'm currently on page plus with a old lg 9100 and the phone i'm trying to flash is a sprint phone that has never been activated.
second question: the apn backup and restore app says that APNS cannot be restored or deleted on this device because android 4.0+ does not allow 3rd party apps to write apn settings. what should I do to get this to work. i have the phone rooted with s-off currently running meanrom. should i put a different rom on there?
snow145532 said:
I'm following the guide http://forum.xda-developers.com/showthread.php?t=1575749 for flashing the evo 3d to page plus from sprint. currently i have the phone rooted with s-off running meanrom. under the instructions it says you need to enter the MSID on the phone and if you don't have it to call your service provider. I called page plus and they say that they can't give me a MSID without the phone being activated on their service. I'm not sure what to do next. Do I give them the new ESN and have the change the service and then will they be able to give me the MSID or is there another method to do this?
Thanks for any help.
Edit: i'm currently on page plus with a old lg 9100 and the phone i'm trying to flash is a sprint phone that has never been activated.
second question: the apn backup and restore app says that APNS cannot be restored or deleted on this device because android 4.0+ does not allow 3rd party apps to write apn settings. what should I do to get this to work. i have the phone rooted with s-off currently running meanrom. should i put a different rom on there?
Have you flashed the page plus prl yet? If so you need to call them and give them your esn number. I believe the msid is for if you want to port your number over first before you call page plus. If you followed the guide to a T up until the apn part. Even though apps won't allow you to write to the apn, its ok because all your gonna do is delete and restore. Put your phone in airplane plane mode. Delete your current apn, click restore apn chose the page plus one. Disable airplane mode and reboot. I hope this helps you.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Jsparta26 said:
Have you flashed the page plus prl yet? If so you need to call them and give them your esn number. I believe the msid is for if you want to port your number over first before you call page plus. If you followed the guide to a T up until the apn part. Even though apps won't allow you to write to the apn, its ok because all your gonna do is delete and restore. Put your phone in airplane plane mode. Delete your current apn, click restore apn chose the page plus one. Disable airplane mode and reboot. I hope this helps you.
Click to expand...
Click to collapse
thanks, for the input. i'm going to try this a little later today.
so just an update for anyone who might stumble onto this thread. I figured out the steps: (Thanks Jsparta26)
After I flashed the prl, I called page plus and they activated the ESN. The MSID was the same as my phone number. Phone still didn't work, so i reflashed the PRL and then the phone was working. I didn't need to delete the APN, it was just working after. Now phone works for calls and 1x data. no MMS yet, got to figure that one out.
thanks for the help.
Your mms is also included in the apn file. Try the delete and restore method to see if works for you
Jsparta26 said:
Your mms is also included in the apn file. Try the delete and restore method to see if works for you
Click to expand...
Click to collapse
I'm getting the message: Unfortunately APSs cannot be restored or deleted on this device because Android 4.0+ does not allow 3rd party apps to Write APN settings.
The Options in the Program are: Backup APNs, Restore APNs, Delete Backup Files, Delete APNs, and Donate.
Not sure what to do from here.
Ignore the part of backup, delete and restore. I was able to do this with an aosp rom and should work with a sense rom. You just cannot write to the apn file. Make a backup of your original apn, delete the current one, then restore using the page plus apn file and reboot. It should work. If not then manually copy it the apn file with a file explorer into your sdcard and take the page plus file and paste in the original location of the file and reboot. Let me know if that works.COLOR="Silver"]
---------- Post added at 09:39 AM ---------- Previous post was at 09:33 AM ----------
[/COLOR]Which app are you using? Well if it don't work then I have another solution. Do you happen to know the settings of page plus's apn settings? Also do you know your msl code? If so, then open up your dialer and type ##3282# and punch in your msl code under edit. Once your through click on advanced and scroll down to the bottom of the screen and click on mmsc settings. If you know the settings you can manually input the settings in their correct spots. Once you do that hit commint changes or modifications at the top of the screen and hit reboot
Jsparta26 said:
Ignore the part of backup, delete and restore. I was able to do this with an aosp rom and should work with a sense rom. You just cannot write to the apn file. Make a backup of your original apn, delete the current one, then restore using the page plus apn file and reboot. It should work. Let me know if that works for you.
Click to expand...
Click to collapse
I think I figured it out. In the settings for the program there is an option for "ignore ICS". i selected that and was able to delete and restore. looks like mms is now working, but it still shows 1x data.
snow145532 said:
I think I figured it out. In the settings for the program there is an option for "ignore ICS". i selected that and was able to delete and restore. looks like mms is now working, but it still shows 1x data.
Click to expand...
Click to collapse
Speedtest.net
DL: 118kbps, UL: 26kbps, Ping: 810ms
yeah, 1x not so good.
Well I am glad that you got mms working. Not sure about the 1x signal, it could be a cell tower issue, not enough cell towers or that page plus's network is low priority. Have you flashed the latest page plus prl?
Jsparta26 said:
Well I am glad that you got mms working. Not sure about the 1x signal, it could be a cell tower issue, not enough cell towers or that page plus's network is low priority. Have you flashed the latest page plus prl?
Click to expand...
Click to collapse
plenty of cell towers here, so that shouldn't be a problem. i'll try and flash the other prls and see what i get (right now i'm running the one from the main thread included in the rar). in the main thread i think there were problems with people not getting 3g. if i can't solve it with the prls, i'll have to comb through that thread for a solution.
Thanks for your help.
Jordan
No problem. Just keep this in mind. Check to see if your radios are up to date on page plus's firmware. People used to have that problem when they went flash happy with the vm ruu ics leak back in may and messed up their phones with the dreaded 1x signal. Just something to think about. Good luck.
purchased MDK S4 without activated sim card in phone from radio shack, rooted, placed SIM card in phone and activated automatically. rooted with tool succesfuly with root checker... flashed with Bonestock1.3 twice ... re-flashed modem, stock kernal, tried multiple messaging apps ...everything else on phone works perfectly, i can receive texts, but it will NOT send texts. says failed to send. my SD card is formatted Fat32? does it need ex Fat if MDK?. could clerk at radio shack not activated SIM card properly ... phone not activated properly when card inserted into rooted phone?.. searched forums already. please help. thnx
1heathen said:
purchased MDK S4 without activated sim card in phone from radio shack, rooted, placed SIM card in phone and activated automatically. rooted with tool succesfuly with root checker... flashed with Bonestock1.3 twice ... re-flashed modem, stock kernal, tried multiple messaging apps ...everything else on phone works perfectly, i can receive texts, but it will NOT send texts. says failed to send. my SD card is formatted Fat32? does it need ex Fat if MDK?. could clerk at radio shack not activated SIM card properly ... phone not activated properly when card inserted into rooted phone?.. searched forums already. please help. thnx
Click to expand...
Click to collapse
Have you checked to make sure everything is kosher in settings>>more>>APN and mobile networks? Make sure you have it on LTE/CDMA and the APN settings are correct,,,,reboot into recovery wipe cache/dalvik afterwards fix permissions and reboot
JamesPumaEnjoi said:
Have you checked to make sure everything is kosher in settings>>more>>APN and mobile networks? Make sure you have it on LTE/CDMA and the APN settings are correct,,,,reboot into recovery wipe cache/dalvik afterwards fix permissions and reboot
Click to expand...
Click to collapse
hello, i checked settings and it was on Global, so i changed it to LTE/CDMA, also APN - LTE - Verizon internet VZWINTERNET (with a green dot) .. rebooted cleared both caches, fix permission, etc...when u say "fix permissions", is that in ROM Manager or in CWMR recovery? i did it in RM ... i did that 3 times and each time i was able to send one text, then it fails after that ...im headed there but still not fixed ..any other suggestions? thnx
1heathen said:
hello, i checked settings and it was on Global, so i changed it to LTE/CDMA, also APN - LTE - Verizon internet VZWINTERNET (with a green dot) .. rebooted cleared both caches, fix permission, etc...when u say "fix permissions", is that in ROM Manager or in CWMR recovery? i did it in RM ... i did that 3 times and each time i was able to send one text, then it fails after that ...im headed there but still not fixed ..any other suggestions? thnx
Click to expand...
Click to collapse
I would call Verizon tech support and have them send a signal to your phone/sim card to make sure its sending and receiving properly
JamesPumaEnjoi said:
I would call Verizon tech support and have them send a signal to your phone/sim card to make sure its sending and receiving properly
Click to expand...
Click to collapse
problem solved!!: i called verizon support. level 2 tech support reset messaging plan because somehow between new and old phone send message had been checked on ... reboot phone and works ...thnx
1heathen said:
problem solved!!: i called verizon support. level 2 tech support reset messaging plan because somehow between new and old phone send message had been checked on ... reboot phone and works ...thnx
Click to expand...
Click to collapse
You're very welcome man glad I could be of some help enjoy your phone....hit that thanks button
Hello guys everyone were worried about the data issue in cm11 so here I am with the fix for that
Please not I am not at all responsible for any damage to device Please be careful
Bug:
No data connection even after installing the fix
It works for some people that too only 3G
Fix: First install the data fix if you haven't Installed
Open dialer and type *#*#4636#*#*
Open the phone information
And In network mode change it to GSM only if you are in 2G network and when you want to use 3G set it to WCDMA only
And voila data will be working fine
TIP: when you want to use 3g in sim1 and it is using 2g then change the sim slot and in second sim slot you will get forced 3g(only 3g works) and when switching back to stock you will always find the option to set the preferred type . so you can enjoy data both on CM11 and stock without and issues
Hit thanks if you like my work
Thank you
Prashanth Meesara: said:
Hello guys everyone were worried about the data issue in cm11 so here I am with the fix for that
Please not I am not at all responsible for any damage to device Please be careful
Bug:
No data connection even after installing the fix
It works for some people that too only 3G
Fix: First install the data fix if you haven't Installed
Open dialer and type *#*#4636#*#*
Open the phone information
And In network mode change it to GSM only if you are in 2G network and when you want to use 3G set it to WCDMA only
And voila data will be working fine
Hit thanks if you like my work
Thank you
Click to expand...
Click to collapse
is it for guys it already working data connection?
coz it doesn't work for me
@SidDev said:
is it for guys it already working data connection?
coz it doesn't work for me
Click to expand...
Click to collapse
Just install the data fix if you haven't Installed and just follow its working and will work
Sent from my Moto E using XDA Free mobile app
Prashanth Meesara: said:
Just install the data fix if you haven't Installed and just follow its working and will work
Sent from my Moto E using XDA Free mobile app
Click to expand...
Click to collapse
OK I will try and let you know thanks
Sim 2
Data works only in sim 1, while opting for data in sim 2 the error shown is 'error in subscription...' Any fix for that ? Indian variant.
shubham-moto_e said:
Data works only in sim 1, while opting for data in sim 2 the error shown is 'error in subscription...' Any fix for that ? Indian variant.
Click to expand...
Click to collapse
Do one thing remove SIM 1 and dial the code set it as GSM only and then insert back sim1 and check it should be working. Since it won't support both 3g (which is set by default)
Sent from my Moto E using XDA Free mobile app
condor data fix
Where can I find the data fix?
tia
Prashanth Meesara: said:
Just install the data fix if you haven't Installed and just follow its working and will work
Sent from my Moto E using XDA Free mobile app
Click to expand...
Click to collapse
Hi, so before I go out and purchase a new SIM I was hoping someone could help me. Originally I was trying to alter the MMS port set in my APN because MMS was failing over wifi due to running Adblock. In doing so I somehow managed to erase my Internet APN. I believe it was just set to vzwinternet.
So on my lg g3 I unfortunately have no way to add an APN, it works fine for wifi and calls still but I have no cellular internet at the moment. The only option when going to APN settings is Reset to Defaults, which does nothing as it just shows "No APNs". The mobile networks option is actually greyed out under Settings->Wireless & Networks->More... but I'm able to get to APN Settings still by using an app.
Possible solutions I've thought of, does anyone knows if these are possible?
A) Is there any way to edit my build.prop to allow me to add an APN such as "ril.sales_code=LOL & ro.csc.sales_code=LOL" (I've tried this it doesn't work).
B) Is it possible to re-add it by replacing apns-conf.xml in /system/etc/ ? If that is possible could someone post theirs so I can replace it?
C) Are there any root apps to allow me to add an APN? (from my research there aren't any since android 4.0)
Or am I just going to have to go out and get a new SIM? I've already master reset hoping it was software related and that hasn't helped.
EDIT: Nevermind guys fixed it by doing a reflash back to factory with lg flashtool. Nothing to see here *whistles*
Hi Jab
I met the same issue.
Could you please tell me how to reflash back to factory?
Thank you
You need to root it, and use shortcut master to open APN setting, same case with my US Cellular G3
otonieru said:
You need to root it, and use shortcut master to open APN setting, same case with my US Cellular G3
Click to expand...
Click to collapse
Thanks
Must be UICC Unlocked
Before Starting Make Sure You Have A Copy Of Your Internet Settings. (Everything in APN Settings)
Go to the Data Menu by entering ##DATA#
Select the APN Settings & Select Edit (Enter MSL)
Tap Each APN Separately (Select Edit & Enter MSL) & DELETE APNs (By Selecting The 3 Dots To The Right)
**You won't be able to delete ota apn but that's fine.
**Now you should have no internet!!!
Go To Regular Settings Then Select (More, Mobile Networks, Access Point Names) & Add APN Manually. **Adding "default,mms,supl,dun" under APN TYPE
**Put in all the correct settings the first time before saving APN. YOU WON'T BE ABLE TO GO BACK & EDIT APN AFTER IT'S SAVE. (The only way to correct the APN once saving it is to start at step one. Yes starting all over.)
Once You Put The Correct APN Settings In & Save It, LTE or DATA Should Show Up.
TRY TETHERING!!! OH IT WORKS.....?
Hit the thanks button if I help and consider donating :good:
Could you do a step by step screenshot because i do have my msl to my device and this isnt really working
DominicGresham said:
Could you do a step by step screenshot because i do have my msl to my device and this isnt really working
Click to expand...
Click to collapse
Ok no problem it'll be posted in the morning....
DominicGresham said:
Could you do a step by step screenshot because i do have my msl to my device and this isnt really working
Click to expand...
Click to collapse
Which carrier are you with?
DominicGresham said:
Could you do a step by step screenshot because i do have my msl to my device and this isnt really working
Click to expand...
Click to collapse
This link is a guide that I worked through with another guy on XDA.
https://forum.xda-developers.com/sprint-g6/help/activated-sprint-ls993-mind-testing-t3598048
I am with sprint
wtharden said:
Which carrier are you with?
Click to expand...
Click to collapse
---------- Post added at 09:08 PM ---------- Previous post was at 09:04 PM ----------
I can delete every apn with my msl code what software version is this :/
wtharden said:
Before Starting Make Sure You Have A Copy Of Your Internet Settings. (Everything in APN Settings)
Go to the Data Menu by entering ##DATA#
Select the APN Settings & Select Edit (Enter MSL)
Tap Each APN Separately (Select Edit & Enter MSL) & DELETE APNs (By Selecting The 3 Dots To The Right)
**You won't be able to delete ota apn but that's fine.
**Now you should have no internet!!!
Go To Regular Settings Then Select (More, Mobile Networks, Access Point Names) & Add APN Manually. **Adding "default,mms,supl,dun" under APN TYPE
**Put in all the correct settings the first time before saving APN. YOU WON'T BE ABLE TO GO BACK & EDIT APN AFTER IT'S SAVE. (The only way to correct the APN once saving it is to start at step one. Yes starting all over.)
Once You Put The Correct APN Settings In & Save It, LTE or DATA Should Show Up.
TRY TETHERING!!! OH IT WORKS.....?
Hit the thanks button if I help and consider donating :good:
Click to expand...
Click to collapse
DominicGresham said:
I am with sprint
---------- Post added at 09:08 PM ---------- Previous post was at 09:04 PM ----------
I can delete every apn with my msl code what software version is this :/
Click to expand...
Click to collapse
Same version as yours because there's no updates yet. If you're in good standing, call thrm and get the phone internationally unlocked. Tell them that you're going on a trip or something to another country and you would like to get the phone internationally unlocked. You must be in good atanding with Sprint to do so. Read the whole post I linked.
I called up one of my buddys that works at sprint got it UICC unlocked within 30 minutes now i have the apn settings that allow me to finally add things awesome!
wtharden said:
Same version as yours because there's no updates yet. If you're in good standing, call thrm and get the phone internationally unlocked. Tell them that you're going on a trip or something to another country and you would like to get the phone internationally unlocked. You must be in good atanding with Sprint to do so. Read the whole post I linked.
Click to expand...
Click to collapse
DominicGresham said:
I called up one of my buddys that works at sprint got it UICC unlocked within 30 minutes now i have the apn settings that allow me to finally add things awesome!
Click to expand...
Click to collapse
Cool, remember to hit the thanks button.
Does this work on Verizon model?
Spider210 said:
Does this work on Verizon model?
Click to expand...
Click to collapse
I'm not sure.... If you have access to the hidden data menu, give it a try....
wtharden said:
Before Starting Make Sure You Have A Copy Of Your Internet Settings. (Everything in APN Settings)
Go to the Data Menu by entering ##DATA#
Select the APN Settings & Select Edit (Enter MSL)
Tap Each APN Separately (Select Edit & Enter MSL) & DELETE APNs (By Selecting The 3 Dots To The Right)
**You won't be able to delete ota apn but that's fine.
**Now you should have no internet!!!
Go To Regular Settings Then Select (More, Mobile Networks, Access Point Names) & Add APN Manually. **Adding "default,mms,supl,dun" under APN TYPE
**Put in all the correct settings the first time before saving APN. YOU WON'T BE ABLE TO GO BACK & EDIT APN AFTER IT'S SAVE. (The only way to correct the APN once saving it is to start at step one. Yes starting all over.)
Once You Put The Correct APN Settings In & Save It, LTE or DATA Should Show Up.
TRY TETHERING!!! OH IT WORKS.....?
Hit the thanks button if I help and consider donating :good:
Click to expand...
Click to collapse
now do u guys got a method of getting msl without sprint we just found a way on g5 to get msl no root and without sprint
plus hiddenCallMenu works on g4 and g5 and we can gsm unlock the sprint varient with it
plus edit a load of msl required settings without msl
TheMadScientist420 said:
now do u guys got a method of getting msl without sprint we just found a way on g5 to get msl no root and without sprint
plus hiddenCallMenu works on g4 and g5 and we can gsm unlock the sprint varient with it
plus edit a load of msl required settings without msl
Click to expand...
Click to collapse
No way that I know of of getting the MSL without Sprint. I came from the G5 so of course I triend the HiddenMenu app from the G5 but it didn't work on the G6. It's a new hidden menu app..... Hidden Menu 7.0
wtharden said:
No way that I know of of getting the MSL without Sprint. I came from the G5 so of course I triend the HiddenMenu app from the G5 but it didn't work on the G6. It's a new hidden menu app..... Hidden Menu 7.0
Click to expand...
Click to collapse
g5s on nougat
we use a logcat that does remote adb no root it took me 2 hours of log reading to find mine
https://forum.xda-developers.com/sprint-lg-g5/help/to-msl-sprint-root-t3629845
this is worth a shot
TheMadScientist420 said:
g5s on nougat
we use a logcat that does remote adb no root it took me 2 hours of log reading to find mine
https://forum.xda-developers.com/sprint-lg-g5/help/to-msl-sprint-root-t3629845
this is worth a shot
Click to expand...
Click to collapse
I have my MSL already but I'll still try it out for other G6 users who want their MSL
wtharden said:
I have my MSL already but I'll still try it out for other G6 users who want their MSL
Click to expand...
Click to collapse
I took like 5 min worth of logs and got a lot. Advice is be quik once logs enabled. Setup wasnt to bad either. Follow the apps directions on goog play. Lol if i can do it just about anyone should be able to.
How were you able to get the MSL from logcat? I'm on sprint, entering ##DIAG# doesn't prompt me for my MSL or service code.
TheMadScientist420 said:
I took like 5 min worth of logs and got a lot. Advice is be quik once logs enabled. Setup wasnt to bad either. Follow the apps directions on goog play. Lol if i can do it just about anyone should be able to.
Click to expand...
Click to collapse
How did you get msl from logcat..it does not ask me msl when doijg ##diag#'...
Also Can you paste line where you found msl in logs
desmataks said:
How did you get msl from logcat..it does not ask me msl when doijg ##diag#'...
Also Can you paste line where you found msl in logs
Click to expand...
Click to collapse
no i cant i lost that log the day i did it, my g5 is hardbricked rite now. or i would help you out.
u can try a diffrent code dont have to be ##diag any that asks for msl
TheMadScientist420 said:
no i cant i lost that log the day i did it, my g5 is hardbricked rite now. or i would help you out.
u can try a diffrent code dont have to be ##diag any that asks for msl
Click to expand...
Click to collapse
thanks.... i tried it with ##DATA# but i could not find the MSL code or hex code to extract MSL even searched log for 1 hour with "OEM_HOOK_RAW" text.. anyways I got MSL just now from sprint by activating it temporarily on a sprint account.
Anyways The issue now is I am not able to delete APNs as no option comes to delete in APN settings by ##DATA# for all APNs but ota.. option to delete comes for ota and i enter MSL but nothing happens...
Do I need to put sprint sim and let it register to network and then do PRL update and profile update?
I am afraid to do it as it will install sprint logo and sprint apps if i do it.. i think i can remove some using ##BRAND# but doing that will it effect my unlock?
Please suggest.
Thanks in advance..