Related
Hello all,
I have an issue with my Samsung Galaxy Ace GT-5830i that is stuck in Android system recovery (3e) mode, and it seems there is no way to get it out of there.
- upon selecting wipe data/factory reset the device is stuck with one message "multicsc: src /system/csc/MTL/system/ ." and "Formatting /data..." bellow
- upon selecting apply zip from the SD card the installation always fails with various error messages (I tried to install cyanogen mod rom in an attempt to recover, but failed as well)
- upon selecting reboot now the whole screen disappears with only the "multicsc: src /system/csc/MTL/system/ ." message at the bottom of the screen and I need to remove the battery.
I will greatly appreciate if anyone on this forum could help with the issue, as I have search for possible solutions without any luck so far, and my phone appears to be bricked.
Thank you,
John
My guess is u still on stock recovery. Flashing cm rom or any other custom rom needs clockworkmod recovery, moroever theres no cm rom for s5830i yet.
For now u could try to reflash stock rom with odin. Theres a thread somewhere guiding howto do so for s5830i. Also do note that anything for original s5830 wont work on your s5830i.
Last but not least, do read more and understand what you're trying to do before u really hardbricked the poor thing.
Thanks for the pointers, I really appreciate it and everything works fine now.
It was actually my nephew's phone, so I have no idea how he managed to brick it like that.
Samsung Ace s5830i Stuck on recovery
Hi
Can you please tell me how you have solve ur problem of s5830i recovery mode
Cause am Facing this problem
I have searched many forums but no success yet
anybody please help me..........
john.smith1972 said:
Thanks for the pointers, I really appreciate it and everything works fine now.
It was actually my nephew's phone, so I have no idea how he managed to brick it like that.
Click to expand...
Click to collapse
DevDeep700 said:
Hi
Can you please tell me how you have solve ur problem of s5830i recovery mode
Cause am Facing this problem
I have searched many forums but no success yet
anybody please help me..........
Click to expand...
Click to collapse
Don't use nothing from GT-S5830 model your model is GT-S5830i
What's exactly your problem?
hold vol + and - and plug in usb cable to get into donwload mode. flash the s5830i stock rom.
evilpiggy6172 said:
hold vol + and - and plug in usb cable to get into donwload mode. flash the s5830i stock rom.
Click to expand...
Click to collapse
I have the exact same problem. Except I can't even enter into download mode. Phone boots into recovery mode regardless of what buttons I press, get stuck at "formatting /data", and I can't flash anything. All the buttons seem to function as intended in the recovery menu, so it's not a hardware failure. Any ideas?
Centrumgsm said:
I have the exact same problem. Except I can't even enter into download mode. Phone boots into recovery mode regardless of what buttons I press, get stuck at "formatting /data", and I can't flash anything. All the buttons seem to function as intended in the recovery menu, so it's not a hardware failure. Any ideas?
Click to expand...
Click to collapse
The Download Mode key combination is Vol Up+ Vol Down+ Power button. Did you install anything that was not meant for device? Do post the result. Hope I Helped
mahithm said:
The Download Mode key combination is Vol Up+ Vol Down+ Power button. Did you install anything that was not meant for device? Do post the result. Hope I Helped
Click to expand...
Click to collapse
Oh right, sorry. Forgot about the download mode combination. Why they found it necessary to change it for this one model, I'll never understand. Flashed it back to life, thanks
Hey there . I have made the same thing with my s5830i i have flashed with odin but still the same problem stuck on --appling--multi--csc -- can any one help me?
Falco ALB said:
Hey there . I have made the same thing with my s5830i i have flashed with odin but still the same problem stuck on --appling--multi--csc -- can any one help me?
Click to expand...
Click to collapse
Have you flashed a fresh rom?
PS: It's a WRONG SECTION
Falco ALB said:
Hey there . I have made the same thing with my s5830i i have flashed with odin but still the same problem stuck on --appling--multi--csc -- can any one help me?
Click to expand...
Click to collapse
Flash stock rom thru odin then from recovery mod Clear data and cache then reboot. [emoji4]
I know this is kind of old but I have same problem, i got this phone from cousin and it wasnt booting , it was going straight into recovery, since my mother has same phone and i used odin before to save her, i am familiar with odin so, I tried new firmware flash with odin , it passed on odin but again doesn't want to finish install on the phone, it says
installing update...
--appling muti-csc --
Fromatting /cache...
-- Appling Muti-CSC __
and it wont go anywhere from there , and if I reboot it goes back in recovery again and it wont format data again, formatting cache works. I also tried to flash cm7, rooted it, installed cwm but when i do reboot it is not in cwm but in regular recovery, so after that I installed cwm again and without reboot installed cm7 kernel wich succeded , after that installing the cm7 itself stuck on "installing update" , could this be hardware issue, it always seem to be stuck when its doing something with "data". I tried couple odin flashes multi package and single package, i was carefull to chose correct firmware, only thing i could make mistake is maybe with pit and re-partition. Anyone help i would appriciate it much since i have no other phone than this.
Ghost1105 said:
I know this is kind of old but I have same problem, i got this phone from cousin and it wasnt booting , it was going straight into recovery, since my mother has same phone and i used odin before to save her, i am familiar with odin so, I tried new firmware flash with odin , it passed on odin but again doesn't want to finish install on the phone, it says
installing update...
--appling muti-csc --
Fromatting /cache...
-- Appling Muti-CSC __
and it wont go anywhere from there , and if I reboot it goes back in recovery again and it wont format data again, formatting cache works. I also tried to flash cm7, rooted it, installed cwm but when i do reboot it is not in cwm but in regular recovery, so after that I installed cwm again and without reboot installed cm7 kernel wich succeded , after that installing the cm7 itself stuck on "installing update" , could this be hardware issue, it always seem to be stuck when its doing something with "data". I tried couple odin flashes multi package and single package, i was carefull to chose correct firmware, only thing i could make mistake is maybe with pit and re-partition. Anyone help i would appriciate it much since i have no other phone than this.
Click to expand...
Click to collapse
Use odin 1.85 and flash splitted firmware from odin..
http://forum.xda-developers.com/showthread.php?t=2199503
Sent from my YU5510 using Tapatalk
amolgosavi said:
Use odin 1.85 and flash splitted firmware from odin..
http://forum.xda-developers.com/showthread.php?t=2199503
Sent from my YU5510 using Tapatalk
Click to expand...
Click to collapse
I already tried that, still same
I have a couple more questions.
1.) I have the brick bug, right?
2.) Flashing a safe kernel and then restoring the backup won't help either I presume?
3.) Would flashing the PIT file from this thread http://forum.xda-developers.com/showpost.php?p=26428986&postcount=1 solve my problem?
thx in advance
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hi everyone
first of all, this is my first post so if i posted in the wrong section i am sorry
now here's my problem:
i have a Galaxy S2 (GT-I9100) with rooted stock ICS 4.0.4. I wanted to restore a backup which I created using the Nandroid Backup app on the same day. So i went into recovery mode, flashed a temporary CWM (from this thread http://http://forum.xda-developers.com/showthread.php?t=2327472) then restored the backup from my SD card. if i remember correctly, if the restoration of the backup was succesful the phone should stay in CWM. In my case the screen went black for a few seconds then it looked like it would boot. However it just got stuck showing the Samsung logo with model number, so Samsung Galaxy S II GT-I9100.
I can still enter recovery and download mode. I did a factory reset, wiped cache partition and even re-flashed the stock ROM using odin but to no avail. After flashing the ROM, it didn't work so i did a factory reset again. It still got stuck on the logo so i went into recovery again. In recovery mode it says "E: failed to mount /sytsem (invalid arguement)". i could solve that problem by reflashing the ROM though.
does anybody know what caused this and even more imortantly, how to solve my issue?
On a side note, could be relevant, my phone just froze all of a sudden some times in the past months. i had to reboot my phone everytime it froze
Thx in advance
EDIT: ok, i've re-flashed the ROM again with odin. at first there is the green droid and the blue loading bar right below, but after a few seconds the screen goes black again and it tries to boot and gets stuck. I pulled battery, reinserted it and went into recovery, wiped cache. when i select "reboot" from the menu it says "E: failed to mount /sytsem (invalid arguement)"
Edit2: after flashing the ROM i get this "E: failed to mount /data (invalid arguement)" when rebooting over recovery. I've found a thread where it says i need to flash the dbdata.rfs.tar using odin. i will try that now
Edit3: when i try to flash the file i get a "NAND write start" "fail" error. I've been to a store that will take care of my problem.
bump
-shadow.walker- said:
Hi everyone
first of all, this is my first post so if i posted in the wrong section i am sorry
now here's my problem:
i have a Galaxy S2 (GT-I9100) with rooted stock ICS 4.0.4. I wanted to restore a backup which I created using the Nandroid Backup app on the same day. So i went into recovery mode, flashed a temporary CWM (from this thread http://http://forum.xda-developers.com/showthread.php?t=2327472) then restored the backup from my SD card. if i remember correctly, if the restoration of the backup was succesful the phone should stay in CWM. In my case the screen went black for a few seconds then it looked like it would boot. However it just got stuck showing the Samsung logo with model number, so Samsung Galaxy S II GT-I9100.
I can still enter recovery and download mode. I did a factory reset, wiped cache partition and even re-flashed the stock ROM using odin but to no avail. After flashing the ROM, it didn't work so i did a factory reset again. It still got stuck on the logo so i went into recovery again. In recovery mode it says "E: failed to mount /sytsem (invalid arguement)". i could solve that problem by reflashing the ROM though.
does anybody know what caused this and even more imortantly, how to solve my issue?
On a side note, could be relevant, my phone just froze all of a sudden some times in the past months. i had to reboot my phone everytime it froze
Thx in advance
EDIT: ok, i've re-flashed the ROM again with odin. at first there is the green droid and the blue loading bar right below, but after a few seconds the screen goes black again and it tries to boot and gets stuck. I pulled battery, reinserted it and went into recovery, wiped cache. when i select "reboot" from the menu it says "E: failed to mount /sytsem (invalid arguement)"
Edit2: after flashing the ROM i get this "E: failed to mount /data (invalid arguement)" when rebooting over recovery. I've found a thread where it says i need to flash the dbdata.rfs.tar using odin. i will try that now
Edit3: when i try to flash the file i get a "NAND write start" "fail" error. I've been to a store that will take care of my problem.
Click to expand...
Click to collapse
hey buddy .. just wana know .. all u have done .. I mean to flash CWM ,, backup ,, restore and any stuff ... u performed all of these things using stock kernel .. ???
c0olmad said:
hey buddy .. just wana know .. all u have done .. I mean to flash CWM ,, backup ,, restore and any stuff ... u performed all of these things using stock kernel .. ???
Click to expand...
Click to collapse
yeah, stock ICS kernel and ROM
-shadow.walker- said:
yeah, stock ICS kernel and ROM
Click to expand...
Click to collapse
buddy it is advised to not to perform any thing like .. restore .. flashing etc etc .. as stock kernel is not safe to perform these operations .. whats the progress of ur fone now .. ???
-shadow.walker- said:
yeah, stock ICS kernel and ROM
Click to expand...
Click to collapse
Like c0olmad said, there is a brick bug in ICS. It would be alot better and safer to flash stock jellybean 4.1.2 link below.
http://forum.xda-developers.com/showthread.php?t=1544487
Unsure of why your still on ics but below is a link to get a safe kernal where brick bug has been fixed. Make sure you get the kernal for your build.
http://forum.xda-developers.com/showthread.php?t=1877270
c0olmad said:
buddy it is advised to not to perform any thing like .. restore .. flashing etc etc .. as stock kernel is not safe to perform these operations .. whats the progress of ur fone now .. ???
Click to expand...
Click to collapse
I've been to the store today. He said my case is a bit complicated and he will call me when it' finished.
stonedpsycho said:
Like c0olmad said, there is a brick bug in ICS. It would be alot better and safer to flash stock jellybean 4.1.2 link below.
http://forum.xda-developers.com/showthread.php?t=1544487
Unsure of why your still on ics but below is a link to get a safe kernal where brick bug has been fixed. Make sure you get the kernal for your build.
http://forum.xda-developers.com/showthread.php?t=1877270
Click to expand...
Click to collapse
TBH, I was aware that there was a brick bug but I thought i wouldn't be affected :silly:
And I was happy with ICS so I didn't upgrade. Also there is an app that currently only works on 4.0 or lower, so I didn't bother with upgrading.
the technicians of the store weren't able to repair it. i guess i have the brickbug :crying:
Hey guys, I got a Galaxy Ace from my friend (he got a new phone and this one wasn't working, so he gave it to me), and now I'm trying to fix it. But seems like this little guy will be hard to fix.
You turn it up, the logo screen show up and the boot animation starts. Shortly after, the animation will hang and will start over. I've tried booting it in recovery mode and wiping data/cache, but I get two messages when I reboot:
E:failed to mount /data (Invalid argument)
E:copy_log_files_to_data :: can't mount /dataRebooting
Any idea about how should I try fixing it?
Edit: recorded a small video, so you can have a general idea of it:
https://www.youtube.com/watch?v=hsDRL4QkL9c
fr4n said:
Hey guys, I got a Galaxy Ace from my friend (he got a new phone and this one wasn't working, so he gave it to me), and now I'm trying to fix it. But seems like this little guy will be hard to fix.
You turn it up, the logo screen show up and the boot animation starts. Shortly after, the animation will hang and will start over. I've tried booting it in recovery mode and wiping data/cache, but I get two messages when I reboot:
E:failed to mount /data (Invalid argument)
E:copy_log_files_to_data :: can't mount /dataRebooting
Any idea about how should I try fixing it?
Edit: recorded a small video, so you can have a general idea of it:
https://www.youtube.com/watch?v=hsDRL4QkL9c
Click to expand...
Click to collapse
Flash stock via Odin.
Hitesh2626 said:
Flash stock via Odin.
Click to expand...
Click to collapse
With or without a .pit file?
fr4n said:
With or without a .pit file?
Click to expand...
Click to collapse
Yours choice
Hitesh2626 said:
Yours choice
Click to expand...
Click to collapse
Ah, I hope it helps!
Will try it later!
Sent from my GT-P3110 using XDA Free mobile app
Downloaded the ROM from SamMobile and tried to flash. Odin aborts the installation few seconds after starting :s
Sent from my GT-P3110 using XDA Free mobile app
My sister's phone had the same problem. I had used Odin successfully for my phone before, using this guide. But the same did not work for my sister's phone.
She had never rooted her phone or tweaked it in any way but suddenly one day it started bootlooping. I tried MANY guides, wiped everything, and tried a custom ROM but /data wouldn't mount. Even Odin aborted installation. I left it as a lost cause for 2 months.
Today I completely uninstalled and reinstalled Kies, installed the USB drivers and tried this guide, and used "Open Austrailia". I used Odin with pit. Somehow it worked!
Re-partition was ticked and I used the bootloader as well. Just follow the video, even if it's not your country's firmware.
1rdc said:
My sister's phone had the same problem. I had used Odin successfully for my phone before, using this guide. But the same did not work for my sister's phone.
She had never rooted her phone or tweaked it in any way but suddenly one day it started bootlooping. I tried MANY guides, wiped everything, and tried a custom ROM but /data wouldn't mount. Even Odin aborted installation. I left it as a lost cause for 2 months.
Today I completely uninstalled and reinstalled Kies, installed the USB drivers and tried this guide, and used "Open Austrailia". I used Odin with pit. Somehow it worked!
Re-partition was ticked and I used the bootloader as well. Just follow the video, even if it's not your country's firmware.
Click to expand...
Click to collapse
I've tried your suggestion, and it worked perfectly!
After flashing the Open Australia firmware, I've download the brazilian one, repacked and flashed. Now it's all back to the normal!
Thank you very much
Sent from my GT-P3110 using XDA Free mobile app
Boot loop
My GT-S5830i is stuck in the boot loop.
When booted into Android system recovery, it fails to wipe data/factory reset with
E:format_volume:rfs format failed on /dev/stI11
It won't boot into download mode.
Can it be fixed with an update via sdcard ?
Failing that, does anybody want it for spares !!!
5830i stuck at logo
deleted post
Hi everyone, please help me with this problem. My phone is a J5 Sm J500m, with 6.0.1 andrioid and root with Odin and CF Autoroot.
The phone was working great (root and system all working smoothly) until I F***ed Up by deactivate in the menu de feature "OEM UNLOCK" and restarted the phone and i got a message saying "Custom binary blocked by FRP".
I have tried to re-root with odin and of course i cant do it beacause of the FRP block, my question is: how can i bypass this block because the system works well i just cant fix this issue.
Thanks to everyone
tryser said:
Hi everyone, please help me with this problem. My phone is a J5 Sm J500m, with 6.0.1 andrioid and root with Odin and CF Autoroot.
The phone was working great (root and system all working smoothly) until I F***ed Up by deactivate in the menu de feature "OEM UNLOCK" and restarted the phone and i got a message saying "Custom binary blocked by FRP".
I have tried to re-root with odin and of course i cant do it beacause of the FRP block, my question is: how can i bypass this block because the system works well i just cant fix this issue.
Thanks to everyone
Click to expand...
Click to collapse
Go to SamMobile download the firmware for your device and flash it with Odin.
After that just check OEM unlocking and re root.
PalmCentro said:
Go to SamMobile download the firmware for your device and flash it with Odin.
After that just check OEM unlocking and re root.
Click to expand...
Click to collapse
Hello there, i follow your directions, went to sammobile and download the firmware (choose de correct country) and i flash it with Odin,everithing went as it should and got the "PASS" on odin, but at the restart of the phone it got stuck in he samsung logo forever, i restarted the phone but it keeps getting stuck in the samsung logo.
¿What should i do? thank you for your help men
tryser said:
Hello there, i follow your directions, went to sammobile and download the firmware (choose de correct country) and i flash it with Odin,everithing went as it should and got the "PASS" on odin, but at the restart of the phone it got stuck in he samsung logo forever, i restarted the phone but it keeps getting stuck in the samsung logo.
¿What should i do? thank you for your help men
Click to expand...
Click to collapse
I would say you should boot into recovery and wipe cache, if it doesn't help make a full wipe.
It can sometimes take time till it boots....
PalmCentro said:
I would say you should boot into recovery and wipe cache, if it doesn't help make a full wipe.
It can sometimes take time till it boots....
Click to expand...
Click to collapse
I did everything you said and it work! thank you so mucho.
ONE last question, the firmware is running andrioid 5.1.1, so i tried to update the the software. when i click, on "software update" it says "registering device" and then it pops out processing failed.
I teliminated the data of "software update" from application manager but i still cant update the software.
thanks a LOT men :good:
tryser said:
I did everything you said and it work! thank you so mucho.
ONE last question, the firmware is running andrioid 5.1.1, so i tried to update the the software. when i click, on "software update" it says "registering device" and then it pops out processing failed.
I teliminated the data of "software update" from application manager but i still cant update the software.
Click to expand...
Click to collapse
You can manually do it via sammobile or via Samsung Kies.
PalmCentro said:
You can manually do it via sammobile or via Samsung Kies.
Click to expand...
Click to collapse
I fix everything! Thanks men:good::good::good::good::good:
Hi everybody,
Yesterday I decided I wanted to root my S6 Edge phone (SM-G925F, International Version) and flash a custom ROM onto it. I managed to root it successfully and install a working version of TWRP.
I began installing the XtreStoLite Custom ROM onto my S6 Edge. Around the 10% mark of installation, my phone suddenly booted. I read online that I should boot back normally and install an app which reduces my CPU power or something like that, can't really remember. But when I tried to boot back normally, it was stuck in a boot loop with only the Samsung S6 Edge logo appearing.
During installing TWRP I bricked my phone a couple of times because I installed wrong versions of TWRP. I flashed a stock firmware a few times to get rid of the brick (a similar bootloop), which worked every time like a charm.So I figured that with this "Custom ROM bootloop", I can just flash the stock firmware, boot everything back and try again. But after flashing the previously so glamorously working stock FW, I was stuck in a bootloop way worse than before.
This time the phone starts, I get the S6 edge logo, I get a "installing software update" screen for about a millisecond and then a "no command" screen. After the latter, it repeats. Once repeated for - I don't know - a 1000 times, it boots into stock recovery.
I tried factory resetting, which only gets rid of "software update" and "no command" screens. The bootloop stays.
What do you suggest I do? Can I do anything? Could it possibly work with 'another' stock firmware file?
Thanks in advance :good:
Probably you end up with dm verify verification error, drk issue, try to flash back stock firmware using repartition and a pit file to see if will fix your issue
Thanks for the quick reply mate. Just to get this right, I don't want to mess anything else up: first, I download a new firmware from lets say, SamMobile. When flashing with Odin, I check the box re-partition. What do I do with the pit file? If I download the FW from SamMobile, I'm supposed to get a CSC file right? With the pit file inside of it? Will Odin recognize it just like that (from the CSC file)?
you must download pit file and add in pit file, depending on your csc code of firmware you want to flash search that pit file on google
Okay, thanks. I googled and found this website: droidviews.com/download-pit-files-for-galaxy-s6-edge-all-models/
You figure I could just use a pit file downloaded from there? Or should I worry about 32GB / 64 GB pit files?
Also found this website: sammobile.com/forum/showthread.php?t=30136
It has an "SM-G925F OXA multi CSC ( BTU CPW DBT ITV KOR NEE XEF XEO XEU )" pit file. My S6 Edge is NEE region marked. Is this any better than the 'droidviews' one? Is it possible to tell or are they one and the same?
jalle65 said:
Also found this website: sammobile.com/forum/showthread.php?t=30136
It has an "SM-G925F OXA multi CSC ( BTU CPW DBT ITV KOR NEE XEF XEO XEU )" pit file. My S6 Edge is NEE region marked. Is this any better than the 'droidviews' one? Is it possible to tell or are they one and the same?
Click to expand...
Click to collapse
You need this firmware
http://updato.com/firmware-archive-select-model?record=85560321743B11E7963AFA163EE8F90B
And this pit file
https://mega.nz/#!rERH1LqK!QSYjirrXtPjKc1giOahnZI0BrWR2WXMg0GI3ZR3LLeY
Or just try to flash your original firmware
Ok so, I flashed the FW callumbr1 suggested, with the required pit file. Something happened! The phone now boots from the S6 Edge screen all the way to the next screen, the one with 'Samsung' text on it. The logo keeps flashing, with it never going away. So still in bootloop, but a little different one.
What now? Thanks for all of the advice thus far!
Its working! Oh thank each and every God, but most of all you guys.
So the phone was stuck in the Samsung boot logo. I booted into recovery, wiped cache, no result. 2nd try, I boot to recovery, do a factory reset, and it SEEMED like it was still in boot loop, with the logo flashing. I went to take a leak and my God, that leak turned out to be a leak of faith. I came back and the phone had booted. Now it seems to work normally.
Thank you so much!
jalle65 said:
Its working! Oh thank each and every God, but most of all you guys.
So the phone was stuck in the Samsung boot logo. I booted into recovery, wiped cache, no result. 2nd try, I boot to recovery, do a factory reset, and it SEEMED like it was still in boot loop, with the logo flashing. I went to take a leak and my God, that leak turned out to be a leak of faith. I came back and the phone had booted. Now it seems to work normally.
Thank you so much!
Click to expand...
Click to collapse
It's because the glowing Samsung logo is not actually a bootloop.
It's just on that logo while the phone builds the firmware. Usually takes about 10-20 minutes on that logo screen. Glad I could help and it's all working :good: thanks the posts if you can
Is your s6 edge bootloader unlocked? If so, how?
I am unable to load TWRP as my bootloader is locked, and can't find a solution anywhere. Any pointers?
callumbr1 said:
You need this firmware
http://updato.com/firmware-archive-select-model?record=85560321743B11E7963AFA163EE8F90B
And this pit file
https://mega.nz/#!rERH1LqK!QSYjirrXtPjKc1giOahnZI0BrWR2WXMg0GI3ZR3LLeY
Or just try to flash your original firmware
Click to expand...
Click to collapse
I'm in the exact same situation as the OP,with the exception that i cant even get to recovery
(I got the phone in that situation tbh so i dunno what happened)
I tried to flash the firmware and the pit file you provided but i got a cm.img error and binary error device 5 binary 4.
So i guess device had newer os installed.
I'm now trying to download(those sammob speed limits ) the newest btu file my question is the pit file you provided is for every btu firmware or do i need another one?
razenxd said:
I'm in the exact same situation as the OP,with the exception that i cant even get to recovery
(I got the phone in that situation tbh so i dunno what happened)
I tried to flash the firmware and the pit file you provided but i got a cm.img error and binary error device 5 binary 4.
So i guess device had newer os installed.
I'm now trying to download(those sammob speed limits ) the newest btu file my question is the pit file you provided is for every btu firmware or do i need another one?
Click to expand...
Click to collapse
Yes try the latest firmware.
The pit file will work for every btu firmware aslong as you have G925F. If it fails quote me and I'll try to help further
callumbr1 said:
Yes try the latest firmware.
The pit file will work for every btu firmware aslong as you have G925F. If it fails quote me and I'll try to help further
Click to expand...
Click to collapse
I've downloaded the latest BTU firmware with samfirm and flashed it along with the pit file
Again i got the updating screen which was already on 25% jumped to 32% and then got to erasing screen in which the refreshing icon froze.
I'm waiting for it to make something but nope.
razenxd said:
I've downloaded the latest BTU firmware with samfirm and flashed it along with the pit file
Again i got the updating screen which was already on 25% jumped to 32% and then got to erasing screen in which the refreshing icon froze.
I'm waiting for it to make something but nope.
Click to expand...
Click to collapse
See if you can manually boot to recovery. If so then wipe data and cache and reboot
callumbr1 said:
See if you can manually boot to recovery. If so then wipe data and cache and reboot
Click to expand...
Click to collapse
i can't.
It passes in some milisecs the updating screen and gettting me to the no command screen.
razenxd said:
i can't.
It passes in some milisecs the updating screen and gettting me to the no command screen.
Click to expand...
Click to collapse
Hold down and power until it completely reboots. As soon as it goes off switch to recovery combo and keep holding
callumbr1 said:
Hold down and power until it completely reboots. As soon as it goes off switch to recovery combo and keep holding
Click to expand...
Click to collapse
That's what i do, and i get what i said in the previous post
Now will try and give a flash the 4 file btu repair firmware which i downloaded from samfirm app along with the
ZEROLTE_EUR_OPEN.pit
Should i also check repartition and nand erase all in odin?
razenxd said:
That's what i do, and i get what i said in the previous post
Now will try and give a flash the 4 file btu repair firmware which i downloaded from samfirm app along with the
ZEROLTE_EUR_OPEN.pit
Should i also check repartition and nand erase all in odin?
Click to expand...
Click to collapse
Only check repartition if you flash a pit file. Don't select nand erase
callumbr1 said:
Only check repartition if you flash a pit file. Don't select nand erase
Click to expand...
Click to collapse
That's what i did.
Fingers crossed
Edit: Now stucked in galaxy s6 edge screen before samsung logo.
Edit 2 : Tried to access recovery, phone got again in system update screen and then stuck on erasing
rebooted then tried to access recovery again and got the no command screen again.
Edit 3 : After several attempts to access recovery it got me to the black screen before the wipe options of recovery appeared and phone hang up.
It has the following
No Support SINGLE-SKU
Supported API: 3
#MANUAL MODE v1.0.0#
Appling Multi-CSC
Applied The CSC Code :XEO
Succesfully applied multi-csc
Hum, just noticed in download mode that the device has on the reactivation lock.
Could that be one problem that i face?