Hello I bought this product http://www.staples.com/Nobis-7-inch-8GB-Tablet/product_1052513
But I cant find anything to root it can anyone please help?
darkphate83 said:
Hello I bought this product http://www.staples.com/Nobis-7-inch-8GB-Tablet/product_1052513
But I cant find anything to root it can anyone please help?
Click to expand...
Click to collapse
As an alternative, is there a way to install CM-10 or CM-11 on it? (yeah, I expect if no developers have one here, it might be difficult to develop an image for it). For now I haven't needed to root it, as it's doing what I need for now, but if I want to start moving apps (or app data) off to a microSD card, I may need a root or CM1x version (and Google needs to be *smacked* for disabling SDcard functionality in later Android versions).
I have just purchased one of these NB7022S tablets from Staples as well. I have unsuccessfully been trying to root it for the last couple of days. Any help would be greatly appreciated
I have one of these Nobis NB7022s tablets as well, but the screen has been broken. So since the tablet isn't usable in it's current state, would it be of use to someone to do a teardown/analysis of the device in order to make a CyanogenMod port to it?
success
Just rooted the nb7022s using kingo root. First download the android software developer kit on your pc then open the sdk manager and download every possible update in order to have the correct drivers, not sure which one did the trick because i just downloaded everything. Then in your tablet go to settings-about tablet- then scroll down to build number and click 7 times to unlock developers options on the main settings screen. Go to developers options and turn it on and enable usb debugging. Plug tablet into your PC and install and run kingoroot. Should connect and root your tablet and automatically install superuser. Now I just need to figure out what version of clockworkmodrecovery to flash as recovery because this tabket does not have a supported cwmr, any help on that would be awesome because i dont want to brick my very first rooted device lol. Hopefully this info might help another newbie like myself.
thanks buzzdb666 for the tip on rooting. However, now every time I turn off the tablet and on, it always does a factory reset/wipe so I have to reinstall everything . Wondering if you've encountered the same thing?
Would be an interesting experiment to try, but again, the tablet has a broken screen, and I can't have a mouse *and* a connection to the computer at the same time. I had thought I could at least get the debug info from the tablet in case someone wants to develop an image for a non-broken unit. Once again, it's available if any XDA developers would like to use it for tear-down or testing, since I can't do much with it otherwise. Unless there's a way to extract what someone would need via a microSD card.
Mine is doing the same thing after using Kingo Root. Not sure what can be done since I can't go backwards now.
Welcome to my tutorial !
You can find others tutorials related to the Cube i6 :
Install windows 10
Install Android 4.4.4 (Stock & RemixOS)
I received the magnificent AllDoCube i6 Air 3G last week, and i've been struggling since to get updates,
firmware flashing and all of that working, I searched the whole web and the drivers/Firmwares are nowhere to find,
but on some chinese proxy-needed sites sometimes, or baidu which is a pain in the a** to download from.
So I decided to share the ways to update this tablet at all costs (heh, no worries, -NORMALLY- it wont brick)
Disclamer: This process might contain ROM hacking, this is for advanced users.
THIS TUTORIAL HAS BEEN TESTED ON i632GB1537XXXXXXX MODEL, AND WORKS ON IT,
WHEREAS IT HAS BEEN REPORTED THAT i632GB1522XXXXXXX MODEL BRICKED UPON DOING IT,
SO PLASE DO IT CAREFULLY, IF THE INSTALL VERSION IS 202 YOU SHOULD THINK ABOUT IT BEFORE TRIYING AS IT COULD BRICK!
Software included may be subject to copyright.
Flash your device at your own risk. Developer is not responsible for what you do on your device.
What you need:
Cube i6 Air (3G or Wifi)
Flash Drive (256Mo +)
OTG cable
USB Hub (3 Ports recommended)
EFI BIOS Firmware
DOWNLOAD THE FIRMWARE BEFORE STARTING SO EVERYTHING IS AVAILABLE WHEN YOU DO IT
https://drive.google.com/folderview?id=0B8YPw4HjmqNCZktOZy1OTEN2ZVE&usp=sharing
Get on the drive, go to your device folder, select the wanted version inside BIOS folder
What to do :
1.) Start by plugging the usb drive into your computer, and format it to FAT32 using any formatting tool
2.) Now you need to uncompress the downloaded firmware :
you will find a "Firmware_X.X.X" folder inside, take all of its content, and extract it to your freshly formatted drive.
here's what looks like the root of your usb:
3.) Your USB Drive is ready, now just plug the OTG cable to your tablet, plug your HUB onto that OTG
and fill it with your keyboard and the USB Drive just created.
4.) Press power button until you see the screen backlight, when you see it repeatidely smash "Esc" key on the connected keyboard.
You will see the bios 6 square configuration screen.
Hit "Boot Manager" and select your USB in the list.
5.) The tablet should now boot from your USB, booting to a UEFI Shell. Depending on your device, it might be either 64 or IA32.
Now you just let startup.nsh script do the firmware flashing init, it should drive you to a flashing BIOS screen.
6.) Follow instructions on screen and let the tool flash your BIOS automatically.
Once done, the tablet will shut down.
Congrats! You successfully updated your BIOS !
It is my first tutorial, i will post some photos of steps in the future so come back, the guide will be better soon !
Regards,
Max.
Hi,
I have bought the Cube i6 Air 3G a week ago and i'm still waiting for it to arrive.
Have you update the win 8.1 to win 10?
Does everything works correctly?
Regards
re
Hi, I successfully updated the BIOS as of now,
I changed the bootloader animation to nexus one on Cube ROM.
I also manager to boot on Android x86 but it had too many drivers issues.
Still, 4.4.4 stock cube is working and i reflashed to a new partition scheme of 9Go
and i'm currently testing some win10 pen drives for install, will keep you updated.
Édit: oh you were asking about thé tablet? Weil jack has default, charging takes hours, glass is plastic, firmware is pain but hell this is a goodamn good tablet for its price !
regards,
Max
stalker2106 said:
i'm currently testing some win10 pen drives for install, will keep you updated.
Click to expand...
Click to collapse
I achieved installing Win10 x32 Pro on Cube i6 Through hacking WinPE installation environnement, but now i'm struggling finding the drivers. touchscreen, battery and vital things like hd graphics are not working as of now. Will post a tutorial on how to install Win10 in given time when i'll get out of this mess!
My tablet has arrived yesterday.
From what the little i've used it, it has good performance especially in android.
A lot faster compared to my last android tablet (Cube U39GT).
Something i didn't like was the size of the icons and text in android, my next step is to root and change the dpi.
Regarding windows 10, i found in a chinese tablets blog with win 8 and 10 drivers.
I haven't tested it, but as soon as i find it again, i will let you know where to download them from.
You haven't tried the normal win 10 upgrade? From the microsoft icon?
gtbr said:
My tablet has arrived yesterday.
From what the little i've used it, it has good performance especially in android.
A lot faster compared to my last android tablet (Cube U39GT).
Something i didn't like was the size of the icons and text in android, my next step is to root and change the dpi.
Regarding windows 10, i found in a chinese tablets blog with win 8 and 10 drivers.
I haven't tested it, but as soon as i find it again, i will let you know where to download them from.
You haven't tried the normal win 10 upgrade? From the microsoft icon?
Click to expand...
Click to collapse
I did not try anything as i like "stock" versions of my windows, but tonight i got it working all the way !
My cube i6 is running perfectly windows 10 and oh my god what a paradise it is ! The tablet experience got way better onto that version.
Can you try to update from the icon you are talking about ? i'd be curious if it works. anyway, i'm currently writing+uploading for the win10
tutorial for this tablet, so you'll be able to flash it late tonight, or tomorrow.
EDIT: The dpi is correct in android, only the status bar icons and some other are not in correct dpi but that is KitKat issue I guess. still interested in resolving that though. I'm currently hacking android lollipop ROM also, i'll keep you tuned on that. For rooting, i used KingRoot, it worked, but after a reboot, it tells me "root" is wrecked, so i guess there is some investigation to do there, but I was mainly focused on getting windows 10 ENGLISH STOCK version running to share it with you guys.
EDIT2: Still uploading, but tutorial is here: http://forum.xda-developers.com/android/help/guide-how-to-install-windows-10-t3252042 and it should work on any Z37xx powered device. Enjoy !
Hello,
I'm using this tablet from 2 days now. great !
But, i got wifi problem after sleep : wifi chip cut and never found network anymore.
has to reboot, and all goes right.
same in win and android.
Did you hear about this ? many poeple complain about this.
Any trick or advice ? Is this bios correct this ? Is your bios work on i6 3g dual-boot ? (there is 2 bios for dual boot ?...)
Thanks !
Hi,
I've also have the same problem with the wifi.
I usualy disconnect the wifi and reconnect it, but sometimes it doesnt work and have to reboot the tablet.
I've not noticed it in windows but maybe it's because i'm using the tablet a lot more in android.
I've tryed to update to win 10 using the microsoft icon, but i got an error and was unable to complete the upgrade.
gtbr said:
Hi,
I've also have the same problem with the wifi.
I usualy disconnect the wifi and reconnect it, but sometimes it doesnt work and have to reboot the tablet.
I've not noticed it in windows but maybe it's because i'm using the tablet a lot more in android.
I've tryed to update to win 10 using the microsoft icon, but i got an error and was unable to complete the upgrade.
Click to expand...
Click to collapse
Hello, i have such a tablet for now about 6 Months and it is awesome so far (i often use win8.1).
My Tablet has also DUAL Boot with Android 4 and win 8.1 Bing.
I tried to upgrade to win10 but i also got a message that the partition can not be resized by windows. So i cant upgrade to win 10 with the normal tool from microsoft.
Is there any Solution yet to get this to work?
Anyway, i tried to boot from usb (win8.1 / ubuntu / gparted) but it is not working at all. When i try to boot true windows Advanced Boot Options, the BIOS says that there is no USB device.
When i use the EFI Shell to mount the USB Stick i can see that the BIOS has recognized the USB Stick.
I think that is all very strange, but i will try to update the BIOS soon. The serialnumber is not the same as from @stalker2106 but i will try it.
I hope there is a way to get win 10 working, but Ubuntu would be even better for performance.
Greetings from Germany.
tysonpower said:
Hello, i have such a tablet for now about 6 Months and it is awesome so far (i often use win8.1).
My Tablet has also DUAL Boot with Android 4 and win 8.1 Bing.
I tried to upgrade to win10 but i also got a message that the partition can not be resized by windows. So i cant upgrade to win 10 with the normal tool from microsoft.
Is there any Solution yet to get this to work?
Anyway, i tried to boot from usb (win8.1 / ubuntu / gparted) but it is not working at all. When i try to boot true windows Advanced Boot Options, the BIOS says that there is no USB device.
When i use the EFI Shell to mount the USB Stick i can see that the BIOS has recognized the USB Stick.
I think that is all very strange, but i will try to update the BIOS soon. The serialnumber is not the same as from @stalker2106 but i will try it.
I hope there is a way to get win 10 working, but Ubuntu would be even better for performance.
Greetings from Germany.
Click to expand...
Click to collapse
Check windows 10 Post, there is no need to update BIOS to fix this error, your USB has to be in GPT partition style, check answer on the other thread
But usually the bios update should work, as it did on my tablet. But why bother taking risk if you can get it working without it
Hi,
I have sucessfully updated to win10
I have bios 203 in my cube and serial i632gb1510xxxxxxxxxxx, does anybody have tried to update to 206 on such setup ?
What are the chances that I will brick my device ?
I have downloaded latest Cube i6 roms from cube site (may 2015) . There are two bios-es which have to be installed in chronological order.
Shall I do it first, and then try to update to 206 ?
Edit: I was not patient and tried it on my own.I have successfully updated bios and tablet has started to both android and windows
I will perform some functional tests afterwards.
Actual steps :
I have first downgraded bios to 201(provided here )
Flashed bios1 from link provided
Flashed bios2 from link provided
Flashed bios 206 from guide in first post
Edit2:
I have tested basic functionalities like : Gyro-sensors, WIFI, GPS, 3G network and yet everything works like charm.
Maybe a placebo, however I have the feel that android runs like two times faster
I do suggest to update the windows, however I take no responsibility if you will brick your device. Even if the setup is like mine, neither if it differs
Regards
Why do you first downgrade to 201?
What do you mean with bios1 and bios2?
Many thanks and question
Hello Stalker,
I am new here and i want to
thank you for the instructions!
I bought a cube i6 from china.
It is the 'i6 air remix',
So it should have only Android on it.
When it arrived. it didn't function.
The only think that happens is booting to theEFI-shell.
I could switch between Android and Windows in the boot settings.
But Android did not boot.
I have updated the bios with your instructions
now firmware 2.0.6 is installed.
But still i can not boot Android.
I found a few flash tools and android for the cube i6 .
But i don’t know what is the right version flash tool I have to use.
Maybe you have advise or the right android and flash tool in your google drive download area?
Kind regards and many thanks in advance.
jan-netherlands said:
Hello Stalker,
I am new here and i want to
thank you for the instructions!
I bought a cube i6 from china.
It is the 'i6 air remix',
So it should have only Android on it.
When it arrived. it didn't function.
The only think that happens is booting to theEFI-shell.
I could switch between Android and Windows in the boot settings.
But Android did not boot.
I have updated the bios with your instructions
now firmware 2.0.6 is installed.
But still i can not boot Android.
I found a few flash tools and android for the cube i6 .
But i don’t know what is the right version flash tool I have to use.
Maybe you have advise or the right android and flash tool in your google drive download area?
Kind regards and many thanks in advance.
Click to expand...
Click to collapse
The truth is, the 206 BIOS provided is hacked off i6 remix repository from cube, so i guess there is no big deal flashing it on your device as it works on regular i6.
Moreover, you can use any version of the flash tool as long as you flash a correct rom for your device, which i would suggest to download from official cube repository or geekbuying or so.
Android Geecbuying
Hello Stalker,
Ok. Thank you!
I will try Geecbuying.
Hopefully the windows drivers will function.
There isn't a way to flash from USB I suppose?
Greetings
Hi, well, actually, you should flash over USB with à windows computer. MFT by Intel is recommended. I shall make some tutorial about Android installation and partition resizing.
flash and resize partitions
That is super. When you want to do so.
I was indeed wondering or there would be one android partition on the tablet or two partitions (one for android, one for windows).
I also questioned myself how to see that there are partitions.
In earlier times when I was working with a pc, i use F-disk or partition-magic for this kind of work.
But on the tablet I do not have a clue...
So if you could make me wiser on this, I would be very thankful.
Maybe you could boot on some gparted liveusb? Or inside efi shell some commands could help
bluefish007 said:
Why do you first downgrade to 201?
What do you mean with bios1 and bios2?
Click to expand...
Click to collapse
no particular reason, I just wanted to know, which version of bios is in the latest firmware provided by geekbuying
Additional condition in my decision mechanism was that my serial did not match mentioned ones in w10 thread from stalker, so somehow I have used sleepy sloopy logic and tried to minimalize the risk (I know it have no rational reason and logic behind it at all)
Therefore, I tried the ones from geekbuying repository, to be sure to have latest provided from "official source".
greetings
thermoska said:
no particular reason, I just wanted to know, which version of bios is in the latest firmware provided by geekbuying
Additional condition in my decision mechanism was that my serial did not match mentioned ones in w10 thread from stalker, so somehow I have used sleepy sloopy logic and tried to minimalize the risk (I know it have no rational reason and logic behind it at all)
Therefore, I tried the ones from geekbuying repository, to be sure to have latest provided from "official source".
greetings
Click to expand...
Click to collapse
Ok thanks for the answer! So i can upgrade from 203 at 206 at one part or what do you think?
I Pre-Apologize If this Has been asked before My Interest at the current time is about developing a recovery image for my soft-bricked Nextbook Ares A11 Tablet android 5.1 64 bit Atom processor 1gb ddr3 ram if i remember correctly I was experimenting with trying to find a recovery image that i could flash to it and well Bricked I can however boot to some sort of bios hardware settings in it with the ability to boot from file and change manufacturer hardware settings ...I dont believe that is part of the android booting process but somewhere hardcoded! As for the android booting i no longer have the stock recovery<!--go figure--> but i still am able to access fastboot in download mode and i have the update firmware from the manufacturers for my specific device! Sorry if this seems like 2 questions If you could tell me wether i could flash the update to fix it has the boot.img in it also other files looks similar to how to root with file-systems anyways if you have no advice on how to unbrick my advice Here is the real question!! What matters when developing a recovery.img for a specific device what do i have to take into consideration as to hardware specs and software specs any good links to that would be awesome and for the final question how to distinguish my recovery partition type idk if it is MTD or BML I cant find the MTD folder so assuming it is BML I can also get additional info such as last_log or any of that I am able to USB boot the tablet into Kali Linux Sorry for Such a long and drawn out explanation I will revise my question if needed and possibly start two separate posts on this! Thanks in advanced i really appreciate the Help!!! XDA Rules
Update Tried to flash the update firmware boot.img snd now i also have a verity issue I think ive tried everything
maybe my answer is to wait until a flash recovery comes out for this tablet!
I have found a Temporary Solution for my Bricked Nextbook Ares A11 Given it is Buggy and you may need to experiment to get the WIFI working! I didnt yet!
I have read somewhere that you can take these Android_x86.ISO and compile the Kernel I Dont Know How YET but if you cant find one that Supports the Wifi chip then i think you'll have to compile the drivers with the Kernel!
If you can Find an ISO Image for this device that seems to work decent at least the WIFI Let me know please I'll be 4ever Grateful!
Here is my Temporary Fix!
While looking for Android Images to Install on my Nextbook I stumbled upon this webpage It has loads of Android ISO's for running inside a VM
http://www.android-x86.org/download
I used a Bootable usb to test then install the one That worked the best for me
The software on my Device was Buggy One ISO let WIFI work for the first boot then all of a sudden it stopped working.... on this one the touchscreen never worked! heres the ISO name---cm-x86-13.0-rc1.iso--<!--WIFI worked for the first boot-->
The other one is --Android-x86 6.0-- the WIFI never worked but the touchscreen does but not for a real long time!! I think if you get the kernels then custom build them to fit your device that would fix a Soft brick for any device that you could figure out how to boot a USB image on!
NextBook Ares 11a bricked
Grey-Dev said:
I have found a Temporary Solution for my Bricked Nextbook Ares A11 Given it is Buggy and you may need to experiment to get the WIFI working! I didnt yet!
I have read somewhere that you can take these Android_x86.ISO and compile the Kernel I Dont Know How YET but if you cant find one that Supports the Wifi chip then i think you'll have to compile the drivers with the Kernel!
If you can Find an ISO Image for this device that seems to work decent at least the WIFI Let me know please I'll be 4ever Grateful!
Here is my Temporary Fix!
While looking for Android Images to Install on my Nextbook I stumbled upon this webpage It has loads of Android ISO's for running inside a VM
http://www.android-x86.org/download
I used a Bootable usb to test then install the one That worked the best for me
The software on my Device was Buggy One ISO let WIFI work for the first boot then all of a sudden it stopped working.... on this one the touchscreen never worked! heres the ISO name---cm-x86-13.0-rc1.iso--<!--WIFI worked for the first boot-->
The other one is --Android-x86 6.0-- the WIFI never worked but the touchscreen does but not for a real long time!! I think if you get the kernels then custom build them to fit your device that would fix a Soft brick for any device that you could figure out how to boot a USB image on!
Click to expand...
Click to collapse
Hi can you give me the steps? my nextbook ares 11a is bricked OS and stock recovery are gone,I can get to fastboot and even the bios but that's it? Thanks so much for any help you may have..
Grey-Dev said:
I have found a Temporary Solution for my Bricked Nextbook Ares A11 Given it is Buggy and you may need to experiment to get the WIFI working! I didnt yet!
I have read somewhere that you can take these Android_x86.ISO and compile the Kernel I Dont Know How YET but if you cant find one that Supports the Wifi chip then i think you'll have to compile the drivers with the Kernel!
If you can Find an ISO Image for this device that seems to work decent at least the WIFI Let me know please I'll be 4ever Grateful!
Here is my Temporary Fix!
While looking for Android Images to Install on my Nextbook I stumbled upon this webpage It has loads of Android ISO's for running inside a VM
http://www.android-x86.org/download
I used a Bootable usb to test then install the one That worked the best for me
The software on my Device was Buggy One ISO let WIFI work for the first boot then all of a sudden it stopped working.... on this one the touchscreen never worked! heres the ISO name---cm-x86-13.0-rc1.iso--<!--WIFI worked for the first boot-->
The other one is --Android-x86 6.0-- the WIFI never worked but the touchscreen does but not for a real long time!! I think if you get the kernels then custom build them to fit your device that would fix a Soft brick for any device that you could figure out how to boot a USB image on!
Click to expand...
Click to collapse
Why not extract the device's kernel from an update file if possible?
I have tablet Teclast X10 Plus ((F2D6) Intel Z8300 Cherry Trail CPU. Android 5.1 only. Unable to find any information on how to root this device. Assistance will be appreciated. Thanking you.
Same here, no info from the company. Worse, we are theoretically supposed to be able to install Windows 10, but Teclast does not give any drivers for that. With only 2go of RAM, I don't care that much about Win 10, but not being able to root is frustrating. I've tried fastboot OEM unlock on the device, it said it worked, but it actually didn't
There's no OEM information for stock firmware flashing?
If you go there : teclast.com/en/firmware/ and type: f2d6 , then you have the only thing that they gave us, it's an Intel flash tool with the current firmware and android 5.1. I guess that there is something in there we could start with, but I'm not an expert. Other than that, the company give no support whatsoever and doesn't answer emails.
As for other information: I've tried to root with KingoRoot, it shows successful, my device rebooted, but seems to hang after the second boot stage, unable to load the O.S. anymore. I had to re-flash the device to fix it.
Somebody found a way to root: hispatablets.com/tablets-teclast/root-teclast-x10-plus-solucionado-t8419.html
I’ve never been that happy to know more than one language
If you need help with the instructions (in Spanish), just ask. I’ve tried and it’s working, my x10 plus is now rooted.
Still, the procedure is a bit clunky and I’m sure we can optimize the process (and fixed the reboot needed problem after the --daemon).
This is a good step and it seems like with this and the package given by Teclast we have enough information to do a lot of things… Still, there is work to do…
how i can get dualboot? I need windows 10 / android version but unfortunatelly i bought android only
Found a review saying this tablet has 'upside down' problem. Basically, it displays some apps upside down and there's no way to fix it.
Do you experience that too?
Flyagaric : It's not impossible, but it is super easy to fix (for those with this bug), you just choose one particular position (I suggest landscape), you go in options and lock the rotation. Every apps will properly open in the current position.
i recently was given an nextbook 10a and it works but is forever stuck at the boot screen "nextbook powered by android".
i can get into recovery and factory wipe, etc but makes no difference. ive also gone to nextbook website but there isnt any support for this device.
is there anyway to reflash entire device restore to stock rom via usb cable and software
model # nx16a10132sps
fcc id# s7jnx16a10132sp
ekoms420 said:
i recently was given an nextbook 10a and it works but is forever stuck at the boot screen "nextbook powered by android"....
Click to expand...
Click to collapse
I don't have this device and i can only locate 1 thread where you might be able to obtain some member guidance within that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3654507
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Do you think it could possibly be a Windows tablet and someone tried flashing Android on it I posted the model number and what not I could post a photo of the recovery because it's all good it's all like lines through the words and stuff like this just a thought I had
ekoms420 said:
Do you think it could possibly be a Windows tablet and someone tried flashing.....
Click to expand...
Click to collapse
Your question is a valid one that prompted me to perform a quick Google search using the model number and such and after looking at a little over a half dozen results, I came to the following conclusion.
This came with Android 6.0 and was a budget Tablet that costs approximately $100.00 +/- brand new.
It seems as though the individual who had given you the tablet may have been unsuccessfully attempted one or more actions like Unlocking, Rooting, etc...
With a very limited amount of resources available for this device, there's really not much out there for help but, I'm not stating that there's no help. It's more of where to find it that's the challenge.
I wish that I could be of more help...
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Thank you very much for your time and help. At least I know it was most likely someone's fuk up then faulty
Still been messing with it cuz I have hope it's just soft breaking set but I got into the recovery log files going through them I found this one section I screenshotted check it out it's the same bored as the 8a 16gig version of what not so like those other post around where is has been mentioned to use the 8a Twrp etc on the 10a because it's the same board. This tablet is like the 2nd or 3rd gen that came out 2017 which has like at all winners CPU or something instead of Intel or something like that I've read somewhere and it also has Android nougat 7. 1 out the gate. So in theory I should be able to put that 8a twrp & boot Image to match on this one and then downgrade to 5. 1 or do something like remix Os or something custom.
??!?!?!!!!??????
so how the puck do I put a picture attached of the recovery log.
ekoms420 said:
i recently was given an nextbook 10a and it works but is forever stuck at the boot screen "nextbook powered by android".
i can get into recovery and factory wipe, etc but makes no difference. ive also gone to nextbook website but there isnt any support for this device.
is there anyway to reflash entire device restore to stock rom via usb cable and software
model # nx16a10132sps
fcc id# s7jnx16a10132sp
Click to expand...
Click to collapse
I have the same tablet I think. I can turn on and off and boat into recovery(words are faced and have lines through them) but I'm its staying stuck with Nextbook showing on screen. I'm trying to find stock or something so I can flash and get it fixed. Its a Nextbook 10" Model:NX16A10132sps. FCC ID: S7JNX16A10132SPS. Ill let you know if I find anything
I have both A64 and Intel versions.
The twrp for the 8a DIDN'T work on the A64 when I tried it.
It DOES work on the Intel.
If you can get to stock recovery and its messed up looking with the lines and stuff, that's the A64 version.
Don't hesitate to ask if anyone needs help if it's Intel.
My A64's are both bricked still so i'd be useless there.
Here are my backups from the Intel version.
Ares10a_NXM1021CAP_ES-IntelAtom-[NX16A10132SP-S] - Google Drive
drive.google.com
And how to tell exactly which you have.
Trying to help a friend fix a Nextbook NX16A10132S/NXM1021CAP that is caught in a boot loop.
This is an Intel Atom based unit.
FTM mode is accessible (limited adb command support).
DNX mode is accessible (limited fastboot command support).
Based on the information in the build.prop file, it would appear to be an Android 6.0.1 system: ro.build.description=NXM1021CAP-user 6.0.1 MMB29M 20160919.050843 release-keys.
I cannot find any ROM, Update or image files for Android 6.
I would attempt re-flashing the unit to Android 5, but the image files linked to your post do not include the android_system or android_data partitions.
As I understand it, the android_data partition only holds user data and consequently does not need to be flashed, it only needs to be wiped, but the android_system partition is a must.
Do you know if stock Android 6 firmware is available anywhere?
If not, do you have a stock Android 5 image of the android_system partition?
Or, if I am completely off course, can you please advise?
Any help would be greatly appreciated.
Thanks in advance.