Thought I'd start up a dedicated thread for this case.
http://www.amazon.com/gp/product/B00MJXK8VM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
At an average of under $10 on Amazon, this case is a quarter of the cost of the official case. It adds the protection of a hard cradle that the tablet sits in, which the official case doesn't offer.
Based on the popularity of the case on Amazon, I'd suggest NVidia may lose some sales of the official case to ProCase.
One thing to consider is that this case might interfere with passive cooling as suggested in https://forums.geforce.com/default/topic/767648/shield-tablet/3rd-party-case-/
For that price, I'll drill vent holes in it if necessary. ?
In going to take the risk and have ordered one.
Looks nice, I have a similar case for my Nexus 7 but I don't want the back all covered up. I'm still holding out for a cover that snaps into the bottom of the tablet (like the official cover).
I kinda wish there was a really snug bumper for it with a lip that would cover the harsh bezel edges with rubbery comfort.
Sent from my iPhone using Tapatalk
Xephrey said:
I kinda wish there was a really snug bumper for it with a lip that would cover the harsh bezel edges with rubbery comfort.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Yeah, they really are rather sharp. Not quite sure why they decided to go that way with the design.
I ordered one of these and it just shipped today. I probably won't get it until late next week (US holiday on Monday) but I can take pics and give some basic impressions when I get it if any is interested.
phobic99 said:
I ordered one of these and it just shipped today. I probably won't get it until late next week (US holiday on Monday) but I can take pics and give some basic impressions when I get it if any is interested.
Click to expand...
Click to collapse
Mine shipped today as well. Won't get mine for a few weeks until it ships to Australia.
...
jaredmorgs said:
Mine shipped today as well. Won't get mine for a few weeks until it ships to Australia.
Click to expand...
Click to collapse
Right, it's winging its way over to me with the shield controller. Should have them in about 3 or 5 days.
Mine arrived yesterday; I got the green one. I very much like the protection provided by the snap-on case and the magnetic cover "latches" nicely in the closed position. Opening the cover does wake the tablet which is also nice.
The cover folds back but does not seem to magnetically "latch" to itself or the rear of the case in either the "keyboard" mode, the "movie" mode, or folded flat against the back of the case. The "keyboard" mode works easily enough as the weight of the tablet holds it in position but the "movie" mode doesn't work well for me but perhaps the cover joints will loosen up a bit and work better over time.
I find the protection aspect (and price) of this cover to be far superior to the nVidia case but the nVidia case works far, far, better as a stand than this one does, at least mine.
<edit> Please see additional comments and retraction in the next post. </edit>
I retract my previous statement regarding the cover not magnetically latching to itself in the "movie" stand mode. There is a magnetic clasp there but you have to fold the cover into the proper geometrical arrangement which I clearly had not been doing. When done properly, the cover does indeed snap to itself quite nicely and the tablet stands up properly for viewing a movie.
This is an excellent case and priced, in my opinion, lower than it is worth. :good:
Well I ordered the red one off of amazon, should be getting it tomorrow along with my 64GB Samsung SD card. Hopefully will have my shield next week, have to wait for Best Buy to ship it.
Update: I received my case, and I have to say I was actually impressed with the quality of the case. Much better than I was expecting. My Shield shipped already so I should have it soon.
Just got mine. Nice case.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N900T using Tapatalk
@aznmode, yeah just got mine. Same colour as yours. It's performing great for me. I just wish the magnetic clasp was able to grab onto something more secure when it is in "stand mode". I find the magnet sometimes pops loose for me. It's trivial to reaffix it again, so for the price I'm certainly willing to turn a blind eye to this behavior.
With the Procase, do any of you guys notice the shield getting hotter than usual?
Jaybenosa said:
With the Procase, do any of you guys notice the shield getting hotter than usual?
Click to expand...
Click to collapse
I played HL2 last night and it got as hot as it did when I didnt have a case. There aren't really any vents on the tablet that it covers, so I don't see how it could affect it. If anything it should act as a heat sync and help with the heat.
Sent from my SM-P600 using Tapatalk
aznmode said:
I played HL2 last night and it got as hot as it did when I didnt have a case. There aren't really any vents on the tablet that it covers, so I don't see how it could affect it. If anything it should act as a heat sync and help with the heat.
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Ok Thanks for the quick reply. I'm debating if I should order this case as well as the controller or order the official cover
Jaybenosa said:
With the Procase, do any of you guys notice the shield getting hotter than usual?
Click to expand...
Click to collapse
I played Sky Force 2014 (not Tegra enhanced, but pretty graphically rich for a shmup) and immediately after ending my 2 hour session of almost non-stop gaming, I opened System Monitor (app) and my temp was 40 deg Celsius. My Nexus 7 was climbing up to about 60 deg Celsius on the same game.
How is it when you have the covert folded back but flat against the back of the shield? does it lay completely flat? Can someone post a picture if they have it please.
Jaybenosa said:
How is it when you have the covert folded back but flat against the back of the shield? does it lay completely flat? Can someone post a picture if they have it please.
Click to expand...
Click to collapse
It lays practically flat, with just the smallest amount of rake down from the cover fabric hinge to the metal clasp.
Hope it helps.
Thanks @jaredmorgs!!! I was waiting for someone to show a pic before I order it.
Related
Someone posted in the huge @ss thread that they thought the Kindle DX was about the same size as the GTablet.
I went ahead and ordered this:
http://cgi.ebay.com/Kindle-DX-Leath...&otn=4&po=LVI&ps=63&clkid=5004332251969071237
I'm happy with it so far, the DX is about half and inch wider, height is okay, so it can slide around a bit. I put some stick on velcro on the case and on the GTab, it isn't going anywhere now. I think I'm going to have to use superglue for the velcro on the case though, it's felt lined so it won't stick on for long. The only thing is the top elastic band is close to the power button, maybe Roebeet's electrical tape solution is in order.
UPDATE: Oh, well my fake pleather case has ding in the edge now. Maybe I need to get some of that liquid leather. ;P Happy with the sizing, just need to find something more durable. Maybe I'll use some of that new fangled electrical tape I hear is the new duct tape.
Electrical tape is the new duct tape:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I need to do something like that, was thinking of a little piece of sticky backed foam, like 1/4 ince or so, think I have some perfect for that around here somewhere.
Hitting that power button is way to easy to do, need to mod the physical keys on the side somehow also, lol.
I found an iPad case on amazon for $14.95 that has good potential. go to amazon and search for "Acase Leather Flip Book Jacket/folio for Apple Ipad 3g Tablet/wifi Model 16gb, 32gb, 64gb (Black)" in Electroincs.
Mike Mortazavi said:
I found an iPad case on amazon for $14.95 that has good potential. go to amazon and search for "Acase Leather Flip Book Jacket/folio for Apple Ipad 3g Tablet/wifi Model 16gb, 32gb, 64gb (Black)" in Electroincs.
Click to expand...
Click to collapse
Mike, I'd be careful. I've looked at several ipad cases but the gtab is taller and not as wide as the ipad. Most I've seen dont fit unless it's a universal case.
Sent from my GT-I9000 using XDA App
Thanks for the heads up. I'll keep looking.
Well, I'll let you know how the Acase you listed works... I ordered one last night.
Whoops!
Krissy
I purchased a Solo Classic iPad/eReader portfolio case from Staples that was around $30.00. The downside is that the power button is covered by one of the soft cloth corner holders, but other than that it has worked fine.
Staples item No 912506
I purchased form fitting leather case for kindle DX from ebay . The G tablet fit amazingly well in it. The only problem is that the upper left strap is blocking the charger plug .
Looks good!! Maybe a hole punch can make your life easier.
I think this one looks promising too: http://www.amazon.com/gp/product/B002QHZ6L8
bousquet said:
Looks good!! Maybe a hole punch can make your life easier.
I think this one looks promising too: http://www.amazon.com/gp/product/B002QHZ6L8
Click to expand...
Click to collapse
Did you buy this one? If so, did it work well?
ckelly33 said:
Did you buy this one? If so, did it work well?
Click to expand...
Click to collapse
I just order that case last night, will review it soon
dingoberries said:
I just order that case last night, will review it soon
Click to expand...
Click to collapse
I just ordered mine last night too! I got the genuine leather version in fuschia . Said it should be here between the 21st and the 24th so I'll definitely post some pictures when it arrives.
nicholas621 said:
I purchased form fitting leather case for kindle DX from ebay . The G tablet fit amazingly well in it. The only problem is that the upper left strap is blocking the charger plug .
Click to expand...
Click to collapse
how tight the elastic band holding the tablet? will it slide out when you carry it around? I am thinking to purchase one right now.
tyy10002 said:
how tight the elastic band holding the tablet? will it slide out when you carry it around? I am thinking to purchase one right now.
Click to expand...
Click to collapse
The band was tighter when I first got it (infact it was so tight that it keep randomly turn on my tablet). After a few days it loosen up so the problem resolve itself. I carry it around ,always rushing to class and it feel pretty secure imo.
Lindarose84 said:
I just ordered mine last night too! I got the genuine leather version in fuschia . Said it should be here between the 21st and the 24th so I'll definitely post some pictures when it arrives.
Click to expand...
Click to collapse
LOL! I didn't know what fuschia is. Had to look it up.
Mine is also coming on the same days as yours. Hopefully it can come before Christmas so I can so I can re-wrapped my gift.
Anyone try an Oberon Kindle case? I just found them on the web. Very nice looking.
Site link http://www.oberondesign.com/KindleDX.php
...haven't figured out cut & paste on my g tablet yet, otherwise would link some awesome case pics from their site.
Just placed and order for the genuine leather case front Amazon.will post pictures once I get it.
it2steve said:
Mike, I'd be careful. I've looked at several ipad cases but the gtab is taller and not as wide as the ipad. Most I've seen dont fit unless it's a universal case.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Yep. Almost all cases for iPad do not work, since the G is wider.
Happy though with my $10 Case logic (like the zip pouch).
Found this one in E-bay. looks more comtempory and cheaper..
http://cgi.ebay.com/GREEN-POUCH-CAS...306?pt=LH_DefaultDomain_0&hash=item563456485a
They also have black.. I like the green one..
Quick Review...yes its copied from the other thread that I posted in. But I figure plagiarizing my own stuff is ok. Plus, there are pictures now!
Material: Definitely not real leather. Is PU Leather but doesn't feel "cheap" in the hand either! Inside of the case is a velvety "soft" material...I guess a cloth version of suede is the best way to describe it. (Definitely not Alcantara like the stuff I have in the bucket seats of my car.)
Workmanship: Can't complain here either surprisingly! I was expecting it to be well, just ok....but the stitching is straight and even, uniform distance from the edges (yeah I'm sure there are tenths of mm variations but...nothing distracting.) Holes for camera, proximity sensors, buttons, etc. are PERFECTLY aligned when the TF is properly inserted.
Closure: Magnetic...decent snap to it. There's magnets on BOTH ends of the case so it is quite secure.
Holding Mechanism: One of the weaknesses of this case. It has a flap that is on the landscape edge facing into the spine of folio case. Should have put a magnet or two in there to keep the flap more securely closed. Or Velcro. I think I'm going to add some velcro there myself. On the other hand, I think it is far better to have the flap on this side than along one of the portrait edges of the Tablet.
Stand angles: 2 actually, one inverted "low position" suitable for typing. One high angle for casual viewing I guess.
Conclusion: 1 thumb up--not two--because of the ridiculous pricing on these cases, $28 including shipping. Seriously, these things can't cost more than $5 in China where they are made.
Pictures:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can you get to the charging port while it is in the case?
Sent from my ADR6400L using XDA App
ctinsley said:
Can you get to the charging port while it is in the case?
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
Looks like there's a cutout in the tuck in flap but no cutout on the main cover. My guess is you can charge the transformer while in the case but that the cover has to be open.
Where did you get it? Was this one of the generic eBay ones?
I just got this case today (took about two weeks to arrive), and I'm thoroughly satisfied. It has holds for everything, even the Micro SD slot. Most importantly, the Transformer feels protected.
I just received mine today. I bought the brown version. It fits OK but overall the case is not of the highest of quality for instance there is a finger size mark on the front of the case. Can't help thinking in a couple of weeks the transformer will be slipping inside of the casehousing.
The listing on eBay said leather and I am going to complain and request a partial refund because it is definately not leather being some kind of ruberised finish and a joke of an attempt to show leather grain. I feel like I have been mislead....
tophkw said:
http://www.aliexpress.com/product-f...ree-shipping-wholesalers.html?CatId=100008232
there is a multi-angle adjustment case
Click to expand...
Click to collapse
Why are there so many people trolling the "FolioGuard" case in everyone else's threads? WTF? People KNOW there's the FolioGuard case. The point is THIS ISN'T THE FOLIOGUARD CASE AND IS A REVIEW OF A DIFFERENT CASE.
SoCalTiger, I got this one from eBay. Here is the link:
http://cgi.ebay.com/ws/eBayISAPI.dl...&ssPageName=ADME:X:RTQ:US:1123#ht_5978wt_1018
I'm beginning to wonder whether this one IS genuine leather and NOT PU leather at all. I've "aired" it a good number of days and it STILL smells/feels like leather. The patterned marks don't seem to be pressed/printed into the case at all. There's a few other tests I can "run" to see if its real leather or not (including the "match" test, but I don't really want to ruin the case either).
Thanks!
verkion
andyzarins said:
I just received mine today. I bought the brown version. It fits OK but overall the case is not of the highest of quality for instance there is a finger size mark on the front of the case. Can't help thinking in a couple of weeks the transformer will be slipping inside of the casehousing.
The listing on eBay said leather and I am going to complain and request a partial refund because it is definately not leather being some kind of ruberised finish and a joke of an attempt to show leather grain. I feel like I have been mislead....
Click to expand...
Click to collapse
Can you send/post the link for the one you ordered that you are not happy with? There DEFINITELY was NO option for "another color material" for this case. Just the variation in stitching color.
http://cgi.ebay.co.uk/Asus-Eee-Pad-...I&otn=3&po=LVI&ps=63&clkid=419235527009776241
3 different colours. Think I saw your link to the seller originally or you posted on the same thread I was reading. They were selling different colours under another listing. Anyway from the pictures you posted it is identical to mine... I think the ebay listing is misleading regarding the material.
Are you sure it isn't leather? I haven't tried the melt vs. scorch test on it yet so I'm not 100% sure. It feels like a really thin layer of leather over a harder backing...
Sent from my HTC Vision using Tapatalk
tophkw said:
URL DELETED
just like this !
Click to expand...
Click to collapse
Okay, that's it. I'm going to report every single one of your posts to have them deleted. All you are doing it trolling with your links to the FolioGuard.
100% certain its not leather. Got a reply from the the seller saying it is pv leather (I understand this to be a man made material and will never have been anywhere near a cow) which is fine but they should state this al the way through the listing. I have asked them to amend the listing and requested a part refund. If not I will report them to eBay and see what think
I am sure most people would be happy with the case and i agree with your review it does a reasonable job of proteting the Asus. The stitching is good but there is a small defect on the front of my case which
i like this case, might have to get one
well I am happy with the case seeing as i have just received a full refund. I do not need to return it either. So feels like a bargain now! Just shows you it is worth complaining. I hope they amend the listing to make it clear this is not leather for other people.
andyzarins said:
well I am happy with the case seeing as i have just received a full refund. I do not need to return it either. So feels like a bargain now! Just shows you it is worth complaining. I hope they amend the listing to make it clear this is not leather for other people.
Click to expand...
Click to collapse
Nice! It does say "Leather PU" now.
andyzarins said:
well I am happy with the case seeing as i have just received a full refund. I do not need to return it either. So feels like a bargain now! Just shows you it is worth complaining. I hope they amend the listing to make it clear this is not leather for other people.
Click to expand...
Click to collapse
You sir...are awesome! LOL. I should request a partial refund too! And I got 2x of them. Can't beat free!
verkion
My case arrived this weekend, but I guess I don't need to do a review either.
It's definitely a decent case for an alright price. Build seems good and does the job perfectly.
No complaints really.
Anybody know if this is the same case? http://electroniccrap.com/store/index.php?main_page=product_info&cPath=34_36&products_id=51
Okay this is my first review so bare with me on this one. I purchased the HTC case specifically designed for the Rezound. Overall makes the Rezound a bit beefier feeling, but still forms the Rezound curvature. I would guess it expands the width about 1/8" and same with bottom. But none added to the height, this is where the case starts failing. The case was very easy to install by just simply snap it on. Fits very snug and hugs the contours of the phone around the headphone jack and buttons. It is composed plastic and a synthetic fiber material. The plastic case on the exterior has a smooth rubbery texture around the perimeter of the device. Inside on the rear of the cover is a stitched applied "grip" from said fiber. I'm not good with material but seems to be like some form of a polyester. Overall, a fair case until we start talking about protection. Included is pictures with brief description. Now for the bad, it is definitely not an Otterbox. With the case attached, all four corners are unprotected and susceptible to damage. The case itself stops short right at the top and bottom giving you minor protection on these two sides. The other two sides (left and right) are covered, but still have issues. The case does not come up even or higher than the elevation of the screen. The screen/bezel sticks up just a tad, but still not good. If the phone were to be dropped perfectly parallel with the ground screen side down, this phone wouldn't have a fighting chance with this case on. If no screen protector was applied, just sliding it around face down could cause unnecessary scratches. Now back to the back part of the case. The stitched "grip" has a couple flaws in itself. I barely took my fingernail over this material, and I could see the material ripping apart. Think about his sliding in and out of your pocket. Also, the stitched part is held down with some epoxy that doesn't seem to hold very well. Around the camera cover, the material was coming up just rubbing my finger over it. Not even trying to dig into it, just merely rubbing my finger over it. Overall this phone fails in a great portion of protection, and construction. The good is it still maintains the original feel of the Rezound.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the full rear shot the back. Just shows kinda the make up and construction of the case.
Just a quick picture of the HTC logo on the back of the case in closer detail.
Rear showing of the case around the speaker.
The camera area where I found the "grip" to seem loose from attachment.
This is the bottom side of the device, as show the whole bottom is exposed to potential damage.
A shot of the device and case from side. Kind of hard to tell, but the screen bezel sticks up higher than the actual case.
And this is a shot of the corner, and the exposure it has.
Pictures taken by my trusty Droid Incredible.
Great in depth review! Keep an eye out; ill be doing a tpu case review of cruzerlite cases soon!
Sent from my ADR6425LVW using XDA App
Nice review. May I suggest a few paragraph breaks? Incredibly hard to read lol. I'll be getting a TPU case in a few days.
Sent from my Rezound using Tapatalk
Yeah I just got mine just now. Man I really don't like it LOL....it fits the device really well tho. May be time to get the otterbox. Thanks for the review
Edit. If anyone would like this case. You can make a $10 payment via PayPal and ill ship it to you for free..it just not for me. Such a pain shipping back to Amazon so I figured I'd offer it to one of you first. I paid 10 bucks Plus shipping. PM of you would like it, if I get no response by the end of the day I will send it back to Amazon then. Thanks guys
Picture of proof
Sent from my ADR6425LVW using Tapatalk
reverepats said:
Yeah I just got mine just now. Man I really don't like it LOL....it fits the device really well tho. May be time to get the otterbox. Thanks for the review
Edit. If anyone would like this case. You can make a $10 payment via PayPal and ill ship it to you for free..it just not for me. Such a pain shipping back to Amazon so I figured I'd offer it to one of you first. I paid 10 bucks Plus shipping. PM of you would like it, if I get no response by the end of the day I will send it back to Amazon then. Thanks guys
Picture of proof
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
GLWS... I thought about offering it up for sale on my review. I realized that would be an ass move. I shipped mine back to amazon yesterday.
NegativeOne13 said:
GLWS... I thought about offering it up for sale on my review. I realized that would be an ass move. I shipped mine back to amazon yesterday.
Click to expand...
Click to collapse
LOL im gonna do the same thing tomorrow..I just dont like the plastic inside. I wish i read your review much more thouroly cause thats just scratches waiting to happen. Especially when u take the case off, it can DEF scratch the Bezel. Im so friggen anal HAHA...ahh whata ya gonna do. and Now the Otterbox Commuter series is out of stock....figures much!!!
reverepats said:
LOL im gonna do the same thing tomorrow..I just dont like the plastic inside. I wish i read your review much more thouroly cause thats just scratches waiting to happen. Especially when u take the case off, it can DEF scratch the Bezel. Im so friggen anal HAHA...ahh whata ya gonna do. and Now the Otterbox Commuter series is out of stock....figures much!!!
Click to expand...
Click to collapse
Yeah I had that issue with a plastic case on my Incredible. I have scratches and gouges around the bezel on it. I also ended up melting that plastic case on my Incredible as well.... and rear cover.... and LEDs......
NegativeOne13 said:
Yeah I had that issue with a plastic case on my Incredible. I have scratches and gouges around the bezel on it. I also ended up melting that plastic case on my Incredible as well.... and rear cover.... and LEDs......
Click to expand...
Click to collapse
yeah thats why im returning it. I saw that happen to my Original EVO...not pretty. But no where on the web that carrys that case show the inside of the case. Not that most to LOL, But.......ahh well
http://www.amazon.com/BLUREX-Leathe...s=electronics&ie=UTF8&qid=1326461088&sr=1-407
I would buy it right now as it looks compatible with the keyboard dock but I will not pull the trigger until I know how the flap stays closed.
Edit - Wait it looks like to clips over the top...hmm I think I might get one.
This is the same case also sold by MoKo and Vertek. Targus also sold a version of this for the iPad2 (or the Moko and Vertek are a copy of the Targus). Anyway, the MoKo review thread has a couple pics of it with the keyboard dock in use.
http://forum.xda-developers.com/showpost.php?p=21369579&postcount=38
It looks like the only downside is the front of the keyboard is raised slightly due to the clasp.
clankfu said:
http://www.amazon.com/BLUREX-Leathe...s=electronics&ie=UTF8&qid=1326461088&sr=1-407
Click to expand...
Click to collapse
I ordered this myself. I like the viewing angles and how slim it is.
I wonder if this is any different than the Poetic, Verteks or Moko cases. They're all the same right?
All same, but i was reading in another thread that the Moko had cutout for charger.... and poetic didn't idk....minor differences....
rockstatus90 said:
All same, but i was reading in another thread that the Moko had cutout for charger.... and poetic didn't idk....minor differences....
Click to expand...
Click to collapse
I have the Poetic and it does have a cutout for the charger.
I got this case today since I wanted one before I head out on my road trip to vegas but its kinda disappointing so far. It feels a bit flimsy since its loose (kinda need to grab the case to know what I mean -_-; sorry that I can't really describe it) and the bottom corner of the tablet holder doesn't quite fit into the tablet. I'm kinda wondering if I should bother getting another case or just keep with this.
I'll return mine also if I don't like it. I have the Moko and have been just OK with it. Has the charging port cut out ok.
This was a fail. I ordered this from the Amazon link in the OP and I received today a case for a 7" tablet.
The sticker on the box said Transformer prime TF201, but it was way too small.
I got one. I don't have a tablet to use it in but it seems good so far. It says it is leather and smells and feels like leather. The construction of mine seems quite good. I'll post a pic or two Friday if one of the Primes I have coming doesn't have any issues.
I'm going to order and try it out. Fulfilled through Amazon, so returns will be easy.
I spent a good 10 minutes comparing the photos between this and the Moko, and they look identical.
Sent from my SPH-D710 using Tapatalk
I got mine today and do not like it. The tablet is held in by clasps, which I don't like at all. I switched back to my Moko case, which the tablet slides into. I'll return the Bluerex one.
I ordered this and it already shipped, too late to cancel ..Will I regret the purchase? What's the problem with it, it clips too tight?
I just received this case today. This is my first folio type case. My previous case was the official ASUS case for the TF101. Because of that, I have developed a preference for holding my tablet in portrait-view by folding the cover into a triangle shape behind the tablet (like the Apple Smart Cover).
The TF201 fits very tightly into this case. I'm afraid of bending the boarder of the prime every time I snap the case closed. It feels like high quality. I only wish that I could hold it in portrait-view like the TF101 case.
Well I finally got a good Prime. This case definitely seems to be constructed well. The stitching is tight and the materials feel nice. There are a couple things I dislike. One is that the tablet slides in really tight. Once you get it in it is fine but it feels a little unnerving trying to slide the case on. All the little tabs that hold it in place are soft material though so no scratching will occur.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The stand features works awesome. The tablet feels secure and does not feel at all like it will slip out of the grooves.
Here you can see when the cover is folded all the way back it does not lay flat. I believe this will loosen up over time as the materials stretch and get warn. This doesn't bother me but it may bother some. There is no mechanism to hold the cover back either. You just have to hold it with the tablet in your hands.
Here you can see I am pressing it down so it lays flat.
Another thing I dislike is how you have to snap the bottom two clips in for the tablet to be fully in the case but then you have to unsnap them if you want to use the stand feature. I would prefer if those two bottom clips on the left and right were not there. You can see in this pic below I have them snapped in but in the second pic above they are not snapped in so that the stand can be in use. I may get out my Dremel and grind those two tabs away. I think I could make it look decent and function the way I want. It depends if they loosen up for me. (When I say "snap" they don't really snap with a sound or definite feel but for lack of a better word I used "snap". They kind of just need to get pressed onto the right position.)
Here are a couple images of the case with the dock attached. These are basically the two ways you would probably use it. The dock lays flat and works perfectly in either position. The front is elevated slightly on the clip but you cannot really tell.
Finally, the clip that folds over the top of the tablet is a little tight. I am still kind of nervous to clip it over my tablet without really thinking about being super careful. Again everything is covered in a microfiber/felt type material so no scratching but the force you kind of need to use is a little unnerving. I also think this will loosen up over time but right now nothing really feels natural to use. I don't just whip the case open and start using it...I exam how I open it pretty carefully still, lol.
Would I buy it again? Probably not. Everything is just a little too snug for my liking and I dislike how you have to un-attach those bottom two tabs for placing it in the "stand" position. If they didn't come out so hard I probably wouldn't mind. I am really hoping everything loosens up a bit with use. The quality of the materials is impressive and it will protect the Prime just fine. Time will tell whether or not I use it I guess.
I loosened up the bottom two tabs with a pair of pliers. Slips in and out pretty easily now.
clankfu said:
I loosened up the bottom two tabs with a pair of pliers. Slips in and out pretty easily now.
Click to expand...
Click to collapse
This worked great. I loosened up the clip that holds it shut as well.
Thanks guys just ordered one myself. I've been eying the blurex case for my acer a100 which currently been out of stock for a while and love how low profile it was. Glad they also make one for the Prime. Also glad it will still work if I decide to get the keyboard.
Tabs or not, I don't like the way the tablet fits in this case. Having to clamp on and off all the time just isn't what I want to do. It will eventually scratch or wear down the metal/plastic and make it look bad. Thanks there are other options and still coming.
Ordered from China - I was thinking about importing more for other devices and selling them on if they were good enough, as there's an absence of silicone cases on the market here.
So, it comes in a rather nice plastic sleeve with Sikai all over it, and a very inspirational slogan: "Design originates from life. Specialization achieves quality." All good so far! I'm more impressed than I expected to be. Except with the slogan. It's not inspirational.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I open up the sleeve. Immediately notice a really acrid rubber smell, even a few feet from the case. It's horrendous. It smells like there's been a friction fire in a condom factory. I've smelled more pleasant things coming out of my cat. You might expect this to be just the new rubber smell, but a rinse off doesn't get rid of it. No, this smell is here to stay. This certainly isn't the food grade material you get on some others. You'd be lucky to live if you ate anything off this.
Not that these things are designed for having lunch off, of course - but there's a trend today away from caustic rubber smells, BPA and parabens, and this doesn't try to follow. I wouldn't want any of the small things in my house chewing on this.
The smell is more bearable after a while. It's probably destroying my nose hairs. Okay, front view.
It looks okay. So some parts of it do take a big nod toward quality. The feel of the case is nice - the textured cover certainly won't be slipping out of your hands, and it's reasonably thick. The logo imprinted inside the case is a nice touch, too - that little extra bit, even though it's basically just a bit of blown rubber, adds to the overall impression of it.
The holes for peripherals, sensors and the cameras are nice, too - there's no spare silicone hanging off the holes, and overall it's really well made.
The back is just as nice. That textured feel is present all the way around. The Sikai logo is nicely imprinted - the detail is good. Overall, having a good feeling about it.
Okay, let's slide in the TF300T...
It goes in easily. Probably slightly too easily - after literally no struggle at all, the pad is in the case. And here's where the problems start.
Although the case fits snugly around the back, with all the holes matching up to the ports and sensors, around the front it's a different story. The front camera holes and sensors don't fit snugly - they're a few mm from the case holes, so that renders the front camera useless. You end up just seeing the ill-fitting case. All around the front of the case, the poor fit is the same:
But the holes fit nicely around the rest of the case: there isn't a mismatched hole, everything fits in and the volume buttons are taken care of nicely. They work very well.
However, leaving it on for a while, the deficiencies become apparent. That smell is back every time you get close to the tablet. Naturally, you may as well forget about using your front camera, too: it fits so poorly that it's entirely obscured by the case unless you hold it down to the glass. And the case starts to pick up the smallest of dust particles - not only that, but they stick to the case like... well, like the bad smell that the case also came with. They're a nightmare to get rid of. You're not cleaning this one in a hurry. And when you do clean it, it's going to get filthy again really quickly.
Alright, this is the black one - and we all know that black things show the dirt more. But the textured cover, while very impressive and grippy, just serves to attract dirt that gets stuck in the textures.
Not a great case - those fundamental flaws are the smell, the way dirt gets lodged in there and the extremely poor fit. "Specialization achieves quality"? It clearly doesn't. I think this is going in the bin - unless I find out a way to shrink it onto the pad, and then spray it with Febreeze every day.
Check this post out. I bought a silicone case off EBay that fits perfectly. Also, no acrid smell either. I have also listed my other purchases for my tablet in this post. The only thing missing is the dock. I just got it the other day from Office Depot. The manager even matched the price Walmart had online. I paid $119 for the dock.
http://androidforums.com/showthread.php?p=5315630
Sent from my Transformer Pad TF300T using Xparent Purple Tapatalk 2
wetbiker7 said:
Check this post out. I bought a silicone case off EBay that fits perfectly. Also, no acrid smell either. I have also listed my other purchases for my tablet in this post. The only thing missing is the dock. I just got it the other day from Office Depot. The manager even matched the price Walmart had online. I paid $119 for the dock.
http://androidforums.com/showthread.php?p=5315630
Sent from my Transformer Pad TF300T using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
Interesting. I was looking at a folding case instead. Something that's very similar to the first one - does the tablet fit pretty snugly?
Either that or a revolving one. They're just bulky, though. Kinda defeats the point of a thin and light tablet.
dontsurf said:
Interesting. I was looking at a folding case instead. Something that's very similar to the first one - does the tablet fit pretty snugly?
Either that or a revolving one. They're just bulky, though. Kinda defeats the point of a thin and light tablet.
Click to expand...
Click to collapse
Oh yes, It fits the tab perfectly and I'm actually very impressed with it. Now that I've gone and bought a dock, I won't be using it as much as I would like.
I just bought a Poetic leather case for the dock and keyboard. According to the details and the reviews, it's all real leather and not the PU leather a lot of the cases are made of. I'll have it the first or second week of January and post a review for it.
Here's a link for it.
http://www.amazon.com/gp/product/B007ZE26CO/ref=oh_details_o00_s00_i00
Silikon Case TF300t
I guys
i bought this silikon case for the tf300 t
http://www.amazon.de/Skque-Silikon-...FLII/ref=sr_1_1?ie=UTF8&qid=1357057904&sr=8-1
Have also the same problem as User in post 1