Which one do you have?
pham818 said:
Which one do you have?
Click to expand...
Click to collapse
http://www.amazon.ca/Inskin-Tempere...&qid=1385393675&sr=8-1&keywords=inskin+note+3
Love it. I used to think the tempered glass protector's where all hype, definately not the case anymore.
2.5D Tempered Glass. $7 on eBay.
HAZA12D_HYPERDRIVE_NOTE3
ILoome tempered here + Otterbox Defender (with the built in screen protector removed)
would using a tempered glass screen protector work with the Otterbox Defender case? I don't wanna go out and get the screen protector and it not work with the otterbox
Jake1Jamie said:
would using a tempered glass screen protector work with the Otterbox Defender case? I don't wanna go out and get the screen protector and it not work with the otterbox
Click to expand...
Click to collapse
I've done with defenders on 4 different phones, not on the G3, but just try to find a screen protector that only covers the screen and not the bezels to make it easier.
Jake1Jamie said:
would using a tempered glass screen protector work with the Otterbox Defender case? I don't wanna go out and get the screen protector and it not work with the otterbox
Click to expand...
Click to collapse
Maybe not the answer you're looking for, but I'm using an iCarez 0.2mm tempered glass screen protector (9H hardness) with a Cruizerlite BugDroid TPU case without issue. Screen protector and care do not interfere with one another despite the screen protector extending to the edges of the glass.
Rodeojones said:
Maybe not the answer you're looking for, but I'm using an iCarez 0.2mm tempered glass screen protector (9H hardness) with a Cruizerlite BugDroid TPU case without issue. Screen protector and care do not interfere with one another despite the screen protector extending to the edges of the glass.
Click to expand...
Click to collapse
I'm guessing you'd recommend a 0.2mm over the 0.3mm
Even with just a 0.2mm iCarez in place sometimes I get missed touches, particularly while playing Ingress and towards the top of the screen. The 0.4mm glass Verizon sells has been reported to cause real bad touchscreen issues. I think the 0.3 ones are fine, but since 0.2mm is available and just as protective, why not go for the thinner one ?
Sent from my VS985 4G using Tapatalk
I want to buy screen protectors (for both front and back panel). Which is better plastic or tempered glass? What experiences have you got with them? And what manufacturers do you recommend? I want a screen protector that hasn't got large cuts around the camera, just a circle for the camera and another for the flash, and on the front also just a circle for the camera and another for the sensors.
I have the this Glass-M tempered protector. Both friend and back. Haven't had any issues with it for the last one year. The main advantage is that this is slim enough to work with the magnetic dock.
unni_kmr said:
I have the this Glass-M tempered protector. Both friend and back. Haven't had any issues with it for the last one year. The main advantage is that this is slim enough to work with the magnetic dock.
Click to expand...
Click to collapse
Yeah, it looks good but it's really expensive for a screen protector. You bought it at this price?
maddboss said:
Yeah, it looks good but it's really expensive for a screen protector. You bought it at this price?
Click to expand...
Click to collapse
It was $27 at that time.
maddboss said:
I want to buy screen protectors (for both front and back panel). Which is better plastic or tempered glass? What experiences have you got with them? And what manufacturers do you recommend? I want a screen protector that hasn't got large cuts around the camera, just a circle for the camera and another for the flash, and on the front also just a circle for the camera and another for the sensors.
Click to expand...
Click to collapse
Tempered Glass is better for protection than film screen protectors.
Checkout Pthink
http://www.amazon.com/PThink-Protector-Anti-scratch-Fingerprint-resistant/dp/B00J9ZGNJO
or Nillkin 9H tempered glass.
yavhin said:
Tempered Glass is better for protection than film screen protectors.
Checkout Pthink
http://www.amazon.com/PThink-Protector-Anti-scratch-Fingerprint-resistant/dp/B00J9ZGNJO
or Nillkin 9H tempered glass.
Click to expand...
Click to collapse
It's just for the front and not for the back. I want screen protectors for both front and back.
http://www.evolutivelabs.com/collec...rotector-for-sony-xperia-z2?variant=695855065
If u are using a case, i recommed you the Nillkin 9H tempered glass. Come with the regular plastic for protecting the back and the camera lens. Why? If u are a case user, i dont think tempered glass back will fit ur case.
Honestly, they're all the same, I burnt through the lot of them, Nilkin, Pthink, Hero. They're all the same, I see no difference in quality and durability. I think the Pthink was most resistant to fingerprints, but not by much
yuskhayru said:
If u are using a case, i recommed you the Nillkin 9H tempered glass. Come with the regular plastic for protecting the back and the camera lens. Why? If u are a case user, i dont think tempered glass back will fit ur case.
Click to expand...
Click to collapse
I don't use a case so, I don't like them
I prefer pthink and it does fit the tpu case that I use at work.
Sent from my D6503 using XDA Free mobile app
I prefer matte/anti-glare screen protectors. Main reason, on glass and glossy plastic surfaces, after using for a while (15-20 minutes), my fingers start to "stick" to the glass. Not really stick, per se, but they don't glide as easily and I have to switch to a different finger. With a matte protector, I never have this issue. Also, they help cut down on reflections. There are draw backs of course. It makes the screen hard to see outdoors (but I rarely use my phone outdoors) and it does reduce brightness a little (but I don't really go over 30% or so when indoors anyway). And they do introduce a touch of graininess.
The best ones I have found are iLLumiShield and Anker. Though the Anker is the best I have used, it is not available on the Z2. I have tried many other matte films, but they all introduce too much graininess. And some affect touch response.
Here is the illumishield for the Z2. http://www.amazon.com/gp/product/B00IK46CTG/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
This is the anker (not for the Z2 though) http://www.amazon.com/Protector-Hig...836544&sr=1-1&keywords=anker+matte+anti-glare
Mocolo
Personally i use Mocolo Screen Protectors, it's really amazing, premium quality, very clear, rounded edges, very smooth, anti scratch
i used it with my previous Z Ultra and now with my Z2 and i'm very pleased with this screen protector
http://www.aliexpress.com/item/Moco...-Side-0-33mm-2-5D-Round-Edge/32224768996.html
I'm trying to find a tempered glass protector for the front and back of my Z2, but for the life of me i can't find one...
Nillkin Anti-Explosion Tempered Glass Protector
neo6776 said:
I'm trying to find a tempered glass protector for the front and back of my Z2, but for the life of me i can't find one...
Click to expand...
Click to collapse
here try this Nillkin Anti-Explosion Tempered Glass Protector, i ordered it and will be arriving in few days
http://www.ebay.com/itm/201344224623
Hey guys i saw a screen protector that says anti shock? What exactly is this? Its like matte? Thicker than a normal screen protector?
Στάλθηκε από το D6503 μου χρησιμοποιώντας Tapatalk
There is difference between cheap and more expensive tempered glass screen protectors?
Today received
http://m.ebay.com/itm/311383432608?_mwBanner=1
I am not satisfied... Front have stretch and no cutout for camera... And back can't fit, it's longer than phone panel... So lost money.
Sent from my D6503 using Tapatalk
ı have a cheaper one
İt's good for me to protect my z2
mixxx5 said:
Today received
http://m.ebay.com/itm/311383432608?_mwBanner=1
I am not satisfied... Front have stretch and no cutout for camera... And back can't fit, it's longer than phone panel... So lost money.
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
i bought the same tempered glass, no problem at all.
The camera has it's own cut and the back fits as it should..ask for a refund or a resend..
I have the Tudia ultra slim lite case on my LG G3 and really like it a lot. However, it doesn't work very well with my current Pleson tempered glass screen protector because the Tudia's edge's extend over the Pleson's edges, and it can catch on the glass and lift it up. I'm already going to need to replace the Pleson because dirt has gotten under one of its edges.
So, is anyone using a Tudia with a tempered glass screen protector that fits? If so, which one are you using?
Anyone has any suggestions for screen guard or tempered glass, which one is best?
Been using spigen tempered glass, and i have to say so far, so good.
Crystal clear view and responsive touch screen
no advertising intended lol
SilentScorn said:
Been using spigen tempered glass, and i have to say so far, so good.
Crystal clear view and responsive touch screen
no advertising intended lol
Click to expand...
Click to collapse
Thanks
I'm a fan of the IQShield soft protector. Feels great and offers excellent protection. Won't crack.