Hi all
I managed to find a proper CWM recovery for my device Karbon A8 which has no glitches, flashes and works properly.
So I wanted to add custom icon to it. On flashing the downloaded recovery it works correctly whereas on changing the images it doesn't work and is stuck at boot screen
So I unpacked it and then went to ramdsik-contents->res->images and replaced the icon_clockwork.png with desired file and repacked it using kitchen without receiving any errors.
After that I flashed it and rebooted the phone. Phone after showing Karbonn (splash screen) screen goes into a black screen and is stuck there :crying:
I didn't do anything else, didn't change any values just the .png's and flashed.
After that I tried many unpacking and repacking tools but no success. Same problem unpacks and repacks without erros but after flashing stuck at black screen
Can anyone please have a look at this and help.
Please help really need help.
Thanks in advance.!
I use Windows 7 (x64) on my laptop. If someone can try unpacking and adding these images and repacking in ubuntu that might solve the problem. Please anyone help Thanks
Links to images I want to add : icon_clockwork.png
stitch.png
Working Recovery.img (untouched) : Recovery.img
Recovery after repacking : New-Image.img
so you are not stuck, just flash the working recovery, pretty dramatic post imo and wrong forum.
Related
I rooted my phone and forgot about the recovery image. I was installing apps on my phone when i came across font installer so i said why not try that too...Was not a good idea after all because it rebooted my phone and it stays on the boot image with the t-mobile logo . I don't know what to do i have tried lots of different things still with no success. please help
Hi I have an Allwinner A10 clone (Kurio 7), it is designed for kids but otherwise a standard android tablet.
After hours of googling I rooted and installed CWM & Gapps (not included in the stock ROM). So far so good.
The stock ROM was causing issues with some apps, it needed to go.
I flashed CM10 and it worked but no touch screen. It needed a compatibility flash to make it work. You can guess what's coming. I picked the wrong one and now the device does the following:
Reboot loop
Black screen (backlight though)
PWR+Vol up no longer gets to recovery
Vibrates constantly between reboots (due to wrong patch I'm guessing)
ADB picks up the device for a split second between reboots but "adb reboot recovery" does nothing. Even when using wait command.
Tried "fastboot flash recovery cwm.img" after wait command, no luck.
Is there anything else I can try?
I fixed this.
I used the GoClever TAB A73 ROM and instructions in their support/update/download area.
Sorry I cannot post links as I am still a newbie.
Anyway flashing using Livesuit this fixed the problem.
Turzyx said:
I fixed this.
I used the GoClever TAB A73 ROM and instructions in their support/update/download area.
Sorry I cannot post links as I am still a newbie.
Anyway flashing using Livesuit this fixed the problem.
Click to expand...
Click to collapse
Hi, can you please share with me how you manage to unbrick your Kurio 7. I had just bricked mine trying to install CM10.
Thanks.
lamkc said:
Hi, can you please share with me how you manage to unbrick your Kurio 7. I had just bricked mine trying to install CM10.
Thanks.
Click to expand...
Click to collapse
I guess this is the site he is refering to:
http://www.goclever.com/uk/support,c3/software-update,a28.html?aic=5&aia=185&ail=10
The LiveSuit pack is there for download, as well as the roms.
But there are three different 4.0 roms to choose from, and also a couple of 2.3 roms. I dont know which one he did use.
Since your Kurio 7 is bricked anyway, I guess you can try one by one and see if any of them work.
Please tell which one, if you succeed.
Hey guys, i have a G3T running the official jiayu.es ROM
Today the phone is stuck on loop, it shows the jiayu.es logo, then goes black, then shows the logo again then goes black etc
Ive downloaded countless versions of SP flash tool and many many scatter files, each of which are giving me errors.
Can anyone please point me in the direction of the best version of SP flash tool to use, the correct scatter files and the best recovery image
I would really appreciate
Thanks guys
I had recently found out how to root my Galaxy S3 specificly the Sprint model since then I was messing with Xposed, and a few specific Modules having to do with the UI I encountered a UI crash when I rebooted the first time, then after that I attempted to wipe the device thinking that would fix the issue only to have it not boot into the device instead stick at the boot screen (I cant share links yet or Id show an image) I have flashed the Clockwork Mod Recovery tool into the device which worked I have access to Odin and CWM I just don't know how to fix this issue and it only looks like I make things worse if I try to look it up myself does anyone know what I should do???
Edit
I managed t get the device running by finding the original firmware update zip on the samsung website then ran it throught adb the situation resolved itself thanks though.
Hello, I have rooted my phone (SH-02E) yesterday, It seems look like everything is okay. I rebooted my phone today, it stops at loading the logo "docomo" and cannot go into the system :crying:.
Do anyone can solve this problem? Or do anyone have the custom Rom for SH-02E or the recovery.img, boot.img system.img for SH02E? Thank you very much!