The path from stock to custom on the i777:
gather onto internal memory, or micro-sd:
-Framaroot
-Mobile Odin APK
-Mobile Odin flash kernel for i777
-i777_firmware.zip
-Boot.img (extracted from i777-firmware.zip)
install and use framaroot
^^ uses an exploit to establish and manage root access
install mobile Odin and the mobile Odin flash-kernel
^^ the method that will NOT trip the custom-flash monitor
flash the boot.img via Mobile Odin
^^ flashes the kernel and recovery of the i777_firmware.zip, to ensure installation compatibility
^^ once flashed, you will no longer be able to boot into the stock android installation
boot to recovery
install i777_firmware.zip
enjoy
-Cyril
tonyjs007 said:
hai bro i got a i777 unlocked to use in india,my android version is 2.3.6 ginger bird i need to install a kitkat custom rom but it need cwm when i try to install cwm via my custom recovery it shows signature verification failed and i couldnt find any kernal to update via odin.plzzz help me
Click to expand...
Click to collapse
thanks 4 helping bro ,now updated to official jellybean from here http://www.sammobile.com/firmwares/3/?download=15433,so still the above methods i can use to flash custom recovery right?
That is correct. Whether gingerbread or jellybean, the same procedure applies to go from stock to custom (without tripping the flash counter).
tonyjs007 said:
thanks 4 helping bro ,now updated to official jellybean from here http://www.sammobile.com/firmwares/3/?download=15433,so still the above methods i can use to flash custom recovery right?
Click to expand...
Click to collapse
Thanks again..i flashed kitkat rom successfully with ur help
Related
Hi,
I've got 2 questions :
-Can i update my Samsung Rom to CM9 with :
1-boot on recovery mode
2-Load "CWM.zip", i've download on XDA
3-Load CM9.ROM.ZIP
4-Reboot
-Can i change the kernel on Samsung ROM ?
bbk said:
Hi,
I've got 2 questions :
-Can i update my Samsung Rom to CM9 with :
1-boot on recovery mode
2-Load "CWM.zip", i've download on XDA
3-Load CM9.ROM.ZIP
4-Reboot
-Can i change the kernel on Samsung ROM ?
Click to expand...
Click to collapse
in order to install CM9 rom u have to first root ur Phone using a CF-root Kernel
since Cm9 cannot be flashed with Stock recovery as it needs Custom recovery
so first root ur phone and then install CM9
My phone is already root. (with any PC )
CWM.zip is a ClockWorkMod in a ZIP to load in memory a CWM-recovery 5.X
What is a CF-Root kernel ?
bbk said:
My phone is already root. (with any PC )
CWM.zip is a ClockWorkMod in a ZIP to load in memory a CWM-recovery 5.X
What is a CF-Root kernel ?
Click to expand...
Click to collapse
CF- chain Fire-Root kernel will root ur phone and install custom recovery on ur Phone
so if ur phone is already rooted then install the CWM.zip file, then reboot into cwm recovery and install the CM9 zip file
before that in cwm recovery make a nandroid bkp of ur exsisting rom first
and also follow the instructions of flashing CM9 rom carefully form there thread OP
Thanks, i will try in 2 days
help needed
Hi
I have ICS 4.0.3 (GT-i9100BULP7 | LP8 | IML74K.BULPD), can someone tell me how to root it.
i rooted it before the update with "CF-Root-SGS2_BU_VOD_LPC-v5.4-CWM5".
After the update my mobile is unrooted
my i9100 also has the BrickBug Chip issue
bkhaliq said:
Hi
I have ICS 4.0.3 (GT-i9100BULP7 | LP8 | IML74K.BULPD), can someone tell me how to root it.
i rooted it before the update with "CF-Root-SGS2_BU_VOD_LPC-v5.4-CWM5".
After the update my mobile is unrooted
Click to expand...
Click to collapse
You root it using the same method as before, I assume via ODIN, but with an LP7 CF-Root kernel.
bkhaliq said:
Hi
I have ICS 4.0.3 (GT-i9100BULP7 | LP8 | IML74K.BULPD), can someone tell me how to root it.
i rooted it before the update with "CF-Root-SGS2_BU_VOD_LPC-v5.4-CWM5".
After the update my mobile is unrooted
Click to expand...
Click to collapse
Try flashing a PDA which has a CF-root available ( via PC-ODIN).
Then flash the CF root to gain root and CWM.
CWStJNobbs said:
You root it using the same method as before, I assume via ODIN, but with an LP7 CF-Root kernel.
Click to expand...
Click to collapse
Thanks for the effort
please tell me from where can i get the
LP7 CF-Root kernel
help needed
Hi
I have ICS 4.0.3 (GT-i9100BULP7 | LP8 | IML74K.BULPD), can someone tell me how to root it.
i rooted it before the update with "CF-Root-SGS2_BU_VOD_LPC-v5.4-CWM5".
After the update my mobile is unrooted
my i9100 also has the BrickBug Chip issue
Hi everyone. I have rooted my phone with Exynosabuse and flashed CWM Recovery with ROM manager premium, then I unrooted my phone and uninstalled rom manager, but still stuck with CWM Recovery. My question is how to return to stock recovery? ( thanks in advance for any help ) also can I update my s3 via KIES while having this CWM recovery? ( notice that my phone now is unrooted )
flash stock ROM using odin
one more question
XeactorZ said:
flash stock ROM using odin
Click to expand...
Click to collapse
Thanks
But one more request, can u get me a link for leaked official 4.1.2 jelly bean rom for s3? I will be very thankful if u fetched my one.
Btw my baseband (I9300XXDLID ) if u need it.
u take recovery.img from stock rom..flash it using mobile odin...
Mostafa Wael said:
Hi everyone. I have rooted my phone with Exynosabuse and flashed CWM Recovery with ROM manager premium, then I unrooted my phone and uninstalled rom manager, but still stuck with CWM Recovery. My question is how to return to stock recovery? ( thanks in advance for any help ) also can I update my s3 via KIES while having this CWM recovery? ( notice that my phone now is unrooted )
Click to expand...
Click to collapse
Read the returning to a warranty state post .
Basics as posted multiple times are .
Run Triangle Away .
Flash stock rom
Factory reset .
jje
Wrong section, post in QA
Mostafa Wael said:
Thanks
But one more request, can u get me a link for leaked official 4.1.2 jelly bean rom for s3? I will be very thankful if u fetched my one.
Btw my baseband (I9300XXDLID ) if u need it.
Click to expand...
Click to collapse
leaked official 4.1.2 ????
just go sammobile website search and download for your country if you want
else flash any country version also okay
Just use kies, it's safer and easier...
About how much percent ODIN can fail in flashing rom to s3? Still didnt receive updates on KIES so i want to flash it via ODIN. Also how many time ddoes it take for ODIN to complete flashing??
Get the galaxy s3 toolkit. It includes odin and a copy of the stock recovery you can flash.
Flashing the recover with odin takes under a minute. Flashing a complete rom with odin takes about 5 minutes maximum.
Sent from my GT-I9300 using xda app-developers app
Mostafa Wael said:
About how much percent ODIN can fail in flashing rom to s3? Still didnt receive updates on KIES so i want to flash it via ODIN. Also how many time ddoes it take for ODIN to complete flashing??
Click to expand...
Click to collapse
0% fail if you follow the instruction
just need samsung kies (you need the usb driver, not kies because install samsung kies will automatically install the driver also)
and odin and the ROM (in .tar or .tarmd5, depends, confirm is end with .tar and put in pda
and take less than 10 minutes
flashed my s3 via mobile ODIN pro and it worked like a charm.....
Finally flashed my phone, but with mobile ODIN pro. My question is how to get the 4.2 camera on jelly bean 4.1.2 XXELKC. ? Thanx for all your help guys. ..
Flash a custom rom with the mod .
See Android Development Omega rom for one .
Or find the files and push them yourself to the custom rom .
Have a look in Themes and apps and see if its also posted as a standalone mod .
jje
Mostafa Wael said:
Hi everyone. I have rooted my phone with Exynosabuse and flashed CWM Recovery with ROM manager premium, then I unrooted my phone and uninstalled rom manager, but still stuck with CWM Recovery. My question is how to return to stock recovery? ( thanks in advance for any help ) also can I update my s3 via KIES while having this CWM recovery? ( notice that my phone now is unrooted )
Click to expand...
Click to collapse
personnaly i do it with mobile odin a choose the firm i want and remove all letting just recovery
ultimarom flashing. .
Noob question:
it's said that ultimarom can be flashed using clockworkmod recovery 6.0.1.2 or 6.0.1.9. I have 6.0.2.7. Can I Flash ultimarom using this version ? Thanks for all xda-developers members helping me
Mostafa Wael said:
Noob question:
it's said that ultimarom can be flashed using clockworkmod recovery 6.0.1.2 or 6.0.1.9. I have 6.0.2.7. Can I Flash ultimarom using this version ? Thanks for all xda-developers members helping me
Click to expand...
Click to collapse
It depends upon the instructions for that rom you need to read them .
But CWM recovery flash is the norm for most custom roms .
jje
Stock Recovery
If you just want the Stock Recovery for example for OTA, just flash the stockrecovery.tar via ODIN. Even I don't like using ODIN too much, but it's a million times better than Kies and easy to use. I personally recommend using ODIN on the PC if possible and avoid Mobile Odin. Mobile Odin is only if you don't have a PC or really need to do something on the go. It's a great app but don't use it all the time. And I'm not sure about this but I think by just flashing the Recovery you won't loose root nor Data, so you save a lot of time!
Only crappy thing with Odin is that it needs TAR and I don't know how to make those excpet with Toolbox. Does anybody know an easy way to make a flashable tar on windows without toolbox or cygwin (linux).
[
Only crappy thing with Odin is that it needs TAR and I don't know how to make those excpet with Toolbox. Does anybody know an easy way to make a flashable tar on windows without toolbox or cygwin (linux).[/QUOTE]
Probable found in the development and hacking section of xda developers forum .
jje
mega bass beat option
I've read about the "flashing mega bass beat option to s3" and it says
-- install zip from sdcard
-- chose zip from sdcard
-- wait for installation to complete
-- wipe cache partition
-- wipe dalvik cache
-- wipe fix permissions
The question is: what will happen if I didn't wipe the dalvik cache?
Do I really need to wipe it?
Glebun said:
Wrong section, post in QA
Click to expand...
Click to collapse
Then what is this? Is it some another forum?
Would just like to confirm before i proceed as i do not want to brick my phone.
Since I'm running i9300 stock android 4.1.2, is it safe to root using the method found here?
Since recovery won't be installed, i am unable to find an odin flashable cwm 6.0.4.x which is required for kitkat roms.
There is twrp 2.6.3.0 here, but i'm unfamiliar with it and the version needed to flash kitkat roms.
Any help would be appreciated as search/stickies did not help.
jbonetwo said:
Would just like to confirm before i proceed as i do not want to brick my phone.
Since I'm running stock android 4.1.2, is it safe to root using the method found here?
Since recovery won't be installed, i am unable to find an odin flashable cwm 6.0.4.x which is required for kitkat roms.
There is twrp 2.6.3.0 here, but i'm unfamiliar with it and the version needed to flash kitkat roms.
Any help would be appreciated as search/stickies did not help.
Click to expand...
Click to collapse
for rooting see stickies guide http://forum.xda-developers.com/showthread.php?t=1911726
but yes that rooting method is save
for the recovery try philz touch http://forum.xda-developers.com/showthread.php?t=2002953 which is based on cwm and is able to flash kitkat roms: there is a odin flashable tar.md5
Darkened_Sky said:
for rooting see stickies guide http://forum.xda-developers.com/showthread.php?t=1911726
but yes that rooting method is save
for the recovery try philz touch http://forum.xda-developers.com/showthread.php?t=2002953 which is based on cwm and is able to flash kitkat roms: there is a odin flashable tar.md5
Click to expand...
Click to collapse
thank you for the reply
tbh i prefer twrp but will use cwm if twrp does not support kitkat flashing.
have tried philz but did not like it...would use it only if cwm and twrp aren't available.
jbonetwo said:
thank you for the reply
tbh i prefer twrp but will use cwm if twrp does not support kitkat flashing.
have tried philz but did not like it...would use it only if cwm and twrp aren't available.
Click to expand...
Click to collapse
Seen some roms/mods tat can only be flashed with cwm.
jbonetwo said:
thank you for the reply
tbh i prefer twrp but will use cwm if twrp does not support kitkat flashing.
have tried philz but did not like it...would use it only if cwm and twrp aren't available.
Click to expand...
Click to collapse
search in the twrp thread with the keyword "cm11" and you'll find the answer:
in short you do not need the version in the op but from the main website and in the thread is a link to it. but better look yourself
if you are unsure ask in the thread, which roms are flashable through twrp and which one causes problems
jbonetwo said:
Would just like to confirm before i proceed as i do not want to brick my phone.
Since I'm running i9300 stock android 4.1.2, is it safe to root using the method found here?
Since recovery won't be installed, i am unable to find an odin flashable cwm 6.0.4.x which is required for kitkat roms.
There is twrp 2.6.3.0 here, but i'm unfamiliar with it and the version needed to flash kitkat roms.
Any help would be appreciated as search/stickies did not help.
Click to expand...
Click to collapse
here u go
http://forum.xda-developers.com/showthread.php?t=2200501
For anyone interested:
Yes you can use cf auto root in the op link to root jb 4.1.2
For Recovery:
CWM: You have to flash via odin cwm 6.0.3.2 then install the 6.0.4.4 zip via recovery
TWRP: odin flashable twrp 2.6.3.1(required for kitkat) is available on the twrp website.
Philz: odin flashable zip can be found in this thread. Not sure about kitkat compatibility tho.
SRSroot
jbonetwo said:
Would just like to confirm before i proceed as i do not want to brick my phone.
Since I'm running i9300 stock android 4.1.2, is it safe to root using the method found here?
Since recovery won't be installed, i am unable to find an odin flashable cwm 6.0.4.x which is required for kitkat roms.
There is twrp 2.6.3.0 here, but i'm unfamiliar with it and the version needed to flash kitkat roms.
Any help would be appreciated as search/stickies did not help.
Click to expand...
Click to collapse
i use SRSroot to root my devices, this app success to root my chinnese devices... you can find in google. i just recommend you to use that's app.
Courtesy: @ monalac
Install ROM With ODIN
Flash Custom recovery CWm / TWRP
Boot into Custom Recovery
Flash emotion kernel r22 zip with custom Recovery
Link available here Post #337
http://forum.xda-developers.com/not...m-htcspain-t3111963/post63230428#post63230428
Flash Supersu latest version throough CWM.
Rooted working fine on 5.1.1
dineshh said:
Courtesy: @ monalac
Install ROM With ODIN
Flash Custom recovery CWm / TWRP
Boot into Custom Recovery
Flash emotion kernel r22 zip with custom Recovery
Link available here Post #337
http://forum.xda-developers.com/not...m-htcspain-t3111963/post63230428#post63230428
Flash Supersu latest version throough CWM.
Rooted working fine on 5.1.1
Click to expand...
Click to collapse
Mate, no luck, r22 is not working on my sm-n915g with aussie 5.1.1 rom, I got the seandroid error.
organ said:
Mate, no luck, r22 is not working on my sm-n915g with aussie 5.1.1 rom, I got the seandroid error.
Click to expand...
Click to collapse
It will always say seandroid is not enforcing at the top but will work... It's just alerting you to the fact that the kernel has been changed...
This is how I got root on mine and it works but say bye bye to your KNOX....
dineshh said:
Courtesy: @ monalac
Install ROM With ODIN
Flash Custom recovery CWm / TWRP
Boot into Custom Recovery
Flash emotion kernel r22 zip with custom Recovery
Link available here Post #337
http://forum.xda-developers.com/not...m-htcspain-t3111963/post63230428#post63230428
Flash Supersu latest version throough CWM.
Rooted working fine on 5.1.1
Click to expand...
Click to collapse
flashing Emotion-TW-5.1.1 and it has pre installed su?
before i try to root http://forum.xda-developers.com/note-edge/general/easy-steps-stock-odin-n915tuvu1anjl-sm-t2943993 from here. everything was perfect but i stuck in bootloop. many tries but failed.
No more need using Custom Kernel! Chainfire has developed new method!
Take a look here: http://forum.xda-developers.com/note-edge/general/easy-root-edge-phones-stock-kernel-to-t3266156
Petteri said:
No more need using Custom Kernel! Chainfire has developed new method!
Take a look here: http://forum.xda-developers.com/note-edge/general/easy-root-edge-phones-stock-kernel-to-t3266156
Click to expand...
Click to collapse
i root using micky kernel and now mobile lag sometime . so i try Chainfire. after flashing supersu.zip its stuck on bootloop what happed here help plz
I have tried numerous ROMS, but the only one, that worked was a prerooted original Samsung 4.1.2 ROM, that was fully loaded by Odin.
All other ROMS are stuck in the boot process.
I have done:
Install root - CWM or similar
Wiped
Install ROM
Any suggestions for a Kit-Kat ROM, that is debloated and working?
Torben67 said:
I have tried numerous ROMS, but the only one, that worked was a prerooted original Samsung 4.1.2 ROM, that was fully loaded by Odin.
All other ROMS are stuck in the boot process.
I have done:
Install root - CWM or similar
Wiped
Install ROM
Any suggestions for a Kit-Kat ROM, that is debloated and working?
Click to expand...
Click to collapse
Go to this link and download stock 4.4 and flash it with odin. Then reflash twrp and then try the custom roms. I think that you still have JB bootloader. Need to upgrade to KK to get the bootloader.
https://www.sammobile.com/firmwares/galaxy-tab3/SM-T211/
Sent from my XT1609 using Tapatalk
Which firmware from your link or is it not an issue?
Anyway I tried one version, but CWM could not install it??
RealWelder said:
Go to this link and download stock 4.4 and flash it with odin. Then reflash twrp and then try the custom roms. I think that you still have JB bootloader. Need to upgrade to KK to get the bootloader.
https://www.sammobile.com/firmwares/galaxy-tab3/SM-T211/
Sent from my XT1609 using Tapatalk
Click to expand...
Click to collapse
Torben67 said:
Which firmware from your link or is it not an issue?
Anyway I tried two versions, but CWM could not install it??
Click to expand...
Click to collapse
It reports not being able to "Update", so I guess it is an update - not an complete installation??
Torben67 said:
It reports not being able to "Update", so I guess it is an update - not an complete installation??
Click to expand...
Click to collapse
Doesn't matter I don't think. You have to flash that firmware with Odin and the device in download mode. Once it's finished you'll have stock 4.4 and the KK bootloader. Then reflash cwm with Odin, then use cwm to install the custom ROMs.
Sent from my XT1609 using Tapatalk