Courtesy: @ monalac
Install ROM With ODIN
Flash Custom recovery CWm / TWRP
Boot into Custom Recovery
Flash emotion kernel r22 zip with custom Recovery
Link available here Post #337
http://forum.xda-developers.com/not...m-htcspain-t3111963/post63230428#post63230428
Flash Supersu latest version throough CWM.
Rooted working fine on 5.1.1
dineshh said:
Courtesy: @ monalac
Install ROM With ODIN
Flash Custom recovery CWm / TWRP
Boot into Custom Recovery
Flash emotion kernel r22 zip with custom Recovery
Link available here Post #337
http://forum.xda-developers.com/not...m-htcspain-t3111963/post63230428#post63230428
Flash Supersu latest version throough CWM.
Rooted working fine on 5.1.1
Click to expand...
Click to collapse
Mate, no luck, r22 is not working on my sm-n915g with aussie 5.1.1 rom, I got the seandroid error.
organ said:
Mate, no luck, r22 is not working on my sm-n915g with aussie 5.1.1 rom, I got the seandroid error.
Click to expand...
Click to collapse
It will always say seandroid is not enforcing at the top but will work... It's just alerting you to the fact that the kernel has been changed...
This is how I got root on mine and it works but say bye bye to your KNOX....
dineshh said:
Courtesy: @ monalac
Install ROM With ODIN
Flash Custom recovery CWm / TWRP
Boot into Custom Recovery
Flash emotion kernel r22 zip with custom Recovery
Link available here Post #337
http://forum.xda-developers.com/not...m-htcspain-t3111963/post63230428#post63230428
Flash Supersu latest version throough CWM.
Rooted working fine on 5.1.1
Click to expand...
Click to collapse
flashing Emotion-TW-5.1.1 and it has pre installed su?
before i try to root http://forum.xda-developers.com/note-edge/general/easy-steps-stock-odin-n915tuvu1anjl-sm-t2943993 from here. everything was perfect but i stuck in bootloop. many tries but failed.
No more need using Custom Kernel! Chainfire has developed new method!
Take a look here: http://forum.xda-developers.com/note-edge/general/easy-root-edge-phones-stock-kernel-to-t3266156
Petteri said:
No more need using Custom Kernel! Chainfire has developed new method!
Take a look here: http://forum.xda-developers.com/note-edge/general/easy-root-edge-phones-stock-kernel-to-t3266156
Click to expand...
Click to collapse
i root using micky kernel and now mobile lag sometime . so i try Chainfire. after flashing supersu.zip its stuck on bootloop what happed here help plz
Related
how to install a rom without a cwm bootloop?
Make sure you're on latest twrp or cwm or don't flash aokp rom's. That should generally be it
Sent from my sgs2 running cm9
Makrilli said:
Make sure you're on latest twrp or cwm or don't flash aokp rom's. That should generally be it
Sent from my sgs2 running cm9
Click to expand...
Click to collapse
but if i flash the latest twrp with cwm touch(not last version) than i also not get a bootloop?
leime68 said:
but if i flash the latest twrp with cwm touch(not last version) than i also not get a bootloop?
Click to expand...
Click to collapse
Theres a repacked cwm touch in drv section that also has the fix.
sent from my i9250
The best is to flash recovery with fastboot to avoid the risk.
And I have aokp and no bootloop....
Hi friend
googled but, looks something different to ..
Im getting installation aborted status 7 during installation of kitkat
ROMs like cm-11-20140101-INFECTED-i9100 and super nexus
The same above rom has been flashed before worked well and no problem, now not able flash
tried using recovery.. original CWM apolo kernal(CWM), Philz kernal(CWM) and even TWRP
and deleted asserts in rom update scrip file still error status 7
But the thing is i can flash NeatROM lite using above Recovery
Im little scared i think it has been bricked?
Please help regarding above error
thippesh said:
Hi friend
googled but, looks something different to ..
Im getting installation aborted status 7 during installation of kitkat
ROMs like cm-11-20140101-INFECTED-i9100 and super nexus
The same above rom has been flashed before worked well and no problem, now not able flash
tried using recovery.. original CWM apolo kernal(CWM), Philz kernal(CWM) and even TWRP
and deleted asserts in rom update scrip file still error status 7
But the thing is i can flash NeatROM lite using above Recovery
Im little scared i think it has been bricked?
Please help regarding above error
Click to expand...
Click to collapse
its not bricked, if it was bricked you can't even start the phone so no worries.
first make sure your phone is a gt9100, if it is try to flash something else (just for a test), or download a other rom, like slimsaber. Please give a report back :highfive:
You flash the CWM 6.0.4.5 (KK Compatible)?
Just use a up to to date CWM version. First, flash gustavo's Kitkat kernel, then flash a kitkat rom. For example, you cannot install a KK rom with 6.0.3.7 recovery. You need at least CWM 6.0.4.5 or TWRP 2.6.1, to be able to flash a KK rom. So, its not bricked or something.
Dampierre said:
Just use a up to to date CWM version. First, flash gustavo's Kitkat kernel, then flash a kitkat rom. For example, you cannot install a KK rom with 6.0.3.7 recovery. You need at least CWM 6.0.4.5 or TWRP 2.6.1, to be able to flash a KK rom. So, its not bricked or something.
Click to expand...
Click to collapse
Exatcly. I raccomanded flash a KK ROM from CM 10.2 / ROM based-on-10.2
COMMON PROBLEM !
1. if your in TWRP install blazing kernal to get the lower version of cwm
2. if your getting error on cwm flash an older version CM 10.2
3. that's it fixed
4. or if your in cm 10.2 and still getting error in the sense corrupted download
hope it helps :good:
Dampierre said:
Just use a up to to date CWM version. First, flash gustavo's Kitkat kernel, then flash a kitkat rom. For example, you cannot install a KK rom with 6.0.3.7 recovery. You need at least CWM 6.0.4.5 or TWRP 2.6.1, to be able to flash a KK rom. So, its not bricked or something.
Click to expand...
Click to collapse
Thank you all everyone to your kind replies and helping me out this problem,
has been solved by first flashing the gustavo's Kitkat kernel or kitkat Compatible Kernal
after that i can flash the KK rom
thanks thank you guys
-Marco said:
Exatcly. I raccomanded flash a KK ROM from CM 10.2 / ROM based-on-10.2
Click to expand...
Click to collapse
Does this mean I have to install ROM from CM 10.2?
This means I have to clean all my data n cache 1st. Thn install CM 10.2?
Thn clear data n cache again?
Thn install the Kit Kat ROM n GApps?
Yep
The path from stock to custom on the i777:
gather onto internal memory, or micro-sd:
-Framaroot
-Mobile Odin APK
-Mobile Odin flash kernel for i777
-i777_firmware.zip
-Boot.img (extracted from i777-firmware.zip)
install and use framaroot
^^ uses an exploit to establish and manage root access
install mobile Odin and the mobile Odin flash-kernel
^^ the method that will NOT trip the custom-flash monitor
flash the boot.img via Mobile Odin
^^ flashes the kernel and recovery of the i777_firmware.zip, to ensure installation compatibility
^^ once flashed, you will no longer be able to boot into the stock android installation
boot to recovery
install i777_firmware.zip
enjoy
-Cyril
tonyjs007 said:
hai bro i got a i777 unlocked to use in india,my android version is 2.3.6 ginger bird i need to install a kitkat custom rom but it need cwm when i try to install cwm via my custom recovery it shows signature verification failed and i couldnt find any kernal to update via odin.plzzz help me
Click to expand...
Click to collapse
thanks 4 helping bro ,now updated to official jellybean from here http://www.sammobile.com/firmwares/3/?download=15433,so still the above methods i can use to flash custom recovery right?
That is correct. Whether gingerbread or jellybean, the same procedure applies to go from stock to custom (without tripping the flash counter).
tonyjs007 said:
thanks 4 helping bro ,now updated to official jellybean from here http://www.sammobile.com/firmwares/3/?download=15433,so still the above methods i can use to flash custom recovery right?
Click to expand...
Click to collapse
Thanks again..i flashed kitkat rom successfully with ur help
Hi,
I have rooted my alpha with cf-auto-root, installed TWRP recovery and disabled knox.
Now, any rom I'm trying to install from a zip file bricks my phone (and I can restore from a backup or can flash the stock rom with odin)
Why can't I install a zip?
Thanks!
paskuniak said:
Hi,
I have rooted my alpha with cf-auto-root, installed TWRP recovery and disabled knox.
Now, any rom I'm trying to install from a zip file bricks my phone (and I can restore from a backup or can flash the stock rom with odin)
Why can't I install a zip?
Thanks!
Click to expand...
Click to collapse
What version of twrp you have and for what version of the alpha is the rom that you are flashing?
Sent from my SM-G850F
tileeq said:
What version of twrp you have and for what version of the alpha is the rom that you are flashing?
Sent from my SM-G850F
Click to expand...
Click to collapse
I have twrp 2.8.1.1 and I've tried installing both OzcanRom:
http://forum.xda-developers.com/gal...anrom-aroma-lollipop-v1-0-16-05-2015-t3109816
and S6 Sensation Rom:
http://forum.xda-developers.com/galaxy-alpha/development/rom-sm-g850f-galaxy-s6-ozcan-aroma-t3110885
Both are lollipop. Both soft-bricked my phone.
paskuniak said:
I have twrp 2.8.1.1 and I've tried installing both OzcanRom:
http://forum.xda-developers.com/gal...anrom-aroma-lollipop-v1-0-16-05-2015-t3109816
and S6 Sensation Rom:
http://forum.xda-developers.com/galaxy-alpha/development/rom-sm-g850f-galaxy-s6-ozcan-aroma-t3110885
Both are lollipop. Both soft-bricked my phone.
Click to expand...
Click to collapse
Get v.2.8.7.0 from twrp and try it.
http://forum.xda-developers.com/showthread.php?t=2931017
Sent from my SM-G850F
A. androidfilehost is down. Anywhere else I can get it?
B. Why isn't it available from the TWRP manager app?
C. Noob question: Why does it even matter what recovery I'm using?
Hey guys currently I'm using Cyanogenmod 13 official! Few days back I flashed this ROM with TWRP 3.0.0.1 Recovery! The ROM is quite good but the main problem with this ROM is I can't root it! Whenever I flash the SuperSU zip from the recovery it flashes successfully but when my mobile boots up, my mobile stucks into the boot logo! And it keeps booting forever! How can I get rid of this problem!
Sorry for my Bad English! I hope you guys understood my problem!
Thanks in advance
Shamaji said:
Hey guys currently I'm using Cyanogenmod 13 official! Few days back I flashed this ROM with TWRP 3.0.0.1 Recovery! The ROM is quite good but the main problem with this ROM is I can't root it! Whenever I flash the SuperSU zip from the recovery it flashes successfully but when my mobile boots up, my mobile stucks into the boot logo! And it keeps booting forever! How can I get rid of this problem!
Sorry for my Bad English! I hope you guys understood my problem!
Thanks in advance
Click to expand...
Click to collapse
Which version of SuperSU did you flash?
Try flashing v2.71 beta.
Are you using custom kernel?
nasif69 said:
Which version of SuperSU did you flash?
Try flashing v2.71 beta.
Are you using custom kernel?
Click to expand...
Click to collapse
Nope I'm not using any custom kernel! I flashed SuperSU 2.46 zip!
Shamaji said:
Nope I'm not using any custom kernel! I flashed SuperSU 2.46 zip!
Click to expand...
Click to collapse
Use the rom's inbuild root from developer options.
Or flash SuperSU v2.71 beta
Shamaji said:
Nope I'm not using any custom kernel! I flashed SuperSU 2.46 zip!
Click to expand...
Click to collapse
2.46 is pre Marshmallow, so bootloop is not only expected but certain.
Try using something that is actually for the version of your ROM.