[Q] Unfortunately the setup wizard has stopped. Help me? - Android Q&A, Help & Troubleshooting

Hi Friends,
Please please read & solve my problem.
I have Qmobile A35 with android 4.2.2 jelly bean installed. Yesterday, I downloaded a CWM recovery from somewhere and used Farmaroot to root my mobile and used MTK mobile uncle to install CWM. MTKMU showed that it is installed successfully but when I tried to reboot into recovery both my stock recovery and CWM recovery gone. When I try to go into recovery, logo of qmobile is shown but, instead to go in recovery like in past, logo remains there for sometime then screen goes to black then logo appears again but this time mobile normally reboot.
2nd problem is big than 1st one.
After that mistake, I did another one. I was not unable to restore factor settings through builtin option as mobile restarted and no changes. So, I used 3rd party app named SRSRoot for Android to wipe all data through my PC.
Now when mobile restarts, it shows error message that "Unfortunately the setup wizard has stopped." and I am not able to pass it.
Any suggestion? Any one can help? I have heard that on this forum every one gets the solution? Can I get it too?

Related

[Q] Can't Reboot into recovery, Q-mobile Noir A10

Hello Everyone,
I have Noir A10 by Qmobile and since morning I am having this problem. I had installed JMP ROM v 8 and it was working super fast for atleast a month or so. When I got up in the morning, I saw the wait logo(that appears when I boot up the phone). I waited for a few minutes but phone was stuck there. I tried to restart but it didnt respond. I took out the battery and turned it back on. It did turn on but display resolution had a problem. I could not see whole the screen. For instance when I browse to Application drawer, I am unable to see some of the Icons. I reset the phone to factory settings and restarted but had the same problem with display. Then I tried to reboot into recovery but it simply resets the phone to factory settings instead.
I have tried a couple of applications (ROM Manager, MobileUncle MTK Tools) too but the phone is reset to factory settings each time.
Thanks
I would have posted into relavant Noir A10 thread, but since I am a beginner it does not let me post there.
please you can send me the solution
i also finding this problem solution
i also finding this problem solution plzz give the solution :crying:

[Q] Vega A870L System Restart Because of Application Error

My Vega Iron suddenly restart and encountered this error "System Restart because of Application Error". The first time, it restarted just fine but on the second one it always stucked at L+ Logo. I already tried factory reset on the stock recovery but it didn't solved it. I also tried the Vega Self Upgrade but always have an error on USB Driver on 3 PCs I used. I can't find any help on the net on how to properly run it. Then I tried to flash a latest firmware but with sms fix using CWM Recovery but still encounter same error. I actually found a vietnamese forum with the error but I can't understand even if I translate it.
Can anyone please help me? Current firmware is S1235210.

[Q] [Bootloop][GT-I9100G][Rooted/Unrooted]

Hi All
I've got a Samsung Galaxy S2 (GT-I9100G) for over 2 years UNROOTED , yesterday, I rooted it and all went successfully and smoothly in a way I didn't believe that I done it :angel: , but unfortunately I tried to change my System theme , boot animation and installed one of themes offered by "ROM Toolbox Lite" app , then it prompts me to reboot in order for the changes to take place, I done.
The Problem, when it reboots it didn't change any of the boot animation, and when I swipe the screen in (Swipe the screen to unlock) window It freezes and reboots again and again.
One of the solutions I've tried is to Unroot my mobile phone and all went successfully but the problem remains the same! Couldn't enter my home screen to remove the theme , moreover, I tried to wipe system/factory data, to return to main factory settings and nothing changes! , to make matters worse , I wiped the cache partition , when I reboot the phone I got an error message saying :
"App (COMANDROIDUI) stopped unexpectedly . Please try again later", I tabbed on "Force close" then the status bar vanishes and phone freezes for 4 seconds and reboots again :crying: , btw, it shows to me the screen of green android avatar which means that it successfully reset to default factory settings, I didn't flash any custom ROM or made any changes to kernel or firmware.
Now I couldn't open my phone any more :crying:
Any one help me pleaaase , U could assume am a noob
Thanks in advance
Solution From thread owner
Omar_Elboredy said:
Hi All
I've got a Samsung Galaxy S2 (GT-I9100G) for over 2 years UNROOTED , yesterday, I rooted it and all went successfully and smoothly in a way I didn't believe that I done it :angel: , but unfortunately I tried to change my System theme , boot animation and installed one of themes offered by "ROM Toolbox Lite" app , then it prompts me to reboot in order for the changes to take place, I done.
The Problem, when it reboots it didn't change any of the boot animation, and when I swipe the screen in (Swipe the screen to unlock) window It freezes and reboots again and again.
One of the solutions I've tried is to Unroot my mobile phone and all went successfully but the problem remains the same! Couldn't enter my home screen to remove the theme , moreover, I tried to wipe system/factory data, to return to main factory settings and nothing changes! , to make matters worse , I wiped the cache partition , when I reboot the phone I got an error message saying :
"App (COMANDROIDUI) stopped unexpectedly . Please try again later", I tabbed on "Force close" then the status bar vanishes and phone freezes for 4 seconds and reboots again :crying: , btw, it shows to me the screen of green android avatar which means that it successfully reset to default factory settings, I didn't flash any custom ROM or made any changes to kernel or firmware.
Now I couldn't open my phone any more :crying:
Any one help me pleaaase , U could assume am a noob
Thanks in advance
Click to expand...
Click to collapse
Finally, got a solution that suggested I download the original firmware and flash it.
I successfully done it and surprisingly, I got back my phone
If anyone got a problem like this feel free to ask about it

[Q] Help. Phone acting weird

Hello all,
Since couple of days my phone is acting really weird. Here are the specs:
Brand: Huawei U8800 ideos X5
Rom : Aurora 4.1, update 20
Recovery: cwm
I was installing an app from the market and suddenly the phone restarts and every app starts to crash (Unfortunately...... has stopped) with the downloading app stuck at the notification at 80 % forever without progressing. The weird thing is I can't uninstall any app. I can uninstall, but after booting every app uninstalled appears as if it's not Uninstalled at all.
So I decide to do a factory reset using CWM. Cwm says reset is successful, so I restart the phone and see nothing has changed. It's as if no reset has been done and the crashing continues.
So I decide to go for Stock rom (Gingerbread). After following the official installation steps the phone says the installation is successfull and restarts automatically. When the phone boots up all I see is old Aurora Rom and the same old crash of apps(all apps crashes a_z).
This is so weird. I have never seen this before and have been googling since 2 days without any solution.
I request xda devs to help me on this.
Regards
wizardR said:
Hello all,
Since couple of days my phone is acting really weird. Here are the specs:
Brand: Huawei U8800 ideos X5
Rom : Aurora 4.1, update 20
Recovery: cwm
I was installing an app from the market and suddenly the phone restarts and every app starts to crash (Unfortunately...... has stopped) with the downloading app stuck at the notification at 80 % forever without progressing. The weird thing is I can't uninstall any app. I can uninstall, but after booting every app uninstalled appears as if it's not Uninstalled at all.
So I decide to do a factory reset using CWM. Cwm says reset is successful, so I restart the phone and see nothing has changed. It's as if no reset has been done and the crashing continues.
So I decide to go for Stock rom (Gingerbread). After following the official installation steps the phone says the installation is successfull and restarts automatically. When the phone boots up all I see is old Aurora Rom and the same old crash of apps(all apps crashes a_z).
This is so weird. I have never seen this before and have been googling since 2 days without any solution.
I request xda devs to help me on this.
Regards
Click to expand...
Click to collapse
When you're flashing back to stock have you tried to wipe every partition including your internal SD?
Also how soon does the crashing begin after you flash your ROM?, because if the crashing begins as soon you boot up, you may have a hardware issue and of course the only way to solve that would be to send your phone into warrenty if you can.
Hi tidaboy9
I can't actually flash any roms. If I do, it says the flash is successful, but after the restart nothing will change. Whatever I do in the phone, it will restore everything after reboot, apps, history , etc .
By wiping partition, do u mean flashing stock partition. That I did.
All I want to do is do a hard reset, wipe everything and start new, but I am unable to due to above mentioned reasons. And yes, the crash begins soon after the reboot.
Please tell me this not hardware related as it is not under warranty.
Thanks

Device stucks after "Touchwiz-Start Has Stopped" and Root

Hi,
yesterday our Samsung SM-T815 Tablet has shown the message: "Touchwiz-Start Has Stopped" - we weren't able to do something because the Homescreen wasn't able to load.
Because of this I was looking for a possible fix (@Google), so I found the way to root the device.
As found, I did the root, but after Root the devices stucks in the second boot screen (First: powered by Android, Second: SAMSUNG).
So I flashed the Device with the result that the device now stucks in the first boot screen...
Full Wipe / Factory Reset also doesn't function.
Meanwhile I really don't know what I can do to fix the problem. I hope someone of you can help me to fix this problem

Categories

Resources