Hello Everyone,
I have Noir A10 by Qmobile and since morning I am having this problem. I had installed JMP ROM v 8 and it was working super fast for atleast a month or so. When I got up in the morning, I saw the wait logo(that appears when I boot up the phone). I waited for a few minutes but phone was stuck there. I tried to restart but it didnt respond. I took out the battery and turned it back on. It did turn on but display resolution had a problem. I could not see whole the screen. For instance when I browse to Application drawer, I am unable to see some of the Icons. I reset the phone to factory settings and restarted but had the same problem with display. Then I tried to reboot into recovery but it simply resets the phone to factory settings instead.
I have tried a couple of applications (ROM Manager, MobileUncle MTK Tools) too but the phone is reset to factory settings each time.
Thanks
I would have posted into relavant Noir A10 thread, but since I am a beginner it does not let me post there.
please you can send me the solution
i also finding this problem solution
i also finding this problem solution plzz give the solution :crying:
Related
Hi guys! My phone has stopped working. When I turn it on, phone starts booting system and restarts, trying to boot again and restart... again and again and again... Sometimes when I've some luck it turns on, works while, sometimes more (last time few hours). But finally restart again and back to restarting and being unable to run system I've formated my phone, installed stock rom, wiped everything, got clear phone... but it didn't help. I've no idea what's going on. I hope you guys have some ideas! I've new account here and i can't paste link here how it's look like.
Hi Friends,
Please please read & solve my problem.
I have Qmobile A35 with android 4.2.2 jelly bean installed. Yesterday, I downloaded a CWM recovery from somewhere and used Farmaroot to root my mobile and used MTK mobile uncle to install CWM. MTKMU showed that it is installed successfully but when I tried to reboot into recovery both my stock recovery and CWM recovery gone. When I try to go into recovery, logo of qmobile is shown but, instead to go in recovery like in past, logo remains there for sometime then screen goes to black then logo appears again but this time mobile normally reboot.
2nd problem is big than 1st one.
After that mistake, I did another one. I was not unable to restore factor settings through builtin option as mobile restarted and no changes. So, I used 3rd party app named SRSRoot for Android to wipe all data through my PC.
Now when mobile restarts, it shows error message that "Unfortunately the setup wizard has stopped." and I am not able to pass it.
Any suggestion? Any one can help? I have heard that on this forum every one gets the solution? Can I get it too?
I do not exactly know how a phone looks like when its 'Bricked' but I believe there is something very wrong with my Xolo Q800.
Just a week back, a couple of applications stopped working. I restarted and since then its been restarting if I open any application. The OS has freezed itself into the state it was at 2pm on Tuesday 9th December. All I can do is receive calls and sometimes even dial them. Once I restart it says one by one all the Google background processes stop working. At times while receiving calls, the dailer UI goes away, and then it restarts and freezes to Boot Animation, so I have to remove the battery and then start again.
I tried wiping it completely from TWRP recovery that is already installed. Didnt work. Tried formatting by going into the settings inside the OS - MIUI, that is installed. It will restart but would come back to same state as it was at 2pm Tuesday 9th.
I tried using the following links, followed the exact process to unbrick and install the real OS, still it would come back to the same state as it was on 2pm Tuesday 9th.
Not to mention I did use 'Run as Administrator' while using SP Tools.
Link 1 : http://www.blog-android.com/uncatego...ick-your-xolo/
Link 2 : http://xoloq800roms.blogspot.in/2013...446gionee.html
Link 3 : http://androidxda.com/flash-stock-ro...one-flash-tool
Link 4 : http://forum.xda-developers.com/show....php?t=2650125
Link 5 : https://docs.google.com/a/nid.edu/fi...Qk0/edit?pli=1
and a couple of more links, which I cant find now.
I'm really desperate now to make it work.
Really in need of help.
PS: I have tried multiple custom roms to flash, but nothing helped, nothing changed. I even tried installing CWM recovery http://xoloq800roms.blogspot.in/2013...k-rom-and.html
Nothing helped, nothing changed. Its still on that same state and would restart if I would try use applications.
Hi guys please help me i need to have my phone working back |:.... today i updated my wiko fever 4g but i got an error... now when i boot it an android icon shows with "no command." text. Tryed with v.39 program on wiko website but its not working for me... when arrow becomes green download wont start.
I'm thinking to recover system fom sd card but i cannot find roms please help me |: thanks in advance
Same issue here... Finally decided to upgrade the system from stock firmware, and got "error" when it rebooted the phone. Then "no command".
Darknezz89 said:
Hi guys please help me i need to have my phone working back |:.... today i updated my wiko fever 4g but i got an error... now when i boot it an android icon shows with "no command." text. Tryed with v.39 program on wiko website but its not working for me... when arrow becomes green download wont start.
I'm thinking to recover system fom sd card but i cannot find roms please help me |: thanks in advance
Click to expand...
Click to collapse
I solved my issue by restoring Lollipop (v.39) with the tool from the wiko website and then performing the update again; the phone started again (at v.41) and I was able to download Marshmallow from the next system update.
Issue was probably caused by some configuration or application.
Still slowly downloading Marshmallow now, so cannot say anything about the next update, but I guess that will go well, since the phone is reset now.
Just to follow up: Marshmallow is working fine on my Wiko Fever, much better than Lollipop. Amazing update.
Instructions for others after having read some comments from other people experiencing issues with the upgrade:
- BACKUP all your data before upgrading from Lollipop to Marshmallow, as if you would buy a new phone; I luckily did, as I wanted to set the microSD from removable to internal
- remove the microSD and (after having a backup of all your data as per step above) format the card as FAT32 on your PC; better to have a clean MicroSD card for after the upgrade I think
- reboot the phone in recovery mode and do a: wipe cache+reset to factory settings
- once the phone is reset and started, proceed with upgrading to Marshmallow
- don't know if needed after the upgrade to do an additional wipe cache+factory settings reset, doesn't harm to do it though
- be unhappy for the hours lost in restoring the phone data + apps + reconfigure everything
- be happy of the improved phone software
Questions upon questions.
So, i got the notification for the update last week, and i saved it until today to install it. The file downloaded was just 7 mb, i had enough battery for the intallation of the update (30% recomended by the software), something got messed up and an error message with the dead android character appeared. I know i lost all my things contacts and sd card... tried to hard reset the damn thing and nothing. I already googled the problem and i found nothing similar to what i get, i'm stuck in the recovery screen and the phone doenst shut down, every time i force it, it just boots back up after 15 30 seconds. I got to be honest i tought it was just another update but aparently its a "new" operating androind system. They could have told me with a update log or something...
hi tech gurus, am having problem with this device, the device details are:
name: leagoo m8 pro
Android version: 6.0
ram:2GB
ROM:16Gb
chip: Mt6737M
processor:armv7
SDK:23
HOW THE PROBLEM STARTED
on the night of the day I bought the phone I decided to root it because I wanted to change the font and of course use xposed modules, I successfully rooted the phone, changed font successfully with ifont, now the only left is to install xposed framework, so I read all the info at the xposed thread, to know more about my device I downloaded CPU z, and mobile uncle, which said my device arm version is just arm.
I down xposed flashable zip in the arm category, which is v87, and it's The latest their till now.
I flash the zip file, everything went successfully via twrp v3.1.1 then I clicked reboot, phone switched off came on and displayed the white leagoo text, it was stucked there for like 12mins I coudnt wait any longer, so I removed and inserted the battery booted into twrp and wiped the cache, data, system and davilk cache, nvram, and click reboot but twrp said no ROM installed.
Guys I have no other option thab to flash the stock ROM, which I did, am sure I did it the right way, I used
sp flash tool v5.1
leagoo freemos V3.06(downloaded from leagoo website)
after flashing it showed green good mark, I rebooted the phone, as soon as the setup screen appeared the phone rebooted again..... till it long enough to allow me finish the setup.
guys as am typing with the phone am still experiencing the rebooting problem.
sometimes it will just random reboot,
or music will crack and reboot especially when the screen is off.
I have tried every thing I could, such flashing custom recovery even flashing earlier official stock ROM of the phones all to no avail
pls tech gurus help me, I just bought this phone
the highest up time I ever got on this phone is just 9 hours
thanks