I'm attempting to put Ubuntu Touch on my Sony Xperia tablet Z, and have run into some issues.
I've managed to unlock it, and flash the ubuntu recovery partition, but the actual system either won't flash, or won't boot properly. It hangs at the SONY logo. ADB detects the device, and I can interface with it through the terminal (reboot it into the bootloader, or recovery). When booted into bootloader, Fastboot requires sudo access to do anything, but otherwise seems to be working.
I was using the instructions listed here; https://wiki.ubuntu.com/Touch/Devices/pollux (new user, system won't let me make it clicky)
I should also note that its the wifi version, no cellular network capability.
So to sum it up, where should I go next, and how do I get this working?
Related
"""I recently updated my TF300T to JellyBean 4.2.1. That worked fine. I then wanted to see if I could root this version. I tried 4-5 different custom recoveries, including multiple TWRP and CWM versions. Although they were able to boot to the custom recovery, they could never mount any of the data on the tablet, so I wasn't able to flash any custom roms or root my device. Anyway, I finally installed the latest CWM for the TF300 on JellyBean (6.0.3.1 or something). I still could not mound any tablet data from the recovery. Although installing any of this on a brand new 4.2.1 was incredibly stupid, it gets worse...
I thought that maybe if I did a "wipe data" on the device I would be able to mount it. I then got stuck in a situation in which the tablet would only boot to CWM recovery. I didn't even press the volume key- it would simply go directly to the recovery. This was useless, to say the least, as I could not flash anything or do anything from this.
I then found a way to actually boot into my transformer- I used my PC and typed "adb reboot-bootloader". This gave me the option to cold boot and get into the tablet like normal. However, any subsequent reboots or power-offs would require PC intervention and a cold boot in order to boot into the tablet. This wasn't convenient, although I admin it is much better than where I am now.
I tried multiple times to flash a new recovery, and the same CWM stays on the system. I cannot for the life of me get this stinkin CWM recovery off my device! I ended up trying to wipe my system again, and now I'm absolutely stuck. I can only boot into recovery if I don't do anything on the PC. I can get into fastboot by using a PC, but that's about it. I can't boot into the system after fastboot, and recovery has no rights to change any files.
I can run commands to write new recovery, system, etc using adb, and it sends the file, "writes" it unrealistically fast, and then just says OK as if it was complete. The screen on the tablet doesn't change at all during this, other than the fact that the blinking box for the Fastboot options becomes solid. I have let it sit there for 10-15 minutes and it simply does nothing. (The last attempt was "fastboot -i 0x0B05 flash system blob" where the blob file was the one from the most recent stock firmware download from ASUS.com.) I then have to manually reboot the tablet using the power button, and the whole cycle starts over again.""" I didn't feel like writing all this out so I'm plagiarizing; kill me if you like. I did exactly what he did and got things working the way he did.
Recently though I wiped my hard drive to start a clean windows 7 from scratch and I can't figure out how to get the drivers installed on my computer. As Asus hasn't published them from what I can find and I haven't gotten the android sdk manager to do anything past flashing cmd prompt for a millionth of a second. I basically just need help with the drivers, so any help would be very appreciated. I haven't found anything so far looking through the forums that has helped by the way. I haven't been able to find any threads with solutions yet...
I used the asus pc sync package for the tf300t from asus's website since the tf300tg did not want to download, in any case that with the new google sdk works for me.
Also I noticed issues using anything but twrp openrecovery-twrp-2.5.0.0-tf300t-4.2.blob when it comes to mounting and backups this is the only one that i tried that worked so far.
Hey guys,
I am sorry if I am in the wrong place or am asking something wrong. This is my first time using these forums (and forums in general). If I need to be somewhere else kindly redirect me.
Anyway, I was with Verizon for a while but after some shady stuff I decided to break up with them. Beforehand I had bought outright a Sony Xperia Z2 Tablet. Because I did not want anything Verizon on it I decided to root it, and flash a good ROM onto it (Cyanogenmod was my idea, but at the time I don't think they supported it? I'm not good with ROMS). Anyway, the rooting was completely successful and I had a custom recovery (TWRP) installed. I was ready to flash the ROM. Unfortunately, I wasn't paying attention and grabbed the wrong ROM. What ended up happening is when I attempted to reboot after "flashing", the device didn't show anything on the screen and just kept vibrating. After some digging around I found it might be "soft-bricked". I had at one time found a guide that told me how to undo this by using SDK Tools and Fastboot Mode (blue LED), but cannot find the guide anymore.
I was wondering if ANYONE could help me undo this mistake, and get the tablet back to it's original state or with a nice compatible ROM. I am currently in Fastboot mode and it is plugged into my ASUS Laptop running Windows 7. Any and all help would be GREATLY appreciated. Thank you so much for taking time to read this.
EDIT: So a breakdown is I cannot interact with the tablet directly. There is absolutely no interface. Just a screen that won't turn on. Meaning if there is a method it can't be done on the tablet. The old guide I found was explaining how to do it through Windows while the tablet was plugged into it via USB.
Also the bootloader was never unlocked so I think that was also an issue.
First of all, if your bootloader is locked, you cannot install CM because you cannot change the Kernel. You can only use Sony-certified Kernels which won't work with CM. So Sony-based ROMs are your only options
But what you can do is:
- Go into fastboot mode (turn off your tablet, connect it to your PC and press volume up. If the blue LED shows up, you are in fastboot)
- With fastboot, you should be able to flash a ROM (preferably Android 4.4, so you can root again)
- Then root, install dual recovery
- Flash the correct ZIP
Alternative:
- Unlock Bootloader
- Flash recovery
- Flash CM
BabelHuber said:
First of all, if your bootloader is locked, you cannot install CM because you cannot change the Kernel. You can only use Sony-certified Kernels which won't work with CM. So Sony-based ROMs are your only options
But what you can do is:
- Go into fastboot mode (turn off your tablet, connect it to your PC and press volume up. If the blue LED shows up, you are in fastboot)
- With fastboot, you should be able to flash a ROM (preferably Android 4.4, so you can root again)
- Then root, install dual recovery
- Flash the correct ZIP
Alternative:
- Unlock Bootloader
- Flash recovery
- Flash CM
Click to expand...
Click to collapse
Can you simplify this? Where do I find the ROM (again, this was a tablet from Verizon so I assume on top of the Sony ROM I need the Verizon version of it?) And I understand I cannot install CM unless the bootloader is unlocked; do you know how to do this?
I'm confused by the first set of instructions as I cannot use the tablet directly. How will I flash the ROM (and which is the right ROM and where can I find it?) through the computer since the tablet can't be interacted with. There is absolutely no interface to interact with whatsoever. Which ROM do I download for the Verizon Sony Xperia Z2 Tablet and how do I flash it using Fastboot? I assume I do it thru my computer?
Sorry, but you'll have to Google a little bit - I haven't had your exact problem.
But as long as you can get into fastboot mode, nothing is lost.
There also is the Sony ftf tool or so, the Windows program name is Emma. This should be easier than using fastboot.
Also there is a sony site for bootloader unlocking. You can check whether your bootloader can be unlocked at all.
Hey Everybody!
I am new to this forum, looking for a way to root my trekstor Surftab breeze 9.6 Quad. I already tried out the recommended tools, unfortunately none of them worked out. Is anyone of you aware of a method rooting the tab? Or did anyone already rooted it?
First ofall I am looking for a way to move files and apps to the external sd and delete pre-installed apps. Farther, if possible and available, a custom rom would be pretty amazing.
I'm only familiar to nexus root toolkit on my old nexus 4, otherwise I'm a newbie in rooting.
Maybe there's some of you able to help me. If necessary, I will look up more information on the tablet.
Lucas
Maybe as an Update:
Trying to build a working adb connection using the andorid sdk tools, the surftab is not listed as a device in "adb devices"
Anyone out there who can help me with the tablet?
Alright, new update for today.
I was able to get a driver running and the root-toolkits like KingoRoot, KingRoot, One Click root etc. noticed the device, I even was able to start the rooting, but all of those tools said "Root failed" or "Your device is soild to root".
Looks like those one click solution aren't able to root the surftab. I also tried towelroot and framaroot, both without any success.
I am still looking for help
If you are still interested, I successfully dumped whole eMMC memory from this tablet, so I can send you, for example, the boot partition. You can try patch it with Magisk
The magic
Yes, if it's not difficult for you, you can share the firmware. I will be grateful
Hi!
I attached xz-compressed stock boot.img for you!
Also, I have full eMMC dump, but:
recovery partition data are not usable (overwritten by uncompatible recovery image during mine tests)
no data partition
no platform bootloader partitions mmc0boot0 and mmc0boot1
Trekstor-Surftab-Breeze-9.6-ST96416-1-emmc-dump.dd.xz [1.12 GB]
Decompress and use kpartx tool (need force to ignore omitted data partition)
I have this tablet rooted now, so you can ask me for anything about it.
With love for all open source,
petabeda
Just one thing: fastboot boot is not supported here, so If you are afraid, flash modified boot.img to recovery partition with fastboot flash recovery boot.img for test (adb reboot and then adb reboot recovery
You will lost your recovery, but, at least, no bricked device in case of error (recovery is actually second boot partition)
petabeda said:
Just one thing: fastboot boot is not supported here, so If you are afraid, flash modified boot.img to recovery partition with fastboot flash recovery boot.img for test (adb reboot and then adb reboot recovery
You will lost your recovery, but, at least, no bricked device in case of error (recovery is actually second boot partition)
Click to expand...
Click to collapse
I have two surftab tablets. One version of the SIM card is fully functional. Another wifi version will not load. When loading, the orange logo at the moment of "collection" freezes. If there is, you can go into recovery even factory reset.
But nothing changes. I believe that the EMMC resource has been exhausted and therefore this behavior.
and to be honest, I don’t know how to write the partition. Since only the adb sideload command is available in recovery mode. Apparently, it is impossible to overwrite the firmware except through the programmer.
Until that time, I could not even pull out the firmware. Since there was no root access
Thank you for your help. As a thank you, I will give you a link to a tool to repair the Nexus 7 bootloader. Through a vulnerability in the tegra cpu. As I understand it, I use this method to hack the nintendo switch. I personally bought 4 nexus 2012 on the secondary market and one of them was able to restore in this way. They of them had a damaged eMMC other power controller. And even with a soldering station, I could not replace it because there is no suitable frame for the reball. In general, nexus are not bad, but there is very little disk space for installing google services and GAPPS are useless. And it is difficult to change partition. And it makes no sense because of the available firmware.
I see, you can''t unlock bootloader, because your device is not bootable at all. So, there is no way to get into fastboot mode?
We are anti e-waste fighters giving second chances!
The first photo is the available recovery menu. Where after choosing a factory reset, nothing changes. And through the adb update, only sideload mode is available.
The factory partition is not corrupted as the restore completes successfully. But the download fails. And not just does not occur, but freezes as in the screenshot above. Most likely a hardware problem eMMC.
Earlier, I saw something similar, for example, in Asus Zenpad, if turn off or connect the camera incorrectly, then the download stops. But here animation is stuck.
I don't know how to check eMMC exactly.
logs files is empty
And with recovery, no commands are available (like adb or fasboot)
There is a one way how to diagnose/repair/have fun with that Trekstor tablet - If you could and want to disassemble it:
have your tablet powered off
disassemble the tablet
carefully disconnect FFC cables (display and digitizer)
remove mainboard screws
at back side in the center of the board, there are three testpoints.......yes you are thinking right, these are actually 1.8V UART signals and GND
Connect these signals to your serial converter (in my case, Raspberry Pi), be careful and talk with the same loundnesses
Don''t power on the tablet, only plug usb cable, tablet will try boot and run healthd (charging mode with battery animation)
Your console will show you the magic (PBL/SBL) bootloader messages and Linux log and event, maybe, the console (though no root), lalalal (/dev/ttyFIQ0)
Wish you luck
After that, if everything goes well, you should be able to use reboot fastboot command to get fastboot mode !
Hi all,
Well, operator error is definitely at fault here... I made a series of mistakes that got me to where I am now. All I intended on doing was repairing my dad's tablet which was running atrociously slowly. I tried to follow some steps, but improvised as I was getting errors and obviously ended up making things a lot worse...
Now tuning on the tablet will directly go to a command line interface with a long series of errors and these are the last 2 lines:
Rich (BB code):
blkD :HardDisk - Alias (null)
PciRoot (0x0) /Pci (0x17,0x0) Ctrl (0x0) /HD(14,GPT,80868086-8086-8086-8086-000000000008,0x646828,0x16D47D8)
blkE :BlockDevice - Alias (null)
PciRoot (0x0) /Pci (0x17,0x0) Ctrl (0x0)
Press ESC in 1 seconds to skip startup.nsh, any other key to continue.
Shell> _
In this state it cannot be interacted with and won't be detected by my PC over USB.
This happens for normal, recovery and bootloader modes. The only mode that I can access is DNX mode but attempting to boot droidboot will result in the same command line UI described above, including when trying to restore the BIOS using the PC executable (which I assume needs to enter fastboot mode, which it can't do...).
What can I do now? Any way to get anything working in the above screen or through DNX?
I'm thinking that a partition was corrupt in addition to me wiping the ESP is causing this. Maybe it's possible to completely format and setup all the partitions and start from scratch again? How can I flash esp.img when all I have access to on the tablet is DNX mode?
Detailed history below...:
HISTORY
1)
The tablet is a Lenovo Yoga Tab 2 1050F. It was running very slowly to the point where my dad just didn't bother to use it. I thought it would be wise to factory reset it as a first step. There is no option to do so within the Lenovo skin of Android so I started by going into recovery mode and performed a factory reset from there.
After it rebooted, the Android UI would loop back to the language selection after connecting to a WiFi network and I would get "Unfortunately Google Play Services has stopped." error message. It would just loop through the Language Selection > Connect to WiFi network pages over and over.
2)
Having installed CM on my old S3 back in the day, I thought I could go about the same process and flash a gapps ZIP file in recovery mode. That didn't work, I got an error because the zip was unsigned.
I thought I could install TWRP to flash unsigned zips, reinstall Gapps and get the tablet passed the Android UI loop.
3)
I followed this guide on XDA to install an unofficial TWRP (which involved unlocking the bootloader). It didn't work because I couldn't flash over ADB (because the tablet couldn't allow Developer Mode since it was stuck in the Android UI loop). So I flashed as many files as I could in fastboot.
I eventually flashed the TWRP recovery.img but that didn't work : when turning on to Recovery mode it would just go back to the bootloader screen.
4)
I thought I must have screwed up something up so I tried to restore the BIOS using an executable I found but I realized the tablet was already upgraded to Lollipop and the only BIOS restoration exe was for Kitkat. Sure enough it got even worse and I could no longer boot Android.
5)
I still had bootloader and fastboot though so I followed a guide to restore the tablet to the original OS (which ironically I already downloaded before trying to get TWRP but forgot about and didn't unpack). I set up Intel Platform Tools but the flash process didn't work because it went to droidboot and then lost USB connection. On the Intel program it would just stay stuck at 20% Wiping ESP. It would time out twice and then give me a final error message.
6)
So I thought to explore the flash.xml file provided to see if I could do the steps manually. I knew it was stuck at wipe ESP because in droidboot it couldn't get commands from PC. So I went into fastboot and wiped ESP manually myself! Little did I know how foolish this was to do because I was simply unable to flash the provided ESP.img again. Following this I lost access to the bootloader.
7)
I found a guide to restore a bricked 1050F here on XDA but it needs droidboot which now goes to the command line UI described at the top of this post. When attempting to restore the kitkat BIOS again, droidboot is also needed which results in the same cmd UI.
8)
Which leads me to where I am now which is that the tablet doesn't boot to: normal, recovery, bootloader/fastboot or droidboot. Which is why I am now asking for help. What can I do?
I'm thinking that a partition was corrupt in addition to me wiping the ESP is causing this. Maybe it's possible to completely format and setup all the partitions and start from scratch again? How can I flash esp when all I can get access to is DNX mode?
Thanks for reading this far and if you have any more ideas, please let me know, thanks in advance.
Hi, would anyone like to weigh in on this issue?
I'll be very direct, I wanted to install twrp on nokia 5.4 so I was going to apply an update from adb but android recovery only gives me the Reboot system now;Enter fastboot;power off functions within fastboot:Reboot system now;enter recovery;Reboot to bootloader and Power off. Does anyone know how to solve this problem? I didn't find anything on the internet
unlocking nokia 3.4 bootloader
Hi iv got every thing setup to unlock the boot loader but now find out you need a pin which nokia doesnt give out (only nokia 8) was hoping to root with magisk but not sure how to continue without unlocking the boot loader. Is there some way to...
forum.xda-developers.com
This is intended, as triple-color company doesn't want us wipe data on a stolen phone.
To enter sideload mode, execute "adb reboot sideload" under normal OS.