Related
Hello,
I present to you very shortly and quickly the new MIUI ROM (multi-language) translated from the Official ROM for OnePlus One : ROM MIUI 4.9.5 (V5). This is the first translation of the first official release !
To download and try this address :
http://media.celogeek.com/roms/android/miui/4.9.12/xiaomi.eu_multi_A0001_4.9.12_v5-4.4.zip (languages available here : http://xiaomi.eu/community/threads/4-9-12.25694/)
Mirror [4.9.5] : https://mega.co.nz/#!qUtmUbAR!37QBGpwdOjkOma_3gY-rf0h6aOjWdSkeM4s_8grYp_w
Installation MIUI (or other ROM flashable with custom recovery) :
I remind you that neither I nor the forum we take responsibility for anything, everyone is aware of that is going to do.
Let's go :
1. Download the MIUI ROM and put it in your phone storage
2. Make sure your phone is properly detected by your PC
3. Boot phone in Bootloader Mode (Volume Up and Power) and flash a custom recovery like CWM Advanced Edition Philz Touch (http://forum.xda-developers.com/showthread.php?t=2201860)
4. Reboot in Recovery Mode (Volume Down and Power) and choose :
- Wipe and Format Options -> Clean to Install a New ROM (wipe datas, cache & dalvik-cache)
- or with other custom recovery : wipe data/factory reset -> wipe cache partition
5. After install the ROM, choose :
- Install Zip -> Choose zip from /sdcard -> select your ROM MIUI -> Reboot System Now
- or with other custom recovery : apply update -> choose from internal storage -> 0/ -> MIUI rom -> reboot system now
6. Enjoy MIUI v5 for OPO !
Notes:
If 4G is not enabled, use this procedure with the phone keypad *#*#4636#*#* then "phone information" -> "Set preferred network type" -> "TD-SCDMA, GSM/WCDMA and LTE" (or LTE/gsm auto)
Good flash
Sources: http://www.xiaomi.eu/
Thanks for this, was acctualy looking for this on the internet
---------- Post added at 08:43 PM ---------- Previous post was at 08:29 PM ----------
Does anyone have a mirrow? This link is way too slow
How can I change from using capacitor nav buttons to software nav buttons?
which gapps to use with this ROM?
Does this flash a Chinese custom recovery?
synergeticink said:
Does this flash a Chinese custom recovery?
Click to expand...
Click to collapse
I use the CWM Philz and no problem .
Linux4ever85 said:
How can I change from using capacitor nav buttons to software nav buttons?
Click to expand...
Click to collapse
Sorry, I have not found how to do... I'm not sure it is an integrated option in the ROM... maybe with a tweak.
some notes
1) it works perfectly with multirom
2) to install, in the updater script you must remove the first line (TWRP and european Oneplus)
3) WSM tools works with reboot option but Mi-Tools doesn't work for me...was anyone able to make them working?
Can we use custom kernels?
Sent from my A0001 using XDA Free mobile app
Lesson learned
I decided to try this rom so I figured I would do the safe thing and went into recovery and did a complete back up and then installed this rom. Didn't really like it so I thought I would go back and restore my previous rom guess what my custom recovery was gone and all my roms that were stored on my phone. Had to redo everything which took a very long time. So imo use multi rom and install along side of other rom so that you can go back and forth between them. That way you can decide which one you want to use as your daily rom.
i flashed it yesterday for a short time, cause of missing german language i decided to stick with cm11 nightlys
But as few said, the recovery was gone, i cant confirm this, my philz recovery was still there and i could restore my cm as normal!
How to enable 4g?
alexanderi said:
How to enable 4g?
Click to expand...
Click to collapse
*#*#4636#*#* phone information -> LTE/gsm
Does anyone knows how to apply the flashlight gesture?
I just installed the apk with the music and camera , but im really missing the flashlight :S
mca1490 said:
Does anyone knows how to apply the flashlight gesture?
I just installed the apk with the music and camera , but im really missing the flashlight :S
Click to expand...
Click to collapse
lol , nice rom, but where is system update?
You can use device conytrol to enable flashlight gesture
this rom is amazing...
but i would know when there will be an update to v6 for our device!!!thanks
about the rom for me it hasnt bugs
can any one provide me google drive mirror
Every time on lockscreen I have to press volume up + back key. why is that??
Wtf. Paying for faster Themedownload? I go back to Stock.
Noname2012 said:
Wtf. Paying for faster Themedownload? I go back to Stock.
Click to expand...
Click to collapse
Where did you see this at?
All of us have, one wish to have a custom rom on our device.
After few days of web browsing, I founded one really cool possibility, and that is idea of using
SAMSUNG GALAXY V CUSTOM ROM.
Thats true we can use them all, and all of them can be finded on :
http://www.galaxyvarchive.blogspot.com/
But after flashing via CWM, you will need to flash custom build prop of our phone.
If you are new in flashing custom roms continue reading, and also there will be special note how to flash build prop correctly !
INSTRUCTIONS :
1) Turn phone in CWM(Hold power,menu and volume up button together)
2) Wipe data, cash, dalvik-placed in advanced options
3) Chose zip from sd card, and search rom you are download (Zentouch V2, and Nemoid recommanded)
4)wait till install complete
******* THEN YOU WILL NEED TO INSTALL BUILD PROP ! *********
1) after installation of rom dont turn of recovery
2) again wipe dalvik
3)choose build prop and wait till complete
4)Reboot your device and enjoy !
NOTE: ZENTOUCH, AND NEMOID DONT CONTAIN ANY ERRORS (JUST IF YOU FLASH TEIR UPDATES YOU NEED TO FLASH CLEAN ROM, DONT UPDATES OF THIS ROMS), AND DONT EXTRACT ZIP FILE OF ROM OR BUILD PROP IT NEED TO BE LIKE THAT !
AND THIS WORKS FOR ALL OF OUR SM-G130 VERSIONS!
CWM IF YOU DONT HAVE IT
So first what you will need is ODIN 3.09 To instal cwm recovery
1) Start odin(note: phone must be unplugged)
2) Turn phone into download mode
3) Check ap box, and find cwm.tar file placed on your pc after download and than select it..
4) Flash it via odin
5) Reboot your phone
6) Turn it off again
7) Press volume +, home and power button and voila you got cwm
Please press tnx
MirnesAndroidYoung2 said:
NOTE: ZENTOUCH, AND NEMOID DONT CONTAIN ANY ERRORS (JUST IF YOU FLASH TEIR UPDATES YOU NEED TO FLASH CLEAN ROM, DONT UPDATES OF THIS ROMS), AND DONT EXTRACT ZIP FILE OF ROM OR BUILD PROP IT NEED TO BE LIKE THAT !
AND THIS WORKS FOR ALL OF OUR SM-G130 VERSIONS!
Click to expand...
Click to collapse
I installed 3 different roms, followed the instructions and flashed buildprop. With all roms I get the same error: "unfortunately, the process com.android.systemui has stopped". The Galaxy V is 480x800 pixels, roms are no good, they don't display correctly. Some of the phone dialler numbers are not displaying because of the different resolution. We need a rom adapted to our phone.
MirnesAndroidYoung2 said:
All of us have, one wish to have a custom rom on our device.
After few days of web browsing, I founded one really cool possibility, and that is idea of using
SAMSUNG GALAXY V CUSTOM ROM.
Thats true we can use them all, and all of them can be finded on :
http://www.galaxyvarchive.blogspot.com/
But after flashing via CWM, you will need to flash custom build prop of our phone.
If you are new in flashing custom roms continue reading, and also there will be special note how to flash build prop correctly !
INSTRUCTIONS :
1) Turn phone in CWM(Hold power,menu and volume up button together)
2) Wipe data, cash, dalvik-placed in advanced options
3) Chose zip from sd card, and search rom you are download (Zentouch V2, and Nemoid recommanded)
4)wait till install complete
******* THEN YOU WILL NEED TO INSTALL BUILD PROP ! *********
1) after installation of rom dont turn of recovery
2) again wipe dalvik
3)choose build prop and wait till complete
4)Reboot your device and enjoy !
NOTE: ZENTOUCH, AND NEMOID DONT CONTAIN ANY ERRORS (JUST IF YOU FLASH TEIR UPDATES YOU NEED TO FLASH CLEAN ROM, DONT UPDATES OF THIS ROMS), AND DONT EXTRACT ZIP FILE OF ROM OR BUILD PROP IT NEED TO BE LIKE THAT !
AND THIS WORKS FOR ALL OF OUR SM-G130 VERSIONS!
CWM IF YOU DONT HAVE IT
So first what you will need is ODIN 3.09 To instal cwm recovery
1) Start odin(note: phone must be unplugged)
2) Turn phone into download mode
3) Check ap box, and find cwm.tar file placed on your pc after download and than select it..
4) Flash it via odin
5) Reboot your phone
6) Turn it off again
7) Press volume +, home and power button and voila you got cwm
Please press tnx
Click to expand...
Click to collapse
Any news on how to make roms work? Thanks
razvangrig said:
Any news on how to make roms work? Thanks
Click to expand...
Click to collapse
I just got the touch screen of my SM-G130 repaired and my phone was "gone" for a few weeks. Had no chance yet to try these custom ROMs. I am going away now for summer holidays, but when I return halfway August I am gonna try the ROMs and will post my experiences. Bye bye.
Thnx for this post(searching for post of our young 2 for weeks). Gonna try these roms
But there is one problem Both deletes my IMEI number so, I cant use my SIM.
Zentouch V2 works perfectly in mi Young 2. I will write a post in HTCMania, in Spanish, on how install the ROM.
TuTrolloLove said:
Zentouch V2 works perfectly in mi Young 2. I will write a post in HTCMania, in Spanish, on how install the ROM.
Click to expand...
Click to collapse
Did you use SM-G130 BUILDPROP.zip from this thread? Can you please post the instructuons or the link to htcmania thread? Thank you
razvangrig said:
Did you use SM-G130 BUILDPROP.zip from this thread? Can you please post the instructuons or the link to htcmania thread? Thank you
Click to expand...
Click to collapse
Yes, I used the buildpro this post. I can not post links. Enter HTCMania, see section Samsung, look at other Samsung smartphones and find the post with the following name: Instalar Custom ROM en Galaxy Young 2 That's my post. Luck.
Found it, thanks:
http://www.htcmania.com/showthread.php?t=1047334
Zentouch Rom:
http://forum.xda-developers.com/android/development/rom-zentouch-rom-galaxy-sm-g313hz-t3140610
Hi there people,
Do you guys experience significant performance / speed increase with these custom roms, in comparison with the stock rom?
Thanks!
I'm sharing with you another build.prop for those who have got a SM-G130HN device and wanna install ZenTouch ROM v2:
View attachment SM-G130HN_BUILDPROP.zip
It's a flashable ZIP, don't worry about that.
TuTrolloLove said:
Zentouch V2 works perfectly in mi Young 2. I will write a post in HTCMania, in Spanish, on how install the ROM.
Click to expand...
Click to collapse
Thanks to you I've got to these threads about this device, haha…
I can't receive calls with any rom of Samsung Galaxy V that install in SM-G130M...
There are quite a few modem fixes floating around for C6802 but a lot of them don't work with android 5.1 (i tried every single one of them)
ISSUE
I have a c6802 and i just couldn't get any custom rom to detect my sim card, thus no cellular network. The IMEI was unknown or blank. Here's how to fix it
FIX
- Boot into recovery
- Make a backup
- flash the custom rom you want
- flash GApps (if applicable)
- flash the attached file (modem)
- Wipe cache/dalvik
- reboot
WORKS WITH
This will work for any 5.x based custom rom.
WORKS?
like a charm
Disclaimer:
Obviously, i am not responsible if you break your device.
inshadesofgrey said:
There are quite a few modem fixes floating around for C6802 but a lot of them don't work with android 5.1 (i tried every single one of them)
ISSUE
I have a c6802 and i just couldn't get any custom rom to detect my sim card, thus no cellular network. The IMEI was unknown or blank. Here's how to fix it
FIX
- Boot into recovery
- Make a backup
- flash the custom rom you want
- flash GApps (if applicable)
- flash the attached file (modem)
- Wipe cache/dalvik
- reboot
WORKS WITH
This will work for any 5.x based custom rom.
WORKS?
like a charm
Disclaimer:
Obviously, i am not responsible if you break your device.
Click to expand...
Click to collapse
I know where u got this fix from and just renaming the file name doesn't change the md5 and sha checksums. Kindly update ur Op with proper credits to the person who created this zip.
inshadesofgrey said:
There are quite a few modem fixes floating around for C6802 but a lot of them don't work with android 5.1 (i tried every single one of them)
ISSUE
I have a c6802 and i just couldn't get any custom rom to detect my sim card, thus no cellular network. The IMEI was unknown or blank. Here's how to fix it
FIX
- Boot into recovery
- Make a backup
- flash the custom rom you want
- flash GApps (if applicable)
- flash the attached file (modem)
- Wipe cache/dalvik
- reboot
WORKS WITH
This will work for any 5.x based custom rom.
WORKS?
like a charm
Disclaimer:
Obviously, i am not responsible if you break your device.
Click to expand...
Click to collapse
Hi
How u got network oncustom roms after flashing thus?
I tried bliss pop and resurrection rom
I flashed rom n gapps as on ever phone
Then i flashed this
Let phone boot and what i see i no sim card still
Plzz help!!!!
I m on stock 5.0 now
happy3777 said:
Hi
How u got network oncustom roms after flashing thus?
I tried bliss pop and resurrection rom
I flashed rom n gapps as on ever phone
Then i flashed this
Let phone boot and what i see i no sim card still
Plzz help!!!!
I m on stock 5.0 now
Click to expand...
Click to collapse
it should be working technically on aosp based roms . Can u try to flash scrubbers port with it. Also check the md5 of the zip u downloaded as @Galaxtus has already mentioned this to be working on AOSP based roms .
flashing instructions
http://forum.xda-developers.com/showpost.php?p=62497163&postcount=1073
the modem zip in this thread is same as the op mentioned above. This is from a chinese forum .
Here is drive link if u need
http://forum.xda-developers.com/showpost.php?p=62497606&postcount=245
Thanxx a lot
Will try in that way n report...
I have the exact same model as your phone, and it works fine.
Try this:
- make backup
- wipe everything
- flash stock .270 again (android 5.0.2)
- go to fast boot mode
- open flash tool
- hotboot scrubberGPE KERNEL (and push volume down when it restarts
- flash rom
- flash gapps
- flash modem
- post results
Is there a modem fix for c6833?
i am using [ROM] [ togari ] AICP - 11.0 - MM 6.0.1_r43 | OFFICIAL NIGHTLIES which is marshmallow. I have the same issue. Can i use this patch to resolve the issue or is there any other file which i need to flash. Also is there any way that i could flash a custom recovery on this rom as i have lost my recovery after flashing this rom.
bro if i install any custom rom i face in no sim card problem y so......
krithvii said:
bro if i install any custom rom i face in no sim card problem y so......
Click to expand...
Click to collapse
Are you sure you have flashed the latest stock rom at least once? The latest at the moment is: Android 5.1.1, 14.6.A.1.236
If not you can go back to stock rom and wait for phone to download all the OTA's it will find.
Or you can download Flashtool software to directly download the ftf file and flash it to the phone.
http://www.flashtool.net/index.php
m on the latest update
krithvii said:
m on the latest update
Click to expand...
Click to collapse
What model do you have? C68xx
Are your bootloader unlocked?
Does not work for me
Even this one does not seem to work for me shows the error invalid footer header something,
I'm on CM12.1 nightly a old version
Is it only for 5.1? or will work on 5.1.1 ROMS too
Really want to try other ROMS with Networks tired of the stock roms
ROM SM-P601 P601XXDOK4 (New Firmware release)
This will trip KNOX....
So you have been warned about all possible consequences. I am not responsible of anything that can happens to your device.
Please test and report.
Video Preview:
Latest firmware from Samsung P601XXDOK4 LL 5.1.1
Stock.
Deodexed.
Zipaligned.
Not Root ( to root flash SuperSU HERE )
FrameWork:
- 5 Way Reboot TW lollipop
SystemUI :
- Add new effects (WaterDroplet,SparklingBubbles,LensFlare,POPPINGCOLOURS )
- Mod quick icon Note 5 MM 6.0
- Recent bar trans
- Hide backup password text and icon.
Secsetting:
- Remove Power Saving Notification
- Change Modified device status to Normal
Touchwiz home:
- Note 5 icon mod ( folder, all app button)
- SoundAlive_20 support all bluetooth
- CSC tweak and mod
- Enable SD card write permittion
Backup FIRST
- Reboot in Recovery, Power off then push Power and volume up for 3 seconds, release buttons. Wait until TWRP load.
Factory reset and wipe all but Internal and SDcard.
Flash the ROM in recovery with TWRP 2.8.7.0. After flashing if TWRP ask to fix root, DO NOT INSTALL!
Downloads:
P601DOK4ModBinh24 Deoxed
AirCommand Note 5 _for_Note 10.1 2014 (Android 5.1.1)
Download HERE
PRESS THANKS NOW
After doing a full wipe (cache, dalvik cache, system, internal memory) and install, is stuck on black screen. and installing on another rom and doing the wipes, to start, multiple system applications are giving force close constantly.
This rom has the language PT-BR? If not, how can I add?
pcparaosamigos said:
After doing a full wipe (cache, dalvik cache, system, internal memory) and install, is stuck on black screen. and installing on another rom and doing the wipes, to start, multiple system applications are giving force close constantly.
This rom has the language PT-BR? If not, how can I add?
Click to expand...
Click to collapse
Flash stock P601XXDOK4 ROM then my ROM
TO enable PT-BR you can try to delete language.xml on system/csc
binh24 said:
Flash stock P601XXDOK4 ROM then my ROM
TO enable PT-BR you can try to delete language.xml on system/csc
Click to expand...
Click to collapse
You didn't explain the word "then" is it clean or dirty flash, anyway, I have tried both ways to flash your ROM.
1. Dirty Flash
The ROM was successfully flashed, but when I go for setting, it FC.
2. Clean Flash
It won't boot at all, stop on blank screen after Samsung logo.
I have tried both ways, without any mods, SuperSU or any additional apps. Thus, I believe, your ROM is conflicting with the original stock. This is almost the same as the other deodexed DOK4 ROM, while the DOJ5 ROM seems working nicely.
Perhaps it is better to play around with DOJ5 ROM instead of DOK4, or maybe you can find the error on future development. Thanks for your wonderful effort, your ROM surely looks better than the stock, just need some fixing. Keep up the work.
How To Flash This ROM + SuperSU
binh24 said:
Flash stock P601XXDOK4 ROM then my ROM
TO enable PT-BR you can try to delete language.xml on system/csc
Click to expand...
Click to collapse
binh24 said:
ROM SM-P601 P601XXDOK4 (New Firmware release)
This will trip KNOX....
So you have been warned about all possible consequences. I am not responsible of anything that can happens to your device.
Please test and report.
Video Preview:
Latest firmware from Samsung P601XXDOK4 LL 5.1.1
Stock.
Deodexed.
Zipaligned.
Not Root ( to root flash SuperSU HERE )
FrameWork:
- 5 Way Reboot TW lollipop
SystemUI :
- Add new effects (WaterDroplet,SparklingBubbles,LensFlare,POPPINGCOLOURS )
- Mod quick icon Note 5 MM 6.0
- Recent bar trans
- Hide backup password text and icon.
Secsetting:
- Remove Power Saving Notification
- Change Modified device status to Normal
Touchwiz home:
- Note 5 icon mod ( folder, all app button)
- SoundAlive_20 support all bluetooth
- CSC tweak and mod
- Enable SD card write permittion
Backup FIRST
- Reboot in Recovery, Power off then push Power and volume up for 3 seconds, release buttons. Wait until TWRP load.
Factory reset and wipe all but Internal and SDcard.
Flash the ROM in recovery with TWRP 2.8.7.0. After flashing if TWRP ask to fix root, DO NOT INSTALL!
Downloads:
P601DOK4ModBinh24 Deoxed
AirCommand Note 5 _for_Note 10.1 2014 (Android 5.1.1)
Download HERE
PRESS THANKS NOW
Click to expand...
Click to collapse
Finally I have succeeded to flash this good looking ROM on my SM-P601, these are the steps;
(Please follow and read properly)
-----------------------------------------------------------------------------------------------------------------
1. Download deodexed DOJ5 ROM from the next door thread (Official Deodexed)
2. As usual, put it on your SDCard
3. Boot into TWRP, for me, I use TWRP 2.8.76
4. Flash the deodexed DOJ5 ROM til its done (by default it will install SuperSU 2.52)
5. When DOJ5 is done, do clean dalvik and cache, just those 2 and no others
6. Then flash this modded DOK4 ROM and wait til its done
**Though this modded DOK4 is deodexed, it has no root access which it will conflict with the previous installed DOJ5 and it may cause boot failure or bootloop, thus, you need systemless SuperSU
7. Next is to flash SuperSU 2.66 (I haven't tried using CF AutoRoot)
8. When everything is complete, again do clean dalvik and cache
9. Boot to system without installing SuperSU from TWRP (it will ruin systemless SuperSU 2.66)
**REMEMBER TO NEVER INSTALL SUPERSU FROM TWRP IT WILL BREAK ROOT
--------------------------------------------------------------------------------------------------------------------
Result are shown by attached picture
1. Base ROM is DOK4
2. Baseband is DOJ4
3. Note 5 Icons and appearance
4. Root access
5. Ext SDCard access R/W
6. 5 ways on reboot menu (on restart option)
7. Camera is working
8. Latest Google Play
9. Updated Galaxy Apps
10. ViperFX Working
11. Air Command Working (Disable default air command if you wish to use this new looks)
That's all folks, enjoy the ROM and please be kind to say thank you on binh24' wonderful work for our beloved SM-P601.
Maaciiih cemuaaah...... Salam dari Jakarta
ghembuls said:
Finally I have succeeded to flash this good looking ROM on my SM-P601, these are the steps;
(Please follow and read properly)
-----------------------------------------------------------------------------------------------------------------
1. Download deodexed DOJ5 ROM from the next door thread (Official Deodexed)
2. As usual, put it on your SDCard
3. Boot into TWRP, for me, I use TWRP 2.8.76
4. Flash the deodexed DOJ5 ROM til its done (by default it will install SuperSU 2.52)
5. When DOJ5 is done, do clean dalvik and cache, just those 2 and no others
6. Then flash this modded DOK4 ROM and wait til its done
**Though this modded DOK4 is deodexed, it has no root access which it will conflict with the previous installed DOJ5 and it may cause boot failure or bootloop, thus, you need systemless SuperSU
7. Next is to flash SuperSU 2.66 (I haven't tried using CF AutoRoot)
8. When everything is complete, again do clean dalvik and cache
9. Boot to system without installing SuperSU from TWRP (it will ruin systemless SuperSU 2.66)
**REMEMBER TO NEVER INSTALL SUPERSU FROM TWRP IT WILL BREAK ROOT
--------------------------------------------------------------------------------------------------------------------
Result are shown by attached picture
1. Base ROM is DOK4
2. Baseband is DOJ4
3. Note 5 Icons and appearance
4. Root access
5. Ext SDCard access R/W
6. 5 ways on reboot menu (on restart option)
7. Camera is working
8. Latest Google Play
9. Updated Galaxy Apps
10. ViperFX Working
11. Air Command Working (Disable default air command if you wish to use this new looks)
That's all folks, enjoy the ROM and please be kind to say thank you on binh24' wonderful work for our beloved SM-P601.
Maaciiih cemuaaah...... Salam dari Jakarta
Click to expand...
Click to collapse
I really decided to try to make a rom deodexed and after breaking a bit the head, I made my first full, rom, deodexed rooted, debloated, although still have been useless applications each man to see. But gradually I am improving yourself. at the moment, my full testing rom p601xxudoj4 region SER. Working so far And normal. i would like to learn how to make mods, like the menu off with 5 functions. finally, one step at a time.
Has anyone tried to flash the air command alone? does it work?
ridicul0us said:
Has anyone tried to flash the air command alone? does it work?
Click to expand...
Click to collapse
It working for me
datdoan said:
It working for me
Click to expand...
Click to collapse
Hi, are you using P601XXDOK4 rom? I'm using P601ODDDOJ3 from India and I think it only works if I flash it with the lockscreen effect.
P601xxudok4
Stock rom cooked by me.
● Deodexed
● Debloated
● Rooted with new method that does not generate conflict with bootloader
● Fix external sdcard write
● All languages available
● Knox removed
⊙ advisable to do an installation clean. it may be that the screen is black in the part to choose the languages. turn off and turn on the screen that all back to normal.
● Link: https://drive.google.com/file/d/0B2a0geYLaY0oZ1VCT1BDeUFKbGM/view?usp=docslist_api
ridicul0us said:
Hi, are you using P601XXDOK4 rom? I'm using P601ODDDOJ3 from India and I think it only works if I flash it with the lockscreen effect.
Click to expand...
Click to collapse
yes, i using DOK4 ROM.
can i install this rom directly to P602? is this work?
stormy_ugur said:
can i install this rom directly to P602? is this work?
Click to expand...
Click to collapse
I do not know if will work. and they both p601 p602 possess the same hardware, but I do not have a problem with bootloader. you try if you have a way to restore your device in case of error.
This ROM look good. I am downloading.:laugh:
binh24 said:
ROM SM-P601 P601XXDOK4 (New Firmware release)
This will trip KNOX....
So you have been warned about all possible consequences. I am not responsible of anything that can happens to your device.
Please test and report.
Video Preview:
Latest firmware from Samsung P601XXDOK4 LL 5.1.1
Stock.
Deodexed.
Zipaligned.
Not Root ( to root flash SuperSU HERE )
FrameWork:
- 5 Way Reboot TW lollipop
SystemUI :
- Add new effects (WaterDroplet,SparklingBubbles,LensFlare,POPPINGCOLOURS )
- Mod quick icon Note 5 MM 6.0
- Recent bar trans
- Hide backup password text and icon.
Secsetting:
- Remove Power Saving Notification
- Change Modified device status to Normal
Touchwiz home:
- Note 5 icon mod ( folder, all app button)
- SoundAlive_20 support all bluetooth
- CSC tweak and mod
- Enable SD card write permittion
Backup FIRST
- Reboot in Recovery, Power off then push Power and volume up for 3 seconds, release buttons. Wait until TWRP load.
Factory reset and wipe all but Internal and SDcard.
Flash the ROM in recovery with TWRP 2.8.7.0. After flashing if TWRP ask to fix root, DO NOT INSTALL!
Downloads:
P601DOK4ModBinh24 Deoxed
AirCommand Note 5 _for_Note 10.1 2014 (Android 5.1.1)
Download HERE
PRESS THANKS NOW
Click to expand...
Click to collapse
successed install this Rom. but there are 2 problems :
1. always showup notification securitu notice
unauthorized actions have been detected. tap here for more information.
=> how to stop this notification??
2. air command
yes it works. but so sad the function isn't the same with note 5 function. for example : screen write. I cannot capture like note 5 do. wish it have note 5 function hehehe.
I know this is a little off topic but i didnt know whether or not to make a new topic so i thought I'd ask. I download the official 5.1.1 rom for P601 from sammobile. Thing is, its the Russian one (P601XXUDOJ2_P601SERDOJ2_SER) and mine is from South Africa (P601XXUCNJ1)
Will it work as normal on my device? I am not rooted
Sent from my SM-G925F using Tapatalk
timberland88 said:
I know this is a little off topic but i didnt know whether or not to make a new topic so i thought I'd ask. I download the official 5.1.1 rom for P601 from sammobile. Thing is, its the Russian one (P601XXUDOJ2_P601SERDOJ2_SER) and mine is from South Africa (P601XXUCNJ1)
Will it work as normal on my device? I am not rooted
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
It should work without any problem
hope it can help
pippone121263 said:
It should work without any problem
hope it can help
Click to expand...
Click to collapse
Thanks for the feedback. Flashed it via Odin. Had some lag upon the first reboot but a factory reset solved the problem. Running very smooth
Sent from my SM-G925F using Tapatalk
timberland88 said:
Thanks for the feedback. Flashed it via Odin. Had some lag upon the first reboot but a factory reset solved the problem. Running very smooth
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
Did you flash twrp after you flashed the rom. I am failing to get recovery flashed.
Sent from my SM-P601 using Tapatalk
s2mishappy said:
successed install this Rom. but there are 2 problems :
1. always showup notification securitu notice
unauthorized actions have been detected. tap here for more information.
=> how to stop this notification??
Click to expand...
Click to collapse
------Solution--------------------------------------
1. Install free "Package Disabler" Or 'Titanium BackUp' from Google Play Store.
2. Launch this app, search for "SecurityLogAgent".
3. Then disable/freeze it.
Do not do anything else. That's it.
Result: You will not see this annoying notification again.
Welcome to the Afaneh ROM
Disclaimer1: Your warranty is now void!
I am not responsible if you brick your phone. or kill your sd card!
I cannot be held responsible for smoke, fire, water, or other natural disasters.
So please READ the entire OP!
Disclaimer2: Always make a backup first!! Flash at your own risk!
Clean install is always recommended, but at minimum make sure you wipe!
ROM FEATURES
Based on I9505XXUHPA1.
Fully De-odexed.
Rooted.
De-Knoxed.
BusyBox.
Latest ZipAling.
Semi debloated.
CSC Tweaks
Free Tether Mod.
Multi languages support.
And more you will notice.
How to get rid of kingroot
here
Instructions to Install this Rom:
FlashFire install instructions:
Coming from 4.4.2 or Below
- Open FlashFire.
- Press the "+" button and select Wipe (Select System Data, 3rd Party Apps, Dalvik and Cache)
- Press the "+" button and select "Flash ZIP or OTA"
- Add Afaneh_ROM_VX.XX.zip
- Add OC1_firmware.zip
- Add OC1 SS/FF Flashable Kernel.zip
- Leave "Auto-Mount" unchecked and make sure EverRoot is disabled
- Make sure the order is Wipe, ROM, Kernel(OF1 users only) then press FLASH then OK.
- Phone will reboot, wait that it complete the first boot It takes around 5 minutes!
Coming from OC1/OF1:
- Open FlashFire.
- Press the "+" button and select Wipe (Select System Data, 3rd Party Apps, Dalvik and Cache)
- Press the "+" button and select "Flash ZIP or OTA"
- Add Afaneh_ROM_VX.XX.zip
- Add S4_VZW_OF1_Flashable_Kernel.zip only if you are on OF1 bootloader.
- Leave "Auto-Mount" unchecked and make sure EverRoot is disabled
- Make sure the order is Wipe, ROM, Kernel(OF1 users only) then press FLASH then OK.
- Phone will reboot, wait that it complete the first boot It takes around 5 minutes!
SafeStrap install instructions:
Coming from 4.4.2 or Below
- Boot into SS
- Flash Afaneh_ROM_VX.XX.zip
- Flash OC1_firmware.zip
- Flash OC1 SS/FF Flashable Kernel.zip
- Reboot system.
- wait that it complete the first boot It takes around 5 minutes!
Make sure that Kernel is last thing you flash.
Coming from any OC1/OF1
- Use NC5Flasher to flash the NC5 Kernel and reboot. This will boot you straight into SS.
- Flash Afaneh_ROM_VX.XX.zip
- Flash OC1 SS/FF Flashable Kernel.zip
- Reboot system.
- wait that it complete the first boot It takes around 5 minutes!
MDK Install Instructions:
Must be on OC1 Modem
skip MDK kernel flash will end with soft brick as ROM contain non Loki'd OC1 kernel
- Boot into TWRP Recovery or recovery of your choice
- Flash Afaneh_ROM_VX.XX.zip
- Flash any Loki'd MDK kernel like AIO kernel TW 5.0.1
- Reboot system.
- wait that it complete the first boot It takes around 5 minutes!
Bugs:
- 4G not working on v1.00
Downloads:
androidfilehost
Thanks to:
SuperR for kitchen
Chainfire For SuperSU.
Stericson For BusyBox.
Samsung for lollipop.
Verizon for locked bootloader.
me.
Change log:
[Mar 01, 2016] Afaneh ROM V1.00
Initial release with stock I9505XXUHPA1a lil bit modified.
Addons & Fixes
Proximity_Sensor_Fix_Afaneh_v1.00
Screen shots for v1.00
Screenshots? Or is it pretty much stock?
ATGkompressor said:
Screenshots? Or is it pretty much stock?
Click to expand...
Click to collapse
For now its stock but a lil different from stock verizon one.
Will be a good and stable base to start with.
Screen shot added to post #3
mohammad.afaneh said:
Change log:
[Mar 01, 2016] Afaneh ROM V1.00
Initial release with stock I9505XXUHPA1a lil bit modified.
Click to expand...
Click to collapse
Looks nice! I'm curious though. Why port a ATT Rom to a Verizon phone?
jwhistler said:
Looks nice! I'm curious though. Why port a ATT Rom to a Verizon phone?
Click to expand...
Click to collapse
This is not at&t ROM this is for I9505 the international LTE version of s4.
One reason is this ROM have the latest updates from samsung and libstagefright patch and more.
i accidentally flashed this on my i9505 and menu and back doesnt work anymore( i tried all stock fw..nothing
can u help ?
RazOne said:
i accidentally flashed this on my i9505 and menu and back doesnt work anymore( i tried all stock fw..nothing
can u help ?
Click to expand...
Click to collapse
This ROM has Verizon kernel may it break the menu and back keys for you, try flash I9505 5.0.1 kernel.
I this doesnt help flash full I9505XXUHPA1 via odin.
i reinstalled firmware;( no luck(
The rom is good. But where is a 4G? Is there 4G?
Seeeerggg said:
The rom is good. But where is a 4G? Is there 4G?
Click to expand...
Click to collapse
I have 4G sim but my career not puplished 4G yet I cant test now but the ROM based on I9505 the 4G version of s4.
Go to Settings > More Networks > Network Mode >Select LTE/CDMA option.
Tap OK and the device will apply the new settings and restart.
mohammad.afaneh said:
I have 4G sim but my career not puplished 4G yet I cant test now but the ROM based on I9505 the 4G version of s4.
Go to Settings > More Networks > Network Mode >Select LTE/CDMA option.
Tap OK and the device will apply the new settings and restart.
Click to expand...
Click to collapse
Unfortunately,it doesn't work.
Seeeerggg said:
Unfortunately,it doesn't work.
Click to expand...
Click to collapse
I will look into it soon.
I'm really liking this rom bro, I hope you keep it going. If it had all apps in multi window by default with the pop-up windows enabled it would be my dd for sure. ?
EarthquakeJake said:
I'm really liking this rom bro, I hope you keep it going. If it had all apps in multi window by default with the pop-up windows enabled it would be my dd for sure. ��
Click to expand...
Click to collapse
I will start working on this ROM soon.
In case of I dont have time I will upload every mod as flashable package.
Proximity_Sensor_Fix_Afaneh_v1.00
mohammad.afaneh said:
Proximity_Sensor_Fix_Afaneh_v1.00
Click to expand...
Click to collapse
Is there a problem with the proximity sensor? I hadn't noticed
EarthquakeJake said:
Is there a problem with the proximity sensor? I hadn't noticed
Click to expand...
Click to collapse
sometime it stuck so I used the libs from OC1.
Probably should include specific info on variant on kernel and 4 g problems in op to save members from troubles until you have a handle on bugs, I by no means am dissing your work just a friendly suggestion