There are quite a few modem fixes floating around for C6802 but a lot of them don't work with android 5.1 (i tried every single one of them)
ISSUE
I have a c6802 and i just couldn't get any custom rom to detect my sim card, thus no cellular network. The IMEI was unknown or blank. Here's how to fix it
FIX
- Boot into recovery
- Make a backup
- flash the custom rom you want
- flash GApps (if applicable)
- flash the attached file (modem)
- Wipe cache/dalvik
- reboot
WORKS WITH
This will work for any 5.x based custom rom.
WORKS?
like a charm
Disclaimer:
Obviously, i am not responsible if you break your device.
inshadesofgrey said:
There are quite a few modem fixes floating around for C6802 but a lot of them don't work with android 5.1 (i tried every single one of them)
ISSUE
I have a c6802 and i just couldn't get any custom rom to detect my sim card, thus no cellular network. The IMEI was unknown or blank. Here's how to fix it
FIX
- Boot into recovery
- Make a backup
- flash the custom rom you want
- flash GApps (if applicable)
- flash the attached file (modem)
- Wipe cache/dalvik
- reboot
WORKS WITH
This will work for any 5.x based custom rom.
WORKS?
like a charm
Disclaimer:
Obviously, i am not responsible if you break your device.
Click to expand...
Click to collapse
I know where u got this fix from and just renaming the file name doesn't change the md5 and sha checksums. Kindly update ur Op with proper credits to the person who created this zip.
inshadesofgrey said:
There are quite a few modem fixes floating around for C6802 but a lot of them don't work with android 5.1 (i tried every single one of them)
ISSUE
I have a c6802 and i just couldn't get any custom rom to detect my sim card, thus no cellular network. The IMEI was unknown or blank. Here's how to fix it
FIX
- Boot into recovery
- Make a backup
- flash the custom rom you want
- flash GApps (if applicable)
- flash the attached file (modem)
- Wipe cache/dalvik
- reboot
WORKS WITH
This will work for any 5.x based custom rom.
WORKS?
like a charm
Disclaimer:
Obviously, i am not responsible if you break your device.
Click to expand...
Click to collapse
Hi
How u got network oncustom roms after flashing thus?
I tried bliss pop and resurrection rom
I flashed rom n gapps as on ever phone
Then i flashed this
Let phone boot and what i see i no sim card still
Plzz help!!!!
I m on stock 5.0 now
happy3777 said:
Hi
How u got network oncustom roms after flashing thus?
I tried bliss pop and resurrection rom
I flashed rom n gapps as on ever phone
Then i flashed this
Let phone boot and what i see i no sim card still
Plzz help!!!!
I m on stock 5.0 now
Click to expand...
Click to collapse
it should be working technically on aosp based roms . Can u try to flash scrubbers port with it. Also check the md5 of the zip u downloaded as @Galaxtus has already mentioned this to be working on AOSP based roms .
flashing instructions
http://forum.xda-developers.com/showpost.php?p=62497163&postcount=1073
the modem zip in this thread is same as the op mentioned above. This is from a chinese forum .
Here is drive link if u need
http://forum.xda-developers.com/showpost.php?p=62497606&postcount=245
Thanxx a lot
Will try in that way n report...
I have the exact same model as your phone, and it works fine.
Try this:
- make backup
- wipe everything
- flash stock .270 again (android 5.0.2)
- go to fast boot mode
- open flash tool
- hotboot scrubberGPE KERNEL (and push volume down when it restarts
- flash rom
- flash gapps
- flash modem
- post results
Is there a modem fix for c6833?
i am using [ROM] [ togari ] AICP - 11.0 - MM 6.0.1_r43 | OFFICIAL NIGHTLIES which is marshmallow. I have the same issue. Can i use this patch to resolve the issue or is there any other file which i need to flash. Also is there any way that i could flash a custom recovery on this rom as i have lost my recovery after flashing this rom.
bro if i install any custom rom i face in no sim card problem y so......
krithvii said:
bro if i install any custom rom i face in no sim card problem y so......
Click to expand...
Click to collapse
Are you sure you have flashed the latest stock rom at least once? The latest at the moment is: Android 5.1.1, 14.6.A.1.236
If not you can go back to stock rom and wait for phone to download all the OTA's it will find.
Or you can download Flashtool software to directly download the ftf file and flash it to the phone.
http://www.flashtool.net/index.php
m on the latest update
krithvii said:
m on the latest update
Click to expand...
Click to collapse
What model do you have? C68xx
Are your bootloader unlocked?
Does not work for me
Even this one does not seem to work for me shows the error invalid footer header something,
I'm on CM12.1 nightly a old version
Is it only for 5.1? or will work on 5.1.1 ROMS too
Really want to try other ROMS with Networks tired of the stock roms
Related
hey guys please please help i had the custom rom pac nightly now here is where the sh*t went down, i tried to put on carbon and flashed the kernel with that and since then im unable to get back root i have locked the bootloader and tried unlocked the bootloader, the screen comes up to the point where the rom loads and the lil vibrate happens, and then pufff it just goes back to the boot up and then again and again !!! how can i fix this please help
Flash a boot.img with recovery and reflash.
Sent from my Z Ultra
LordManhattan said:
Flash a boot.img with recovery and reflash.
Sent from my Z Ultra
Click to expand...
Click to collapse
thanks buddy for the response but tried it and wont work !!!
Is your bootloader unlocked at the moment?
It should work as lordmanhattan said.
Flash boot.img from carbon
Flash carbon from recovery.
You could start over and flash new ftf then do the above instructions...
Sent from CarbonROM on my Z-Ultra
blueether said:
Is your bootloader unlocked at the moment?
It should work as lordmanhattan said.
Flash boot.img from carbon
Flash carbon from recovery.
You could start over and flash new ftf then do the above instructions...
Sent from CarbonROM on my Z-Ultra
Click to expand...
Click to collapse
yes bootloader is unlocked
sorry i know im being tedious but just to re check ...
1. flash ftf (my zu is from HK so the latest is .681 ftf)
2. then fash the boot.img from carbon
3. then flash carbon onto my phone
in this order you reckon it would fix my problem?
(going ahead and giving it a try anyways in the above order lets see if it pans out)
ashankanand said:
yes bootloader is unlocked
sorry i know im being tedious but just to re check ...
1. flash ftf (my zu is from HK so the latest is .681 ftf)
2. then fash the boot.img from carbon
3. then flash carbon onto my phone
in this order you reckon it would fix my problem?
(going ahead and giving it a try anyways in the above order lets see if it pans out)
Click to expand...
Click to collapse
As you seem to be having issues I would go back to stock and satrt again, and the steps above should do just that for you. I would boot up after the first step just to check that everything is upto speed on the phone.
I wouldn't worry about getting a HK firmware, just use any of the unbranded/generic US/EU 757 FTFs
I cant see why it didn't work straight from PAC , hell the kernel in Carbon boots the latest PAC just fine
blueether said:
As you seem to be having issues I would go back to stock and satrt again, and the steps above should do just that for you. I would boot up after the first step just to check that everything is upto speed on the phone.
I wouldn't worry about getting a HK firmware, just use any of the unbranded/generic US/EU 757 FTFs
I cant see why it didn't work straight from PAC , hell the kernel in Carbon boots the latest PAC just fine
Click to expand...
Click to collapse
ok bud tired it now the problem is the dam phone keeps going into recovery boots and gets stuck on sony and then reboots and goes into recovery any advice!!!
Flash a stock tft with flashtool in flashmode and it should work again.
Anyways flashing the kernel with the boot.img in fastboot mode should work.
Have tried that flashed the latest ftf. Then used the root guide didn't work used the boot.img from carbon from pac rom. Still just reboots , my issue is I want a custom rom cos I'm happier with a custom rom, so I get root on the stock. But I can't seem to load a custom rom, first it was midway boot now it's recovery reboots , I want a custom rom any advice .
Sent from my C6833 using XDA Free mobile app
ashankanand said:
Have tried that flashed the latest ftf. Then used the root guide didn't work used the boot.img from carbon from pac rom. Still just reboots , my issue is I want a custom rom cos I'm happier with a custom rom, so I get root on the stock. But I can't seem to load a custom rom, first it was midway boot now it's recovery reboots , I want a custom rom any advice .
Sent from my C6833 using XDA Free mobile app
Click to expand...
Click to collapse
Do it like this:
- flash boot.img (flashtool: fastboot mode)
- wipe cache/dalvik cache (CWM Recovery)
- flash the ROM[.zip] (CWM Recovery)
- flash the GAPPS[.zip] (CWM Recovery)
- reboot
That should work.
I mean flashed ftf , fastbooted boot.img from carbon, had recovery reboots (meaning the phone would boot up stuck on Sony logo and then reboot into recovery ) then tried pac rom boot.img no help, infact flashed ftf cleard cache and data and then flashed boot.img flashed rom , had same recovery issue, then tried a full wipe, (ofcourse flashed ftf again) I mean went into mount storage and formated cache data system etc etc, now I'm really baffeld I have tried everything I find myself getting everything to work except putting the custom rom someone help
Sent from my C6833 using XDA Free mobile app
ashankanand said:
I mean flashed ftf , fastbooted boot.img from carbon, had recovery reboots (meaning the phone would boot up stuck on Sony logo and then reboot into recovery ) then tried pac rom boot.img no help, infact flashed ftf cleard cache and data and then flashed boot.img flashed rom , had same recovery issue, then tried a full wipe, (ofcourse flashed ftf again) I mean went into mount storage and formated cache data system etc etc, now I'm really baffeld I have tried everything I find myself getting everything to work except putting the custom rom someone help
Sent from my C6833 using XDA Free mobile app
Click to expand...
Click to collapse
You forgot to flash the rom itself. Just flashing the kernel (boot.img) doesn't to anything instead of flashing
the kernel. You need to flash the ROM to have working Operation System. That's why just the logo shows
up and goes into recovery. Put the ROM (the .zip file of the rom) on your SD Card and go into recovery
and go to "install .zip" and choose your file. After that the ROM should be loading after Boot Logo. Don't forget
to flash the GAPPS after flashing rom.
Pacman Rom: www.blownco.com/index.php/doc_download/13688-pac-togari-4-3-build-1-20131214-044914
Pacman Gapps: www.blownco.com/index.php/doc_download/13604-gapps-jb-20130813-signed
here is an example for installing the rom and gapps:
https://www.youtube.com/watch?v=n0In32vjxIg&feature=player_embedded
Just do the same with your files.
Flashed the rom buddy , every time ofcourse I thought I didn't need to mention that hehe ,
Sent from my C6833 using XDA Free mobile app
ashankanand said:
Flashed the rom buddy , every time ofcourse I thought I didn't need to mention that hehe ,
Sent from my C6833 using XDA Free mobile app
Click to expand...
Click to collapse
I was wondering man. Can you provide us with a link of the rom you want to use.
tr0teK said:
I was wondering man. Can you provide us with a link of the rom you want to use.
Click to expand...
Click to collapse
carbon rom : http://forum.xda-developers.com/devdb/project/dl/?id=5119
Pac-rom : http://pacman.basketbuild.com/download.php?file=main/togari/nightly/pac_togari-nightly-20140505.zip
How to reproduce your error step by step ?
tr0teK said:
How to reproduce your error step by step ?
Click to expand...
Click to collapse
ok not so clear on what you are asking but here goes
had a c6802 cracked the screen (using carbon rom on it loved it) bought a c6833 wanted to try pac rom put it on realized my batt consumption is way too high so tried to switch back to carbon now, while doing so i flashed carbon rom Double tap to wake and carbon kernel, here started the spiral, first few hours couldn get any thing to work read up looked up a few of the forum, and ftf fashed the generic hk rom things got ok, but then root was the issue so found out the root method, fastboot .img and flash cmw supersu.zip, all fine and dandy didnt mess with it in anyway
since then as i have explained im gettin a recovery loop even when i flash the stock rom (cmw flash not ftf) so now i have the latest stock rom with root but i have sony's stock i want a rock in which i can add a menu button and change the dip and everything doesnt crash if you know what i mean....
ashankanand said:
ok not so clear on what you are asking but here goes
had a c6802 cracked the screen (using carbon rom on it loved it) bought a c6833 wanted to try pac rom put it on realized my batt consumption is way too high so tried to switch back to carbon now, while doing so i flashed carbon rom Double tap to wake and carbon kernel, here started the spiral, first few hours couldn get any thing to work read up looked up a few of the forum, and ftf fashed the generic hk rom things got ok, but then root was the issue so found out the root method, fastboot .img and flash cmw supersu.zip, all fine and dandy didnt mess with it in anyway
since then as i have explained im gettin a recovery loop even when i flash the stock rom (cmw flash not ftf) so now i have the latest stock rom with root but i have sony's stock i want a rock in which i can add a menu button and change the dip and everything doesnt crash if you know what i mean....
Click to expand...
Click to collapse
maybe the solution for you would be too install xposed framework which gives you the features you want. It allows your to "modify" your stock rom like the advanced power button menu, editing the navigation and status bar and stuff like that.
http://repo.xposed.info/module/de.robv.android.xposed.installer
you obviously need ROOT for this.
tr0teK said:
maybe the solution for you would be too install xposed framework which gives you the features you want. It allows your to "modify" your stock rom like the advanced power button menu, editing the navigation and status bar and stuff like that.
http://repo.xposed.info/module/de.robv.android.xposed.installer
you obviously need ROOT for this.
Click to expand...
Click to collapse
so yeah not to be a buzz killl buddy i know i am here asking for help and i really appreciate it but i tried that and gives me system ui errors cos i would have been ok with xposed but its not working great especially the special xposed for xperia cos the generic xposed is not workin anyway
ashankanand said:
so yeah not to be a buzz killl buddy i know i am here asking for help and i really appreciate it but i tried that and gives me system ui errors cos i would have been ok with xposed but its not working great especially the special xposed for xperia cos the generic xposed is not workin anyway
Click to expand...
Click to collapse
Which ROM do you have installed exactly ? In which country do you live ?
Hi, i'm new in these things so have a few questions.
Iwould like to flah thecyanogenmod but my galax 2s syas it is not a gt-I9100.
So i read some things about removing the assert line from a script and so on.
Do i need to flah an older rom before the cm11 nightly?
Do i need to flash the kernel first? or just use the latest cwm? (or rom manager/clockword?)
Can i reflash the S2 with an cyanogenmod kitkat version after i flashed it with an other kitkat rom for this device?
(still i did not succed to flash any rom to it)
thanks for any help !
JJSJJS said:
Hi, i'm new in these things so have a few questions.
Iwould like to flah thecyanogenmod but my galax 2s syas it is not a gt-I9100.
So i read some things about removing the assert line from a script and so on.
Do i need to flah an older rom before the cm11 nightly?
Do i need to flash the kernel first? or just use the latest cwm? (or rom manager/clockword?)
Can i reflash the S2 with an cyanogenmod kitkat version after i flashed it with an other kitkat rom for this device?
(still i did not succed to flash any rom to it)
thanks for any help !
Click to expand...
Click to collapse
First of all check if it g version or not.
To best of my understanding you can install it directly as far as you are rooted.
Sent from my GT-I9100 using xda premium
You don't need to flash an older version before KK. You just need KK compatible recovery. Or you can flash a KK compatible kernel, reboot to recovery and flash your KK rom.
Hello, thank you both for your replies.
Finally some clear answers
The model says GT-I9100 and not with g behind it, thanks.
I found some things about the status 7 error and about removing some line in a script in the zip.
So i will try the kitkat recovery (in my understanding this is also the kernel?) and then flash it with kitkat rom.
I would like to flash the one from cyangenmod, but doe it really mather which custom kitkat rom i take? At least they are all without the providers code like Vodafone or others?
Thanks again. I will update the thread if it succeeds or not.
Hi,
so i could not install the latest Recovery_CWM_6.0.4.7_I9100.zip as it gave an error E: signature verification failed.
then i tried recovery-clockwork-touch-5.8.1.5-galaxys2.zip and this works. But with this i can't install CM11. as i get the status 7 error.
So i will try some other versions kitkat compatible.
I also took a look at the kernels section but it is not clear wich one to use for CWM6 as i don't know what XXLSR or DDLS3 means, and which is correct for Netherlands.
Do you have any idea? (i am not allowed to post there yet)
Thanks for your help.
For choice of kernel -
1. Gustavo's - I don't remember the version. Check the op.
2. Dorimanx - you can try 10.43v100.
3. Apollo - 7.0b Cm
They will bring the KK compatible recovery you want on your phone. Then after rebooting to recovery you can flash any custom rom as they are not locked by any carriers.
banjara said:
For choice of kernel -
1. Gustavo's - I don't remember the version. Check the op.
2. Dorimanx - you can try 10.43v100.
3. Apollo - 7.0b Cm
They will bring the KK compatible recovery you want on your phone. Then after rebooting to recovery you can flash any custom rom as they are not locked by any carriers.
Click to expand...
Click to collapse
Thank you very much Banjara !
i'll keep trying, will report if i succeed
oh oh no good.....
JJSJJS said:
Thank you very much Banjara !
i'll keep trying, will report if i succeed
Click to expand...
Click to collapse
oh boy oh boy
i followed this http://forum.xda-developers.com/galaxy-s2/development/kernel-lazing-safe-stock-kernels-t2293576
and now it is stuck on boot screen, can't even reboot in recovery mode to get the back rom back pfffff
what should i do now......even the usb cable aint working, i'm flashing to the external sdcard via an other phone and the replace the sdcard to the galaxy s2
thanks for any help :crying::crying::crying::crying::crying:
JJSJJS said:
oh boy oh boy
i followed this http://forum.xda-developers.com/galaxy-s2/development/kernel-lazing-safe-stock-kernels-t2293576
and now it is stuck on boot screen, can't even reboot in recovery mode to get the back rom back pfffff
what should i do now......even the usb cable aint working, i'm flashing to the external sdcard via an other phone and the replace the sdcard to the galaxy s2
thanks for any help :crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
If you are able to go back to download mode
1. Flash a stock rom via odin
2. Flash a custom kernel via Odin. You might find some in the link you put there or you can search for hirox kernel. Remember, you have to download Odin flash able kernel and follow the op.
3. Once you have custom kernel, reboot to recovery. Flash any of the kernels in clockworkmod mentioned in my previous post.
4. Reboot to recovery. Flash your rom.
If you are unable to go to download mode try all the methods mentioned in the below link to bring it back to normal. It will need patience and perseverance. http://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Thank you for your patience and your help Banjara.
This forum and it's people are 100 times better the on Gyanomed were totally no support is given...
I will try it and come back, at least the phone able to start in the download mode.
Probably the usb connector has some loose contacts as i can get no contact with pc.
I got this phone from my brother and he told me that it never worked, just loading the battery
So i tried an other cable from an cheap android pad, but also no luck
maybe tommorow, i have another cable from an android stick pc at my job, maybe it will work
else i have to open it to check the connector under a microscope and probably resolder(hotair) it with a lot of flux... what a pitty... :crying:
lucky i have some experience on it, i repaired a lot of qtek phone, some years ago, always that connector broken.
I'm originally an tv(crt,lcd,plasma) repair technician, but now on an other job
Pfew, i managed to rsolder the connector with help of the microscope on my job.
I could even connect to odin. so that's is good progression. i had a wrong kernel downloaded, so it failed.
now i have the correct one and will use Siyah-s2-v6.0b5.tar
But unfortunately the battery is really emptying quickly when it stays in the phone, i don't know why.
So i will have to charge it an then give it another try with this kernel.
The ROM should still be original as i did not flash it before, just the kernel.
The phone is now saying battery empty, can't download.
To be continued...
Jippieeee!
GREAT !!!!
It worked! flashed the kernel Siyah-s2-6.0b5 and it started ! :victory:
Now what is the best way to proceed, there are so many topics on this it is overwhelming.
Should i first flash a Kernel or first a rom?
Can i flash them right after each other? (kernel reboots) so ROM and directly Kernel in one go?
thanks for your help!
{SOLVED}
Ok this is solved, thank you guys and dolls !
i managed to flash the cwm 6++++ and then the OMNI kitkat (latest) and the gAPPs
and it is working ! i am verry happy ! :laugh::laugh::laugh::laugh::laugh:
:thumbup::beer::beer:
one more thing
i noticed there is also another kernel now in the phone.
How to get rid of the yellow exclamation mark?
i saw some footage on youtube how to do it with the correct kernel.
But can i also extract the kernel from the ROM.tar i used and flash it with Odin?
Or is there another way?
thanks for your help. ---> edit
ok found some here: http://forum.xda-developers.com/galaxy-s2/orig-development/30-10-2012-k-la-lp-t1103399
but is it also good enough to unroot your device or are some functionality's then lost when using OMNI- rom ?
Thanks for your help
there arent any funcions lost it just gives your phone informations so that it thinks its all fine and dont displays the yelow horror . Btw i used TWRP KK kernel on my gs2 and installed prerooted rom aosp neatrom 5.8 kk and dont have problems with triangle. Also neatrom 4.1.2 with extended battery life is there if you dont like kitkat =D
Radelos said:
there arent any funcions lost it just gives your phone informations so that it thinks its all fine and dont displays the yelow horror . Btw i used TWRP KK kernel on my gs2 and installed prerooted rom aosp neatrom 5.8 kk and dont have problems with triangle. Also neatrom 4.1.2 with extended battery life is there if you dont like kitkat =D
Click to expand...
Click to collapse
Thanks Radelos, then i will try to unroot it again. And that will be it then.
Now using the OmniKK nightly of 8th of june, it runs very smooth, no issues till now, all is working well. :good:
btw idk what is the exact rom your willing to use but for no triangle would also do an clean install of stock rom, then root with framroot that you can find here on site and then flash KK compatible recovery and ofc kk rom with it. Here is the rom i used, its prerooted and on first boot starts direct into recovery so its for lazy ppl =D factory format data/system then flash TWRP touch recovery and in cwm reboot recovery option. And then just flash rom
Rom
http://uloz.to/x13p4YVr/drhd-base-lpq-re-light-tar
KK TWRP touch recovery
http://uloz.to/xyw9UkTk/kk-kernel-21-04-twrp-zip
Radelos said:
btw idk what is the exact rom your willing to use but for no triangle would also do an clean install of stock rom, then root with framroot that you can find here on site and then flash KK compatible recovery and ofc kk rom with it. Here is the rom i used, its prerooted and on first boot starts direct into recovery so its for lazy ppl =D factory format data/system then flash TWRP touch recovery and in cwm reboot recovery option. And then just flash rom
Rom
http://uloz.to/x13p4YVr/drhd-base-lpq-re-light-tar
KK TWRP touch recovery
http://uloz.to/xyw9UkTk/kk-kernel-21-04-twrp-zip
Click to expand...
Click to collapse
So with this process, will there be no yellow triangle?
Evervolv 4.1.2, brought to you by Optima Team
What is Evervolv?
We are an AOSP port aimed at Snapdragon powered devices.
Our rom includes all the basics:
Extended PowerMenu
Battery %,
Volume button music control.
Trackball Wake
Theme manager
Unique additions include:
sixbar signal strength
lockscreen styles
However our biggest feature is the ability to turn all that off with one switch in the toolbox, giving you 100% aosp look and feel.
We also do eng builds (instead of userdebug like everyone else) providing more open experience (ie adb root by default) and full complement of commandline tools (busybox, vim, ssh, curl/wet with ssl support!)
Bugs :
Flipped recents screenshot (need help fixing this)
Everything else should be fine.
Download :
Evervolv 4.1.2 FINAL [v1]
Screenshot :
Click here !
Installation Instruction :
V10 BASEBAND ONLY !
1.) Download the ROM .zip
2.) Go to recovery
3.) Wipe data & cache
4.) Install ROM .zip (also install v10Baseband zip if you haven't)
5.) Reboot
Great work!
L5 version comes soon!!
Sent from my Moto G XT1033 using Tapatalk
WOWW ...
GREAT ! thank you !
how to install this rom?
manhkhangkkn said:
how to install this rom?
Click to expand...
Click to collapse
By CWM ,like all others Custom roms
full wipe highly recomended ,in theory ...
manhkhangkkn said:
how to install this rom?
Click to expand...
Click to collapse
Just normal way to install a ROM :
1.) Download
2.) Go to recovery
3.) Flash the ROM zip
4.) Flash v10 Baseband
5.) Wipe data & cache
6.) Reboot
F4uzan said:
Just normal way to install a ROM :
1.) Download
2.) Go to recovery
3.) Flash the ROM zip
4.) Flash v10 Baseband
5.) Wipe data & cache
6.) Reboot
Click to expand...
Click to collapse
I try it but the phone say com.phone.android stoped, systemUI too. I flash F4kernel or phenom kernel but still don't work
:crying:
manhkhangkkn said:
I try it but the phone say com.phone.android stoped, systemUI too. I flash F4kernel or phenom kernel but still don't work
:crying:
Click to expand...
Click to collapse
Weird, I never encountered an issue like this before. I'll address it and try to fix it.
where can i find the features of this rom and screenshots ? i don't find them on internet (interresting presentation) ...
Boom,the next great rom by TEAM-OPTIMA!!!!Great work
GREETZ FROM TEAM-OPTIMA!!!
Anything you could ever ask for to update your i777 in one place. Download link below...
ROM: cm-12.1-20151213-UNOFFICIAL-i777.zip
Features
Compiled with UBER toolchain (supposedly faster than standard toolchain)
Outgoing call bug fixed (hacked, whatever, it's not there anymore)
TRIM support (thanks to Lanchon)
Otherwise unchanged
CM is awesome.
GAPPS: tk_gapps-modular-pico-5.1.1-20150913-signed.zip
Features
Works.
MODEM: I777UCMD8_modem.zip
Features
Nobody knows, but it's the latest version that I'm aware of.
RECOVERY: SGH-S959G_TWRP_v2.7.1.0.zip
WARNING
This is for the S959G (which I think is identical in every way to the i777). It works on the S959G but I have not tested it on an i777.
XPOSED
So good. Works fine.
You need to install the .zip in recovery, and the .apk normally.
Uninstall .zip included.
Download
Installation instructions can be found on CM's website.
* If upgrading from CM12.1, wipe /data/dalvik-cache first (you probably don't even need to wipe /cache).
* If upgrading from any other ROM, you need to factory reset first (ie. wipe /cache and /data).
Good luck!
XDA:DevDB Information
CyanogenMod 12 [UNOFFICIAL] [UBER] for i777 + Call Bugfix + Goodies, ROM for the AT&T Samsung Galaxy S II SGH-I777
Contributors
dimoochka, Lysergic Acid, Lanchon, razer_kain, rogersb11, cyril279, other amazing devs...
ROM OS Version: 5.1.x Lollipop
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-09-26
Last Updated 2015-11-29
Directions?
Install Directions?
(Like the order and which ones we need to install, also clean flash or dirty?)
coolerboyj said:
Install Directions?
(Like the order and which ones we need to install, also clean flash or dirty?)
Click to expand...
Click to collapse
1. ROM
2. Kernel & GAPPS & Xposed -> All optional, order doesn't matter.
Modem can be flashed at any time and does not overlap with any of the above flashes.
Probably clean flash for most purposes unless you're coming from prior version of CM12.1
dimoochka said:
1. ROM
2. Kernel & GAPPS & Xposed -> All optional, order doesn't matter.
Modem can be flashed at any time and does not overlap with any of the above flashes.
Probably clean flash for most purposes unless you're coming from prior version of CM12.1
Click to expand...
Click to collapse
Couldn't get the phone to detect my sim card / get data connection. Tried flashing modem file, but verification failed with the new CM recovery . Any solutions?
s_spiff said:
Couldn't get the phone to detect my sim card / get data connection. Tried flashing modem file, but verification failed with the new CM recovery . Any solutions?
Click to expand...
Click to collapse
What device? I777? Also clean or dirty flash? I'll try to work on the modem issue sometime next week.
Clean install. Coming from cyanide Lollipop. Had TWRP when I flashed the kernel. I tried both flashing kernel first followed by the ROM as well as ROM followed by kernel. Both had the same issue.
s_spiff said:
Clean install. Coming from cyanide Lollipop. Had TWRP when I flashed the kernel. I tried both flashing kernel first followed by the ROM as well as ROM followed by kernel. Both had the same issue.
Click to expand...
Click to collapse
I built a fully updated version (20151104) last night (see first post for download link). You no longer need to install Lanchon's kernel (TRIM support is built in).
I am installing this ROM on my own device (S959G) right now and testing it out.
Instructions:
1) Optional, if you want to try to flash the modem: install the version of TWRP you had initially, and try to flash the modem through that.
2) Install ROM.
3) Install GAPPS
4) Install XPOSED (if you want - make sure to re-download as the version is updated from v74 to v75).
OK. its been a while since i flashed a lollipop rom. so here i go. im currently running shostock3 v4.0 on my i777. if i flash a kitkat compatible recovery
( CWM-KitKatCompatible-i777.zip), i can flash this rom right? i'd do a full wipe, data,cache,system then flash rom>gapps>xposed....i should be good? right?
mmystere68 said:
OK. its been a while since i flashed a lollipop rom. so here i go. im currently running shostock3 v4.0 on my i777. if i flash a kitkat compatible recovery
( CWM-KitKatCompatible-i777.zip), i can flash this rom right? i'd do a full wipe, data,cache,system then flash rom>gapps>xposed....i should be good? right?
Click to expand...
Click to collapse
That's right. Not 100% sure about the recovery (I've never used that one), but I think you would be in good shape. Make a backup onto your computer first so that you have a contingency plan in case you soft brick.
If you're flashing on the i777, then I believe this ROM will replace your recovery with the stock CM12 recovery (just FYI - should be inconsequential).
dimoochka said:
That's right. Not 100% sure about the recovery (I've never used that one), but I think you would be in good shape. Make a backup onto your computer first so that you have a contingency plan in case you soft brick.
If you're flashing on the i777, then I believe this ROM will replace your recovery with the stock CM12 recovery (just FYI - should be inconsequential).
Click to expand...
Click to collapse
Haha...i always do a backup before flashing a rom...just made one in reserve. Download just finished...gonna try it out right now and test it. will post feedback later on...
UPDATE: flashed and booted up nicely.....but once i rebooted the phone, it stuck on samsung galaxy s2 logo with yellow triangle....
Update 2: i think xposed module messed up the system....did a data wipe and it boots up fine now.....need to setup everything all over again...hope i dont get that prob again....
mmystere68 said:
Haha...i always do a backup before flashing a rom...just made one in reserve. Download just finished...gonna try it out right now and test it. will post feedback later on...
UPDATE: flashed and booted up nicely.....but once i rebooted the phone, it stuck on samsung galaxy s2 logo with yellow triangle....
Update 2: i think xposed module messed up the system....did a data wipe and it boots up fine now.....need to setup everything all over again...hope i dont get that prob again....
Click to expand...
Click to collapse
Yeah I installed an older version of xposed (v74) in the past and it caused a bootloop. Using v75 with this nightly has been pretty stable for me.
New nightly uploaded to link in op.
dimoochka said:
New nightly uploaded to link in op.
Click to expand...
Click to collapse
I installed this new version in my s2 i777 but it failed
pepe100 said:
I installed this new version in my s2 i777 but it failed
Click to expand...
Click to collapse
What was the problem? I dirty flashed on mine from the prior version and it's been working fine. Maybe try clean flash?
dimoochka said:
What was the problem? I dirty flashed on mine from the prior version and it's been working fine. Maybe try clean flash?
Click to expand...
Click to collapse
It stuck in the cm screen I did a full wipe. I am going to try the next released when available. Thanks for develop for our device.
pepe100 said:
It stuck in the cm screen I did a full wipe. I am going to try the next released when available. Thanks for develop for our device.
Click to expand...
Click to collapse
New build and xposed uploaded. I installed it on my S959G last night and it works fine.
dimoochka said:
New build and xposed uploaded. I installed it on my S959G last night and it works fine.
Click to expand...
Click to collapse
Thanks bro
pepe100 said:
Thanks bro
Click to expand...
Click to collapse
New build uploaded (working fine on my S959G).
I'm stuck on the CM logo. Worse, I thought this came with TWRP. It comes with the CM recovery. I made a back up with TWRP and moved it to my computer prior to flashing. The CM recovery is worthless. Not sure where to start getting back to my old Rom (Omni 4.4.4).
Edit: Good to go and back on 4.4.4. I was hoping to move forward with this version. Not sure what happened. I used Odin to install the Siyah kernel with CWM and then was able to flash a Kernel with twrp to restore my back up.
I'm wondering if I had flashed a Kernel with TWRP at the beginning if it would have made a difference. I may try that now since I'll be looking at the triangle screen from now on anyway.
I do recommend that it be clear in the OP that the stock Kernel contains CM recovery and not TWRP.
Madcat8686 said:
I'm stuck on the CM logo. Worse, I thought this came with TWRP. It comes with the CM recovery. I made a back up with TWRP and moved it to my computer prior to flashing. The CM recovery is worthless. Not sure where to start getting back to my old Rom (Omni 4.4.4).
Edit: Good to go and back on 4.4.4. I was hoping to move forward with this version. Not sure what happened. I used Odin to install the Siyah kernel with CWM and then was able to flash a Kernel with twrp to restore my back up.
I'm wondering if I had flashed a Kernel with TWRP at the beginning if it would have made a difference. I may try that now since I'll be looking at the triangle screen from now on anyway.
I do recommend that it be clear in the OP that the stock Kernel contains CM recovery and not TWRP.
Click to expand...
Click to collapse
The bootloop is weird - did you inadvertently install an old version of Xposed (happened to me once)? Wipe data/cache/system and reflash - should do the trick.
I'll try to build a TWRP'ed version, shouldn't be too hard...
HI i am new to this thread and I have some serious issue with gapps for cm12.1 OK to my problem...
I successfully flashed cm12.1 nightly latest ver. and have downloaded gapps(arm,5.1,nano) I am using twrp recovery flashed my ROM and gapps successfully and after rebooting I get many errors com.gapps , play services and many more errors like that but whenever I flash my ROM without installing gapps it works fine(with no play sgoogle play services etc) plz help me I am in serious trouble... My phone is s4 non lte plz help
Sounds like you might be trying to use Open Gapps. The Official CM12.1 thread for your phone suggested the TK Gapps found here: http://forum.xda-developers.com/android/software/tk-gapps-t3116347 - Either mini or micro. They are a bit out dated, but they should work and you can just update once everything is set up.
Not working
Sorry friend it dosent work for me as i had already tried tk gapps and open gapps and pa today but i don know what the problem is just flashed the rom properly 12.1 cm nightly latest its not my first time though..
thx
maybe some one could seriously help me
Could be the recovery you are using. Are you wiping /system partition when reflashing CM + Gapps? You might also look into one of the optimized builds of CM, such as GearCM as well.
yes I am wiping dalvik and everything before flashing the gapps and rom and also I had seen many vids on YouTube regarding cm12.1 on s4 i9500 and downloaded from the YouTube link provided and follow the same procedure as they do but unfortunately I messed up don't know why.....
oh and one thing can you tell me is there any harm if I flash my phone multiple times... any storage disk issues.. like slowing and any ram issues??
i hope this help you:
download the latest cm12.1 for s4
and flash latest twrp recovery for this device
now go to google and search for "open gapps"
and select the open gapps project then
select "arm" and "5.1" and "pico" and download it
then go to device recovery and advanced wipe to system, cache, data and dalvik
and flash the cm first then flash the opengapps good luck
ASSAYYED said:
i hope this help you:
download the latest cm12.1 for s4
and flash latest twrp recovery for this device
now go to google and search for "open gapps"
and select the open gapps project then
select "arm" and "5.1" and "pico" and download it
then go to device recovery and advanced wipe to system, cache, data and dalvik
and flash the cm first then flash the opengapps good luck
Click to expand...
Click to collapse
ok ill try thx much but any harm flashing rom multiple times disk speed issues ram like?
xxxanmol said:
ok ill try thx much but any harm flashing rom multiple times disk speed issues ram like?
Click to expand...
Click to collapse
Don't worry flashing roms is very simple process it is only remove files and copy new files
if you flash a new rom even more than 1000 time your device will not be bricked
good luck
ASSAYYED said:
Don't worry flashing roms is very simple process it is only remove files and copy new files
if you flash a new rom even more than 1000 time your device will not be bricked
good luck
Click to expand...
Click to collapse
oh thx man but any slowing down disk issues?
xxxanmol said:
oh thx man but any slowing down disk issues?
Click to expand...
Click to collapse
As i said installing rom for android device doesn't effect on the device performance
and the never cause any slowing for disks except if the rom you installed was too bad this is another problem
however, don't worry if your device bricked or any else just power it off and boot to download mode then
flash the latest lolllipop 5.0 stock tar.md5 rom and every thing will be ok!
remember DON'T WORRY
ASSAYYED said:
As i said installing rom for android device doesn't effect on the device performance
and the never cause any slowing for disks except if the rom you installed was too bad this is another problem
however, don't worry if your device bricked or any else just power it off and boot to download mode then
flash the latest lolllipop 5.0 stock tar.md5 rom and every thing will be ok!
remember DON'T WORRY
Click to expand...
Click to collapse
thx buddy hope your suggestions will help me in future:good:
xxxanmol said:
thx buddy hope your suggestions will help me in future:good:
Click to expand...
Click to collapse
YOU WELCOME!!!!!!!
I had found the issue by my own it was that my twrp recovery was outdated and I just flashed it with new with flashify from play store to 2.8.0 and everything worked for me...:laugh:
xxxanmol said:
I had found the issue by my own it was that my twrp recovery was outdated and I just flashed it with new with flashify from play store to 2.8.0 and everything worked for me...:laugh:
Click to expand...
Click to collapse
I mentioned a possible recovery issue in post #4. Glad you resolved it though.