Cant get into recovery - Xperia Z2 Q&A, Help & Troubleshooting

I have a Xperia z2 6503 running the this rom:
http://forum.xda-developers.com/xpe...-paranoid-android-xperia-z2-peek-pie-t2839305
Previously i had a combination of this rom
http://forum.xda-developers.com/showthread.php?t=2755390
and this recovery
http://forum.xda-developers.com/showthread.php?t=2785598
Everything was working fine, but i wanted to switch so i flashed the rom i mentioned first through the recovery.
-When i tried to boot back to the recovery from android, i only get a black screen with an orange light.
-When i boot up the phone and press volume + or - at the pink light, i get a black screen with an orange light
-When i boot up the phone and wait for the green light, then hold volume + for 3 sec i get a black screen with the sony logo. And every touch nomatter where on the screen gives me a haptic feedback.
I have tried flashing multiple recoveries with and without a kernel, but i get the above results no matter what.
Since i havent posted enough i cant ask in the apropriate thread for the rom so im asking here.
Does anyone know a solution for this?
Does anyone know what firmware the Rom is based on?
Does anyone know what recovery/kernel is compatible with this rom?
Any help is greatly appriciated

sindre2104 said:
I have a Xperia z2 6503 running the this rom:
http://forum.xda-developers.com/xpe...-paranoid-android-xperia-z2-peek-pie-t2839305
Previously i had a combination of this rom
http://forum.xda-developers.com/showthread.php?t=2755390
and this recovery
http://forum.xda-developers.com/showthread.php?t=2785598
Everything was working fine, but i wanted to switch so i flashed the rom i mentioned first through the recovery.
-When i tried to boot back to the recovery from android, i only get a black screen with an orange light.
-When i boot up the phone and press volume + or - at the pink light, i get a black screen with an orange light
-When i boot up the phone and wait for the green light, then hold volume + for 3 sec i get a black screen with the sony logo. And every touch nomatter where on the screen gives me a haptic feedback.
I have tried flashing multiple recoveries with and without a kernel, but i get the above results no matter what.
Since i havent posted enough i cant ask in the apropriate thread for the rom so im asking here.
Does anyone know a solution for this?
Does anyone know what firmware the Rom is based on?
Does anyone know what recovery/kernel is compatible with this rom?
Any help is greatly appriciated
Click to expand...
Click to collapse
Not even with an app ?

Croize said:
Not even with an app ?
Click to expand...
Click to collapse
The only app i have tried using is the NDR Utils app.
It porduced the same results as trying to reboot to recovery from the power menu.
One more thing i forgot to mention.
I got into the thing were there is a sony logo and haptic feedback and just spammed the screen all over.
When i rebooted to android there was a screenshot of a recovery in a folder called screen_shots.
In the screenshot everything looked normal, and you could see that it had reacted to me spamming the screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

sindre2104 said:
The only app i have tried using is the NDR Utils app.
It porduced the same results as trying to reboot to recovery from the power menu.
One more thing i forgot to mention.
I got into the thing were there is a sony logo and haptic feedback and just spammed the screen all over.
When i rebooted to android there was a screenshot of a recovery in a folder called screen_shots.
In the screenshot everything looked normal, and you could see that it had reacted to me spamming the screen:
Click to expand...
Click to collapse
With your issue , i would flash the phone back and start from scratch.

Croize said:
With your issue , i would flash the phone back and start from scratch.
Click to expand...
Click to collapse
Is this worth a shot?
How to remove:
Delete the following files:
/system/bin/recovery.twrp.cpio.lzma (or .tar)
/system/bin/recovery.cwm.cpio.lzma (or .tar)
/system/bin/recovery.philz.cpio.lzma
/system/bin/charger
/system/bin/dualrecovery.sh
/system/bin/mr
Rename /system/bin/mr.stock to /system/bin/mr to restore stock functionality, then inside /system/bin/ rename chargemon.stock to chargemon check its permissions (should be 755 or otherwise visible as -rwxr-x-r-x). Done!
EDIT:
So i deleted the above files and flashed a new kernel with recovery, but it doesent seem to have changed anything.

sindre2104 said:
Is this worth a shot?
How to remove:
Delete the following files:
/system/bin/recovery.twrp.cpio.lzma (or .tar)
/system/bin/recovery.cwm.cpio.lzma (or .tar)
/system/bin/recovery.philz.cpio.lzma
/system/bin/charger
/system/bin/dualrecovery.sh
/system/bin/mr
Rename /system/bin/mr.stock to /system/bin/mr to restore stock functionality, then inside /system/bin/ rename chargemon.stock to chargemon check its permissions (should be 755 or otherwise visible as -rwxr-x-r-x). Done!
Click to expand...
Click to collapse
Im not wery experienced in this, In your case I woul flash back... Youll have to wait for someone more experienced, Sorry

Croize said:
Im not wery experienced in this, In your case I woul flash back... Youll have to wait for someone more experienced, Sorry
Click to expand...
Click to collapse
Think im going to wait with flashing back to stock...
Lets see if anyone more experienced can help me first ^^

For anyone with the same problem, I used an app called rashr.
Here is the Google+ comment section
https://plus.google.com/112479755295301683281/posts/SFTs2MFnnhs

Related

[Q] Please help with clear step-by-step: ClockWorkMod

I must be dumb, stupid, or something ... Now I want to frakking bang my head on the wall
For the life of me, I cannot boot back into ClockWorkMod to install the latest DJ_Steve ROM. I previously was able to flash my Streak, but now I can't anymore. Granted, I don't play with my Streak as much as with my Captivate, but still, I should remember how to do this.
Here is what I do:
I open CWM
I click on Flash CWM Recovery
I wait for the "success" message
Then I click on Reboot into Recovery
Nothing happens... I power down and boot back normally
I've also tried this:
I open CWM
I click on Flash CWM Recovery
I wait for the "success" message
Then I click on "Install ROM from SD Card"
I navigate and choose my update.zip file; click Yes, Yes, etc.
Nothing happens. I power down and boot back normally
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AAARRRRRGGHHHHHHHH!!!!!!!!!!!!
Now I've tried the above by holding, after step 4, the Power and Camera buttons, the Power and Volume Up/Down button, Power and Vol. Down, Power and Vol. Up, etc. You get the idea ...
I either end up into the white menu for Fastboot, or end up into (what I think is) the stock recovery. There I choose "Install Update from SD Card" and then the phone waits forever at the "Detect SD" menu.
What is it that I should do? can someone please either shoot me or post some kind of detailed step-by-step, as if explained to a five year old
Thanks in advance!
PS:
Android 2.2
Baseband A131800-US
Kernel 2.6.32.9-DJ_Steve-BFS-BFQ-OC-Vol
Froyo V1.5.3 by DJ_Steve
I actually never could get ClockWorkMod to work on my streak no matter which version I picked. I got just as frustrated as you as I followed all of the given instructions and could never boot into CWM.
My suggestion (and the workaround I used) was to use fastboot and install StreakMod in the development section. It works 100% of the time for me and without any headaches.
With cwm I couldn't make a nandroid. Streakmod is the way to go.
Sent from my Dell Streak
Hellzya said:
With cwm I couldn't make a nandroid. Streakmod is the way to go.
Click to expand...
Click to collapse
I made it work at least a couple of times before.... Weird.....
duckydan said:
I actually never could get ClockWorkMod to work on my streak no matter which version I picked. I got just as frustrated as you as I followed all of the given instructions and could never boot into CWM.
My suggestion (and the workaround I used) was to use fastboot and install StreakMod in the development section. It works 100% of the time for me and without any headaches.
Click to expand...
Click to collapse
My problem is, I run Windows as a VM inside a Mac (using Fusion) so I tried installing the Fastboot drivers and the rest, but I can't make it work reliably. It's like the drivers don't like being in a VM or something, each time I want to communicate with the Streak I have to reinstall everything.
So I tried installing StreakMod, and that also failed. Is there, somewhere in a post, the exact way to install StreakMod? Maybe I can make it work on someone else's PC...
I thoght there was a fastboot for MAC. If so, can you use it to push the recovery?
alperin1 said:
I thoght there was a fastboot for MAC. If so, can you use it to push the recovery?
Click to expand...
Click to collapse
I'll try finding it, now that I think about it, yes I read that somewhere!
alperin1 said:
I thoght there was a fastboot for MAC. If so, can you use it to push the recovery?
Click to expand...
Click to collapse
The android sdk has a version of fastboot I believe.
Edit: I DLed the mac version and do not see fastboot there. I found a mac version on this page, but I have no idea if it will work with the Streak.

[Stuck] can't go anywhere

Hey i just installed the new build of CM9 01262012.
I installed it and then i wanted to install the google apps with rom manager.
After that the phone started and i needed to click on the android logo for the setup wizard, after i pressed that the setup wizard crashed each time.
Now i am stuck at the boot if i wanna boot my phone i won't get further then the Samsung Galaxy SII GT-I9100 screen with the yellow triangle.
When i got into the boot mode (power + volume down) it says downloading... do not turn off the phone. i waited untill it finishes but it is stuck on this screen also.
I can't boot at all and also not on the boot mode.
What can i do to fix this plz help me i'm quite a noob with android
I tried volume up + power now i am doing a new recovery from a zip file. hopefully this works it says install from sdcard complete.
yes it worked out i got CM9 running again now check if i can install the google apps manualy
xeoMe said:
Hey i just installed the new build of CM9 01262012.
I installed it and then i wanted to install the google apps with rom manager.
After that the phone started and i needed to click on the android logo for the setup wizard, after i pressed that the setup wizard crashed each time.
Now i am stuck at the boot if i wanna boot my phone i won't get further then the Samsung Galaxy SII GT-I9100 screen with the yellow triangle.
BOOT LOOP
http://forum.xda-developers.com/showthread.php?t=1108499
When i got into the boot mode (power + volume down) it says downloading... do not turn off the phone. i waited untill it finishes but it is stuck on this screen also.
I can't boot at all and also not on the boot mode.
You tried actually understanding the basics before flashing ???
Downloading mode is part of flashing stock roms have you connected ODIN ???
jje
Click to expand...
Click to collapse
I have no boot loop anymore, i know it's not the right topic or section but i have cyanogemod 9 running now but i don't have the google apps or any folder app where i can browse to my sd card to install the google apps, how can i fix this??
the apps i have and what are probally usefull are (Dev Tools, ROM Manager, Superuser)
i can't browse to my sd so cannot install market or other things (
xeoMe said:
I have no boot loop anymore, i know it's not the right topic or section but i have cyanogemod 9 running now but i don't have the google apps or any folder app where i can browse to my sd card to install the google apps, how can i fix this??
the apps i have and what are probally usefull are (Dev Tools, ROM Manager, Superuser)
i can't browse to my sd so cannot install market or other things (
Click to expand...
Click to collapse
Probably not the right topic, but my answer isn't based on fact and/or experience with CM9 - for good reasons, I don't do betas, ever - so we're quits...
Haven't read your post history, but you seem to be yet another new guy who is flashing an unstable beta ROM without previous experience and/or knowledge.
I can't for the life of me understand why inexperienced people do this. Presume there's some overriding urge to have The NextBigThingCoolLolzz on the phone...
DON'T!!!.
Read every sticky here, read every FAQ. If you think you understand - you don't. Read, read and read again.
Think you've got it it? You haven't. Read some more.
Then - and only then - try and flash a 2.3.6, never an ICS. If that goes well, read and read and read.
Then you're ready to take the consequences of flashing beta buggy ROMs (and that's what they are - could use stronger terminology, but I respect the devs..), and you can't say you haven't done your research etc.
Nothing personal. You're just diving into the deep end with lead-filled boots. Never going to end well, yes?
xeoMe said:
i have cyanogemod 9 running now but i don't have the google apps or any folder app where i can browse to my sd card to install the google apps, how can i fix this??
Click to expand...
Click to collapse
I'm honestly lost for words.
I really want to post insults and images, but none of them would be good enough . Just ... wow.
xeoMe said:
I have no boot loop anymore, i know it's not the right topic or section but i have cyanogemod 9 running now but i don't have the google apps or any folder app where i can browse to my sd card to install the google apps, how can i fix this??
the apps i have and what are probally usefull are (Dev Tools, ROM Manager, Superuser)
i can't browse to my sd so cannot install market or other things (
Click to expand...
Click to collapse
Flash back to stock. You clearly have no business flashing such an immature ROM, because you are apparently not equipped to deal with any issues that arise from using it.
Only used this once, but I now feel the need to bookmark it...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
B3311 said:
Sensitive soul, aren't you...
Do your best. I don't get too worried by keyboard hardmen.
Click to expand...
Click to collapse
It was aimed at the OP, not your reply!
oinkylicious said:
It was aimed at the OP, not your reply!
Click to expand...
Click to collapse
Got that, my quick edit wasn't quick enough Sorry.
I got the same issue
Ixdankd said:
I got the same issue
Click to expand...
Click to collapse
You should probably flash back to stock too, then.
Sent from my GT-I9100 using XDA App

No internet, no work. Really need help.

OK. So i started with a Galaxy S4 Verizon 4.4.2 (bought refurbished, no sim, not activated).
As soon as i put the sim in at verizon store and started using phone all was good. I immediately root the phone w Towelroot. Use Safestrap and flash the Hyperdrive Rom. Excellent. In my exitment i try the Super6 Rom. Iam now at
Android 5.0.2
baseband i545vrugoc1
kernal 3.4.0-4584173
build gogolies super6-.i545vrugoc1
I can make and receive calls but have no internet and no texting
I cant work until this is fixed. Is ther any hope for me?
I now have the triangle and can not boot the phone
bbiigg said:
OK. So i started with a Galaxy S4 Verizon 4.4.2 (bought refurbished, no sim, not activated).
As soon as i put the sim in at verizon store and started using phone all was good. I immediately root the phone w Towelroot. Use Safestrap and flash the Hyperdrive Rom. Excellent. In my exitment i try the Super6 Rom. Iam now at
Android 5.0.2
baseband i545vrugoc1
kernal 3.4.0-4584173
build gogolies super6-.i545vrugoc1
I can make and receive calls but have no internet and no texting
I cant work until this is fixed. Is ther any hope for me?
Click to expand...
Click to collapse
Download Kies and update, but if it doesn't work or you want to have the ability to keep flashing roms(will wipe data):
1)Download and unzip odin
3)Turn off you s4
4)Hold the power, home and Volume down keys if you boot into something like the picture continue or try again
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5)Use you volume keys to press continue
6)Download the .tar from this forum(odexed or deodexed try both) or if the link doesn't work search xda for sch-i545 OF1 tar
7)Right click odin and run as administrator
DO NOT CHANGE ANYTHING IN THE PIT AND OPTIONS Section
8)Check the AP button(PDA in some versions of Odin)
9)Press the AP/PDA button and find the rom that you downloaded
Look at this image for reference, you should have something where each of the arrows point.
10)Press start(not liable for anything this may cause)
11) See if it works!
Didnt work. whatever i did a lil while ago with odin messed it up and now i have the yellow triangle and the phone wont turn off or go into os
bbiigg said:
Didnt work. whatever i did a lil while ago with odin messed it up and now i have the yellow triangle and the phone wont turn off or go into os
Click to expand...
Click to collapse
Have you tried pressing volume up when at that screen? Or just pull the battery to turn off.
whowatchlist said:
Have you tried pressing volume up when at that screen? Or just pull the battery to turn off.
Click to expand...
Click to collapse
I can take the battery out to shut it off but as soon as the bettery goes in it turnes on automatically. I can only go into download mode and connect to odin and thats it.
bbiigg said:
I can take the battery out to shut it off but as soon as the bettery goes in it turnes on automatically. I can only go into download mode and connect to odin and thats it.
Click to expand...
Click to collapse
Can you send a screenshot of your computer when on Odin and a picture of your phone? It would really help.
not sure how to do that. My tablet took some terrible pics.
Well i now have a different screen now that says " Samsung Custom" and it just staays there.
However! If i do volume up,power,home and wait a sec for first vibration and immediately let go of power button while holding volume up and home key i get my upper left hand corner booting menu. I can see my backups on the ex sd and a hyper ro zip file but i cant flash them. it shows something in each backup "data.ext.win000.md5 and 001.md5" as well as "system.ext4. same endings" but cant flash them. I get a failed to mount error.
in the upper left hand corner in red it says
Android System Recovery<3>
KOT49H.I545VRUFNC5
Choose a package to install:
/sdcard
ansd then a boot menu. Is this a good sign?

Help! I just unbricked my Le Max 2, it reboots with the screen splitted into two.

Help! I just unbricked my Le Max 2, it reboots with the screen splitted into two, the left half on the right and the right half on the left. Please can anyone kindly help?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

			
				
after unbrick.
I use FlashOne 1.9 and a QFIL rom to unbrick it.
unbrick it again.
AhmadSant said:
unbrick it again.
Click to expand...
Click to collapse
re-unbricked, same result.
ok, can you do firstly reset factory, then try to install another rom.
AhmadSant said:
ok, can you do firstly reset factory, then try to install another rom.
Click to expand...
Click to collapse
factory reset and flashed another rom via fasboot, but reboot stuck at the start screen, just like the left one on the photo I submitted.
Do another unbricking, and everything back to the state I reported.
It's confirmed to be a hardware problem, when the monitor is replaced, everything back to normal.
I think there is problem with build.prop .. try google ... To restore build.prop
It seems that the Kernel is also affected so it must be hardware problem
hi did you solve this?
I have the same problem
KM141 said:
Click to expand...
Click to collapse
Hi, I have exactly the same problem after following the tutorial in here to get rid of the vendor encrypted god damn rom. Everything was working right before it so I don't buy the hardware issue. After flashing using flashone 2.0 I did ended up with my screen like this.
I tried several qfill file from severals sources and always the same result. I even try to go on and flash TWRP and RR rom but screen stay that way.
Please, I'm seriously desperate right now... I need your help guys and looks like i'm not the only one.
KM141 said:
Click to expand...
Click to collapse
Bambulbizarre said:
Hi, I have exactly the same problem after following the tutorial in here to get rid of the vendor encrypted god damn rom. Everything was working right before it so I don't buy the hardware issue. After flashing using flashone 2.0 I did ended up with my screen like this.
I tried several qfill file from severals sources and always the same result. I even try to go on and flash TWRP and RR rom but screen stay that way.
Please, I'm seriously desperate right now... I need your help guys and looks like i'm not the only one.
Click to expand...
Click to collapse
It was solved without replacing the screen!
Ok so, I did as shown in the topic : https://forum.xda-developers.com/le-max-2/help/flash-eui-rom-fastboot-t3525831
download twrp (The one I know didn't had the touchscreen issue)
boot from twrp (wish I had know about it before!) and not from one installed
upload zip file to /sdcard ( here's the catch, while in TWRP in don't have access to adb, the phone doesn't connect to pc or I don't know even I mount it, could be me. So i just put the archive at the root of the phone before booting to twrp from adb)
install rom
reboot
And ... it's ****ING WORKING!*​​​​​​​
Really big thanks to ThE_MarD for his help!
For complete version :
https://forum.xda-developers.com/showpost.php?p=74890577&postcount=138
Bambulbizarre said:
It was solved without replacing the screen!
Ok so, I did as shown in the topic : https://forum.xda-developers.com/le-max-2/help/flash-eui-rom-fastboot-t3525831
download twrp (The one I know didn't had the touchscreen issue)
boot from twrp (wish I had know about it before!) and not from one installed
upload zip file to /sdcard ( here's the catch, while in TWRP in don't have access to adb, the phone doesn't connect to pc or I don't know even I mount it, could be me. So i just put the archive at the root of the phone before booting to twrp from adb)
install rom
reboot
And ... it's ****ING WORKING!*​​​​​​​
Really big thanks to ThE_MarD for his help!
For complete version :
https://forum.xda-developers.com/showpost.php?p=74890577&postcount=138
Click to expand...
Click to collapse
To put a file on the phone while in twrp just use adb push
KuranKaname said:
To put a file on the phone while in twrp just use adb push
Click to expand...
Click to collapse
That's what I tried but as stated in the last link, I had no connection to adb while in twrp after cleaning up.
Anyway that's settled for me, it's mor for other that have encountered this as well. Replacing screen is not the only way.

Start Error in Pixel Experince, by Boot.img flashed by Fastboot (phone almost brick).

Hello friends, I hope you are well. I am writing to everyone to see if anyone can help me with this big problem.
Yesterday install the Rom Pixel Experience, all good, all the steps to perfection and others, had microSD at that time so flash the boot.img by Fastboot. It seems to install the Boot.img in the Recovery TWRP partition, or something like that. Because I do not have the Recovery either, when I try to go to the recovery, the window "Bootloader Unlocked" appears, but it does not take me anywhere, only to the boot of the rom, it is something very strange and the truth scares me. I clarify: I can not access the Fastboot, nor the download mode, nor the recovery, because it does not.
There will be another way: ????
PLEASE IF SOMEONE CAN HELP ME, FIND ANOTHER METHOD TO ENTER THE FASTBOOT OR DOWNLOAD MODE, THE SOLUTION THAT WORKS WILL PAY ME WELL TO THE PROPONGA, PLEASE, I DO NOT WANT TO LOSE MY MOBILE, I BUY IT WITH A LOT OF EFFORT.
Last night I dawned on the boot logo, until it was completely downloaded and at this moment it continues to do so ... By GOD!
When trying to enter the Fastboot or download mode, it takes me here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Image extracted from: https://www.tomshw.it
Then he starts loading the rom and stays there all the time .:
Image extracted from: https://www.tomshw.it
I can not access Fastboot, nor download mode, nor recovery, because it has disappeared. There will be another way to enter the Fastboot or download mode, because the phone actually woke up until I wake up today and was even charged. PLEASE.
Hey, sorry for your sad state. Following process worked for me when I got stuck yesterday like that.
1. Connect your phone to PC ( make sure adb/fast boot is setup)
2. Hard reboot your phone with power plus volume down button.
3. As soon as your phone turns off, press volume down only and keep it pressed till you enter fastboot.
4. After this phone should be recognised in PC and you should be able to boot in TWRP using fastboot.
ZestyManu said:
Hey, sorry for your sad state. Following process worked for me when I got stuck yesterday like that.
1. Connect your phone to PC ( make sure adb/fast boot is setup)
2. Hard reboot your phone with power plus volume down button.
3. As soon as your phone turns off, press volume down only and keep it pressed till you enter fastboot.
4. After this phone should be recognised in PC and you should be able to boot in TWRP using fastboot.
Click to expand...
Click to collapse
Hope this works for you @Yeriorlando. @gimpy1 had a similar issue when installing Havoc ROM. Part of the problem seems to be when installing the custom kernel?
gimpy1 said:
It was operator error (generally is) on my part, I'm sure. The only thing I did different that I can remember is installing the 9.0 boot image in twrp differently. I installed it in the recovery option first (intentionally, should not have), instead of ticking only the boot choice. I did not untick the recovery option (should have never ticked it in the first place, but I was trying to correct a problem on the ROM, and misread a post).
Click to expand...
Click to collapse
He was able to reinstall TWRP using fastboot.
gimpy1 said:
Thx, Chaz. I pulled out my printed instructions from your post, and once I was able to get my device recognized (that did take a couple of tries), reinstalling twrp was pretty easy.
I'm back in business thanks to you.:good:
Click to expand...
Click to collapse
IF you still can't after the suggestion at top, maybe @SGCMarkus or @runningnak3d have some tips?
Unless you have an H932, then if you get the error that: "Your device software can't be checked for corruption" then you have fastboot. It is literally impossible to have that message on a WTF rooted phone and NOT have working fastboot.
So, as @ZestyManu said -- make *sure* your phone is powered off. If you have to let, the battery die. Then hold vol down + plug in the USB cable (no need to touch the power button) and you will enter fastboot.
-- Brian
Thank you all. I have solved the problem in a super crazy way, to pure ADB, not fastboot .... Pure ****ing adb ... Hehehehe. Thanks to @ChazzMatt

Categories

Resources