I tried many custom roms (kitkat) on my S2 i9100 but every time I try to set focus while using camera it works OK for 1-2 pictures after that focus doesnt work every time I have to close the camera app and turn it on again
It was not happening earlier to kitkat
My question is still the camera issue is not fully solved or does this happen to old devices like mine?
i had a similar issue a clean stock flash solved it try if you can get the partition table flashed again too :good:
sorry am new in this custom rom things, wht do u mean by "partion table flashed again" also after that will it work with non-stock rom like CM11 or PA 4.6 etc... on stock base roms like fusion/wizz which are 4.4.2, camera is working fine
Sent from my GT-I9100 using XDA Premium 4 mobile app
Related
I have used nearly all AOSP and AOKP Roms and i haven't managed to make the camera work flawlessly. I have searched all over xda (and Internet) and tried various "solutions".
Camera app does not work at all with stock AOSP kernels but it works (this is very weird) with custom kernels like siyah and yank. Problem is that it still force closes all the time, especially with the flash enabled. My cam firmware is "ZD.. "
Any help is greatly appreciated!
Edit: I have only managed to have a nearly perfect camera experience with N. E. A. R. Aosp Rom and I am very curious what did the developer do.
the latest jellybam has zero issues with cam:
http://forum.xda-developers.com/showthread.php?t=2159087
eytan123 said:
the latest jellybam has zero issues with cam:
http://forum.xda-developers.com/showthread.php?t=2159087
Click to expand...
Click to collapse
I will try it, thank you. Is there an external mod or camera apk that fixes the camera or is it just about the tweaks each dev puts into his Rom?
I ask because I love SlimBean and I don't want to change it!
nope, i don't know about a mod for this.
i tried a lot of things including matching and updating the cam firmware with stock rom.
tried different app's, kernels but always had this problem.
*could be that it fixed cause it's based on 4.2.2 can't tell for sure.
eytan123 said:
nope, i don't know about a mod for this.
i tried a lot of things including matching and updating the cam firmware with stock rom.
tried different app's, kernels but always had this problem.
*could be that it fixed cause it's based on 4.2.2 can't tell for sure.
Click to expand...
Click to collapse
Camera doesn't work for me in latest Jellybam. It still FCs unfortunately.
that's odd.
try to run this cam:
http://forum.xda-developers.com/showthread.php?t=1746611
make sure that your cam firmware is correct
Hey,
I have a big problem:
I have brought the Galaxy S3 i9300 one week ago. I really don't like the stock rom so I rooted and flashed cm10.1. I really like stock vanilla Android. Everything works really smooth and stable. But when I try to launch the camera is appears this error: Camera error and under this: Can't connect to the camera. (Look at Attachments) I really need a camera and this is just
First I was thinking it was Cm but then I flashed other Roms (Supernexus, Paranoid, ...) and everytime the same. Only in Xperian Ze and Omega Rom the camera works but on those roms its the stock camera. I also tried to install a third party cam.app.
So now I don't know what to do. Is this only on my S3 or is it on someone elses.
And is there any way so flash the stock camera app or to fix this bug.
This is a well known problem.
I would recommend you start here first:
http://forum.xda-developers.com/showthread.php?t=2006128
Some users had improvements after aligning Cam FW Ver and Phone FW Ver.
degiovab said:
This is a well known problem.
I would recommend you start here first:
http://forum.xda-developers.com/showthread.php?t=2006128
Some users had improvements after aligning Cam FW Ver and Phone FW Ver.
Click to expand...
Click to collapse
Hey, thanks. Did I have to do *#34971539# in Stock or in CM.
Damdidosch said:
Hey, thanks. Did I have to do *#34971539# in Stock or in CM.
Click to expand...
Click to collapse
You have to enter the code in a Samsung stock rom. It does not work in CM.
P.S. Hit the "Thanks" button if I was of any help...
degiovab said:
You have to enter the code in a Samsung stock rom. It does not work in CM.
P.S. Hit the "Thanks" button if I was of any help...
Click to expand...
Click to collapse
Ok when I do that I have FM version that aren't supported in the post. What now?
Damdidosch said:
Ok when I do that I have FM version that aren't supported in the post. What now?
Click to expand...
Click to collapse
That's very odd.
The post contains pretty much all known camera firmwares for SGS3!
If I was you I would try and google "i9300 camera firmware XXYYNN" with the code you have and see if anybody else got the same.
degiovab said:
That's very odd.
The post contains pretty much all known camera firmwares for SGS3!
If I was you I would try and google "i9300 camera firmware XXYYNN" with the code you have and see if anybody else got the same.
Click to expand...
Click to collapse
Found and Done but camera still doesn't work -,-
Damdidosch said:
Found and Done but camera still doesn't work -,-
Click to expand...
Click to collapse
If it is of any consolation, I get also random FCs and I have aligned my firmware (ZDFI02)
degiovab said:
If it is of any consolation, I get also random FCs and I have aligned my firmware (ZDFI02)
Click to expand...
Click to collapse
Now the stock camera doesn't work too.
Is it possible to get the stock back?
flash the camera firmware that you had previously
Glebun said:
flash the camera firmware that you had previously
Click to expand...
Click to collapse
But I can't find it.
I flashed a different.
In Attachments is my default. But this I can't find in the whole internet.
I'm so stupid
i have the same problem here please help me
Hi there,
i have the same problem like you guys, my camera doesn't work even if my phone is rooted or not, even if it's running with and original firmware or with a rom. i tried all your methods, but still nothing. now i'm running Sotmax Ultimate Stock V20 B4 XXUFME3 ROM, android 4.2.2 and i can't figure it out. what rom should i install? AOKP, AOSP?
Thanks!
QUOTE=omar5885soman;41338928]i have the same problem here please help me[/QUOTE]
i9300 camera is a nightmare
I've run various custom roms on my original Galaxy S, an SII and now an SIII and I have never had as much frustration with any of them as I have had with the S3 camera. Like the original poster, I prefer AOSP over Samsung firmware. Even if you replace touchwiz with a different launcher it seems clunkier and less responsive than a pure Google rom. AOKP is my favourite, it's just got all my favourite features. But I've come to the conclusion that Samsung know best how to drive Samsung firmware. As much as I love AOKP when they declare a rom version "stable" or a "milestone" this is the status of the rom before it is grafted onto specific devices, which means hardware and driver issues can still arise.
All of which means if you want all your hardware to work go for a rom built on Samsung firmware. Omega rom is pretty good, but not perfect. It always starts out good for me and then gets laggy. And then I want to try AOKP again. And I do. And the camera is still crud... and so the infinite loop begins again.
use camera jb+
Camera failed
camera not working
error : camera failed
thnaks all :good:
Hi
I want to try some custom rom. Without any bugs.
Dont care about the radio bug.
Or tv out bug.
Camera bug should not be present.
Currently I am using wanam latest jellybean rom. V6.2
I have tries omega roms also.
Tries cm9 too. I like cm9 rom but I was not able to get wifi working.
To get wifi working I had to install ics and then flash cm9.
I want to try something like cm10
Pure android feeling. Not the samsung stock rom. And battery friendly.
Cm10 bugs webpage is not opening. Showing error all the time.
Sent from my GT-I9300 using xda premium
i would highly recommend slimbean rom http://forum.xda-developers.com/showthread.php?t=2106471
next time just type in "AOSP" in search box and that should give you wanted result
Kapiljhajhria said:
Hi
I want to try some custom rom. Without any bugs.
Dont care about the radio bug.
Or tv out bug.
Camera bug should not be present.
Currently I am using wanam latest jellybean rom. V6.2
I have tries omega roms also.
Tries cm9 too. I like cm9 rom but I was not able to get wifi working.
To get wifi working I had to install ics and then flash cm9.
I want to try something like cm10
Pure android feeling. Not the samsung stock rom. And battery friendly.
Cm10 bugs webpage is not opening. Showing error all the time.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
As per the rules what rom best rom posts are not allowed .
jje
See here
Hi,
I tried using the subject ROM with Achotjan's Kernel for CM 7.2.
Everything is normal, except the resolution. I dont know how to put it but the image doesnt cover up the entire screen. Its as is everything has been bundled up leaving a part of the screen unavailable for placing icons or anything.
Has anyone faced any issues with this configuration I am using?
I wish I could provide a screen to show what the issue is. Pls tell me if you need more explanation.
flash the ROM again, wipe all data. if this doesnt solve the issue, try another kernel
Sent from my ADR6425LVW using xda premium
While the mm team's cm7.2 rom is a good functional rom it still has the video recording glitch as all gb fxp based roms have however zdizhu cm 7 is fully functional
http://forum.xda-developers.com/showthread.php?t=1213843
It runs flawlessly without the issues of fxp based roms
Sent from my Google Nexus S
I really dont know how did this happen. Like, everytime i flash my phone (Xperia P) with CM9 or MIUI Roms, i got Camera Error (can't connect to the camera) but in stock or stock based custom roms, it is working pretty well. Can anybody please help me with this?
Installed FXPs 214 release and have the error. So i reflashed to Stock .54 ROM and the camera is working, then now i just finished installing Enigma 2.0 ROM, and still the camera is still working. What seem to be the problem? I desperately need your help.
a little up
Locked or unlocked bootloader ?
Im on unlocked bootloader. im using stock rom right now, and its working good. but every time i flash fxp or miui. its has error. i really like the feel of fxp, pls help.
You install the kernel (boot.img) included in the zip right?
yes. i always do that every time i flash FXPs as instructed. I also tried installing custom stock based roms and the camera is working good. just cm9 based roms CM9 and miui.
edit:
Also i can't use the torch app on cm9 too it FCs
Plz mate be clear..
What camera bug u r facing..
Becoz i never have such a problem...
Cera only lags for first time as u open it..
Wait then a msg will come app not responding wait or fc...
Choose either wait or fc and restart and ur lag is gone...
Of sum other problem ask me...
Sent from my Xperia U using xda premium