I have seen many Thread about I9000 trying to convert T959 modem to use the T-mobile network. What i couldn't find is from T959 to I9000 to make it to the international version.
I have the T-Mobile Vibrant T-959 unlocked with ECLAIR. I know that the network band of this phone is 850/900/1800/1900. i found the result according to Samsung website. I know in another post it was said that it is hardware issue but the hardware is 850/900/1800/1900.
I live in the United Arab Emirates and the network band here is 900/1800 similar to the European or Asian Network. but the T-mobile uses 850/1900 so i couldn't get 3G or any kind of internet connection here, unless i find a WiFi connection. I need the 3G connection on the move.
I want to know is there any way to change the the modem band to I9000? so that i can use a custom rom like Darky which is Stable according to many users.
I would never be using the phone on US T-mobile or any Network in the US.
You might think this Question is redundant and has already been answered but i search every where but it comes back empty.
Your feedback would be highly Appreciated!!!!
I don't think you can actually change your phone's bands.
However, an unlocked US T-Mobile Vibrant should be working on 3G. According to Wikipedia, the two 3G networks in UAE (du and Etisalat?) use the 2100MHz band, which should be supported.
Thanks for the reply, i tried everything but nothing worked.
One more question to ask, what will happen if i flash i9000 rom and radio on a T-mobile phone. Or should i just flash it with a T-mobile rom without changing the radio, and if the sim gets locked I will just unlock?
this is the final question to ask.
Don't know if this helps but I use my unlocked vibrant in the uk, so if European bands are the same...it should work.
You can change roms and I would recommend you should but you can't use an i9000 modem.
Do you have a Sim with a data plan?
Can you text or make calls?
pvspencer22 said:
You can change roms and I would recommend you should but you can't use an i9000 modem.
Do you have a Sim with a data plan?
Can you text or make calls?
Click to expand...
Click to collapse
Yes i can make a calls and send Text but no internet connection. I just bought data plan for my sim.
So i Should get Vibrant custom rom not the I9000 rom?
And thank you Guys for your replay, I hope this tread will help other confused users on XDA
I would like everyone to know that it is not good thing to change there modem from T959 to i9000 your phone will brick never do it.
I just flashed a new rom from Trigger 3.2 which upgraded to Froyo 2.2 and i put in the settings for the Access Point and it works perfectly.
So if you have any difficulty accessing 3g or HSDPA connection on android 2.1 just upgrade it and it will work.
How did you conclude you're not on 3G? Do you get EDGE or GPRS internet connection?
So i need the 1800 mhz how can i do?
Flash a i9000 modem and see if it works.
Sent from my GT-I9000 using XDA Premium App
There is the possibility to brick the phone?
Hi guys
I recently got one of these shipped over to Australia. Now I've encountered a few network issues I'd like help to resolve.
1. I think the only HSDPA/UMTS bands available are only 900/2100MHz. That means I can't get access to Telstra's Next G Network as it runs on 850MHz. Unfortunately I can't get access to the service mode at all and I've also downloaded the network app from the android market to see if I can change the band that way, but that doesn't help either - the app just crashes. I guess there's not much I can do there.
2. According to all the sites I've seen about the specs for the phone - LTE bands supported are 800/1800/2600MHz. But I can't seem to get on Telstra's LTE in sydney. The phone assumes that even with a Telstra sim, I'm on roaming with SK Telecom and it states that 4G roaming is now available. The aforementioned network app is set to "GSM/WCDMA/LTE auto" - yet no LTE!
Perhaps I could flash to another ROM? but I'm not sure which would be applicable? The LG Nitro HD has the closest specs in my opinion. Any help would be greatly appreciated.
milkyways2 said:
Hi guys
I recently got one of these shipped over to Australia. Now I've encountered a few network issues I'd like help to resolve.
1. I think the only HSDPA/UMTS bands available are only 900/2100MHz. That means I can't get access to Telstra's Next G Network as it runs on 850MHz. Unfortunately I can't get access to the service mode at all and I've also downloaded the network app from the android market to see if I can change the band that way, but that doesn't help either - the app just crashes. I guess there's not much I can do there.
2. According to all the sites I've seen about the specs for the phone - LTE bands supported are 800/1800/2600MHz. But I can't seem to get on Telstra's LTE in sydney. The phone assumes that even with a Telstra sim, I'm on roaming with SK Telecom and it states that 4G roaming is now available. The aforementioned network app is set to "GSM/WCDMA/LTE auto" - yet no LTE!
Perhaps I could flash to another ROM? but I'm not sure which would be applicable? The LG Nitro HD has the closest specs in my opinion. Any help would be greatly appreciated.
Click to expand...
Click to collapse
1. usually, bands are hardware limited. Meaning if you don't receive a particular band, you probably won't ever be able to.
2. what bands does Telstra's LTE operate on? #1 applies here too. If the LTE antenna in the phone doesn't receive the frequency your operator is transmitting on, there's not much you can do.
And in your "Perhaps", why would you even consider flashing a ROM for a completely different phone to yours???? (unless you WANTED to end up with a paperweight)
EDIT: Look at this thread. Specifically what's in post 2, which reads "So it doesn't matter where you buy the phone from, it will work on Telstra unless you go buy the korean version or something." Just googling your model number (SHV-E120S), it looks like that IS a Korean version of the phone. The fact that you say it says something about roaming for SK Telecom (a South Korean carrier) seems to support that.
EDIT 2: a quick google for the SHV-E120S turns up this page, which says the phone is for networks voice GSM900, GSM1800, GSM1900, data (HSPA+) UMTS900, UMTS2100, and LTE frequencies LTE 800, LTE 1800, LTE 2600.
According to Telstra's wikipedia page, HSPA on Telstra is UMTS850 and UMTS2100, and LTE is LTE1800. So you won't get full support on all of Telstra's bands with that model of phone.
It looks like you'll prob be stuck with 3G nextwork if you use this phone in AUS.
Remember: DO NOT try to flash ROMs that is not for your phone. I've tried this one time and ended up hard-bricking my phone. NEVER DO THIS!
ctomgee said:
1. usually, bands are hardware limited. Meaning if you don't receive a particular band, you probably won't ever be able to.
EDIT 2: a quick google for the SHV-E120S turns up this page, which says the phone is for networks voice GSM900, GSM1800, GSM1900, data (HSPA+) UMTS900, UMTS2100, and LTE frequencies LTE 800, LTE 1800, LTE 2600.
According to Telstra's wikipedia page, HSPA on Telstra is UMTS850 and UMTS2100, and LTE is LTE1800. So you won't get full support on all of Telstra's bands with that model of phone.
Click to expand...
Click to collapse
Ive read a number of XDA sites where people flash and install new modems with different bands. Woudl it be possible to install a 850MHz modem into the above phone?
claud001 said:
Ive read a number of XDA sites where people flash and install new modems with different bands. Woudl it be possible to install a 850MHz modem into the above phone?
Click to expand...
Click to collapse
Um, no. No flash will ever address a hardware limitation.
SHV-E120S Network problem...
milkyways2 said:
Hi guys
I recently got one of these shipped over to Australia. Now I've encountered a few network issues I'd like help to resolve.
1. I think the only HSDPA/UMTS bands available are only 900/2100MHz. That means I can't get access to Telstra's Next G Network as it runs on 850MHz. Unfortunately I can't get access to the service mode at all and I've also downloaded the network app from the android market to see if I can change the band that way, but that doesn't help either - the app just crashes. I guess there's not much I can do there.
2. According to all the sites I've seen about the specs for the phone - LTE bands supported are 800/1800/2600MHz. But I can't seem to get on Telstra's LTE in sydney. The phone assumes that even with a Telstra sim, I'm on roaming with SK Telecom and it states that 4G roaming is now available. The aforementioned network app is set to "GSM/WCDMA/LTE auto" - yet no LTE!
Perhaps I could flash to another ROM? but I'm not sure which would be applicable? The LG Nitro HD has the closest specs in my opinion. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Hello guys,
I am from Nepal. I have Samsung SHV-120S and when i was updating my phone phone went to dead boot mode. I did dead boot repair using riff JTAG and after flashing using 4.0.4 i am unable to use gsm only network cause i dont have hspda and above netoworks here. Any solution?
Inside of mobile networks there is just 2 option LTE Preferred and 3G Only... but i dont have 3G network and i dont know about lte network.
i had tried teamleader rom also but problem doesnt appears...
help somebody..
sim tower problem
ctomgee said:
1. usually, bands are hardware limited. Meaning if you don't receive a particular band, you probably won't ever be able to.
2. what bands does Telstra's LTE operate on? #1 applies here too. If the LTE antenna in the phone doesn't receive the frequency your operator is transmitting on, there's not much you can do.
And in your "Perhaps", why would you even consider flashing a ROM for a completely different phone to yours???? (unless you WANTED to end up with a paperweight)
EDIT: Look at this thread. Specifically what's in post 2, which reads "So it doesn't matter where you buy the phone from, it will work on Telstra unless you go buy the korean version or something." Just googling your model number (SHV-E120S), it looks like that IS a Korean version of the phone. The fact that you say it says something about roaming for SK Telecom (a South Korean carrier) seems to support that.
EDIT 2: a quick google for the SHV-E120S turns up this page, which says the phone is for networks voice GSM900, GSM1800, GSM1900, data (HSPA+) UMTS900, UMTS2100, and LTE frequencies LTE 800, LTE 1800, LTE 2600.
According to Telstra's wikipedia page, HSPA on Telstra is UMTS850 and UMTS2100, and LTE is LTE1800. So you won't get full support on all of Telstra's bands with that model of phone.
Click to expand...
Click to collapse
GALAXY S2 HD LTE SHV-120s
while I try to dial it says the message "not registered on network" and after some time it again gets connected to the network but during call 90% of the time it delivers problematic calling experience...
jak_roj said:
Hello guys,
I am from Nepal. I have Samsung SHV-120S and when i was updating my phone phone went to dead boot mode. I did dead boot repair using riff JTAG and after flashing using 4.0.4 i am unable to use gsm only network cause i dont have hspda and above netoworks here. Any solution?
Inside of mobile networks there is just 2 option LTE Preferred and 3G Only... but i dont have 3G network and i dont know about lte network.
i had tried teamleader rom also but problem doesnt appears...
help somebody..
Click to expand...
Click to collapse
I have the exactly same problem here, any idea guys?
med.bassia said:
I have the exactly same problem here, any idea guys?
Click to expand...
Click to collapse
hello guys,
i had the same problem using it in Albania and i find somewhere that you can access the hidden menu by entering at the dial pad the code: 319712358 pass:996412. then at "network settings" you can select GSM modes.
i'm still facing some problem with the calls but overall it's working.
hope it helps.
how could i activate or turn the 3g to 4g? im from PHI
---------- Post added at 07:09 AM ---------- Previous post was at 07:04 AM ----------
ggeku said:
hello guys,
i had the same problem using it in Albania and i find somewhere that you can access the hidden menu by entering at the dial pad the code: 319712358 pass:996412. then at "network settings" you can select GSM modes.
i'm still facing some problem with the calls but overall it's working.
hope it helps.
Click to expand...
Click to collapse
can't access this one. after typing the password. im stuck and nothing happen.
Jepss said:
how could i activate or turn the 3g to 4g? im from PHI
---------- Post added at 07:09 AM ---------- Previous post was at 07:04 AM ----------
can't access this one. after typing the password. im stuck and nothing happen.
Click to expand...
Click to collapse
if you are on JB (4.1.2) it should work or you can even try an app from google play "SKTHiddenMenu", practically does the same thing.
hmm does this unit has many problem??
i would like to root my phone but i still can't find the right apps to use
MrallSunday said:
hmm does this unit has many problem??
i would like to root my phone but i still can't find the right apps to use[/QU
me too i want to root my phone but i can't find the way too. even access the 4g i only access 3g.
Click to expand...
Click to collapse
ggeku said:
if you are on JB (4.1.2) it should work or you can even try an app from google play "SKTHiddenMenu", practically does the same thing.
Click to expand...
Click to collapse
yes im on JB 4.1.2. but i'd stuck on it. after i enter the password? it doesn't happen or it didnt went through. i already try to download the SKTHiddenMenu. when i tap the network it doesnt happen. why else can i do to activate the 4G on this phone?
oh im sorry maybe thats why it not work because im using shv e 120L not 120s im sorry.
so now do you know the password for shv e 120L or its the same with shv e 120s?
I am running @epicboy 's CM11 build. I am in Ghana, west Africa and we don't have T-mobile here. The device is unlocked but interestingly, only one mobile network here works with the phone. And even that only gives me an edge connection. Is there some kind of modem I can flash ? Or is der a hardware fix I can try? Thanks
That depends on the band of the network you're trying to use and the bands that the phone has. The network I use here in Jamaica only only gives me edge but the other network allows me to use 3g because they support the 3g band that the vibrant has. There isn't anthing you can do about it to my knowledge and even if you can do something (I think) it won't be much or make a huge difference.
Hi all,
I inserted my AT&T SIM into a G850M, but it doesn't get mobile data connection. Calling and text messaging works fine. Anyone have suggestions? Thanks.
I think you should check the APN really carefully.
Probably something wrong on APN or the SIM card .
The Bands on 850 M are better for Metro PCS/Tmo .
Check which Bands AT & T use for Data .
I upgraded to 5.02, then did factory reset. That fixed it and I'm getting LTE on ATT.
cqdiep said:
I upgraded to 5.02, then did factory reset. That fixed it and I'm getting LTE on ATT.
Click to expand...
Click to collapse
Can you tell me if the G850M is carrier-branded in any way? I know the G850F isn't, and I was wondering if the same is true for the G850M.
Also, have you tried using the portable WiFi hotspot/tethering feature on the G850M? If so, does it work for free (without having it on your AT&T plan)? I know Nexus phones allow you to do this.
Thanks!
850M is not carrier-branded...it's sold by Vodafone.
I did use it to create a Wi-Fi hotspot to tether my laptop. It works well, and I do not pay extra for this feature on ATT.
Hi, I'm new here.
I own Universal Unlocked Samsung S10 Model # SM-G973U1 purchased directly from Samsung. I originally activated it on the Boost Mobile network and Ive decided to switch to AT&T prepaid service. I find out that the SM-G973U1 apparently wont utilize the AT&T Wifi Calling (Per: AT&T Forum). I was informed I'd need the SM-G973U.
I'm also not sure if I'm even getting the 4g connection (My phone shows LTE, LTE+, H, H+ and no connection).
I believe I have bad cell reception in my house.
If I were to install the SM-G973U firmware onto my SM-G973U1, would this solve my problem?
Will my phone still be an Universal unlocked phone?
If I choose to switch back to the SM-G973U1 firmware should I be OK?
Would I need to do the same if I were to switch to T-Mobile?
Would I be better off switching to T-Mobile?
Any other thoughts about this topic I should be aware of?
Thank you for your time.
Robert