Any informacion on this phone? Is it good/bad at its price? Root? ROMS?
Searching shows that it is similar to the Optimus L series but Im not sure....
Noone has this phone? Root? Custom ROMs? Im sure there is more than one person that has this pretty solid phone...
it's good, but I want cyanogenmod
riahc3 said:
Noone has this phone? Root? Custom ROMs? Im sure there is more than one person that has this pretty solid phone...
Click to expand...
Click to collapse
I have the l65 d280, it's pretty good for the price, however I can't seem to find ANY rom for this phone, so it kind of sucks being stuck with all the crapware my network carrier loaded into my phone, I'm not happy with that.
So for the time being, it lacks customization, however this could change in the following months, if and when this happens then yeah, I'll say it' a pretty solid phone.
aram123 said:
I have the l65 d280, it's pretty good for the price, however I can't seem to find ANY rom for this phone, so it kind of sucks being stuck with all the crapware my network carrier loaded into my phone, I'm not happy with that.
So for the time being, it lacks customization, however this could change in the following months, if and when this happens then yeah, I'll say it' a pretty solid phone.
Click to expand...
Click to collapse
Hello I have an equal
Buy lcd and glass for LG70.
before you change.
install CWM recovery image Lg l 70 d320n and hangs up.
change the lcd for lg l70.
and go.
Now you have a Lg l70.
**
XD
ya hay una rom basada en android 5.1.1 para el d280
aram123 said:
I have the l65 d280, it's pretty good for the price, however I can't seem to find ANY rom for this phone, so it kind of sucks being stuck with all the crapware my network carrier loaded into my phone, I'm not happy with that.
So for the time being, it lacks customization, however this could change in the following months, if and when this happens then yeah, I'll say it' a pretty solid phone.
Click to expand...
Click to collapse
There is unoficial CyanogenMod 12.1 ROM to this phone. It works good, only bugs are lack of NFC and turned upside down screen when lock animation is played. If sombody wonts instruction in english I can translate it.
forum.android.com.pl/topic/232755-511-nieoficjalny-cyanogenmod-121-dla-d280n-d285
Kuboko said:
There is unoficial CyanogenMod 12.1 ROM to this phone. It works good, only bugs are lack of NFC and turned upside down screen when lock animation is played. If sombody wonts instruction in english I can translate it.
forum.android.com.pl/topic/232755-511-nieoficjalny-cyanogenmod-121-dla-d280n-d285
Click to expand...
Click to collapse
I would like some english instructions if that's possible, thanks in advanced!
aram123 said:
I would like some english instructions if that's possible, thanks in advanced!
Click to expand...
Click to collapse
I'm sorry if ther are some mistakes but english is not my national language.
1.Root you phone
2.Downkload BusyBox and click Install in app.
3.Download any Terminal emulator for android.
4. Download from here forum.android.com.pl/topic/230998-clockworkmod-oraz-twrp (first link starting with www46)
5. Download this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
form forum.android.com.pl/topic/232755-511-nieoficjalny-cyanogenmod-121-dla-d280n-d285 and upload everything on sdcard
6.Run Android Terminal and type (I don’t remember exact point of mounting sdcard so you need to check them in your phone and change “/sdcard/aboot.img” and "/sdcard/recovery.img" this part so it will point in your file on sd card):
su
Press Enter
dd if=/sdcard/aboot.img of=/dev/block/platform/msm_sdcc.1/by-name/aboot
Press Enter
dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Press Enter
reboot
Press Enter
7.Your phone will reboot (here is a backup of those files you changed in step 5 mediafire.com/download/laozk15lbatu1iy/Backup_V10b_POL.zip)
8.You can enter to recorver trough some app with restart to recorvery or by pressing power and volume down while turning phone on, and when you see lg logo release them and hold them again. You will see alert about factory restarting your phone. Proceed as you would want to do that. You will see that phone is wiping down memory and it will run recorvery (without removing anything of course)
9.Back up your system using backup option (You need to back up System, Data, Boot)
10.Go to wipe menu and at advanced Wipe select Dlavik Cache, System, Data and wipe it.
11.Go to install and select CM, then fix w55n,then touch fix w55ds, and GAPPS if you want to.
12.If you want to you can download custom kernel from here mediafire.com/download/42d8xa4q1ve9e51/new_boot.img
su
Enter
dd if=/sdcard/new_boot.img of=/dev/block/mmcblk0p16
Enter
restart
Enter
13.You have a CM 12.1 on your phone .
Rom it's work !
I install the rom for Lg l65 d280n phones.
When will D280 lock screen animation bug fix?
1. copied everything from the memory card.
2. restarted the phone via adb recovery mode.
3. We do wipe data, cache, Dalvik cache system, a topic I did.
4. I installed the CM zip.
5. The repair bug holes.
6. After the GAPPS installed.
7. I started the phone again.
Except NFC all work!
dannu said:
I install the rom for Lg l65 d280n phones.
When will D280 lock screen animation bug fix?
1. copied everything from the memory card.
2. restarted the phone via adb recovery mode.
3. We do wipe data, cache, Dalvik cache system, a topic I did.
4. I installed the CM zip.
5. The repair bug holes.
6. After the GAPPS installed.
7. I started the phone again.
Except NFC all work!
Click to expand...
Click to collapse
I don't thik that they going to fix this because it's not problematic for users. Now they are planning to update it because it's version form 21.05.15 .
Kuboko said:
4. Download from here forum.android.com.pl/topic/230998-clockworkmod-oraz-twrp (first link starting with www46)
5. Download this
form forum.android.com.pl/topic/232755-511-nieoficjalny-cyanogenmod-121-dla-d280n-d285 and upload everything on sdcard
6.Run Android Terminal and type (I don’t remember exact point of mounting sdcard so you need to check them in your phone and change “/sdcard/aboot.img” and "/sdcard/recovery.img" this part so it will point in your file on sd card):
su
Press Enter
dd if=/sdcard/aboot.img of=/dev/block/platform/msm_sdcc.1/by-name/aboot
Press Enter
Click to expand...
Click to collapse
Hi there!
I can't move from the step six because the console gives me an error saying that can't reach the file or directory.
My computer recognize my lg l65 as an lg e460.
Could that be the reason of the problem?
I already installed all lg l65 drivers including ADB.
What could i do to my pc recognets my smartphone as an lg l65?
Thank you very much people!
Hi,
I tried to setup this with the sdcard as/data partition, but somehow the system is really slow at many points and network transfers also only use a ~5kB/s.
Is it possible that the problem is really only a slow SD, or could that be the rom itself what's slowing it down that bad?
L
Gesendet von meinem HTC One m7
Makoto123 said:
Hi there!
I can't move from the step six because the console gives me an error saying that can't reach the file or directory.
My computer recognize my lg l65 as an lg e460.
Could that be the reason of the problem?
I already installed all lg l65 drivers including ADB.
What could i do to my pc recognets my smartphone as an lg l65?
Thank you very much people!
Click to expand...
Click to collapse
Try with /mnt/shell/emulated/0 instead of /sdcard.
So commands of point 6 become
Code:
dd if=/mnt/shell/emulated/0/aboot.img of=/dev/block/platform/msm_sdcc.1/by-name/aboot
dd if=/mnt/shell/emulated/0/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Let us know if works or not
Hi guys,
I've flashed the rom and tried both nano and pico google apps but Play Store crashes unexpectedly every time I try to open it.
I can't install any app.
Can anyone tell me where to find google apps that works with this rom?
Thanks in advance
gain_ said:
Hi guys,
I've flashed the rom and tried both nano and pico google apps but Play Store crashes unexpectedly every time I try to open it.
I can't install any app.
Can anyone tell me where to find google apps that works with this rom?
Thanks in advance
Click to expand...
Click to collapse
It seems to be a memory problem, there's no enough free memory on my device...
Anyway, the home button not works for me... anyone experienced this problem yet?
9Lukas5 said:
Hi,
I tried to setup this with the sdcard as/data partition, but somehow the system is really slow at many points and network transfers also only use a ~5kB/s.
Is it possible that the problem is really only a slow SD, or could that be the rom itself what's slowing it down that bad?
L
Gesendet von meinem HTC One m7
Click to expand...
Click to collapse
Hi, I've rooted and moved all the apps on sdcard as well, and it was very slow due to the memory speed. Then I've bought a sdcard class 10 and now it's pretty fast, quite like the internal memory...
Sent from my LG-D280n using XDA-Developers mobile app
No Android 6? Id really like to add the use external memory as internal without rooting or anything.
root
ROOT
??????
Gesendet von meinem LG Nexus 5
Nothing still?
Related
Share your new "Experience"
- Since ICS
- Since Condi's AiO Tool
- Since Tiny App's
- Since Etc.
I am pleased to help
(THANKS)
Thank you for this post.
I will profit it to put a problem that I've since Honeycomb and continuous with ICS.
I've created a script to have the music in media library from sdcard2, that script was in init.d folder.
Since then I' m getting the error message:
"android.process.media has stopped unexpectedly. please try again."
Even after deleting the script I get this error every time that tablet starts.
I thought that with ICS upgrade this get fixed, but no, I still have the problem.
I'm sorry in advance if this is wrong topic to post this, it's just that I need 10 posts to create threads and post replys in other topics and I don't wanna just bluntly spam in order to ask one questions.
I have a problem rooting my tablet :
Model number : Sony Tablet S
Android version : 4.0.3
Kernel version : 2.6.39.4 [email protected] #1
Build number : TISU0017700
I've followed this rooting guide and also used Automated ADB Driver Installer for Sony Tablet S and P.
Seems like everythings working :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But I'm getting this problem at the very start of rooting with permissions, I tried old and updated rooting tools several times, but I constantly get this one error.
In any case, I hope this problem can be solved and I have everything right. ( Was trying to root a device first time ) x_x
Colorfool said:
I have a problem rooting my tablet:
Model number: Sony Tablet S
Android version: 4.0.3
Click to expand...
Click to collapse
"Android version: 4.0.3" is the problem. To the best of my knowledge, at this time, a tablet that has already been updated to Android 4.0.3 cannot be rooted, nor can it be downgraded to a version of Android that can be rooted. You will need to wait until an exploit is discovered/created.
rimsilva said:
Thank you for this post.
I will profit it to put a problem that I've since Honeycomb and continuous with ICS.
I've created a script to have the music in media library from sdcard2, that script was in init.d folder.
Since then I' m getting the error message:
"android.process.media has stopped unexpectedly. please try again."
Even after deleting the script I get this error every time that tablet starts.
I thought that with ICS upgrade this get fixed, but no, I still have the problem.
Click to expand...
Click to collapse
Try to delete cache from the app you use for music and if needed restart your tablet,
Cat McGowan said:
"Android version: 4.0.3" is the problem. To the best of my knowledge, at this time, a tablet that has already been updated to Android 4.0.3 cannot be rooted, nor can it be downgraded to a version of Android that can be rooted. You will need to wait until an exploit is discovered/created.
Click to expand...
Click to collapse
Thats indeed his problem, its not rootable for now, bad luck,
Mahaco said:
Try to delete cache from the app you use for music and if needed restart your tablet,
Click to expand...
Click to collapse
I have the same error, please explain better how to solve
thanks
Peter
Mahaco said:
Try to delete cache from the app you use for music and if needed restart your tablet,
Click to expand...
Click to collapse
Not solved.
Sent from my Sony Tablet S using Tapatalk 2 Beta-6
peterf9 said:
I have the same error, please explain better how to solve
thanks
Peter
Click to expand...
Click to collapse
rimsilva said:
Not solved.
Sent from my Sony Tablet S using Tapatalk 2 Beta-6
Click to expand...
Click to collapse
Try this,
Reboot into recovery goto Advanced then select Clear Dalvik Cache
If that still didn't do it, then you must reflash you Prerooted ICS,
Edit:
Do you still have some sort of file changed?,
if thats the case then i want to know which app contains the error you could try to reinstall the system app by changing its permissions etc,
with Romtoolbox for example. i will make backup try to upload the file you replace it wil the old one reinstall and then there should be a problem no more,
Also make shure you don't have any files left on you tablet wich contains changes,
Mahaco said:
Try this,
Reboot into recovery goto Advanced then select Clear Dalvik Cache
If that still didn't do it, then you must reflash you Prerooted ICS,
Edit:
Do you still have some sort of file changed?,
if thats the case then i want to know which app contains the error you could try to reinstall the system app by changing its permissions etc,
with Romtoolbox for example. i will make backup try to upload the file you replace it wil the old one reinstall and then there should be a problem no more,
Also make shure you don't have any files left on you tablet wich contains changes,
Click to expand...
Click to collapse
In recovery mode I don't have "advanced" option.
Only 1. reboot, 2. update from zip and 3. factory reset.
edit: SOLVED
In Setting / applications / All
I clear data for program "Media Storage" and the error message stopped!
rimsilva said:
In recovery mode I don't have "advanced" option.
Only 1. reboot, 2. update from zip and 3. factory reset.
edit: SOLVED
In Setting / applications / All
I clear data for program "Media Storage" and the error message stopped!
Click to expand...
Click to collapse
Thanks for letting us know, its good to hear that you solved your problem.
Doesn't come out of sleep
Several times a week, the tablet won't come out of sleep. Pressing the power button does nothing and I have to resort to using the reset button on the right side of the tablet. This started happening after ICS update.
Anybody else have this problem? Solutions?
yea i had that problem with HC, but maybe like 3 times since ive bought device. All i did was plug into pc and it turned on....has not happened in ics update, but it probably will.
Hey,
Just one question
Can we flash ICS by placing the zip in pendrive and connecting it to our Tablet?
Will the AIO tool find the zip?
Thanks
Nope, maby it can be possible but the recovery is not made to search in
external devices, only External SDCard inserted in the normal way,
Because if so you could simply search your PC within recovery
I know it can be used for a bootable image for PC but this won't work on Android (For now)
Who knows if some dev will change Recovery, and make it so, that he can find other devices as well.
I am new to all this. I successfully rooted the tablet without using AiO tool. But i have no idea where to proceed next. Can you dirext me to the appropriate forum/topic/post that can help me move forward.
Sent from my Sony Tablet S using xda premium
Hello all,
Since ICS update, battery behaviour is very weird, it is dischargind very quickly, also when standby. It last one day and a hal whereas before it lasted at least 4 or 5 days... Am I the only one concerned by that problem ? Do you think it could be caused by something else than ICS update ?
Thank you all in advance...
sagar13 said:
I am new to all this.
I successfully rooted the tablet without using AiO tool. But i have no idea where to proceed next. Can you dirext me to the appropriate forum/topic/post that can help me move forward.
Click to expand...
Click to collapse
Condi's AiO-tool topic
elfeneco said:
Hello all,
Since ICS update, battery behaviour is very weird, it is dischargind very quickly, also when standby. It last one day and a hal whereas before it lasted at least 4 or 5 days... Am I the only one concerned by that problem ? Do you think it could be caused by something else than ICS update ?
Thank you all in advance...
Click to expand...
Click to collapse
Its most likely that you have some sort of app installed that drains your battery,
Do you use a Task killer?, that kills automatic?
Because this can cause battery drain aswell, since android has his own way of killing his apps there is no need to kill apps by an 3th-party appkiller.
You can check in your app settings, within running apps, which apps currently are
running, like a music player of movie player.
Also Bluetooth, Wi-Fi, Auto Sync and GPS can use allot of energie.
i'm not shure how long my tablet runs if its in standby, but it is longer then yours.
No task killer running, I do that manually...
But I've uninstalled chrome beta and since last charge, 14 hours ago, tablet has lost 11%...
Kind of bizarre...
Hello i am new user from Bulgaria and i have Prestigio PAP4040 Duo with Android 4.0.4 Ice Cream Sandwitch.Can I flash my phone with the new Android 4.1 Jelly Bean and how can i choose the right ROM for my phone.Is the Jelly Bean going well?Sorry for the BAD English.
I have the same device
demoncho87 said:
Hello i am new user from Bulgaria and i have Prestigio PAP4040 Duo with Android 4.0.4 Ice Cream Sandwitch.Can I flash my phone with the new Android 4.1 Jelly Bean and how can i choose the right ROM for my phone.Is the Jelly Bean going well?Sorry for the BAD English.
Click to expand...
Click to collapse
Phone is very good and cheap. I've been using it for a while. So far no luck rooting or modifying it.
Any helo would be apreciated.
THX
If anyone would like to know, I've managed to root the phone using following "n00b" steps:
1. Step
- download, install and run SuperOneClick v2.3.3.
- make sure you have USB debugging mode on
- plug in USB cable and click root.
- the program will ask you to install drivers.
- install them even if they are not signatured by Microsoft.
- after you installed all the drivers, restart computer
2. Step
- download and install this http://www.4shared.com/dir/RR8GM4vj/_online.html
- run runme.bat
- choose 1) Normal
- follow the instructions
- make sure you hit restore button on your device when prompted
- phone will reboot twice, don't worry
Enjoy your rooted device!!!
Credits to bin4ry for creating the method.
If you like my post, thank me
I have rooted my phone using this Android_4.0.4_mtk6575_Alps.ICS.MP.V2.2_ROOT. It`s easy and i have no problems with it.But I want to change my stock rom with 4.1 Jelly Bean but i don`t know is my phone will run Jelly Bean?
there is no working recovery on 4040 know yet
there isn no working jb or any coustom rom know to me that works on 4040
but if you want you can track update packages while downloading upgrade
and download flash tool drivers service manual and clean stock rom with version 1.0.10 it works much better then stock with upgrade.zip via ota i case off system crash while modding
new info
must say that stock rom with updates was terrible with rom nr PAP4040DUO_20121101_V1.0.10 mine GPS is much better. Before update there was a 64 -70 feet, now take a look gps i worth using
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When I check for System update there was one and when i download it and run it my phone turn off and go to recovery and starts to install the update but when it goes to 1/3 from 100% it shows some Error in system\media\bootanimation.zip and some ****s after that and can`t install.Do you know why and how i fix it?
demoncho87 said:
When I check for System update there was one and when i download it and run it my phone turn off and go to recovery and starts to install the update but when it goes to 1/3 from 100% it shows some Error in system\media\bootanimation.zip and some ****s after that and can`t install.Do you know why and how i fix it?
Click to expand...
Click to collapse
Every update package via ota have a list of correct checksum of files or a part of it you must put orginal file then do update i had this same error with build.prop with old one update have happy end
WRaven512 said:
Every update package via ota have a list of correct checksum of files or a part of it you must put orginal file then do update i had this same error with build.prop with old one update have happy end
Click to expand...
Click to collapse
You may right but i don`t have backup of the original bootanimation.zip. I have tried to Reset to factory but with no sucsess.
demoncho87 said:
You may right but i don`t have backup of the original bootanimation.zip. I have tried to Reset to factory but with no sucsess.
Click to expand...
Click to collapse
let see i will upload my own backup off system folder this is a clean clean version off system folder before rooting and any mod, may some time to upload
then take it in safe place and make credits
uploading on this link may take 16 min tu upload
https://dl.dropbox.com/u/11070101/system.7z
and this is a file with i have from prestigio server
maunal +drivers + service rom +and software to make a clean phone
here is the link upload may take a while
https://dl.dropbox.com/u/11070101/PAP4040DUO_20121101_V1.0.10.7z
please take all links to a safe server a don want to use my dropbox limit to expire because this are large files and a have a more then one android device and modded firmware which I am sharing
Sorry for my pour english BTW I'm now just a little bit drunk
and this is rooting tool for 4040 which i was using
it also make a bcp of a rom befor mod
make a soft root and bcp and then install root with this tool
https://dl.dropbox.com/u/11070101/MTKdroidTools.7z
Thanks a lot i restore my original rom.THANKS!!!!You are great!
There is cwm ported by Croatian guy. It works I've tested it.
http://translate.google.com/transla...//forum.pcekspert.com/showthread.php?t=240504
Just a quick update
I'll put my ClockWork Mod builds for PAP4300 and PAP4040 to my server. Can't post any links here yet, so be sure to check the link from t830mc's previous post.
For now, only 2 quick builds made using kitchen plugin for mt6575 are available.
This is all pre-alpha, not mounting anything properly, so it's pretty much useless for end users.
However, adb works fine for me (tested only on PAP4040), so I can mount and do what's needed.
I'm testing things for model 4040 myself, but can't test for model 4300 because I don't have that device, so be sure to let us all know if it works or not.
1.0.09 update
could someone upload update 1.0.09 ? i currently have version 1.0.08 and OTA offers me 1.0.10, but it tells that update.zip is invalid when i try to update, so i guess i need to update 1.0.09 first
Hello, can someone please refute the fact that this phone does not work on applications that use google maps: Meteor, Everytrail, TripJournal, Geocaching (official), etc.?
Support Prestigio me referring to the producers of these programs.
One of the programmers wrote me that the problem is in the poor implementation of Android, which must be repaired by Prestigio.
So a vicious circle and I do not work on this phone programs that use Google Maps. One user malfunction layers above the map also confirmed.
Thanks
Root
Android 4.0.4
PAP4040DUO20121101.V1.0.10
Guess what I did on 4040
Sent from my PAP4040_DUO using xda app-developers app
europoint said:
Hello, can someone please refute the fact that this phone does not work on applications that use google maps: Meteor, Everytrail, TripJournal, Geocaching (official), etc.?
Support Prestigio me referring to the producers of these programs.
One of the programmers wrote me that the problem is in the poor implementation of Android, which must be repaired by Prestigio.
So a vicious circle and I do not work on this phone programs that use Google Maps. One user malfunction layers above the map also confirmed.
Thanks
Root
Android 4.0.4
PAP4040DUO20121101.V1.0.10
Click to expand...
Click to collapse
There is a bug in system folder just copy two files from frameworks to framework dir and reboot
Sent from my PAP4040_DUO using xda app-developers app
Many thanks, it works. :good:
Another problem:
How to install "Google Play services" com.google.android.gms (for example, needed to log on to YouTube or the functioning of the app My Tracks)?
Installation of "services" always ends up error message:
Incompatible with other applications that use the same shared Memberlist ID.
(The procedure described here did not help: http://forum.xda-developers.com/showthread.php?t=1219029)
Thank you.
hmm I did not notice this issue before you get this issue when you will get latest update from play store . Now when i have a custom version of a rom and i have instaled youtube in /system/app, and i just removed update,
this is orginal youtube apk or not but it works fine
just clear data and uninstall current youtube.apk and install this one or push it to to system and DONT UPDATE IT
https://dl.dropbox.com/u/11070101/com.google.android.youtube-2.apk
also you may try older ver of my tracks and try if it works, Prestigio must do a fast update of this error but i think they are to busy with mk6577 and mk6575 will be left alone
Thank you, Youtube now works.
Still, I can not install "Google Play services" (com.google.android.gms) that are needed to run "My Tracks" (com.google.android.maps.mytracks).
Installation of "services" always ends up error message: Incompatible with other applications that use the same shared Memberlist ID.
In the file "/data/system/packages.xml" is nothing (com.google.android.gms) I could erase.
Thank you.
Can anybody test SDXC 64GB card on this phone?
Can anybody test SDXC 64GB card on this phone?
Prestigio claims that this phone suports SDHC and SDXC standards up to 32 GB.
But SDHC standard is up to 32GB and SDXC starts from 32GB up to 2 TB.
So my question is maybe they did not have 64 GB SDXC card to test
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the official thread for UltimaROM Questions and problems. It will be maintained by myself, Coreym and other dutiful members!
REserved
Another one, just in case
What are the chances of making this available for the i9305? I know the partition and radio are different. However, if the partition part was adapted and the radio was removed from ultima rom (i.e. old radio remains on device), would this be doable?
I hate how my i9300 constantly is at almost full ram, wanna get the 2GB version. But the Dev support is minimal (at best)
If someone bought me one I'd do one for sure, but I can't afford one.
And unused RAM is wasted. Android uses as much RAM as possible on purpose. If you had enough apps on the LTE phone it would also try to run as much RAM as possible.
Sent from my GT-I9300 using xda premium
versie 4.2.1
when there come versie 4.1.2 from ultimarom
Can 4.2 camera app change the lock screen wallpaper now ?
I'm using this rom sence ver 4.1 , it's a great rom , but i found that if i use the 4.2 camera & gallery APP in the higher version of ULTIMA, i cant change my lockscreen wallpaer.
now 6.0 updat is coming ,can i change it by using 4.2 camera & gallery APP + AOSP lockscreen?
Many thanks!
Unfortunately not it's a common problem with the 4.2 galley at the moment. You should install the stock camera or Note II to change it
Sent from my GT-I9300 using xda premium
AROMA crashes
I haven't been able to get through the installer without my phone crashing.
First time coming from another rom, I tried to install UltimaROM 5.1. I performed a wipe data/factory reset and install zip from internal sd. Pick ultra wipe, siyah kernel etc and on the last step I press "Next>" and the phone crashes. I pull out the battery and reboot system, and voila UltimaROM is installed.
Second time I want to install UltimaROM 6.0. Perform wipe data/factory reset, and at the bloatware removal screen I scroll down only to cause a crash once again. I repeat the battery removal process go into the installer again, and it crashes again when I untick the Samsung Apps option. Third time it gets stuck at the last step again, and after I unplug the battery for the last time I have v6 installed.
Why did I have to go through all this trouble. Was I doing something wrong?
Try this!
jhonwds said:
I haven't been able to get through the installer without my phone crashing.
First time coming from another rom, I tried to install UltimaROM 5.1. I performed a wipe data/factory reset and install zip from internal sd. Pick ultra wipe, siyah kernel etc and on the last step I press "Next>" and the phone crashes. I pull out the battery and reboot system, and voila UltimaROM is installed.
Second time I want to install UltimaROM 6.0. Perform wipe data/factory reset, and at the bloatware removal screen I scroll down only to cause a crash once again. I repeat the battery removal process go into the installer again, and it crashes again when I untick the Samsung Apps option. Third time it gets stuck at the last step again, and after I unplug the battery for the last time I have v6 installed.
Why did I have to go through all this trouble. Was I doing something wrong?
Click to expand...
Click to collapse
With my experience, DO NOT WIPE ANYTHING in Ultima Aroma installer.
So how can i install ULTIMA if i came frome another rom? It's simple, just wipe data / cache / dalvic in Recovery, otherwise use a wipe script such as "Revolution rom super wipe script" in Recovery.
Hope that can help. :fingers-crossed:
---------- Post added at 09:04 PM ---------- Previous post was at 08:47 PM ----------
And i aldo stucked during the istallation, or stucked when i chose the app / mod / theme in aroma(quit often in V5),so be paitient, finally it will work.
(how to prevent that happen efficiently? i always make my self tick the checkboxes only once druing the installation )
Well I've updated to the latest AROMA installer version and I wipe all the time using the installer. I even have an AROMA installer just for wiping.
What version of CWM are you using?
A bit of help with the AOSP messaging again. I love the way it looks and don't really like Samsungs messaging app because the text is rather large and not as smooth looking.
I have went into Google contacts on the website and changed the number of a friend of mine it looks similar to this +14045555555 is this the correct formatting? I did it that way because one of my contacts was set up that way and her messages would go into a thread, but others that I changed would still just pop up as new threads. Is there anything else that is required of me after I change the numbers?
war eagle said:
A bit of help with the AOSP messaging again. I love the way it looks and don't really like Samsungs messaging app because the text is rather large and not as smooth looking.
I have went into Google contacts on the website and changed the number of a friend of mine it looks similar to this +14045555555 is this the correct formatting? I did it that way because one of my contacts was set up that way and her messages would go into a thread, but others that I changed would still just pop up as new threads. Is there anything else that is required of me after I change the numbers?
Click to expand...
Click to collapse
Ok for me it's like this:
+447123456789
+44 = country code
07123456789 = phone number
Just strip out the leading 0 and put it on the country code
I want to test both the S3 and Note2 cameras side by side but I don't like to try to decompile, change package name and then recompile the app. So is there another way to do it (since I assume that they have same package name)? Or can someone tell me which they prefer from their own experience.
Kryten2k35 said:
Ok for me it's like this:
+447123456789
+44 = country code
07123456789 = phone number
Just strip out the leading 0 and put it on the country code
Click to expand...
Click to collapse
Messages are now threading!!!! I had set my contacts up the way of the working one while I awaited your response and went ahead and reflashed and my messages are threading. Thank you!!!!!
Also, is there anyway to make the icons smaller? I guess change the resolution is what i'm asking.
EDIT: I figured it out, I figured that post in the other thread about DPI must have been something about that. So I googled and came up with how to change the DPI and changed it to 240 and it's perfect. I will definitely tell about your rom.
THANKS!
I have been using ur rom for ages now never changed, your rom is awesome man. However, I flashed the latest version (v6.0) and for some reason it does not allow me to view the caller id even though I have them in my contacts which is a big problem for me. Did i do something wrong or is this a known issue.
Kryten2k35 said:
Well I've updated to the latest AROMA installer version and I wipe all the time using the installer. I even have an AROMA installer just for wiping.
What version of CWM are you using?
Click to expand...
Click to collapse
I'm using v5.5.0.4, should I assume that's the problem?
jhonwds said:
I'm using v5.5.0.4, should I assume that's the problem?
Click to expand...
Click to collapse
Yes, most stuff works better in CWM6, to be honest
Hi!
First of all I gotta say thank you for an amazing rom. I've been using 5.1 for about a week and have'nt encounterd any bugs at all. However today I downloaded the 6.0 and experienced a few problems. While I was flashing 6.0 aroma launcher freezed at about 95% so I had to pull the battery and redo it again. 2nd time it worked. Everything in the rom seems to work just as weel as in 5.1 accept for the video player that FC everytime I try to watch a video clip. Tried rebooting etc. Does'nt help.
Anyways great job with the rom!
ImSpecial said:
Hi!
First of all I gotta say thank you for an amazing rom. I've been using 5.1 for about a week and have'nt encounterd any bugs at all. However today I downloaded the 6.0 and experienced a few problems. While I was flashing 6.0 aroma launcher freezed at about 95% so I had to pull the battery and redo it again. 2nd time it worked. Everything in the rom seems to work just as weel as in 5.1 accept for the video player that FC everytime I try to watch a video clip. Tried rebooting etc. Does'nt help.
Anyways great job with the rom!
Click to expand...
Click to collapse
Yes, I've got a fix for that already. I'm just holding out to see if this contacts problem is a ROM issue or not. I'm thinking it isn't and must be something else but I want to make sure so I can fix all three in one patch. But there is a solution for it, don't worry
Hey guys,
as you know I am currently working on a CM port for the Viewpad 7e, I am uploading for now a clean stock rom with important Google Apps.
This ROM is not rooted but can be rooted easily with Gingerbreak which can be found here -> http://forum.xda-developers.com/showthread.php?t=1049944
How to Install Guide (same like original ROM)
Added Feature
- USB-Port Charging
- 160DPI Density (through build.prop Modification)
- Google Package for Gingerbread (20110828)
- latest Play Store 3.10.10 & full Market Access (Device will be recognized as Galaxy Tab & Android 2.3.7)
Removed
- Viewsonic/ViewPad Bloatware Apps
- Viewsonics/ViewPad Media
- Fringe, Sketcher & loads more unneccesary software which can be added back if needed through Play Store
User reported Bugs:
- Install Problems (see Post for the fix)
- Google Play Issue (see Post for the fix)
Future Changes
- SetupWizard to Setup Google Account on first Startup
- 2nd Rooted ROM Version
- Screenshot Power Option/Shortcut
- more Setting Options (CM port)
Thanks to
KRisM79 for build.prop for Full Market access
Download Link
v1 (01172013 - based on 11252011) - http://www.multiupload.nl/X5IHYVQBTQ
Step By Step Install Guide
1. Confirm that there is no other Custom ROM or ViewPad 7e firmware file in the micro SD card.
2. Copy the new Custom ROM file to the micro SD card root folder.
3. Turn off the ViewPad 7e and insert the micro SD card to the device.
4. Keep pressing the volume up and power button at the same time.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Until the ViewSonic logo flashes, release the buttons.
6. The device will automatically start firmware upgrade.
7. After the firmware upgrade successfully, the ViewPad 7e will automatically shutdown. And you can manually boot it up to configure the basic settings.
NOTE!!!
Please make sure the battery power is more than 30% or the AC adapter is plugged in.
This flashing method will erase all data on your ViewPad 7e.
reserved
the viewpad 7e is not a viewpad7 or a variant of the viewpad7, its a totally different HW base, this thread is in the wrong area.
Error
I can´t install that!
@flez1966: there is no other forum for the 7e and posted cuz many of the 7e users are browsing these forums for their device anyway
@cpbaixo: what error message do u get, which firmware is your 7e running at the moment - please describe your problem, thanks
Found a new Firmware for the 7e, 11282011 - wont be able to work further on this project as I am on holidays back in Germany and left my Viewpad back in London - if anybody is really interested then I would take my time to work on a new build else would wait til I am back in London ...
If somebody should have an issue with applications which can't be installed from play store due to memory problems - try cache fixer from play store or as apk download - will try to fix that issue in next release
CACHE FIXER DL -> https://play.google.com/store/apps/details?id=tk.rede.cacheFixer
And yea I hope will get some more support on this project else i doubt if anyone would be using this - also let me know if you want a pre-rooted ROM in future ...
Sent from my SGH-I897 using xda app-developers app
Sorry for something only now, i can´t install because my ViewPad is not the 7e, is the 7 only!
receiving following error:
assert failed: run_program("/tmp/fuse","userstorage","format")
E:Error in /sdcard0/F70_VSEI_S_W_C_01172013.zip
(Status 7)
Click to expand...
Click to collapse
any ideas?
Solution:
Missplaced zip. after putting it into the right place everything worked fine! =)
---------- Post added at 09:24 PM ---------- Previous post was at 08:41 PM ----------
it seems that the google account is missing.
i can't create one and everytime i want to add an account it only opens Exchange Account stuff.
any ideas?
cpbaixo said:
Sorry for something only now, i can´t install because my ViewPad is not the 7e, is the 7 only!
Click to expand...
Click to collapse
This ROM is for ViewPad 7e only
Enovie said:
[/COLOR]it seems that the google account is missing.
i can't create one and everytime i want to add an account it only opens Exchange Account stuff.
any ideas?
Click to expand...
Click to collapse
received many PM on that issue, thanks to batrat44 for finding the issue:
batrat44 said:
HI DrSauerkraut,
Can not add a google account. I was obliged to change the file "GoogleServicesFramework.apk" and it solved the problems.
Rom is Rooted, everything works, very fast without bloatware.
more than bug with micro sd card, and the root
whereas before there were bugs on the stock fimware
Sorry for my english pitiful, I'm French.
Click to expand...
Click to collapse
also if you should encounter some problems with the install progress see following solution of mladen:
mladen.perisic said:
..., I wanted to share some experiences regarding installation process. I downloaded your ROM and I had some problems installing it (or stock ROM for that matter).
Since I'm authorized Viewsonic service engineer I got stock ROM from them (which is same as the one you based your ROM on) and I used it many times to repair many Viewpad's 7e. Every time it worked flawlessly, but on this unit in particular, it did not. There were messages regarding formatting unsupported file system (ext3) and not recognizing mSD card or not founding update on card at all (most of those problems are affecting your ROM too). After much of experiencing I found procedure which worked:
1: Extract update package
2: Edit normal update script and comment lines regarding formatting userstorage
3: Compress everything into update package again
4: I am not sure, but this step could be true: rename package to original name (F70_...). Even your ROM refused to flash if I change the name to update.zip or anything else
5: Remove your mSD card and turn on your tablet and connect it to computer.
6: Enable USB storage mode and format (!) internal iNAND.
7: Copy update package to the internal memory and disconnect the tablet.
8: Turn off USB storage mode and turn off the tablet.
9: Start update process by holding Volume+ and Power button.
Click to expand...
Click to collapse
I am still away from my "equipment" and the ViewPad, will continue on the developement from the 11th feb hopefully.
thanks again for all your support and hopefully i can get some more work done in future, also I am considering doing a 2nd rooted version to safe you guys another step. so in future there would be a rooted and non-root version of this ROM, and of course a bugfixed one - therefore i need your help guys!
Dr Sauerkraut
DrSauerkraut said:
Found a new Firmware for the 7e, 11282011 - wont be able to work further on this project as I am on holidays back in Germany and left my Viewpad back in London - if anybody is really interested then I would take my time to work on a new build else would wait til I am back in London ...
Click to expand...
Click to collapse
Thanks to dpirotto for the later ROM Update (http://forum.xda-developers.com/showthread.php?t=2188781), downloading at the moment so will see what kind of changes have been made - will upload a newer version of this rom with Bugfixes soon ...
Install CWM
How to install CWM on this ROM?? i am unable to install any cwm version. it said "error scanning partitions: No such file or directory"
ic92 said:
How to install CWM on this ROM?? i am unable to install any cwm version. it said "error scanning partitions: No such file or directory"
Click to expand...
Click to collapse
Still working on this, but as I had my exams the last month I was too busy to work on this project. Basically we need to repartition the device or find a way to get CWM onto the device without repartitioning.
DrSauerkraut said:
Quote:
Originally Posted by Enovie View Post
[/COLOR]it seems that the google account is missing.
i can't create one and everytime i want to add an account it only opens Exchange Account stuff.
any ideas?
received many PM on that issue, thanks to batrat44 for finding the issue:
Quote:
Originally Posted by batrat44
HI DrSauerkraut,
Can not add a google account. I was obliged to change the file "GoogleServicesFramework.apk" and it solved the problems.
Rom is Rooted, everything works, very fast without bloatware.
more than bug with micro sd card, and the root
whereas before there were bugs on the stock fimware
Sorry for my english pitiful, I'm French.
Click to expand...
Click to collapse
So... I have to change the GoogleServicesFramework.apk? And what exactly do I have to do with it?
Hey Guys,
sorry for the long delay as I was busy with personal stuff. Right now I have got more time to work on this ROM and I will definitely get Android 4 running on the VP7E as I have got enough informations to get a successfull result on it. The only issue right now that I have to find my tablet as I have missplaced it to get the work done and also I need at least 2 Tester who are able to cooperate quite quick with me so I can build a stable ROM before Uni starts again in September.
For the rest of you guys, you won't have to wait for too long anymore. Possibly few weeks to go for a open-beta release.
DrSauerkraut
PS: Interested Tester please inbox me!
Any news about your work?
I'm very interested.
Greetz Hypno
++++++++++++++++++++
Irgendwelche Neuigkeiten zum Rom?
Ich wäre wirklich interessiert
What happened with the update to android for Viewpad 7e?
Anyone else have a vizio smart tv? I love the app, but 99% of my usage are the smart TV functions....I got nothing on the app other than basics. Wondering if learning would be an option.
I'm pretty sure the app can learn commands. One guy said he programmed his fireplace.
Supposedly the Remote app is very customizable.
-sent from my LG G2 using XDA Premium 4
player911 said:
I'm pretty sure the app can learn commands. One guy said he programmed his fireplace.
Supposedly the Remote app is very customizable.
-sent from my LG G2 using XDA Premium 4
Click to expand...
Click to collapse
The app can learn
Thanks guys, time to play! If I can get netflix and amazon to launch and use the menus I will be a happy guy!
As others have stated the app can learn and does so with all remotes
SO easy!! Love this thing.
Yea it can learn by going into the universal remote and creating one by following the directions of course i have no remote for my tv but i do for the cable box
Have a 55" vizio. All commands are working, just a bit different from remote. Charter keys don't work, but all menu keyss through menu are working. Just a bit different placement.
Is it possible to reinstall Quick Remote on LG G2
Hi,
My Quick Remote stopped working. When I touch it, all I get is two LG documents. I tried to reinstall an apk file, but all I get is that my current installation failed since such a program already exists.
How can I regain Quick Remote capabilitiers?
Is there a way uninstalling and reinstalling it?
Is there any other way?
In addition, some sources offer a single file, LGQRemote.apk, some a pair - LGQRemote.apk and LGQRemote.odex and some three pairs - LGQRemote.apk' LGQRemote.odex, QuickSet.apk, QuickSet.odex, QuicksetSDK.apk and QuicksetSDK.odex.
Which ones should I use? And, if a pair' how do I relate to the *.odex files?
chermesh said:
Hi,
My Quick Remote stopped working. When I touch it, all I get is two LG documents. I tried to reinstall an apk file, but all I get is that my current installation failed since such a program already exists.
How can I regain Quick Remote capabilitiers?
Is there a way uninstalling and reinstalling it?
Is there any other way?
In addition, some sources offer a single file, LGQRemote.apk, some a pair - LGQRemote.apk and LGQRemote.odex and some three pairs - LGQRemote.apk' LGQRemote.odex, QuickSet.apk, QuickSet.odex, QuicksetSDK.apk and QuicksetSDK.odex.
Which ones should I use? And, if a pair' how do I relate to the *.odex files?
Click to expand...
Click to collapse
Try to go to settings>apps and then system apps and find the quick remote and wipe cache and updates if there are.
The odex is also if you have odexed system (stock) and deodexed so without odex probably for modified stock or deodexed stock.
No "System Apps"
wulsic said:
Try to go to settings>apps and then system apps and find the quick remote and wipe cache and updates if there are.
The odex is also if you have odexed system (stock) and deodexed so without odex probably for modified stock or deodexed stock.
Click to expand...
Click to collapse
Thanks, wulsic.
Tried to locate the "System Apps"', but there's no reference to these applications in my "Apps" list.
May I need a third party tool for this task?
chermesh said:
Thanks, wulsic.
Tried to locate the "System Apps"', but there's no reference to these applications in my "Apps" list.
May I need a third party tool for this task?
Click to expand...
Click to collapse
System>General>apps>all
It must be there.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well, I wish I had it. Checked my list and no sign for its existance. Still, when I try to unstall, installation fails.
Can it be a hidden installation?
Is there a possibility for an application to reported without it being listed?
chermesh said:
Well, I wish I had it. Checked my list and no sign for its existance. Still, when I try to unstall, installation fails.
Can it be a hidden installation?
Is there a possibility for an application to reported without it being listed?
Click to expand...
Click to collapse
Do you have the app in the launcher? All the system apps must be listed in this tab. Maybe you have it installed in /data and should be listed in the first tab in this case...
For the installation fail,if you have recovery go and wipe cache and dalvik,sometimes app cache/dalvik got corrupted and you can't reinstall it.
If you have recovery find the thread for quickremote for aosp and try to flash it,maybe it will work.
If you have only root,try to manually replace them and don't forget to set right permissions.
P.s.- Of you have root try to search /data for "remote" and delete all you thing is connected with the app,then try to install it again.
unfortunately I ...
siankatabg said:
Do you have the app in the launcher? All the system apps must be listed in this tab. Maybe you have it installed in /data and should be listed in the first tab in this case...
For the installation fail,if you have recovery go and wipe cache and dalvik,sometimes app cache/dalvik got corrupted and you can't reinstall it.
If you have recovery find the thread for quickremote for aosp and try to flash it,maybe it will work.
If you have only root,try to manually replace them and don't forget to set right permissions.
P.s.- Of you have root try to search /data for "remote" and delete all you thing is connected with the app,then try to install it again.
Click to expand...
Click to collapse
Unfortunately, I took no precautions with my LG G2 and have no recovery options.
I tried your last resort option, "try to search /data for "remote" and delete all you thing is connected with the app", but since android experience is very short. I encounter difficulties implementing it.
How do I run a search for "Remote" in "/data"? I've these apps on my unit: root browser, root checker, ES File Explorer. Do I need anything else?
chermesh said:
Unfortunately, I took no precautions with my LG G2 and have no recovery options.
I tried your last resort option, "try to search /data for "remote" and delete all you thing is connected with the app", but since android experience is very short. I encounter difficulties implementing it.
How do I run a search for "Remote" in "/data"? I've these apps on my unit: root browser, root checker, ES File Explorer. Do I need anything else?
Click to expand...
Click to collapse
This is only going to end in tears and bricks.
I think you have some other issue, if you say you get "LG Documents" maybe you didn't actually get the QR files to install at all? I'd re-do whatever install steps.
And as for the install location, you have to flash the zip, therefore the two APKs that installed are:
/system/app/LGQRemote.ap
/system/app/QuicksetSDK.apk
There are some other files which the zip installs.
How exactly did you install it in the first place? I haven't seen anything where you just install the APKs.
QR installation
khaytsus said:
This is only going to end in tears and bricks.
I think you have some other issue, if you say you get "LG Documents" maybe you didn't actually get the QR files to install at all? I'd re-do whatever install steps.
And as for the install location, you have to flash the zip, therefore the two APKs that installed are:
/system/app/LGQRemote.ap
/system/app/QuicksetSDK.apk
There are some other files which the zip installs.
How exactly did you install it in the first place? I haven't seen anything where you just install the APKs.
Click to expand...
Click to collapse
My LG G2 came with QR preinstalled. It stopped working, but I don't have a clue as to the circumstances.
I found the installation files in the /system/app/, but can't install them. The installation end up with a failure. Some files must be cleaned first, but which ones, I don't know.
khaytsus said:
This is only going to end in tears and bricks.
I think you have some other issue, if you say you get "LG Documents" maybe you didn't actually get the QR files to install at all? I'd re-do whatever install steps.
And as for the install location, you have to flash the zip, therefore the two APKs that installed are:
/system/app/LGQRemote.ap
/system/app/QuicksetSDK.apk
There are some other files which the zip installs.
How exactly did you install it in the first place? I haven't seen anything where you just install the APKs.
Click to expand...
Click to collapse
I made that couple of times in my expiriens with android(almost 4 years),without problems and bricks,but there is always a risk.
On the problem.
If the files are in /system/app ,they are already installed and you dont need to install them from there.Download the zip for the aosp mod,open it and see what files and where they need to be placed,then backup the original apks from the /system/app(just copy them somewhere in your SDcard) and then replace them with the apks from the aosp zip.Dont forget to change permissions on all the files you'r replaced to rw-r--r--.
Good luck
chermesh said:
My LG G2 came with QR preinstalled. It stopped working, but I don't have a clue as to the circumstances.
I found the installation files in the /system/app/, but can't install them. The installation end up with a failure. Some files must be cleaned first, but which ones, I don't know.
Click to expand...
Click to collapse
So Quick Remote is just not working, you haven't modified the ROM, or changed the ROM in any way??
siankatabg said:
Do you have the app in the launcher? All the system apps must be listed in this tab. Maybe you have it installed in /data and should be listed in the first tab in this case...
For the installation fail,if you have recovery go and wipe cache and dalvik,sometimes app cache/dalvik got corrupted and you can't reinstall it.
If you have recovery find the thread for quickremote for aosp and try to flash it,maybe it will work.
If you have only root,try to manually replace them and don't forget to set right permissions.
P.s.- Of you have root try to search /data for "remote" and delete all you thing is connected with the app,then try to install it again.
Click to expand...
Click to collapse
I did the following:
1. Installed TWRP 2.7.1.0 touch recovery (which, I believe, won't do any good' or bad' for my current problem).
2. Renamed the apk files using SystemCleanUp. Then' reinstalled the program. The results: no change, running QR opens the LG user document.
3. Cleaned the davik cache. (No change).
As to the AOSP installation, please refer me to a reliable howto reference. I've never installed a MOD on an android