Related
If you ...
find a bug or problem on 2.2, post here
find a solution on how to fix the bug, post here
want to get help on how to fix the bug, post here
anything else, goes here
This thread are meant for bug/problem solution and reported bug list of 2.2 custom ROM which i will try to manage, so people are not posting same bug, and asking for same solution all over again in X10 Custom ROM AOSP thread.
Limitation
Cannot Mount via USB
2.2 Custom ROM put the SYSTEM partition on your phone memory and the DATA partition in your SD card. That is why you cannot dismount the SD card from Android to mount to your PC.
No App2SD
2.2 Custom ROM is still running on 2.1 Custom Kernel which not supporting this.
Bug list
#0001 - WiFi not working - Fixed on 2.2
#0002 - Random android.process.media force close - Fixed on 2.2
#0003 - Home button not working, and no Lock Screen - Fixed on 2.2
#0004 - Cannot install certain APK (Angry Bird)
#0005 - No radio, no network and flashing Home - New on 0.0.2
#0006 - ADB shell have SU access, but Titanium Backup cannot work - New on 0.0.2
#0007 - SD Card non-ascii folder show as ???
#0008 - Facebook Contact Sync not available
#0009 - CPU Governor set to performance by default
Solutions for bugs
#0001 - How to enable WiFi on 2.2 Custom ROM
1. Try to enable WiFi, of course it will not work.. just do it.
2. WiFi will goes off automatically
3. Run
Code:
adb shell /system/bin/wlan_tool
4. If the adb stucks, just press CTRL+C
5. Repeat step 4 until you crash the phone
6. After reboot, your WiFi will work.
or
Code:
adb shell killall servicemanager
Post Reference
#0002 - android.process.media FC solution
0.0.1 compiled with prefilled databases which invalid for your phone
Code:
adb shell
cd /data/data/com.android.providers.media/databases
rm *
reboot
or this will ensure no invalid data anymore but will remove fixes for bug #0003
Code:
adb shell
cd /data/
rm -r data
mkdir data
reboot
Post Reference
#0003 - Fix Home Button & Lock Screen
Download sqlite here
First pull the db file first.
Code:
adb pull /data/data/com.android.providers.settings/databases/settings.db settings.db
Then add value to its content
Code:
sqlite3.exe settings.db
sqlite> INSERT INTO "secure" VALUES(67,'device_provisioned','1');
sqlite> .exit
Then push back the db
Code:
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
Then reboot.
Post Reference
#0004 - Solving installing APK problems
Currently the 2.2 Custom ROM does not support app2sd, and some APK may configure it self to be installed in sdcard.
So we force it to install on internal with code below
Code:
adb shell pm setInstallLocation 1
adb install -l com.rovio.angrybirds.apk
Post Reference
#0005 - Fixing radio, wifi and home screen flashing problem
Run this command
Code:
adb shell killall servicemanager
Post Reference
#0006 - Fixing SU access for Titanium Backup
Run this command
Code:
adb shell chmod 4755 /system/bin/su
Post Reference
#0007 - Fixing SD card mount command to show unicode letters
Modify your chargemon file so its enables utf8 for non ascii letter.
You need to do this on 2.1 ROM, not 2.2 ROM. The file is located in /system/bin
look for this
Code:
mount -t vfat -o rw,noatime,nodiratime /dev/block/mmcblk0p1 /sd
and change into this
Code:
mount -t vfat -o rw,noatime,nodiratime,utf8 /dev/block/mmcblk0p1 /sd
Notes:
You must use a Unix/Linux format capable text editor for this. Notepad will not work.
You can try ultraedit for it.
Post Reference
#0008 - Fix Facebook Sync
Download the ContactsProvider.apk here, then install to your Android using push command
Code:
adb push ContactsProvider.apk /system/app/ContactsProvider.apk
adb reboot
Post Reference
#0009 - Using SetCPU
By default is Performance, fast but wasting too much battery.
Use SetCPU and set to OnDemand.
Post Reference
2.2 Custom ROM FAQ
How and what happened if upgrade from 0.0.1 to 0.0.2?
Just copy data.img and system.img replacing your current one in FreeX10 folder.
This will replace all your 0.0.1 data, be sure to back up first with Titanium Backup
WiFi is running and connected, but cannot browser
This problem seems to be occurring on selected few.. You can set static IP to your android.
Go to Settings -> Wireless ... -> WiFi, then press menu button. From there you can se static IP
Is there a possibility of Timescape and Mediascape for 2.2 Custom ROM
The answer is yes, its possible.
I managed to install Mediascape.apk into 2.2 Custom ROM, but cannot run.
The reason it cannot run is because UX is using a lot of things in Framework-res.apk, images, layout, styles, and etc which cannot be copied directly from SE 2.1 into 2.2 AOSP. It requires someone to properly put all values, resolving conflicts inside Framework-res.apk before the UX can run, which will take months or at least weeks if someone dedicated his or her day job for it. Then after that we still need to deal with external files. So in conclusion, while it still possible, i don't think anyone will do it because of the time demanding process.
I want to help devs solving bugs, i found one but i don't know what actually happend.
While usb connected, from command prompt, type
Code:
adb logcat > logcat.txt
This will output a lot of debugging info into logcat.txt file, later if you find bug, you take a look inside the file.
See anything error or info related to the bug, and post here.. When writing the logcat.txt output, but them inside
Code:
brackets.
Do not post everything.. post few lines related to the bugs.
2.2 Custom ROM Testing Tools
Service Menu
WARNING: DO NOT INSTALL THIS UNLESS YOU DO DEVS, END USER DO NOT INSTALL
PURPOSE: MAYBE FOR TESTING DEVICE FEATURE, MIGHT BREAK SYSTEM APPS
Enable SE Service Menu for device testing. For devs only. You need to put adb stuff in the directory for install.bat to run.
Install framework
Code:
adb push permissions /system/etc/permissions
adb push lib /system/framework
adb reboot
Install applications
Code:
adb install app\bootinfo3.apk
adb install app\ServiceMenu2.apk
adb install app\com.laac.launcher.servicemenu.apk
Nice work. THis is handy
As i posted in the Main thread!
I think some of the force closes, (mainly acore and google framework) and the fact that the market crashes, come down to importing a vcard!
I imported vcard, get many force closes, market stops working, I clean install and don't install the vcard. Everything functions fine.
I do believe this is the reason!
Greeet ~~!! but can u tell me the seloution of this proplem :
i was run 2.2 001 ok ? then i back to to SE 2.1 to change old system.img & data.img by the new on FreeX10_alpha-release_0.0.2-UPDATE , ok ? then i reboot my phone into 2.2 , it run but like u make a refresh on computer ! evry 3 second !
thnx
Ahmed radi said:
Greeet ~~!! but can u tell me the seloution of this proplem :
i was run 2.2 001 ok ? then i back to to SE 2.1 to change old system.img & data.img by the new on FreeX10_alpha-release_0.0.2-UPDATE , ok ? then i reboot my phone into 2.2 , it run but like u make a refresh on computer ! evry 3 second !
thnx
Click to expand...
Click to collapse
Please read the main post!
sorry but no one answer me there
Thanks
Thanks for this ,hopefully a post like this is made for the 1st post on 2.1
http://forum.xda-developers.com/showpost.php?p=9134882&postcount=1
awesome thread, very helpful. Hopefully more people will read this rather than constantly posting the same bugs in the main thread.
Ahmed radi said:
sorry but no one answer me there
Click to expand...
Click to collapse
hey ahmed
grb el solution da
#0005 - Fixing radio, wifi and home screen flashing problem
Run this command
Code:
adb shell killall servicemanager
i think en da el 7l
bye
bsthost said:
hey ahmed
grb el solution da
#0005 - Fixing radio, wifi and home screen flashing problem
Run this command
Code:
adb shell killall servicemanager
i think en da el 7l
bye
Click to expand...
Click to collapse
i dont know how to use adb shell is there anythread for newbie user how to use adb ?
angry birds on my x10 is working well....i take it from a previous backup and restrored on 2.2 with mybackup pro
Please post to http://forum.xda-developers.com/showthread.php?t=835308&page=9999 thread instead.
We don't need to create two discussion thread.
i fixed the wifi and flashing problem and i have connected to wifi but i cant access internet or market any it seems i have connected to my modem netwok still cant access to internet any idea how to fix this?
17mayis said:
i fixed the wifi and flashing problem and i have connected to wifi but i cant access internet or market any it seems i have connected to my modem netwok still cant access to internet any idea how to fix this?
Click to expand...
Click to collapse
Code:
setprop ro.kernel.android.ndns 2
setprop net.eth0.dns1 8.8.8.8
setprop net.eth0.dns2 8.8.4.4
New crash this morning : i tried to connect my BT headphone after that i've activated BT => BT has desactivated itself then the phone reboots.
zephyrix said:
Code:
setprop ro.kernel.android.ndns 2
setprop net.eth0.dns1 8.8.8.8
setprop net.eth0.dns2 8.8.4.4
Click to expand...
Click to collapse
i appreciate your answer man if you could tell me how to do this ? through adb shell or something else?
17mayis said:
i dont know how to use adb shell is there anythread for newbie user how to use adb ?
Click to expand...
Click to collapse
Google is your friend!
i have flashPlayer10.1 problem it,s to slow when i play on any website any solution what might be ?
Want to save power when WiFi Tethering... try WiFi TXpower. You can find it here:
https://play.google.com/store/apps/details?id=rubberbibpepper.WiFiTxPower
Solution for missing IWCONFIG file:
1. Download the first attachment "iwconfig.txt" (default save location is '/mnt/sdcard/download')
3. Open 'File Manager'
a. Select: 'Menu' -> 'More' -> 'Settings' -> scroll down paste 'donate' (which you should do!)
b. Select: Mark Yes for both checkbox options of "Root Explorer" & "Mount System Folders"
3. Navigate your path over to '/mnt/sdcard/download' and find & rename the file "iwconfig.txt" to 'iwconfig'
4. COPY the file, and navigate your path over to '/system/xbin' and PASTE the file. It may say it wasn't pasted, but scroll down and the file will be there.
5. Launch busybox 'terminal emulator' and type these two commands:
# su
# chmod 755 /system/xbin/iwconfig
6. Boot up WiFi TXpower and verify that the iwconfig error message is gone, and that you do not get a 'iwconfig' permissions error. You should see "iwconfig" and "eth0" titles and all the signal and power stats listed in the app. Lower numbers, less range, and greater batter life.
7. Enjoy! If this has helped you, please hit the "Thanks" button below.
Backstory:
Problem is, this app needs a file 'iwconfig' to be installed in '/system/xbin' and this directory is R/O (read-only, write protected). There are a few ways to do this;
adb push to install the file
Find an APP that will install iwconfig for you
Symlink the file if its somewhere else
Copy & Paste File yourself
I'm old school, so I like to have a hard copy of the file anywhere its needed, and at 30.4 KB, who cares. So following the 80% help link below, I downloaded the 'iwconfig.tar' file, extracted the internal file, and started trying to copy it into '/system/xbin'. From this same site, I used fragments of commands in the busybox 'terminal emulator' to finish the install after the file was copied into the directory. I used '# chmod 755' to set the permissions on the new file, so WiFi TXpower could use it.
"Quoted from:
# su
# cd /mnt/sdcard/download — (this assumes the download location of the file)
# tar –xf iwconfig.tar — (this was to extract the single file from inside the tar file)
# mount –o rw,remount /system — (I couldn't get this command to work, but you can try next line below instead)
# mount -o remount,rw -t yaffs2 /system /system — ccdreadcc line of code, that looks like it would work, I received no terminal emulator errors when attempting.
# cp iwconfig /system/xbin — (Above didn't work, so I copy & paste this file in 'File Manager' as I couldn't get 'Root Explorer' to do it, it wouldn't R/W '/system')
# chmod 755 /system/xbin/iwconfig — (You will need this later to correctly set permissions on 'iwconfig', if you don't you will get a "permission denied" error in the WiFi TXpower App)
"
Helpful Links:
80% Help to figure this out, and will be quoting useful parts to solution:
http://jhanford.wordpress.com/2011/10/03/lowering-wi-fi-transmit-power-in-android/
20% Starting and finishing information for solution:
http://forum.xda-developers.com/showthread.php?t=1209251
Attached Files
Does anyone have this working on ICS or on an HTC Glacier MT4G?
My rom has the file needed, but I could not get it to show any type of config, then I tried this method and still nothing.
RUN IT
Working on VZW GS3! Thanks buddy for the help! BEEN LOOKING EVERYWHERE!
---------- Post added at 01:34 PM ---------- Previous post was at 01:11 PM ----------
What does iwmulticall do exactly? Would it benefit Galaxy S3 Wi-Fi or battery?
deep thoughts
zwieringa said:
Working on VZW GS3! Thanks buddy for the help! BEEN LOOKING EVERYWHERE!
---------- Post added at 01:34 PM ---------- Previous post was at 01:11 PM ----------
What does iwmulticall do exactly? Would it benefit Galaxy S3 Wi-Fi or battery?
Click to expand...
Click to collapse
I am running on a rooted sprint samsung S3, the app continues to show::
iwconfig:
Unknown id: wlan0.
when I select 4dBm, there is no indication it worked. In terminal I run iwconfig, and it shows that the setting took effect! My stock power is 1496, which seems to be my max. Selecting 11dbm works, but 18, 25 and 32 do not. I am guessing my wifi adapter will not allow anything over 1496.
If I had iw and ifconfig on my device I could try this to force a higher speed:
ifconfig wlan0 down
iw reg set BO<--------------is an o not a 0
ifconfig wlan0 up
iwconfig wlan0 channel 13
iwconfig wlan0 txpower 30
any suggestions how to pull this off.. I can install this on a debian destro, but there's no point to that... if I can get the iw and ifconfig on my andriod OS, maybe I can force it higher than 1496...
Tried this.. Surprisingly, it's also working on my Nexus 7 (2012) too..
Not that is requires wireless extensions.
Code:
[email protected]:/data/data/bcmon/misc $ ./iwconfig
lo no wireless extensions.
svnet0 no wireless extensions.
ifb0 no wireless extensions.
ifb1 no wireless extensions.
sit0 no wireless extensions.
ip6tnl0 no wireless extensions.
wlan0 no wireless extensions.
In last Samsung Aries kernel, it's one of these:
Code:
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
iwconfig has no effect on tx-power
This is great, thank you.
Unfortunately, when I followed all the instructions, got the iwconfig file from this thread, renamed it, successfully put it into system/xbin/, and then ran "iwconfig wlan0 txpower 2dBm" and then "iwconfig wlan0" the tx-power level is unchanged. It is still listed as 19 dBm. There's no error message.
Any ideas?
Does the "iwconfig [interface] txpower" command need to be run in a certain manner for it to have effect?
(I'm running a nightly build of Cyanogenmod 11 on a Moto G 4G.)
Yes, it's works on SGS4 i9506 4.4.2 after install iwconfig/iwmulticall. The signal is really changing, I see it when checking with other devices.
"iwconfig" shows txpower=31dbm for wlan0 (on other devices - S3, S5 and Tab - it shows 1496dbm)
I send command "iwconfig wlan0 txpower %%" with different values, but only 4, 11, 18, 25 and 31 works (yes, the last is not 32).
How can i increase it for better signal?
sorry for my english!
Thanks
Also I tried this:
iwconfig wlan0 sens -90
but
SET failed on device wlan0 ; Operation not supported on transport endpoint.
Is it needs orher diriver for wifi?
it doesn't work on lollipop
any ideas how to make it work on lollipop
Same here. Any solutions for Lollipop iwconfig?
error: only position independent executables (PIE) are supported.
how to fix this problem?
---------- Post added at 11:06 AM ---------- Previous post was at 10:46 AM ----------
kotaries said:
error: only position independent executables (PIE) are supported.
how to fix this problem?
Click to expand...
Click to collapse
Answering my own question:
You see this error because android doesnt want you to run old binaries on new version of system (as google explains, if I got the idea correctly)
To rebuild the binaries for new system is pretty complicated, so you can just fool the system by changing 17th byte in current (not working) binary file
Open some hex editor (online version for example: hexed.it), find the 17th byte (counting from 1, as humans do) and change it from 02 to 03
This byte (as I now see) is the first byte on 2nd string in the hex editor
Good luck
Try to edit, but the result "Segmentation Fault" :3
This must be the most asked question I have googled in a long time
There are so many results but nothing that resolves my dilemma
Without any tweaks I can access channel 13 via the router with my Xperia Ray running the latest nightly CM10
So whats the issue you may be asking, well this is the strange part
If I turn off the SSID of the router so it no longer broadcasts its name then the issue starts
My mobile will not connect to channel 13 thereafter it just disconnects
HOWEVER I have no issues with channels 1 - 12 with the SSID turned off
and certainly had no issues with Miui v4 with the same kernel installed
I have seen this happen with a few tablets but once the tablet has seen the network on channel 13 it was fine and then I could turn off the SSID
SO why do I need to turn off the SSID - because I prefer it was off in an area high with WiFi activity that's all
and I need to use channel 13 because of the high volume of wifi traffic in the area constantly changing there channels
Wifi 13 seems more stable and quicker anyhow I am in the UK and the routers in our street are all set to auto channel???????!!! why I dont know, but none use channel 13
So is there a solution to this very bizarre issue or am I going to have to leave my SSID on
SOLUTION Found thanks sirkay
Thanks to sirkay I can now access any hidden non broadcasting SSID wifi network
http://forum.xda-developers.com/showpost.php?p=23564367&postcount=5
A simple script that is supposed to enable extra channels actually fixed my issue with a hidden SSID
-----------------------------------------------------
Channel 13 issues
[ SOLUTION: To Enabled Wifi Channels 12-14 ]
1. using Root Explorer, goto /system/etc/init.d
2. open one of your init.d scripts, i suggest first in the list (Menu > Open in text editor)
3. paste line below
Code:
sqlite3 /data/data/com.android.providers.settings/databases/settings.db "INSERT INTO secure (name, value) VALUES ('wifi_country_code', 'JP');"
4. close and save
5. reboot
note: to enabled channel 12-13 just change "JP" to "EU" or "ES"
-------------------------------------------------------------------------------------------------------------------------------------------
I created a fresh file called 10wifi
and add these lines
#!/system/bin/sh
#
# Fix wifi channels 12 - 14
sqlite3 /data/data/com.android.providers.settings/databases/settings.db "INSERT INTO secure (name, value) VALUES ('wifi_country_code', 'EU');"
-------------------------------------------------------------------------------------------
I put the file into an install-able zip and added permissions to the update_script
set_perm(0, 0, 0777, "/system/xbin/10wifi");
NeilDownx said:
Thanks to sirkay I can now access any hidden non broadcasting SSID wifi network
http://forum.xda-developers.com/showpost.php?p=23564367&postcount=5
A simple script that is supposed to enable extra channels actually fixed my issue with a hidden SSID
-----------------------------------------------------
Channel 13 issues
[ SOLUTION: To Enabled Wifi Channels 12-14 ]
1. using Root Explorer, goto /system/etc/init.d
2. open one of your init.d scripts, i suggest first in the list (Menu > Open in text editor)
3. paste line below
Code:
sqlite3 /data/data/com.android.providers.settings/databases/settings.db "INSERT INTO secure (name, value) VALUES ('wifi_country_code', 'JP');"
4. close and save
5. reboot
note: to enabled channel 12-13 just change "JP" to "EU" or "ES"
-------------------------------------------------------------------------------------------------------------------------------------------
I created a fresh file called 10wifi
and add these lines
#!/system/bin/sh
#
# Fix wifi channels 12 - 14
sqlite3 /data/data/com.android.providers.settings/databases/settings.db "INSERT INTO secure (name, value) VALUES ('wifi_country_code', 'EU');"
-------------------------------------------------------------------------------------------
I put the file into an install-able zip and added permissions to the update_script
set_perm(0, 0, 0777, "/system/xbin/10wifi");
Click to expand...
Click to collapse
I copied the script and saw that actually in my settings.db the value wifi_country_code is correctly added, but my galaxy tab s with Blisspop rom still doesn't see the 13th channel...
someone can help me please?
tribio said:
I copied the script and saw that actually in my settings.db the value wifi_country_code is correctly added, but my galaxy tab s with Blisspop rom still doesn't see the 13th channel...
someone can help me please?
Click to expand...
Click to collapse
Have a look in your build.prop file and amend as below
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=13
now finally reboot and if it still fails you may need to change kernels......
I no longer have to bother with these settings as changing the kernel fixed my past issues
...Another solution
1. Turn off WiFi
2. Copy /data/misc/wifi/wpa_supplicant.conf to /sdcard
3. Rename /data/misc/wifi/wpa_supplicant.conf to /data/misc/wifi/wpa_supplicant.conf.old
4. Copy /sdcard/wpa_supplicant.conf to /data/misc/wifi
5. Edit /data/misc/wifi/wpa_supplicant.conf (using ES File Explorer) and remove the pmf=1 line
6. Save the file and make sure the permissions are appropriately set to rw-rw----, the owner is system and the group is wifi otherwise your WiFi will not turn on.
7. Reboot
8. Turn on WiFi
Found this solution on the CM12 errors list - lost of people having similar wifi issues
Tried to update build.prop and nothing change...
Opened wpa_supplicant.conf and there is not "pmf=1" written in the file..
I suppose I have to change kernels?
Thanks a lot for the help!!!
none of the above methods worked for me either
tribio said:
Tried to update build.prop and nothing change...
Opened wpa_supplicant.conf and there is not "pmf=1" written in the file..
I suppose I have to change kernels?
Thanks a lot for the help!!!
Click to expand...
Click to collapse
I seem to have the same problem. Did you resolve your issue? Thanks in advance.
nope!
working with CM12
tribio said:
nope!
Click to expand...
Click to collapse
I got fed up with this and decided to go all out and install Lollipop. I installed Installed Cyanogenmod (CM12) and then Temasek ROM port. I did this at home where the router is using a low channel number. I took the tablet to work and voila channel 13 was working. No need to mess with any wifi_country_codes. I am pretty sure it would work fine without the Temasek port. It might also have worked fine with CM10 or CM11. The disadvantage to this whole process is that I don't have the same spen functionality as stock. I'm still figuring out what apps to using for my "new" Note 10.1.
first thread, sorry if not in the right place.
I'm currently building a c# windows app that has a requirement of emptying out the sms inbox from an android devices.
I'm using RegawMOD.android lib to create and execute adb commands.
the first thought was to delete mmssms.db and reboot the device which works.
However, rebooting the device takes a lot of time.
so i took another approach :
- i copied the DB to the internal sd card
- pulled it to my pc
- accessed it with sqlite (through code) and emptied the sms table.
- copied it back to internal sd card.
- the problem is , with copying it back to /data/data/com.android.providers.telephony/databases/
when i try to run it inside the code , i get "permission denied" even though i run it with shell and su settings.
If i run the same code in adb shell on a command line prompt , it works perfectly.
this is the code :
Code:
AdbCommand MoveToData = Adb.FormAdbShellCommand(device, true, "cat", "/storage/sdcard0/download/mmssms.db > /data/data/com.android.providers.telephony/databases/mmssms.db");
help with the issue / suggesstions about a different approach would be much appreciated.
Thanks!
Well, i struggled for half a day relentlessly and finally got Reaver Working on my Xiaomi Mi4 android phone with a big help from the below mentioned link , everything is going good and fine, i got the Reaver app working on my Rooted app without bcmon and it worked and i'm ready to hack the network but just as i bypassed "Test Monitor" successfully(by loading a few scripts and debugging) and hit "Start Attack" this thing showed up, below i've written down the issue as it appeared since i'm not allowed to post screenshots & Links untill i make 10 posts(i'm a new user) and the scripts that i used to bypass Test Monitor are attached below, i'm basically a noob but good at technical things, the guide mentioned in the below link isn't as easy as it is told there, there are a few more steps that aren't added in the guide!!
HELP URGENTLY!!!! I waisted a whole day trying to get it working, i'd be so grateful :laugh: if you could help me out with it! PLEASE!! :crying:
Here are those scripts i loaded and put the phone on debug mode
Custom activation script:
#!/bin/bash
svc wifi disable
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
./enable_bcmon
echo “rfasuccess”
exit
Custom Warm-up Script
#!/bin/bash
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
Custom stop Script:
#!/bin/bash
svc wifi enable
echo “rfasuccess”
1. this happened first but i continued anyway.
Stdout:
"rfa success"
StdErr:
Control the Wifi manager
usage: svc wifi [enable[disable] Turn wifi on or off.
svc wifi prefer
set Wifi as the preferred data network
.//srart.shl[4]: sh :not found
.//start.sh[5]: cd: /data/data/com.bcmon.bcmon/files/tools : No Such File or Directory
./start.sh[6]: ./enable_bcmon : not found
2. and then this happened in the processing window
sh: <stdin>[3]: sh: not found
CANNOT LINK EXECUTABLE: could not load library "libcap.so.1" needed by "./reaver"; caused by library "libcap.so.1" not found
3. and finally when i hit stop, this message showed up
Stdout:
?rfasuccess?
StdErr:
Control the Wi-fi manager
usage: svc wifi[enable[disable]
Turn Wi-Fi on or off
svc wifi prefer
Set Wi-Fi as the preferred data network
These are the Steps i followed to get the monitoring mode done.
1.Download bcmon- (link)
2.Save the app on your sdcard but don’t install it.
3.download Reaver apk(RFA) and install it.- (link)
4.Download root explorer by speed speed software and install it.- (link)
6.Install and open bcmon app
keep it open for 5s and then press home.
(This will surely create a com.bcmon.bcmon folder in/Data/data)
7.Open root explorer and browse to the bcmon apk.
8.Select it and press view.
9.Open assets.
10.Copy all the files to /Data/data/com.bcmon.bcmon/files.
#If any file or folder of the same name is found then delete it#
/Now you’ll have to add custom scripts that I have given below(just copy them in a note editor and save with a .sh extension)
Start script-
Start script- mentioned above in custom start script
Warm script- mentioned above in custom warm up script
Stop script- mentioned above in custom stop script
#Now open root explorer
Browse to com.bcmon.bcmon/files/tools/reaver
Long press on it and press permissions and then check the execute boxes(all 3).now click OK.
Now in tools long press enable_bcmon and give it execute rights (all 3).now click OK .
#All set….now open reaver and scan for networks press on one with green color and with a good range.
Go to settings and monitor mode setting and unchek the use bcmon and load all the scripts properly.
#while loading scripts start.sh is the activation script,warm.sh is the warm up script and stop.sh is the stop script. #
Now scroll down and check the debugging mode.
#Go back to the attack screen and press test monitor mode.
Rfasuccess comes then press OK and press start attack.
#All done,now wait until it finds the routers key for you.
#This worked on my I ball slide 6318i,Alcatel ot 918n and redmi note.
goodpeace said:
Well, i struggled for half a day relentlessly and finally got Reaver Working on my Xiaomi Mi4 android phone with a big help from the below mentioned link , everything is going good and fine, i got the Reaver app working on my Rooted app without bcmon and it worked and i'm ready to hack the network but just as i bypassed "Test Monitor" successfully(by loading a few scripts and debugging) and hit "Start Attack" this thing showed up, below i've written down the issue as it appeared since i'm not allowed to post screenshots & Links untill i make 10 posts(i'm a new user) and the scripts that i used to bypass Test Monitor are attached below, i'm basically a noob but good at technical things, the guide mentioned in the below link isn't as easy as it is told there, there are a few more steps that aren't added in the guide!!
HELP URGENTLY!!!! I waisted a whole day trying to get it working, i'd be so grateful :laugh: if you could help me out with it! PLEASE!! :crying:
Here are those scripts i loaded and put the phone on debug mode
Custom activation script:
#!/bin/bash
svc wifi disable
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
./enable_bcmon
echo “rfasuccess”
exit
Custom Warm-up Script
#!/bin/bash
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
Custom stop Script:
#!/bin/bash
svc wifi enable
echo “rfasuccess”
1. this happened first but i continued anyway.
Stdout:
"rfa success"
StdErr:
Control the Wifi manager
usage: svc wifi [enable[disable] Turn wifi on or off.
svc wifi prefer
set Wifi as the preferred data network
.//srart.shl[4]: sh :not found
.//start.sh[5]: cd: /data/data/com.bcmon.bcmon/files/tools : No Such File or Directory
./start.sh[6]: ./enable_bcmon : not found
2. and then this happened in the processing window
sh: <stdin>[3]: sh: not found
CANNOT LINK EXECUTABLE: could not load library "libcap.so.1" needed by "./reaver"; caused by library "libcap.so.1" not found
3. and finally when i hit stop, this message showed up
Stdout:
?rfasuccess?
StdErr:
Control the Wi-fi manager
usage: svc wifi[enable[disable]
Turn Wi-Fi on or off
svc wifi prefer
Set Wi-Fi as the preferred data network
These are the Steps i followed to get the monitoring mode done.
1.Download bcmon- (link)
2.Save the app on your sdcard but don’t install it.
3.download Reaver apk(RFA) and install it.- (link)
4.Download root explorer by speed speed software and install it.- (link)
6.Install and open bcmon app
keep it open for 5s and then press home.
(This will surely create a com.bcmon.bcmon folder in/Data/data)
7.Open root explorer and browse to the bcmon apk.
8.Select it and press view.
9.Open assets.
10.Copy all the files to /Data/data/com.bcmon.bcmon/files.
#If any file or folder of the same name is found then delete it#
/Now you’ll have to add custom scripts that I have given below(just copy them in a note editor and save with a .sh extension)
Start script-
Start script- mentioned above in custom start script
Warm script- mentioned above in custom warm up script
Stop script- mentioned above in custom stop script
#Now open root explorer
Browse to com.bcmon.bcmon/files/tools/reaver
Long press on it and press permissions and then check the execute boxes(all 3).now click OK.
Now in tools long press enable_bcmon and give it execute rights (all 3).now click OK .
#All set….now open reaver and scan for networks press on one with green color and with a good range.
Go to settings and monitor mode setting and unchek the use bcmon and load all the scripts properly.
#while loading scripts start.sh is the activation script,warm.sh is the warm up script and stop.sh is the stop script. #
Now scroll down and check the debugging mode.
#Go back to the attack screen and press test monitor mode.
Rfasuccess comes then press OK and press start attack.
#All done,now wait until it finds the routers key for you.
#This worked on my I ball slide 6318i,Alcatel ot 918n and redmi note.
Click to expand...
Click to collapse
let me know as well if you find any solution.
i get frist error
Start .sh not found plzzz help me bro
Same here pal!
The person who posted this method is my frnd on FB , whenever I tried to connect he ignored my text.
Stucked at the same..
So I was having the same error as the couple people above me, but I was able to get Reaver to recognize where my files were. I moved it off of the SD card to: /data/data/com.bcmon.bcmon
Then I manually typed in the location path of my .sh files:
/data/data/com.bcmon.bcmon/start.sh
/data/data/com.bcmon.bcmon/warm.sh
/data/data/com.bcmon.bcmon/stop.sh
Obviously you'll want to put in whatever you named those files there.
So I've gotten past that hurtle. I am however stuck with this new set of errors now, although it will allow me to progress to "start attack".
I'm new so the site is preventing me from posting these links normally but here are the two errors I'm getting:
Code:
Stdout: rfasuccess
StdErr: Control the Wi-Fi manager
usage: svc wifi [enable|disable]
Turn Wi-Fi on or off
./data/data/com.bcmon.bcmon/start.sh[4]: sh : not found
./data/data/com.bcmon.bcmon/start.sh[5]: cd: /data/data/com.bcmon.bcmon/files/tools : no such file or directory
.data/data/com.bcmon.bcmon/start.sh[6]: ./enable_bcmon : not found
After this I am able to progress and next see:
Code:
tmp-mksh: <stdin>[3]: sh: not found
error: only position independent executables (PIE) are supported.
Any suggestions?
- HTC One M7vzw
PacMan Rom 5.1.1
Stucked at same place
:silly::silly:
Libcap.so.1 error please sort it out soon..
Does anyone managed to solve this?
Your scripts shebang points to /bin/bash you could try changing to #!/system/bin/sh which should hopefully solve the sh not found error. More recent android versions force pie executables as a tool to help lower hack risks, the option there is to try to bypass pie systemwide or get a pie executable. Libcap error is due to the file not being present I'm not sure if your app is supposed to include it but it's not a standard android library.
Hey please help can I use in Micromax canvas nitro A310
Err msg displayed... Plzzz help
:Hi, m a general user of an android phone (without much technical skills). I have tried the method suggested step by step for using Reaver Rfa without bcmon and it enabled monitor mode but after that a popup appeared, which was as followed (unable to attach screenshot)
Stdout:
StdErr:
bmon_wrapper_loaded
K_Shell/10118:1442:<Stdin>[4]:
iwconfig:not found
I am unable to understand it. Please help
goodpeace said:
Well, i struggled for half a day relentlessly and finally got Reaver Working on my Xiaomi Mi4 android phone with a big help from the below mentioned link , everything is going good and fine, i got the Reaver app working on my Rooted app without bcmon and it worked and i'm ready to hack the network but just as i bypassed "Test Monitor" successfully(by loading a few scripts and debugging) and hit "Start Attack" this thing showed up, below i've written down the issue as it appeared since i'm not allowed to post screenshots & Links untill i make 10 posts(i'm a new user) and the scripts that i used to bypass Test Monitor are attached below, i'm basically a noob but good at technical things, the guide mentioned in the below link isn't as easy as it is told there, there are a few more steps that aren't added in the guide!!
HELP URGENTLY!!!! I waisted a whole day trying to get it working, i'd be so grateful :laugh: if you could help me out with it! PLEASE!! :crying:
Here are those scripts i loaded and put the phone on debug mode
Custom activation script:
#!/bin/bash
svc wifi disable
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
./enable_bcmon
echo “rfasuccess”
exit
Custom Warm-up Script
#!/bin/bash
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
Custom stop Script:
#!/bin/bash
svc wifi enable
echo “rfasuccess”
1. this happened first but i continued anyway.
Stdout:
"rfa success"
StdErr:
Control the Wifi manager
usage: svc wifi [enable[disable] Turn wifi on or off.
svc wifi prefer
set Wifi as the preferred data network
.//srart.shl[4]: sh :not found
.//start.sh[5]: cd: /data/data/com.bcmon.bcmon/files/tools : No Such File or Directory
./start.sh[6]: ./enable_bcmon : not found
2. and then this happened in the processing window
sh: <stdin>[3]: sh: not found
CANNOT LINK EXECUTABLE: could not load library "libcap.so.1" needed by "./reaver"; caused by library "libcap.so.1" not found
3. and finally when i hit stop, this message showed up
Stdout:
?rfasuccess?
StdErr:
Control the Wi-fi manager
usage: svc wifi[enable[disable]
Turn Wi-Fi on or off
svc wifi prefer
Set Wi-Fi as the preferred data network
These are the Steps i followed to get the monitoring mode done.
1.Download bcmon- (link)
2.Save the app on your sdcard but don’t install it.
3.download Reaver apk(RFA) and install it.- (link)
4.Download root explorer by speed speed software and install it.- (link)
6.Install and open bcmon app
keep it open for 5s and then press home.
(This will surely create a com.bcmon.bcmon folder in/Data/data)
7.Open root explorer and browse to the bcmon apk.
8.Select it and press view.
9.Open assets.
10.Copy all the files to /Data/data/com.bcmon.bcmon/files.
#If any file or folder of the same name is found then delete it#
/Now you’ll have to add custom scripts that I have given below(just copy them in a note editor and save with a .sh extension)
Start script-
Start script- mentioned above in custom start script
Warm script- mentioned above in custom warm up script
Stop script- mentioned above in custom stop script
#Now open root explorer
Browse to com.bcmon.bcmon/files/tools/reaver
Long press on it and press permissions and then check the execute boxes(all 3).now click OK.
Now in tools long press enable_bcmon and give it execute rights (all 3).now click OK .
#All set….now open reaver and scan for networks press on one with green color and with a good range.
Go to settings and monitor mode setting and unchek the use bcmon and load all the scripts properly.
#while loading scripts start.sh is the activation script,warm.sh is the warm up script and stop.sh is the stop script. #
Now scroll down and check the debugging mode.
#Go back to the attack screen and press test monitor mode.
Rfasuccess comes then press OK and press start attack.
#All done,now wait until it finds the routers key for you.
#This worked on my I ball slide 6318i,Alcatel ot 918n and redmi note.
Click to expand...
Click to collapse
Please explain step by step on how you did this I'm stuck. Thanks.
BiteMyCAPTCHA said:
So I was having the same error as the couple people above me, but I was able to get Reaver to recognize where my files were. I moved it off of the SD card to: /data/data/com.bcmon.bcmon
Then I manually typed in the location path of my .sh files:
/data/data/com.bcmon.bcmon/start.sh
/data/data/com.bcmon.bcmon/warm.sh
/data/data/com.bcmon.bcmon/stop.sh
Obviously you'll want to put in whatever you named those files there.
So I've gotten past that hurtle. I am however stuck with this new set of errors now, although it will allow me to progress to "start attack".
I'm new so the site is preventing me from posting these links normally but here are the two errors I'm getting:
Code:
Stdout: rfasuccess
StdErr: Control the Wi-Fi manager
usage: svc wifi [enable|disable]
Turn Wi-Fi on or off
./data/data/com.bcmon.bcmon/start.sh[4]: sh : not found
./data/data/com.bcmon.bcmon/start.sh[5]: cd: /data/data/com.bcmon.bcmon/files/tools : no such file or directory
.data/data/com.bcmon.bcmon/start.sh[6]: ./enable_bcmon : not found
After this I am able to progress and next see:
Code:
tmp-mksh: <stdin>[3]: sh: not found
error: only position independent executables (PIE) are supported.
Any suggestions?
- HTC One M7vzw
PacMan Rom 5.1.1
Click to expand...
Click to collapse
Dude..
This is the same error that mentioned in the post
---------- Post added at 08:54 AM ---------- Previous post was at 08:53 AM ----------
10258Smoker said:
Libcap.so.1 error please sort it out soon..
Click to expand...
Click to collapse
find out libcap.so.1 from bcmon assets and put it on system/lib
How to copy bcmon files from rootex, there's no copy option, only extract.
goodpeace said:
Well, i struggled for half a day relentlessly and finally got Reaver Working on my Xiaomi Mi4 android phone with a big help from the below mentioned link , everything is going good and fine, i got the Reaver app working on my Rooted app without bcmon and it worked and i'm ready to hack the network but just as i bypassed "Test Monitor" successfully(by loading a few scripts and debugging) and hit "Start Attack" this thing showed up, below i've written down the issue as it appeared since i'm not allowed to post screenshots & Links untill i make 10 posts(i'm a new user) and the scripts that i used to bypass Test Monitor are attached below, i'm basically a noob but good at technical things, the guide mentioned in the below link isn't as easy as it is told there, there are a few more steps that aren't added in the guide!!
HELP URGENTLY!!!! I waisted a whole day trying to get it working, i'd be so grateful :laugh: if you could help me out with it! PLEASE!! :crying:
Here are those scripts i loaded and put the phone on debug mode
Custom activation script:
#!/bin/bash
svc wifi disable
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
./enable_bcmon
echo “rfasuccess”
exit
Custom Warm-up Script
#!/bin/bash
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
Custom stop Script:
#!/bin/bash
svc wifi enable
echo “rfasuccess”
1. this happened first but i continued anyway.
Stdout:
"rfa success"
StdErr:
Control the Wifi manager
usage: svc wifi [enable[disable] Turn wifi on or off.
svc wifi prefer
set Wifi as the preferred data network
.//srart.shl[4]: sh :not found
.//start.sh[5]: cd: /data/data/com.bcmon.bcmon/files/tools : No Such File or Directory
./start.sh[6]: ./enable_bcmon : not found
2. and then this happened in the processing window
sh: <stdin>[3]: sh: not found
CANNOT LINK EXECUTABLE: could not load library "libcap.so.1" needed by "./reaver"; caused by library "libcap.so.1" not found
3. and finally when i hit stop, this message showed up
Stdout:
?rfasuccess?
StdErr:
Control the Wi-fi manager
usage: svc wifi[enable[disable]
Turn Wi-Fi on or off
svc wifi prefer
Set Wi-Fi as the preferred data network
These are the Steps i followed to get the monitoring mode done.
1.Download bcmon- (link)
2.Save the app on your sdcard but don’t install it.
3.download Reaver apk(RFA) and install it.- (link)
4.Download root explorer by speed speed software and install it.- (link)
6.Install and open bcmon app
keep it open for 5s and then press home.
(This will surely create a com.bcmon.bcmon folder in/Data/data)
7.Open root explorer and browse to the bcmon apk.
8.Select it and press view.
9.Open assets.
10.Copy all the files to /Data/data/com.bcmon.bcmon/files.
#If any file or folder of the same name is found then delete it#
/Now you’ll have to add custom scripts that I have given below(just copy them in a note editor and save with a .sh extension)
Start script-
Start script- mentioned above in custom start script
Warm script- mentioned above in custom warm up script
Stop script- mentioned above in custom stop script
#Now open root explorer
Browse to com.bcmon.bcmon/files/tools/reaver
Long press on it and press permissions and then check the execute boxes(all 3).now click OK.
Now in tools long press enable_bcmon and give it execute rights (all 3).now click OK .
#All set….now open reaver and scan for networks press on one with green color and with a good range.
Go to settings and monitor mode setting and unchek the use bcmon and load all the scripts properly.
#while loading scripts start.sh is the activation script,warm.sh is the warm up script and stop.sh is the stop script. #
Now scroll down and check the debugging mode.
#Go back to the attack screen and press test monitor mode.
Rfasuccess comes then press OK and press start attack.
#All done,now wait until it finds the routers key for you.
#This worked on my I ball slide 6318i,Alcatel ot 918n and redmi note.
Click to expand...
Click to collapse
Could anyone tell me how to copy bcmon assets files from sd card to data, because all the options says is extract.
Please help meeee...!
Possible Fix for libcap.so.1 problem
By moving "libcap.so.1", "libsqlite3.so.0" from "/data/data/com.bcmon.bcmon/files/libs" to "/system/lib" and setting the wifi-interface in the "Monitor-Mode settings" to "wlan0". I was able to solve the "libcap.so.1" error.
Straight afterwards, I got the "<stdin>[3] : not found" error.
By changing the "start.sh" script from :
Code:
#!/bin/bash
svc wifi disable
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
./enable_bcmon
echo “rfasuccess”
exit
--to--
Code:
#!/bin/bash
svc wifi enable
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
./enable_bcmon
echo “rfasuccess”
exit
I was able to pass the "<stdin>[3] : not found" error but now it is stuck on "Waiting for beacon from <Mac Address here>".
I've tried multiple router and waited around 15 minutes on that screen for each router with my phone next to them but it will not get pass that line.
Galaxy s3 i9300 here.
script errors
start.sh, warm.sh and stop.sh are not functioning properly, I am stuck at the same stage as you are and a can't even run the scripts on the terminal emulator.
I have tried granting permissions to the scripts but is is giving errors, if you enable "debug mode", you will see that not even one command is being issued without errors.
BatDroid said:
After this I am able to progress and next see:
Any suggestions?
- HTC One M7vzw
PacMan Rom 5.1.1
Dude..
This is the same error that mentioned in the post
---------- Post added at 08:54 AM ---------- Previous post was at 08:53 AM ----------
find out libcap.so.1 from bcmon assets and put it on system/lib
Click to expand...
Click to collapse
How do I fix the PIE problem? I'm using a Moto E LTE Surnia with CM13.
I cant copy files from extracted folder/asset folder of "bcmon" from any root explorer even from premium root explorer by speedspeed software. Please help me with this. Thank you in advance.
No app in market that can hack wifi password.
Don't waste time.
New wifi routers have WPA 2PSK highest security current time. To crack this type of password may take 2 mintues to many of years depend on which type of character and length have been chosen. All the procedure of cracking password done on linux platform.
In my opinion there are lots of apps on playstore are fake promising to crack wifi password.
Because wifi wpa2psk generate new reandoms keys with 24 or more characters changes with time to time (2-5 sec). And this keys doesn't not save in android in any way. So, how can you say this app hack wifi passwords.
If wifi router has WEP protected security then it can be easily cracked in 2 min any password.