http://blog.clove.co.uk/2014/09/10/...eless-charging-wcr14-wireless-charging-cover/
Now will it come out is the question (unlike the Z2 one)
Sent from my GT-I9505G
jonshipman said:
http://blog.clove.co.uk/2014/09/10/...eless-charging-wcr14-wireless-charging-cover/
Now will it come out is the question (unlike the Z2 one)
Sent from my GT-I9505G
Click to expand...
Click to collapse
Makes the device look abit thick imo?
Of course, it's a flip case.
Sent from my GT-I9505G
If only they could release a back only cover with qi charging. Not a fan of the book style cases
QI charging with such a big battery will end in 6+ hours from 0-100% as the QI Charging current is restricted.
Bäcker said:
QI charging with such a big battery will end in 6+ hours from 0-100% as the QI Charging current is restricted.
Click to expand...
Click to collapse
the whole point is to avoid messing with the flaps too much (when you have to plug/unplug microUSB cable) to avoid unnecessary wear & tear...
it takes maybe 2-3 hours to charge my nexus 5(2300mAh) on Qi, probably 3-4 for the z3 (3100mAh)
Yeah, I now. But our Z3 offers a magnetic charging port - which also allows full charging current and this adds no bulk
Also you can charge everywhere and only have to carry a small cable instead of a bulkier QI charger. Or you chan use a dock, whatever you prefer.
Bäcker said:
Yeah, I now. But our Z3 offers a magnetic charging port - which also allows full charging current and this adds no bulk
Also you can charge everywhere and only have to carry a small cable instead of a bulkier QI charger. Or you chan use a dock, whatever you prefer.
Click to expand...
Click to collapse
Well, the point of Qi is that it's universal. E.g. a Nexus charger will work with a Lumia, will work with a GS4. Z2 and Z3 can't even use the same dock.
I get why Sony used the magnetic charger, the thinnest qi coils are still around 1mm. When the phone is 7.3mm thick, it adds up. But personally, I wouldn't mind a thicker phone, but I understand their reasoning.
I absolutely agree. If QI was readily available for most battery operated devices that would be very convenient. As it is now it does not matter if you buy a magnetic charger or QI, because you have to buy each for your phone.
The Z2 dock works for the Z3 - no problem there.
I'm torn between this and the Style Up cover with the window. I don't see why they couldn't add the smart cover functionality to the Qi case. I upgraded from a Nokia Lumia and I have a couple of wireless chargers at home that I was hoping to continue using.
Then again, this Qi case costs more than the Style Up cover and the dock combined!
The style up cover has been delayed until November 4th according to an email I got from Amazon today.
I did look at the Qi charger for the Z2 but it was/is quite ugly and bulky. So it's mag charger for me. One dock and two plain magnetic connector cables.
I have two Qi charging plates and they're already quite busy charging a N7, G3 and 1520. And they do all take a long time to charge, and the N7 charges to full and then just starts to drain without ever topping up again. So leave it for a few days and it will have charged and then drained. No such problems with the magnetic connector.
paperWastage said:
the whole point is to avoid messing with the flaps too much (when you have to plug/unplug microUSB cable) to avoid unnecessary wear & tear...
it takes maybe 2-3 hours to charge my nexus 5(2300mAh) on Qi, probably 3-4 for the z3 (3100mAh)
Click to expand...
Click to collapse
My G3 takes 2.5 hours from 2%-100% with a 3000mah battery. Qi charging is fairly fast if you use a 1A output qi charger
USA's Verizon exclusive Z3v has QI built-in, that's actually prety useful if you ask me. I use the magnetic charging on my Z1 but QI would probably be more convenient. Too bad Brazil's model doesn't seem to come with this feature. I just don't get it, why put in on Verizon's model but not on global's. Maybe I'll just stick with my Z1 for longer and get the Z4 when it comes out (hopefully with QI built-in and optical image stabilization)
FelipeRRM said:
USA's Verizon exclusive Z3v has QI built-in, that's actually prety useful if you ask me. I use the magnetic charging on my Z1 but QI would probably be more convenient. Too bad Brazil's model doesn't seem to come with this feature. I just don't get it, why put in on Verizon's model but not on global's. Maybe I'll just stick with my Z1 for longer and get the Z4 when it comes out (hopefully with QI built-in and optical image stabilization)
Click to expand...
Click to collapse
I don't quite understand that as well. Why does only the Verizon one have it? Maybe they are saving it for the Z4 or they just don't want to implement it into the Z3 that is already in production. I heard that the Z3v is a bit thicker than the regular Z3 because of the Qi Charging.. Besides that, I guess you can get the Charging dock fr the z3 instead. Either way, you won't have to remove the flaps so I guess it works. If the Verizon Z3 had international bands, I'd purchase that one instead (unless the carrier is branded all over the phone).
Verizon will most likely brand the hell out of it. Verizon is also CDMA, not GSM. won't work outside of the states.
I thought all of verizon's LTE phones are unlocked for their sim cards....?
buda81 said:
Verizon will most likely brand the hell out of it. Verizon is also CDMA, not GSM. won't work outside of the states.
Click to expand...
Click to collapse
VZ LTE phone has CDMA for voice and GSM for LTE data. GSM portion is NOT locked.
pomtouch said:
I thought all of verizon's LTE phones are unlocked for their sim cards....?
Click to expand...
Click to collapse
Sent from my SGP561 using Tapatalk
ngvuanh said:
VZ LTE phone has CDMA for voice and GSM for LTE data. GSM portion is NOT locked.
Click to expand...
Click to collapse
That's good to know.
Bäcker said:
QI charging with such a big battery will end in 6+ hours from 0-100% as the QI Charging current is restricted.
Click to expand...
Click to collapse
It wont... because the magnetic charge connector on the Xperia Z3 can only receive power and cannot communicate. So there is no way it can detect if a magnetic charger is connected or a Qi chargepad.
Im searching the web for weeks now trying to find a bumper for my Z3 with Qi over magnetic connectors. I dont understand why companies did not come up with that allready. It wouldnt add any more thickness to the bumper, and you could easily charge 1000 mAh. In wich the Phone will charge in 3 to 4 hours i guess. Thats great when charging over night.
I see were you are comming from. The culprit is the QI charging pad output, so you are still left with that low current.
Related
One of the things I was really excited about with the Lumia 920 was the built in wireless charging feature. Since the Nokia charging plate was selling for about 70 bucks (ouch) I decided to see what alternatives were available. I've tried two different wireless chargers so far with mixed results:
LG Electronics WCP-700 - This charger works great and I was able to snag it from amazon for 35 bucks shipped. If you want wireless charging but don't want to pay 70 bucks for one charger, then I highly suggest this model. You can get 2 for the price of one Nokia Charger.
Powermat 2x - I was hoping the community could give me some advice on the powermat. Naturally if you plug the powercube into the phone, it will charge just fine. BUT I noticed that if you put a charging plate on the charger and then put the 920 on top of it, the 920 will begin to go into charging mode, although when i tried doing that, it didn't really seem to be charging at any noticeable rate( I may have been taking the phone off the charger too frequently though). Does anyone know exactly what voltage and amperage the powermat wirelessly charges at? My concern is that the volts or amps will be off and damage could be done to the battery in my lumia 920. Any thoughts?
Good questions! I was wondering the same thing about the different mats out there.
What about the Energizer one?
Also, the LG one apparently beeps a lot...does it do so with the Nokia? When it finishes charging it turns off and lets the phone run off battery for a bit, then turns back on to top it off again, causing it to beep each time it turns on throughout the night. Have you noticed this?
LudoGris said:
Good questions! I was wondering the same thing about the different mats out there.
What about the Energizer one?
Also, the LG one apparently beeps a lot...does it do so with the Nokia? When it finishes charging it turns off and lets the phone run off battery for a bit, then turns back on to top it off again, causing it to beep each time it turns on throughout the night. Have you noticed this?
Click to expand...
Click to collapse
From what I've read, the Energizer QI chargers will work fine with the 920, I just didn't get one since the LG model was a bit cheaper. The LG one does beep, although I haven't found it to be too much of an issue. When I place the phone on the charger, the LG mat will beep and show the green charging icon, and my phone will make the connection noise. I also think the mat will beep occasionally when the phone is charged, since it lets the battery drain a bit, then starts charging again, although last night it didn't wake me up at all while I slept. You could probably remove the speaker from the LG pad fairly easily, although from my experience, it's not bothersome enough to be worth the trouble.
beebop483 said:
One of the things I was really excited about with the Lumia 920 was the built in wireless charging feature. Since the Nokia charging plate was selling for about 70 bucks (ouch) I decided to see what alternatives were available. I've tried two different wireless chargers so far with mixed results:
LG Electronics WCP-700 - This charger works great and I was able to snag it from amazon for 35 bucks shipped. If you want wireless charging but don't want to pay 70 bucks for one charger, then I highly suggest this model. You can get 2 for the price of one Nokia Charger.
Powermat 2x - I was hoping the community could give me some advice on the powermat. Naturally if you plug the powercube into the phone, it will charge just fine. BUT I noticed that if you put a charging plate on the charger and then put the 920 on top of it, the 920 will begin to go into charging mode, although when i tried doing that, it didn't really seem to be charging at any noticeable rate( I may have been taking the phone off the charger too frequently though). Does anyone know exactly what voltage and amperage the powermat wirelessly charges at? My concern is that the volts or amps will be off and damage could be done to the battery in my lumia 920. Any thoughts?
Click to expand...
Click to collapse
Doesn't the PowerMat use a different wireless charging standard? I thought I read somewhere it wasn't the QI standard.
PowerMat is its own standard.
Not sure where you are, but the plate is $50 and the stand is $70 here.
Might want to try mail-order?
As for other plates, I have a few lying around, but I don't want to risk my phone trying them without knowing. I have 2 plates and a stand, so I am pretty covered.
Philips DLP7210B/10 also works with the Lumia 920.
I ordered a Palm Touchstone off Amazon for $6 and free shipping. I'll know in a few days when it gets here if it works or not, but I read somewhere that it should.
Sorry to disappoint you, but the Touchstone does not work. It makes the charging notification sound, but the battery still drains; it doesn't charge at all.
I have the Maxell Airvolt QI charger. It works but the phone seems to get warm unlike the Fatboy charger I use at night.
jhoff80 said:
Sorry to disappoint you, but the Touchstone does not work. It makes the charging notification sound, but the battery still drains; it doesn't charge at all.
Click to expand...
Click to collapse
Doh!
I really hope someone makes a 12v charging pad to keep in your car. Plug into the cig lighter and lay the phone on the "pad" somewhere in the car. I know the new dodge cars have it as an option now.
john94si said:
I really hope someone makes a 12v charging pad to keep in your car. Plug into the cig lighter and lay the phone on the "pad" somewhere in the car. I know the new dodge cars have it as an option now.
Click to expand...
Click to collapse
There's no reason why a 12v adaptor of sufficient ampage wouldn't work. Just match up the plug and polarity to the DC adaptor that comes with the charging pad.
But obviously a QI charger is not designed for use in a car. QI only recently release their guidelines:
http://www.wirelesspowerconsortium....ermarket-chargers-v-10.pdf?force-download=yes
It seems there are two current wireless charging standards: QI and PMA
Powermat are PMA, and this is a copyrighted licensed standard, i.e., Powermat will get revenue/license on each device. There is a limited trial in Starbucks.
QI is open, and I think a "free" standard. They have public charging spots in Japan, and Japanese handsets are predominantly QI
This is all just what I've recently read, so I'm not an expert or utterly certain it is correct, but it does seem that Nokia 920's are to the QI standard, and so any QI charging plate should work...?
gilesjuk said:
There's no reason why a 12v adaptor of sufficient ampage wouldn't work. Just match up the plug and polarity to the DC adaptor that comes with the charging pad.
But obviously a QI charger is not designed for use in a car. QI only recently release their guidelines:
Click to expand...
Click to collapse
I personally plan to do just this. I figure a Qi compatible charger hard wired into the car, then find a good place to mount it with a thin grip pad covering it. It should work just fine.
SuperSport said:
I personally plan to do just this. I figure a Qi compatible charger hard wired into the car, then find a good place to mount it with a thin grip pad covering it. It should work just fine.
Click to expand...
Click to collapse
Make sure you post pictures when you do this.
Sent from my RM-820_nam_att_100 using Board Express
SuperSport said:
I personally plan to do just this. I figure a Qi compatible charger hard wired into the car, then find a good place to mount it with a thin grip pad covering it. It should work just fine.
Click to expand...
Click to collapse
Ooooo, my Edge has a little 'shelf' under the console that has a ribbed rubber bottom. And it has a 12v plug right beside it. I bet my husband (the engineer) might be able to wire up a charging plate. He would need to shorten the cord so it wouldn't flop around. But he's very good at that sort of thing.
This is a great idea! He works overseas but I think I have a new 'honey-do' for him on his next R&R. Thanks!
beebop483 said:
Any thoughts?
Click to expand...
Click to collapse
Anything that is a Qi charger should work, it's a standard.
http://en.wikipedia.org/wiki/Qi_(inductive_power_standard)
I have an Everyready Qi charger, the 920 and it are happy as clams together.
schettj said:
Anything that is a Qi charger should work, it's a standard.
http://en.wikipedia.org/wiki/Qi_(inductive_power_standard)
I have an Everyready Qi charger, the 920 and it are happy as clams together.
Click to expand...
Click to collapse
Nice! I'll get one too!
tabletop charging
I personally think it would be awesome to be able to integrate QI wireless charging into a tabletop. think about it, when you sit down at a table for dinner, you usually take your phone out of your pocket, right? what if you could charge it while you eat? why doesn't starbucks do this?:highfive:
I ordered mine this morning!! YAY
The first thing I'm going to do is work on plans for doing a Qi Wireless charging case. I figured I would use a thick piece of wood (or 3D printed piece of plastic ) as the "case" with a cut out for the Qi parts salvaged from something found on eBay or Amazon (from a iPhone charge case etc) and connect it all via the magnetic charge port. What I was hoping to figure out is if anyone knows the positive or negative sites on the magnetic charge connector?? Or does it even matter?
I know this project will add some bulk to the already large device, but I really would like wireless charging as I have fallen in love with it!!
Thanks in advance!
David
One thing to factor in mind is the slow charging rates with wireless charging.
With the quick charge function on the S800, you can probably go from 0-100 in 2hours. Whereas with wireless charging it could take 8+ hours. Great if you just want to leave it on your desk at work I guess, but from personal experience with modding the note 2 to be wireless charging compatible, it was rarely a practical as I always used the cable > wireless.
liqn7 said:
One thing to factor in mind is the slow charging rates with wireless charging.
Click to expand...
Click to collapse
I pretty much use wireless charging exclusively with my Nexus 4 and I have never had a problem with it.
Thanks for the reply though!!
David
So, part of the reason i bought this phone was the built in wireless charging. Well it was a big surprise to me [emoji30]when i got my new Qi charger today, and it wouldn't work. I never thought that it wouldn't be built into the battery cover.
So has anyone found a inexpensive, not the ebay 120.00 battery cover, way to add the charging into backs that came with our phones?
You can get the Verizon Wireless Charging Circle case for 59.99
Well, looking for a replacement back or just the qi receiver sticker, I'm not a fan of the flip cases.
Boltons75 said:
Well, looking for a replacement back or just the qi receiver sticker, I'm not a fan of the flip cases.
Click to expand...
Click to collapse
I feel the same way. I don't want the circle case, but i really want Qi charging. I guess we will have to wait for them to release a Qi charging backplate only.
Guess this is what i get for getting a phone on day 1 that it's available. I just wish that they would have come out of the box ready to go. Wondering if we can modify one of the adapters from another model phone to work temporarily?
http://www.amazon.com/gp/aw/d/B00CU...807c1a069f4f45&pi=SL500_SS115#ref=pd_aw_sbs_6
I'm thinking with minimal tweaking this could be made to work.
Boltons75 said:
http://www.amazon.com/gp/aw/d/B00CU...807c1a069f4f45&pi=SL500_SS115#ref=pd_aw_sbs_6
I'm thinking with minimal tweaking this could be made to work.
Click to expand...
Click to collapse
How does it interface with the phone (both this pad and the G3)? Does it have pins on the case and battery cover?
Yes there are 4 pins on the phone case that should connect to the battery door, but only the two for nfc are being used. My thought, i could easily make an adapter to connect if needed. Minimal soldering to the temp receiver coil.
This is the best mat you can find right now.
The Powermat by Duracell works well and charges just as fast as the USB charger or the tablet dock . I picked one up on amazon brand new for about $18 ( plenty still around
I picked up the 4s and portable charger bundle for a steal. This is using the standard backplate that came with the phone. Many cell phone reps will tell you the phone doesn't come standard with wireless charging and try to sell you the folio as a "wireless charging bundle" for $70,don't be fooled!.
Alignment is good, natively the Duracell branded cases and portable charger have a magnetic pull to the phone to keep it in place. When placing the PadFone on the plate there is no magnetic pull. Make sure you lay evenly. The wireless charger will make a beep to let you know it has a handshake with the device.
Works flawless so far, no complaints.
Update #1 Turns out the Padfone X is only PMA compliant, This wireless charger is apparently one of the only ones available. There are different styles of powermat available. But no Qi compliance.
Update #2 This kit also came with the iPhone 4/4s adapter and a PowerBar, the power back can be attached to either a Padfone Tablet station or the Asus Bluetooth Padfone keyboard to provide "passthrough" charge.
Sent from my ASUS PadFone X using XDA Premium 4 mobile app
Thanks for posting this review! I just ordered the exact same thing from Amazon yesterday and I wasn't sure if it was going to work. I was completely skeptical since just the Powermat is normally $50 through at&t.
Grab one at that price while you still can, less than $20 got me this whole set
8125Omnimax said:
Grab one at that price while you still can, less than $20 got me this whole set
Click to expand...
Click to collapse
Thanks for the heads up. Just picked up my new padfone X tonight after my beloved skyrocket fell and broke the screen. The rep thought the same thing about the wireless charging that I needed a wireless case. I asked to test out the 50 dollar duracell charging pad and sure enough "beep" and I was charging with just the phone out of the box. Nice find. This is a win win cause I also have an iphone 4s for my afterhours phone support for my job. Utter win here.
Thanks again.
:victory::victory::victory::victory::victory::victory::good:
Powermat charges fast but alignment is finicky
I also bought the iphone 4 powermat bundle from Amazon. I do like the audible and visual confirmation you get when it starts charging the device. Also it beeps when the device is fully charged. But overall you need to place the phone just right on the pad otherwise it beeps on and off and you end up taking extra time just to make sure it's charging. I owned a Nexus 5 before my Padfone and QI charging is a lot better you just drop the phone on the pad and it charges no problem never had to adjust the phone for it to charge.
But I waited forever for the Padfone to hit the US, so I can live with the charging issue.
After a while you figure out the sweet spot for charging hence the phone doesn't magnetically lock to the powermat, but when you connect, you'll have a full charge in no time
I also purchased the Duracell Powermat and it charges the phone fine, however one problem I have is that it seems to Overcharge the phone. I know this because of two things
1. "Battery Doctor" App reports that the phone had been overcharged
2. Phone is very warm/borderline hot to touch when I pull it off the charger in the morning
Has anyone else experienced this problem? I am concerned because overheating shortens the battery life of these phones so I want to prevent that. this does not happen when I charge via USB.
Battery doctor app is not a good representation for phones that support qi or pma charging. The phone will get warm, but not alarmingly warm. The science of contactless charging.
These are still available for under $20 with free shipping, looks like. A great buy for sure.
I received mine before I ever even got my PadFone X. With the issues arising theoretically being theoretically linked to charging the phone and station together for long periods, this frees up the included charger to charge the station by itself.
Can't thank the OP enough for passing on this find!
Just my two cents, but....
8125Omnimax said:
Update #1 Turns out the Padfone X is only PMA compliant, This wireless charger is apparently one of the only ones available. There are different styles of powermat available. But no Qi compliance.
Click to expand...
Click to collapse
I have an old Samsung Qi wireless charging pad, and my Padfone S works with it. I will admit, the powermat charger is much faster - but Padfone S does support Qi chargering pads. Not sure about Padfone X.
8125Omnimax said:
The phone will get warm, but not alarmingly warm. The science of contactless charging.
Click to expand...
Click to collapse
I'm not noticing this issue with my Padfone S. In fact, my old Samsung phone (Qi standard) did get warm, but Padfone S doesn't.
For that matter, my Padfone S doesn't heat up when I have it tethering a wifi data connection to my laptop or other portable devices. I've only felt my Padfone S heat up on 2 occasions - both of which I was in a dead zone and the phone was powering up the antenna to try to get a signal.
Magnetic USB Charging Cable, some one will try it?
http://dx-box.com/high-performance-...e-magnetic-connection-and-charging-speed.html
I will not touch a third party charger. I want to buy the DK30/Dk31 dock and take it apart for the EC21 cable but I'm not sure if its compatible? Does Somebody know maybe?
The page doesn't load for me, but I'd trust the microUSB -> Magnetic convertors over the entire charger. That way you can use the OEM charger or another high quality charger.
A lot of brandless chargers are made lower quality and that can lead to issues where phones "explode". Odds are, whenever you read about a person's phone exploding they were probably using a knockoff charger.
The adapters shouldn't be a problem. It's just a simple wire-to-wire exchange. No circuits.
Something like this
http://www.amazon.com/Magnector-Per...1144360&sr=8-1&keywords=magnetic+charger+sony
EDIT: I got a kick out of "Reverse Attachment Charging Protection", because the charging holes are just different sizes.
My Z1 magnetic charging cable works although it is a tad more easy to dislodge compared to when I was using it on my z1
I have THIS http://www.clove.co.uk/microusb-to-magnetic-connector-adapter and I must say it doesn't work perfectly. The adaptater doesn't 'grip', it stays in place only if you put you Z3 down.
jonshipman said:
A lot of brandless chargers are made lower quality and that can lead to issues where phones "explode".
Click to expand...
Click to collapse
OF COURSE. There are phones exploding just everywhere; you just cannot leave the house without ear protectors because there's exploding phones all around you.
Honestly; I am so sick of reading that "exploding phone" stories over and over. Same with stolen kidneys and similar paramountly believable urban legends.
Is this the charger wich comes with z3 in box ?
Quick Charger EP881
I cant find spec for this,is this the 2A or 1.5A ?
fain2daniel said:
Is this the charger wich comes with z3 in box ?
Quick Charger EP881
I cant find spec for this,is this the 2A or 1.5A ?
Click to expand...
Click to collapse
believe its 1.5A based on the same code found on other sony country sites.
http://www.sony.com.sg/product/ep881
however, lazy to check if its the same model that comes with the Z3 although i believe it should be!
This is the one my Z3 came with. T-mobile Netherlands model.
^
This is 2.5A fast charger wich is great.How much time it needs to 100% charge the battery?Im geting mine tomorrow,hope that comes with same charger.
I'm pretty sure it is 1,5A. Charged my device only once with it and I was surprised with the speed. Will do a timed run next time round.
fain2daniel said:
^
This is 2.5A fast charger wich is great.How much time it needs to 100% charge the battery?Im geting mine tomorrow,hope that comes with same charger.
Click to expand...
Click to collapse
the picture clearly reads 1500mA and that's what it is. This charger was included with my z3 as well.
2.30h to fully charge the batery with original 1.5A charger.Its not so bad.
EP880 is 1.5A, and is what came with my Z3. I'm intrigued to know what the 881 is.
In fact, given its support of Quick Charge 2.0, I am hopeful of Sony releasing a new PSU that can detect a QC2 compatible device and up the power further. So far I can only find one from Motorola and it's not on sale outside the US (that I can see).
Hi All,
Thought I'd give my review of two different magnetic cables I've purchased from my Xperia Z3.
Firstly, I purchased a £3 magnetic cable from Ebay which was utterly a waste of money! Soon as you picked the phone up or touched it the connection port would move up or down. I contacted the seller who is sending me a replacement so will see if this is any better.
Now on to the more expensive magnetic cable but with a twist.
This magnetic cable I purchased from Amazon had great reviews from previous Z2 users. Now I wasn't sure if it was Z3 compatible but turned out the ports are the same for Z2 and Z3. So I purchased the item from Flubit as you get a little discount if they can get a deal for you and it arrived within 2-3 working days.
Item name: [ Magnector X ] High Performance Universal Sony Xperia Z1 & Z2 & Z3 Charging Adapter for Micro USB Cable - Enhanced Magnetic Connection and Charging Speed [ Black ]
This product felt more durable and solid when taking it out of the mildly fancy packaging. The product itself isn't connected to a cable but has a micro usb port which you attach your original Sony cable to. (unfortunately I need 10 posts before i can show pics but just check it out on Amazon. I tried it for the first time last night as my phone stays next to my pillow and it seems to do the trick as it didn't fall off even with my cheapy case attached to it in the morning.
As the saying is, buy cheap...buy twice! Hope this review helps anyone on making a decision between the cheap ones and expensive ones.:good:
figo_rulz11 said:
Hi All,
Thought I'd give my review of two different magnetic cables I've purchased from my Xperia Z3.
Firstly, I purchased a £3 magnetic cable from Ebay which was utterly a waste of money! Soon as you picked the phone up or touched it the connection port would move up or down. I contacted the seller who is sending me a replacement so will see if this is any better.
Now on to the more expensive magnetic cable but with a twist.
This magnetic cable I purchased from Amazon had great reviews from previous Z2 users. Now I wasn't sure if it was Z3 compatible but turned out the ports are the same for Z2 and Z3. So I purchased the item from Flubit as you get a little discount if they can get a deal for you and it arrived within 2-3 working days.
Item name: [ Magnector X ] High Performance Universal Sony Xperia Z1 & Z2 & Z3 Charging Adapter for Micro USB Cable - Enhanced Magnetic Connection and Charging Speed [ Black ]
This product felt more durable and solid when taking it out of the mildly fancy packaging. The product itself isn't connected to a cable but has a micro usb port which you attach your original Sony cable to. (unfortunately I need 10 posts before i can show pics but just check it out on Amazon. I tried it for the first time last night as my phone stays next to my pillow and it seems to do the trick as it didn't fall off even with my cheapy case attached to it in the morning.
As the saying is, buy cheap...buy twice! Hope this review helps anyone on making a decision between the cheap ones and expensive ones.:good:
Click to expand...
Click to collapse
I also just got this cable through today and its fantastic.
Avoid the cheap ones.
Got one first thing Monday morning via Amazon and super impressed because I ordered it at 6.55pm on Sunday night!
http://www.amazon.co.uk/gp/product/B00H2EEB4S/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I got mine from Amazon (Prime) but there was only one in stock and I got it, so now it's showing from another supplier.
It's great! I had two unknown Chinese-made ones before, and both struggled to stick to my Z2 or Z3, causing all sorts of weird issues (mostly that of what it would be like to attach and detach the lead repeatedly). They're now history.
So far this is clamping on so solid that there's no chance of that happening, and I always 'rotate' the magnetic chargers off so no chance of pulling out the connector.
I also got the official dock, but at £20-odd at a time (and I now have a mountain of docks because all I need are the inserts, not a new dock for each phone) I will probably get one or two more of these. The dock by the bedside and these around the house and at work.
Hi what's do you mean by rotate to keep it secured?
When taking off I simply fold/twist it back rather than pull it off and risk damage, given how strong the magnetic force is.
I have bought this one on ebay , "Magnetic Charging Dock Cradle Desktop Charger for Sony Xperia Z3 and Z3 Compact" for about 10 euro's (incl sending)
it works nice , you don't need to open the covers each time.