My Device: MT6572
The reason I wanted to change my rom because my Rom is eating up too much ram.
So I downloaded a rom for 6592 , i was wrong because the older version of Droid Tools give me a false one.
So yeah.
I flashed the wrong rom. and now I cannot start the phone, No Power, and when I connect it to try to flash again (COM) it is disconnecting by itself for 2 seconds then reconnects again then disconnects its on a loop.
if can only stop the looping, for it to stay connected, I can reflash the Stock Rom.
Please help me. Thank you in Advance
Kind Regards,
Please Help! Up up.
Anyone? Please help me. Really needed it.
Update: I managed to flash my stock rom but gives me a black screen guys.
please help me
Related
hello every one
please any one can help me in my situation
i have SGSII 9100 and i install new ROM ""Hydra-H2o_v1.1.2_AOKP_-_SGS2-i9100-IMM76I-ICS-4.0.4"" after installing every thing is working fin, but in SETTING ther is some changes like ROM CONTROL under this is PERFORMANCE i enabled """FAST CHARGE """ feature but after restart the phone always giving recharging
and if i restart the phone is stuck in booting and giving battery logo like i'm putting in charger while phone off
i tried many times to restart but same problem, also tried to enter to recovery mode but phone unable to load, just one thing i can do it its enter to download mode and install Official ROM and after installing i have to rooted but under that version the phone always giving warning message about the charging and also always charging without charger
PLEASE HELP ME
PLEASE HELP ME
PLEASE HELP ME
PLEASE HELP ME
PLEASE HELP ME
Soon please
Hi
Your phone looks like it is "soft bricked" and after some searching I found a guide that may help you.
forum.xda-developers. com/showthread.php?t=1457458
I hope I helped you.
Dear All,
I hope someone can help me get out of the situation.
I am using this FEITENG HTM H9001 6 Inches China Phone.
It came rooted by the vendor.
It is a good and nice phone. And I like it alot.
After I install a "font changing" apps,
The phone auto shut off and restart and it stuck at the HTM logo.
So sad Sad.
I know I need to reflash the firmware.
So I did some search on line...............
After finally managed to install the USB's driver which I was not able for quite long....
I follow the instruction on youtube from this site.
Down loaded the flast tool - SP Flash Tool v3.1332.0.sn187
Go to needrom to get a HTM H9001 firmware.
It should be there "right firmware". Someone there on the page where i got the firmware for H9001 said that its stable after he flash it. So proceeded to download it. Safely assume its the correct rom.
Using the flashtool, I followed the flashing steps exactly untill the green sign appeared. I was looking forward to see it start again after the problem mentioned above...........
After pulling out the cables from my PC, I press the power/start button of the phone to check if its ok....BUT It did started but it only shows "whitish color screen"
I can't even see the usual green colour HTM logo when the phone was switched on but I can hear sound of the phone starting... it stays at the whitish screen. And when I touch certain part of the screen the phone seem to response...just that I cannot view the desktop and the icon.. perhaps the video driver was corrupted in some way...or could it be the wrong rom
I proceeded re-flash it again........
same result - white screen.... phone still response to " power switch when press the LCD goes off. and some responsive sounds when the blank screen is touhed...
I am here in hope for some luck in finding ways to recover my phone back to normal...
It all started from installing a font changing apps that corrupted the firmware...than perhaps my action may have complicate the situation further....
Please. Any help would be great.
Thanks so much in advance.
How can I make good back my Feiteng HTM H9001
Or did I got the wrong ROM ?
It did not stae Feiteng just H9001 .
The rom I downloaded for my phone is here for my Feitend HTM H9001.
Is this the correct rom for my phone ?
Appreciate , really needs help to get out from this problem.
I love this phone. I want to make it good again Smile
I will try to upload some image to show its current stae.
many Thanks in advance.
Desmond
So desperate..I uses this MTK Droid tools.
I turn the phone on and it detected the details on my phone.....
Is there any way to use other tools to get my phone back to working like before the "font changing apps" time .... it was working great just before with no problem at all.............
MTK droid can detec the details of my phone...........
BUT i am lost - any way to use Droid tools to save the situation ?
I attached some picture to share what I meant...
Hope some nice great guys can shed some lights so i can try to move ahead..currently really lost... newbies to android phone....
Many Thanks
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Repair HTM H9001
moneycow said:
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Click to expand...
Click to collapse
Hello friend,
if you want to recover your H9001 look this link:
movilesdualsim com htm6582
on the site will explain the steps to solve your problem.
To me it happened to me same thing that has happened to you.
And now I enjoy my H9001 more than ever.
regards
Hi! I need your help please! I was trying to downgrade my phone software, using odin, by installing a different kernel,
the problem is that it gave me an error, and now my phone doesnt work at all, it only turns on, and a big black screen,
so can someone help me in getting it back to normal, everytime that I tried now with odin to install a different kernel
to make it respond doesnt do anything, it starts the process, but an error 7 come up..:crying:
Please help me, dont know what else to do and I need my cellphone back.
Thanks in advance for your replieS!
I'm using Lenovo A766, Android 4.2.2. My device is a rooted android. I have a problem that just happened last night. I tried to install 'Chainfire 3D'. To those who know how Chainfire 3D works, I'd appreciate it but to those who dont know, we need to install something that even I cant remember what it is but it did give me a warning about something before installing it. My problem is, Once I installed the application, My device would reboot automatically. Now, my Lenovo A766 would not boot up, It's stucked at the boot up. Idk whether we call this brick or what but as I know, Brick is when your phone cant even shine a single light. But my device can, just it gets stucked at the boot up. Please help me asap. Thanks for reading this thread. All ways to fix my problem are really meaningful to me. I'd really really appreciate it! Thanks again!
Please help me. Onegai shimasu.
Hello everyone,
So I got a phone from a friend, he said the phone just stopped working. The power button just vibrates the phone and nothing happens, I cant get into the recovery, and when I connect it on a charger it just displays it's alcatel logo and does not move any further.
I assume that the memory got wiped, but maybe I'm wrong. Anyways, it's running on MTK6580 and I tried to flash a new recovery with system and everthing else. It didn't work out. And now I need your help... I can't find a stock ROM for this phone, and I need you guys to send me one if you can. The thing is, I need to install it through the SP Flash tool, so I will need all the information in the scatter file. Like I need the recovery, system, boot and all of that stuff....
If I posted in the wrong section, I'm sorry and if something is not clear, ask me.
Thanks in advance guys!