Hello everyone,
I have a problem with my galaxy s3!
It crashes on startup screen "Samsung Galaxy s3, i9300" and it does not go into recovery or in download mode.
I tried it with jig and I was able to go into download mode but when I try to flash the firmware, Odin gives me error.
if I try to flash the full firmware this:
Code:
<ID:0/021> Added!!
<ID:0/021> Odin v.3 engine (ID:21)..
<ID:0/021> File analysis..
<ID:0/021> SetupConnection..
<ID:0/021> Initialzation..
<ID:0/021> Get PIT for mapping..
<ID:0/021>
<ID:0/021> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
advise anyone know how I can solve my problem?
Related
Guys
I flashed a ROM from Spain using Odin (I9300XXDLIH, 4.2.1 from Samfirmware) into my S3 (GT-I9300 bought in Brazil) and it works by 1 month. Then my phone starts to crash or boot by itself and finally it stop boot into Samsung screen.
I have access to Download screen, but I have NO access to recovery screen.
Now, I tried to flash a new ROM and Odin says that it has no partition. The phone doesn’t charge anymore (I need to charge using a friend’s phone).
I tried flash an old version (4.0.4) but every time I get “no PIT partition” from Odin. I also tried to flash from different version of Odin and same results.
Is there any way to solve this without getting a Service Center? Here in Brazil is difficult to find JTAG service, so I need some home solution.
Thanks and sorry for my English.
Hi, mines went exactly the same as that last week, tried everything possible software wise. sent it to samsungs ext service centre in scotland. i still dont know fr sure if there goni fix it under warranty as in download mode it says official Rom but it also says custom system. Theyve had it since last tuesday and on the repair status it still says "Acknowledge(ASC)"
heres hoping, and i hope u get urs sorted
Please feel free to find the Sudden Death thread in General section.
spamtrash said:
Please feel free to find the Sudden Death thread in General section.
Click to expand...
Click to collapse
Hi spamtrash,
As I can understand, that thread is to prevent. Now I need to recovery.
I just tried to flash a new ROM again, and I get the following:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBDLJ1_I9300UBDLI2_I9300ZTODLJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
This is the first time I get that. The SetupConnection took a lot of time.
I tried to flash PIT file (do not know if it is the right PIT) and get Fail instant.
Any other help. Thanks to all.
Edit:
Now, I turned off and on again and tried to flash the same ROM:
<OSM> I9300UBDLJ1_I9300UBDLI2_I9300ZTODLJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009>
<ID:0/009> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
It says no PIT partition.
Finally, I tried a PIT:
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009>
<ID:0/009> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
thats mine when i try write PIT file to my phone
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
and when i try flash CWM here:
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
any suggestion
Anyone flashing a PIT file unless 100% correct is asking for trouble .
Buy a new motherboard .
jje
if theres an error in the emmc flashing the original pit file is unduly. the first thing you need is to flashing recovery to see if its working or not then there solutions such as blocking or disabling the corrupted areas in the emmc chip.
Guys,
Thanks for helping but I guess the phone is briked. I will trie the service center.
My phone has gone into emergency recover and I've tried to recover it by flashing it with both "Odin" and the samsung "SimpleUpgradeTool" but it has failed everytime I've tried it.
I have the SCH-530 from US Cellular and am unsure on what to try next.
Any and all help is greatly appreciated.
The following is the ouput message from Odin ---
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
mdahlke said:
My phone has gone into emergency recover and I've tried to recover it by flashing it with both "Odin" and the samsung "SimpleUpgradeTool" but it has failed everytime I've tried it.
I have the SCH-530 from US Cellular and am unsure on what to try next.
Any and all help is greatly appreciated.
The following is the ouput message from Odin ---
Code:
Odin v.3 engine (ID:3)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
recovery.img
NAND Write Start!!
cache.img
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
While flashing with odin make sure ur kies is completly closed or from kies tools, preferences, uncheck option open kies while phone connects restart and try should work
Sent from my GT-I9500 using xda premium
I have the SCH-530 from US Cellular and am unsure on what to try next. Wrong forum its not I9300 . Firmware / mods from here will brick your phone . jje
i tried to update my i9300 but everytimes odin gives error
<ID:0/169> Added!!
<ID:0/169> Odin v.3 engine (ID:169)..
<ID:0/169> File analysis..
<ID:0/169> SetupConnection..
<ID:0/169> Initialzation..
<ID:0/169> Get PIT for mapping..
<ID:0/169> Firmware update start..
<ID:0/169> boot.img
<ID:0/169> NAND Write Start!!
<ID:0/169>
<ID:0/169> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
no matter what usb port i use....i also try odin 3.0.4 and 1.8.5 but same error...phone cannot boot or go into recovery ..just in download mode..plz help
BaCkkk said:
i tried to update my i9300 but everytimes odin gives error
<ID:0/169> Added!!
<ID:0/169> Odin v.3 engine (ID:169)..
<ID:0/169> File analysis..
<ID:0/169> SetupConnection..
<ID:0/169> Initialzation..
<ID:0/169> Get PIT for mapping..
<ID:0/169> Firmware update start..
<ID:0/169> boot.img
<ID:0/169> NAND Write Start!!
<ID:0/169>
<ID:0/169> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
no matter what usb port i use....i also try odin 3.0.4 and 1.8.5 but same error...phone cannot boot or go into recovery ..just in download mode..plz help
Click to expand...
Click to collapse
what was the rom before flashing? and what is the f/w that you are flashing now?
i got this phone from my friend and he is noob ..he tried to flash a rom but dont know which on..right now im flashing KIES_HOME_I9300XXEMB5_I
NAND might be damaged or partition struture damaged/corrupt.
Try this rescue firmware:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
If that doesn't work you'll probably need a service centre.
Hey everyone
Having read many threads on this issue I would appreciate help for my specific case. I got a defective device from a friend that wouldn't start anymore (introductory Samsung animation was playing repeatedly). I then tried to flash "GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9" to eventually install CM 10.1.3 and then factory reset to make sure the brick bug is not an issue. However, I was not able to flash CWM, because it gets stuck at "NAND Write Start" and eventually fails (see below). Interestingly, I flashed another i9100 flawlessly only a few days ago with the exact same setting. Nonetheless I tried different Odin versions as well as different usb ports and cables.
I have no idea what kind of kernel or android version was running on the device and I can now only get into download mode.
When reading this guide I came across two problems. First, flashing a kernel - some other thread recommended "Siyah-s2-v5.0.1" - was unsuccessful. Second, I wasn't sure if I should try to flash the ICS version mentioned in this thread.
Some mentioned falling back to flashing PIT-files, but because recovery mode is not available, I cannot use the "emmc partition scanner" to identify the correct PIT-file to flash.
I would really like to save this device, so someone else may enjoy using it again in the future. Thanks in advance for any help!
Cheers
sNiXx
ODIN 3.09
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ODIN 1.3
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Could anyone please help me out with this issue? I would appreciate it, if I could get the device running again.
Thanks in advance for help or tips!
Hi guys, massive noob when it comes to phones.
My mother got a s4 which is locked to a specific carrier, me thinking a reinstall of android will fix the problem just finds a online way of doing it and managed to break it....
now I cant boot it back up normally and the recovery screen doesn't boot, only the download screen does.
This is what I'm doing. As you can see that re-partition is unchecked but it tried to re-partition anyway. Please help.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
won't let me add a image :/
i .imgur.com/IhK5GdN. jpg