hey, everyone...
quick question to see if anyone has come across this particular issue.
i've been running dirty unicorns, toast kernel alex uses for that rom.
woke the phone up yesterday am after spending the night on the charger.
still plugged in, i checked the time.
pushed the power button again to put it back to sleep.
nothing...the screen stayed on, but frozen.
unplugged it from the charger, screen powered down.
haven't been able to get the screen back on.
strangely, the home, menu, back and search buttons do manage to light up, though.
oddly, enough...the phone still works normally.
i can guess as to what my security pattern is, hit the magnifying glass to power up google now and ask it questions.
i can also receive phone calls and swipe to take or hang up the call as usual.
once on the call, i can guess as to where the red bar is for hanging up.
phone works like normal...as long as i can guess as to where everything is.
also, when in lock screen mode i can side swipe to get to the camera and take pictures.
so, essentially, screen doesn't work...but, it still recognises and accepts touch input.
i just can't see a damn thing.
any idea?
took it to a sprint corp store and they changed the housing for me...for free.
changed the screen, top housing, etc.
they said it looks like it might be the board.
any ideas beyond that?
thanks again, everyone!
also, on a weird note...my battery is bulging in the middle.
i guess it's on the way out...with everything else.
I've had this phone for years and am having this issue too. Anyone have an idea?
yeah, it turns out that my screen's fried.
at least that's what the sprint tech told me.
pretty much everything works perfectly.
impeccably...i just can't see it.
i guess that's it for the phone unless i want to replace the screen.
they're rather inexpensive...depending on where you source it from.
Related
I know there are hundreds of threads and articles posted about HD2s freezing with the lock screen but this issue seems different to me. My problem is that whenever I lock the phone the touch screen will freeze entirely. I thought a work around may be to install a different lock screen. After installing that I can get past the lock screen but the touch screen still is not responsive. I have no idea what to do. I already did a hard reset and it still does it. I would like to add that it is completely consistent. It happens every time without fail. In order to even use the phone I have to pull the battery and I get one use out of it before it locks and I have to pull the battery again. Does anyone have any suggestions? I would really appreciate it..
Update: I flashed the original ROM to my phone and the freezing problem still exists.. I have no idea what to do at this point.
Update 2: Narrowed down the problem to being the physical "power/end/lock" button. If I slightly press it but not fully it will go to the honeycomb style menu with all the apps. If I press it fully the screen will go out like normal but then if I restore it, the entire screen is locked up. Nothing will work after that until I pull the battery.
I've directly linked the issue with the power button. I dont know why all of a sudden the power button would have a different function. The work around I found is while the phone is locked and the screen is off I can press the green button to unlock the phone and the touch screen will then function. If I use the power button it will remain frozen. Any ideas what happened?
Hello,
I got some bad news for you, this issue is actually related to the digitizer (hardware) not software. What i would recommend is called HTC for a repair and send it in, it is covered by warranty, hopefully you have warranty.
A lot of people are having this issue, no-one yet has been able to pinpoint the cause, but here is the link a thread with similar problem:
http://forum.xda-developers.com/showthread.php?t=854165
Luckych
Thanks for the reply. I do not think I have a warranty on this phone considering I bought it privately. Ill talk to Tmo and HTC and see what I can do. Just a theory, I may be wrong. But I live in PA and its been getting below 20 here lately. I noticed today that my work around didnt work when I was outside working on my car. Then I went inside and used a blow dryer to heat up the phone and it started working again. The end button didn't function properly but I could unlock the phone with the green send button. Perhaps the cold weather is shorting out people's digitizers? I don't really know how they work so that's why i said its only a theory. I bought this phone in the spring and didnt have an issue until now when it started getting really cold.
So, being clumsy, I left my Streak in my hoodie pocket. Well, we can all see where this would end badly once I bent down to pick something up. I did, dropped my phone and cracked the screen.
I quickly went and bought a replacement glass + lcd display, and replaced the unit. But, upon turning the phone on, I noticed if I hit it a little too hard on one corner, It would restart, and the vibrator motor had ceased to work.
So I figured, hey, I'll just rebuild it again. So I took it apart. Looked through everything, took my time in putting it back together, because maybe everything wasn't fitting snug.
Now, When I turn it on, every thing is on, buttons light up, and the screen is lit up, but it is black. I never even get to the Dell logo. After about a minute the buttons dim, as if in idle. So i believe the phone still works, but maybe the connections on the MoBo is faulty? Any help would be nice, thanks.
check to see if the ribbons are snugged in place.
mofoahh said:
check to see if the ribbons are snugged in place.
Click to expand...
Click to collapse
I agree take it apart and chech your work. I had problens with my camera and flash. It was tge connector not being fully seated
Sent from my Dell Streak using XDA App
Well, I just took off the rear cover and reseated all 3 connections, pushed em in as smoothly and far as they would go. But, same thing. Black screen. But the LED is still working...
I'm having the very same problem. This is my second replacement screen and neither displays anything except black screen with backlight on, and the home + settings + back buttons remain lit. I can hear my phone starting up and receiving messages, but I cannot see anything. I've taken the phone apart and put back together five times between two replacement screens.
Does anyone know what ribbon cable might be at fault for this particular issue? The largest ribbon cable was shipped bent across the circuit board on both screens; there is a permanent creese in both ribbon cables, but I'm not certain this is causing the issue.
Any insight or assistance with this issue would be greatly appreciated!
Ok, so my girlfriend dropped her phone and cracked the screen, I ordered a new LCD/Digitizer assembly and everything seemed fine. She then realized that it had a dead line while playing Draw Something. I sent back and just received a new assembly and installed it. Ever since I installed it the screen will occasionally black out and lock up. It takes forever for screen to come back up and seems very random in how long. I try powering off and on to no avail. Once it does come back I get an error log in the notification pull down saying it just rebooted form an unexpected reboot error and I have sent this notification 3 or 4 times.
Things I have tried.
Taking apart and checking all connections as well as cleaning screen on inside and out where proximity sensor goes. I am seriously at a loss, it seems to work for a while on a fresh(actual battery pull) and work fine until it just freezes no button push except power button which shuts off screen and then never comes back except for the captivate buttons on the bottom. I have searched for answers but haven't found anyhing like before.
Thoughts?
Thanks,
Kevin
I know that feel bro.
KKellett said:
Ok, so my girlfriend dropped her phone and cracked the screen, I ordered a new LCD/Digitizer assembly and everything seemed fine. She then realized that it had a dead line while playing Draw Something. I sent back and just received a new assembly and installed it. Ever since I installed it the screen will occasionally black out and lock up. It takes forever for screen to come back up and seems very random in how long. I try powering off and on to no avail. Once it does come back I get an error log in the notification pull down saying it just rebooted form an unexpected reboot error and I have sent this notification 3 or 4 times.
Things I have tried.
Taking apart and checking all connections as well as cleaning screen on inside and out where proximity sensor goes. I am seriously at a loss, it seems to work for a while on a fresh(actual battery pull) and work fine until it just freezes no button push except power button which shuts off screen and then never comes back except for the captivate buttons on the bottom. I have searched for answers but haven't found anyhing like before.
Thoughts?
Thanks,
Kevin
Click to expand...
Click to collapse
I've actually had this exact same problem with my phone. I haven't replaced the screen but ever since the update my phone will do what hers does. It will freeze after a bit of use and I cannot do anything with it but do a simpull and then it will work again for a bit. I haven't been able to fix it. I have done factory resets, had the store reflash the software and yadda yadda yadda. I'm havinh my phone replaced now but it's frustrating not being able to figure out how to fix it when I feel like it should be fixable since it literally didn't even start until minutes after I installed the update.
It sucks.
Had to do a battery pull last night. Had my phone in my pocket for probably an hour, when I pulled it out the screen was black. LED would flash ocassionally and I think I heard a text so everything was fine except the screen. I have Always On off, and I require either fingerprint, a pin, or OK Google voice recognition to unlock.
Tapping the screen, hard pressing or fingerprinting the power button, volume buttons all did nothing. I guess there's a dialog for powering off the device so holding the power button didn't reboot it either. Eventually pulled the battery and it rebooted fine.
Anyone else had this? Pretty disappointed. Haven't installed any new apps in the past few days. I've heard (and had once) a related issue where the phone takes a lot of presses to turn on the screen—in that situation, Always On is on, it's in your pocket so the phone detects and turns off Always On, and for some reason when you pull it out it very infrequently takes a little while to come on. No idea if they're related.
Do you have a screen protector, skin or case installed? Maybe it's causing issues with the sensors in combination with something else?
raynan said:
Do you have a screen protector, skin or case installed? Maybe it's causing issues with the sensors in combination with something else?
Click to expand...
Click to collapse
Have a case and a glass screen protector but they are not new.
Sent from my LGLS992 using Tapatalk
This just happened to me yesterday. Dropped the phone, and it stayed on but the screen is completely black. I opened it up and tried re-setting the display ribbon cable, but that didn't do anything. Anyone have any ideas what the problem might be?
(UPDATE: Here is a link to a short video of my issue: https://youtu.be/YqKW3tU4Fhw)
So I cant seem to find ANY info relating to this issue aside from results for the LG G4, but the solutions for said phone are all over the place. Some are bad screen, some are related to sim tray, some are related to water damage and battery etc. So basically, about a month after buying this phone (KIW-L24 US version), the screen started to artifact and flash in and out randomly. There is nothing that seems to trigger it. I have set the phone down on a table while on the homescreen and watched the lightshow. It is basically a mixture of the problems seen in these videos (Feat. LG G4).
https://youtu.be/gAUkXLR7eQI And https://youtu.be/QstOH66pfiU.
Symptoms:
Screen will randomly start to flicker and fade in and out. I will also get crazy artifacting lines. (Think de-gaussing an old CRT monitor or simillar to what is seen in the second video)
If i see the problems happening, locking the phone and unlocking again will sometimes fix it temporarily. Other times the problem continues after i turn the screen back on.
Sometimes the screen will refuse to come back on. The backlight turns on, and the digitizer responds, but the screen is still black. Making sure the screen really is off, I can come back to the phone a few minutes later and it will turn on. Other times ill have to hard reset the phone (hold power button 10 sec) and it usually brings the screen back to life.
Background:
I bought the phone "used - Like New" from amazon. It came with all the original accessories and even still had the film protector on the back of the phone. I may have noticed these problems after I received the phone, but they really only started to show about a month after purchase.
At first I though it could be software related as I was running CM13 and something could have been corrupted, so i did not just a factory restore, but a full reflash. This didn't solve the issue. Restarting my phone and the reflash did help, but the problem returned. The inability to turn the screen on persists through a reset and I have to wait till the phone boots again to get the screen back. Sometimes takes more than one reboot. This pretty much confirms a hardware issue right? If i put the phone on a black screen, i can see three small fuzzy "dots" in a triangle shape in the top left quadrant. Could the screen have been damaged by whoever owned it before returning it? They are not dead pixels per se, but seems more like areas where the backlight is showing through ever so slightly more. Not visible unless you are on a black screen in a dark room. Ill upload a video showing some of the issues. Any help is appreciated!
im afraid you need a new display brodar...
Seems to be hardware issue. You can visit the nearest service center to get it fixed for few bucks if you don't have warranty.
Yeah that's what i figured, i just needed conformation. I was able to get amazon to take the return even though I was out of the return period. So at least ill be able to get a refund. Ill just pay the extra for a new one this time haha.
One question : Do u have over heat problem with ur phone ?? If u feel ur phone is more than work from the back dont replace . U'll damage the new screen also . Some ppl erported over heat cpu issue with honor ! ;.
KobaltPanther said:
(UPDATE: Here is a link to a short video of my issue:
)
So I cant seem to find ANY info relating to this issue aside from results for the LG G4, but the solutions for said phone are all over the place. Some are bad screen, some are related to sim tray, some are related to water damage and battery etc. So basically, about a month after buying this phone (KIW-L24 US version), the screen started to artifact and flash in and out randomly. There is nothing that seems to trigger it. I have set the phone down on a table while on the homescreen and watched the lightshow. It is basically a mixture of the problems seen in these videos (Feat. LG G4).
And
.
Symptoms:
Screen will randomly start to flicker and fade in and out. I will also get crazy artifacting lines. (Think de-gaussing an old CRT monitor or simillar to what is seen in the second video)
If i see the problems happening, locking the phone and unlocking again will sometimes fix it temporarily. Other times the problem continues after i turn the screen back on.
Sometimes the screen will refuse to come back on. The backlight turns on, and the digitizer responds, but the screen is still black. Making sure the screen really is off, I can come back to the phone a few minutes later and it will turn on. Other times ill have to hard reset the phone (hold power button 10 sec) and it usually brings the screen back to life.
Background:
I bought the phone "used - Like New" from amazon. It came with all the original accessories and even still had the film protector on the back of the phone. I may have noticed these problems after I received the phone, but they really only started to show about a month after purchase.
At first I though it could be software related as I was running CM13 and something could have been corrupted, so i did not just a factory restore, but a full reflash. This didn't solve the issue. Restarting my phone and the reflash did help, but the problem returned. The inability to turn the screen on persists through a reset and I have to wait till the phone boots again to get the screen back. Sometimes takes more than one reboot. This pretty much confirms a hardware issue right? If i put the phone on a black screen, i can see three small fuzzy "dots" in a triangle shape in the top left quadrant. Could the screen have been damaged by whoever owned it before returning it? They are not dead pixels per se, but seems more like areas where the backlight is showing through ever so slightly more. Not visible unless you are on a black screen in a dark room. Ill upload a video showing some of the issues. Any help is appreciated!
Click to expand...
Click to collapse
Try moving to stock once , if it fixed stick to it for few days . 99% of possible cases for hardware issue .
So better request for a replacement from huawei . but don't mention them that u bought it used . tell them u bought it new