Related
I found a very nice & Slim universal charger on Kensington's site for Notebook, PSP, Ipod (yes I have all this stuff in my backpack...), but a tip for hermes seems to be missing.
Does anybody now a similr device with Hermes tip too?
TX
Basically anything with a mini-USB plug will work.
That's not been my experience. If it connects something to the data pins it will work, if not, it won't charge correctly.
I used my old Motorola V3 wall charger to charge mine for a while, worked fine - thats a standard mini-USB connection. Also used a Motorola V3 car charger, and I've just bought a Brodit car cradle for my device which has a fixed mini-USB which works fine?
KevinBaker said:
I used my old Motorola V3 wall charger to charge mine for a while, worked fine - thats a standard mini-USB connection. Also used a Motorola V3 car charger, and I've just bought a Brodit car cradle for my device which has a fixed mini-USB which works fine?
Click to expand...
Click to collapse
Interesting. We've found that unless the charger has pins 4 and 5 bridged ('unused pin' to 'ground') on the mini usb end then the hermes will act strangely. It will start charging the first time you insert but then it might stop and then it won't charge again until you reset it.
The pin doesnt need to be bridged when theres a data source like a pc on the other the end.
Could you check to see if your chargers have those pins bridged or not?
icemantwilight said:
Interesting. We've found that unless the charger has pins 4 and 5 bridged ('unused pin' to 'ground') on the mini usb end then the hermes will act strangely. It will start charging the first time you insert but then it might stop and then it won't charge again until you reset it.
Click to expand...
Click to collapse
I have not been doing any kind of research about bridging those pins because I just read about it first time, but my experience about charging problems are very similar to yours. My TyTN won't charge normally via USB-hub or car-adaptor, and after failing the charging process, it won't start charging again. Resetting helps after this, but I think that also waiting resets the situation. But that I'm not so sure about.
When I connect it directly to PC, it works just fine.
If bridging those pins helps, my car charging problems are wiped out
rantanplannet said:
If bridging those pins helps, my car charging problems are wiped out
Click to expand...
Click to collapse
Hahah not really, ever tried getting to those pins? They're tiny!
icemantwilight said:
Hahah not really, ever tried getting to those pins? They're tiny!
Click to expand...
Click to collapse
Yes, they are tiny at the other end, but bigger at the other
And if that causes still problems, cutting the wire is not so big deal either, then you can easily connect wires together
rantanplannet said:
Yes, they are tiny at the other end, but bigger at the other
And if that causes still problems, cutting the wire is not so big deal either, then you can easily connect wires together
Click to expand...
Click to collapse
Except that pin 4 doesn't have a wire connected to it (only 1,2,3,5) because the other end only has 4 pins
icemantwilight said:
Except that pin 4 doesn't have a wire connected to it (only 1,2,3,5) because the other end only has 4 pins
Click to expand...
Click to collapse
Damn .. then it's not so easy.
But I guess it's still possible, without totally breaking the plug. I hope ...
Interesting. That is exactly the issues I see using a 12V/USB adapter and cable in my car. Well hopefully in 2-3 months when my free vehicle charger comes from Cingular it will have the pins bridged and work properly!!!!
I wonder if the bridged pins and data cause the bluetooth to turn off after a period of time. I see that happen on my phone often when its connected and charging. But disconnected from the 12V/USB charger the BT stays on.
Thanks for testing and posting.
I had this exact problem with my m5000 to, i use a ipod battery extender as a backup for my m3100 as i regularaly find the need for extra power.
Quick work around for this problem is to power down completely by holding the power button. Then plug it in while turned off, wait for charging light to go orange then switch back on, will continue charging then until plug is removed.
HTH
V3
So, I don't understand: in the end, does it work or not with an adapter for V3?
If yes I could by that...
TX
If it helps any, I use an iGo universal power adaptor (available from Radio Shack and Expansys) which uses the iTips style device-specific tips. This is very similar to the Kensington system, although I believe the two are now incompatible.
Tip A53 (which is also designed for AudioVox phones) works well for me with my T-Mobile MDA Vario II.
http://www.igo.com/
Hi All,
I was wondering if anyone had any insights in to this problem I have been having.
Briefly, I have the 4g lte verion on EE's new network. I purchased the official MHL/HDMI adapter which works fine and the video is outputed to my sammy 50inch tv fine. The issue I have is the battery drains while doing so. I belive this may to due to the phone outputting more than it is drawing from the power source. Any thoughts ?
I spoke with Samsung tech and they said a number of people have started to report this issue and they are currently testing/investigating. If this is indeed the case seems a pointless acessory as a long video would possibly drain the whole battery, Im yet to test the full drain time.
Secondly, with a 3rd party docking cradle with spare battery slot which purchased from amazon (http://www.amazon.co.uk/eLifeStore®-Samsung-Desktop-Charger-Docking/dp/B008PPRGFY) also does not charge phone properly. Even with the orignial charger in the ac port (or usb port) . The phone reports as charging but stays the same or decreases. Charged directly from the socket it is fine. Strange!
Any help or thoughts would be greatly appreciated.
Thanks
Ian
It's common. Mine did that too! I switched to my old S2 charger, problem solved
Thanks Ill try that out, any idea why that works ?
lawboffin said:
Thanks Ill try that out, any idea why that works ?
Click to expand...
Click to collapse
No idea man? A design fault maybe? All I know is that my phone took for f#*%ing ever to charge with the USB type wall charger. I pulled it out of the socket and plugged my other other one in that was sitting right next to it and it started charging? Checked a few minutes later and it had climbed considerably so I pulled the USB cable out of the new plug and kicked it under the bed where it now lays resting not to be used again LOL.
USB plug/cord works perfectly fine? So I use it on the computer. My laptop even charges the phone via the USB cable faster than the socket plug (which is usually the opposite - as I am sure we are all aware). So yeah I would say poor design or defective wall plug or both or something? Wasn't going to send my phone back because of it. 2second decision problem solved Samsung phone is great!
Im having exactly the same problem.
I have an s3 on orange and have the same mhl adapter conected to my tv.
I have tried the charger from my s3 which does says its charging when I connect my phone but only for about a minute so I also tried using the charger from my s2 and that just does exactly the same.
An easier way is to buy the official allshare dongle for your hdtv then you can stream anything from your phones screen direct to your tv and can have the phone on charge via pc or wall socket at the same time,
Hope this helps
i suggest you throw away your original charger (slow charge) and its usb cable (loose - actually caused the extsd to become damaged to the point i had to repartition) and buy yourself a cheap usb cable for data (£2) and a 3rd party charger (pref not a usb adapter one - £5) and all should be fine!
I still experienced a small battery drain while using the mhl adapter, however, i froze a few apps with titianuim (ones i know run all the time like utter and tasker, paragon ntfs, easy ums, directory bind etc), and put it on min brightness - works like a charm. I know its a effort freezing apps but does the trick with my phone... Since finding that out i actually keep paragon & easy ums frozen till i need them...
just a few thoughts for you....
I've got 4 different car chargers that *used* to work for my Note. I know they worked, because I did quite a bit of work over the last year which required the use of the GPS on my phone. Each one is > 1A. However, recently they've all stopped working for my Note. I've tested them using a Galaxy S3 and a Desire HD, and the chargers appear to charge the other phones just fine.
I seem to have no problems with AC or the computer charger it however. I've also taken the same USB cable I've used on the AC/computer and plugged it in to 3 of my car chargers, still no luck. Any ideas?
Your charge port needs to be replaced. If you're still under warranty, get it replaced. Otherwise there is a guide around here to DIY replacement I think..
I think we need more info. Since the phone charges at home the first suggestion is not helpful. The port is fine or it wouldn't charge at home. What ROM are you using? Did you try flashing a different ROM to test the charger in car? What were the results?
get a toothpick and make sure the metal in the port isnt touching any metal , then try , these ports in samsung phones are cheap , my wp7 focus had this happen , if it doesnt work ,its easy to solder it back in place , just open it up and make sure the solder is correct!
kimtyson said:
I think we need more info. Since the phone charges at home the first suggestion is not helpful. The port is fine or it wouldn't charge at home. What ROM are you using? Did you try flashing a different ROM to test the charger in car? What were the results?
Click to expand...
Click to collapse
The day after my post the AC charger stopped working with my phone as well. So after trying a couple more chargers, I took it into AT&T and got it replaced under warranty. However, since my wife and I both have the Galaxy Note, I may have to replace one in the future. Just in case someone needs it..
http://www.youtube.com/watch?v=pD9R-YUT69Q&feature=youtu.be
There's the video for replacing the usb port. Thanks for the help!
this is my work ... whit TAB 8.4 !!!
installed in my Audi A6 and connected to the car radio SONY REMOTE APP.
Slot car with homebuilt electric motor to eject the tablet !!
Fit in dual din
http://www.youtube.com/watch?v=kaRtDMauLQM
Very nice, just please don't watch movies while driving.
Nice! I want to do this in my 06 gti with some sort of custom fabricated float mount. Does your car use can bus?
Sent from my SM-T320 using Tapatalk
I removed the car stereo and just installed a radio sony bluetooth in the glove box.
I used the original system already complete amplifier.
I connected the outputs radio connector at busquadra connector AUDI!
looks fine...
mannyy said:
I removed the car stereo and just installed a radio sony bluetooth in the glove box.
I used the original system already complete amplifier.
I connected the outputs radio connector at busquadra connector AUDI!
Click to expand...
Click to collapse
Its cool. I'm testing same setup have u had any problems with auto connect bluetooth?
Not problem. . But I need push a sony radio for connection bluetooth App remote. .
I have call a Sony for this .. but need manual input..
Any one interested in this check out proclips (Google them). A non invasive easy way to install a tablet in the car. Works great with the Ford Sync system but anything with Bluetooth would be good. I've had iPad's, Note tabs, and now the 8.4 in my Fusion.
8.4 in my Jeep
Here's my setup in my Jeep. I got a custom mount that sits over the stock stereo. It slides in an out and locks. When I want it more secure, I slide it out and I have a lock box below my seat.
I ordered a ground loop adaptor to fix the hum when it's being charged and plugged into AUX. I'm currently shopping for a DAC that I can connect to a charge enabled OTG cable. The best I've seen is LAVA SimulCharge USB 1 but I wish it had more ports. Anyone find anything better?
TheBlueDuck said:
Here's my setup in my Jeep. I got a custom mount that sits over the stock stereo. It slides in an out and locks. When I want it more secure, I slide it out and I have a lock box below my seat.
I ordered a ground loop adaptor to fix the hum when it's being charged and plugged into AUX. I'm currently shopping for a DAC that I can connect to a charge enabled OTG cable. The best I've seen is LAVA SimulCharge USB 1 but I wish it had more ports. Anyone find anything better?
Click to expand...
Click to collapse
I have the lava adapter works pretty good. U can buy a 1 male to 3 female USB adapter for more ports. Make sure u have a good 2.1 amp charger and cable for the lava or it won't charge to good. I use a official Samsung car charger and the USB cable that came with the tab pro gets about 1000ma with my DAC hooked up. I use the Behringer uac 202 USB dac best for the money. Has optical also.. No ground loops or noise with optical.
b3ltazar said:
I have the lava adapter works pretty good. U can buy a 1 male to 3 female USB adapter for more ports. Make sure u have a good 2.1 amp charger and cable for the lava or it won't charge to good. I use a official Samsung car charger and the USB cable that came with the tab pro gets about 1000ma with my DAC hooked up. I use the Behringer uac 202 USB dac best for the money. Has optical also.. No ground loops or noise with optical.
Click to expand...
Click to collapse
Thanks. I was hoping I could get a 1/3 USB adaptor for more ports, but I didnt know if it would work. I have a two different 2.1 amp chargers now, and it barely gives any juice to it. It says max 1200 or so but it bare;y gets 3-400. It keeps the screen on and it drops a % every 5-10 min. I looked at the Behringer uac 202 but I'm connecting to a stock deck that goes have RGA inputs so I'm going in through an AUX jack. I could try an optical to headphone cable I suppose.
The ground loop cable I got killed the hissing noise. Is the UAC 202 a noticeable difference worth the extra cost and time setting it up? I'm concerned it will slow down charging even more. Does it suck up a lot of juice?
The sound difference is huge with the 202 dac even if u use the headphone out jack. Alot more clarity and output. doesn't suck much juice at all. U should invest in a Samsung Branded car charger most chargers say 2.1 amps but put out half.
Thanks, I just purchased the 202 and the lava so I'll be able to test this out this weekend.
I couldnt find the general samsung car charger that didn't have a cord already attached though.
Now I just need to find a USB backup camera solution and my car setup will finally be complete.
TheBlueDuck said:
Thanks, I just purchased the 202 and the lava so I'll be able to test this out this weekend.
I couldnt find the general samsung car charger that didn't have a cord already attached though.
Now I just need to find a USB backup camera solution and my car setup will finally be complete.
Click to expand...
Click to collapse
Lava just came out with the 3 port looks very nice.. ordered one will let u know how it works.
b3ltazar said:
Lava just came out with the 3 port looks very nice.. ordered one will let u know how it works.
Click to expand...
Click to collapse
Goodluck. The 3 port one looks pretty large. Does that function differently than if we were to buy a 1 to 3 USB adaptor?
I have my 1 port working correctly. Strangely whenever I use the Lava adaptor it lists it as 100% charges right away, but if I unplug the charger it drops back down to whatever it really is. Not a huge deal, but annoying to not see the accurate battery level when plugged in.
The 3 port adapter is supposed to be better with charging and has a button for charge only wich is cool. And according to lava there is no power feedback from the tablet to the the adapter. The tablet port keeps my usb dac on even when I unplug power With the one port. And I'm sure that the 3 port will have no problem with a dac hard drive and mouse (hopefully will let everyone know when I get it in a week or so).the one port would have a power supply issue with all 3 devices.
hi guys
when i plug in the charging cable to my s9+, the cable can go a bit up and down inside the port
is it the same on your devices? is this normal? if yes, how much movement is considered acceptable? my phone is charging normally and the movement doesn't seem to affect it in any way
i mean, it cannot fit super-tight and not move at all, right?
there isn't any dirt/lint inside the port since the phone is only one month old
any reply is appreciated!
Same here. But sometimes the phone would not detect the cable. However, I'm using cheap Chinese cables. Worst case scenario, at least we have wireless charging
blckb3ard said:
Same here. But sometimes the phone would not detect the cable. However, I'm using cheap Chinese cables. Worst case scenario, at least we have wireless charging
Click to expand...
Click to collapse
why aren't you using the cable that came with the phone? did it break or something? is it working normally when you use the original cable?
how much of a force is needed to make the usb port wiggle when you drop it while plugged in?