Hi All,
Sorry if the same question is being asked over and over again, but I am not able to find correct solution for my problem.
Well, the basic problem is status -7 error. but I want to know if I am using the correct version of CWM, ROM etc.
My Mobile model: GT I9300(Indian model- GSM)
Android version-4.3
baseband versionI9300DDUGNB1
Kernel - 3.0.31-2363855
Build # JSS15J.I9300XWUGML4
ClockworkMod recovery v6.0.3.2
ROM Manager Version 5.5.3.7
CMW Manger v3.55
Roms I tried to install are cm-11-20140918-NIGHTLY-i9300.zip and Paranoid Android downloaded from the below links respectilvey:
http://forum.xda-developers.com/galaxy-s3/orig-development/rom-cyanogenmod-9-nightly-builds-t1714354
and http://forum.xda-developers.com/galaxy-s3/orig-development/aospaandroid-4-4-2-kvt49l-t1745003.
With the help of Root checker i can say that the Root is granted properly.
Is my recovery version good? Coz, i have used a prior version( 3.xx) and it was working fine(though it was showing status 7 error), ie., for backup and restore, but in the version6.0.3.2, even taking a backup isn't properly done.
also, are the ROMS am using correct for my S3?
Please help me install new ROM.
TIA.
Agnel said:
Hi All,
Sorry if the same question is being asked over and over again, but I am not able to find correct solution for my problem.
Well, the basic problem is status -7 error. but I want to know if I am using the correct version of CWM, ROM etc.
My Mobile model: GT I9300(Indian model- GSM)
Android version-4.3
baseband versionI9300DDUGNB1
Kernel - 3.0.31-2363855
Build # JSS15J.I9300XWUGML4
ClockworkMod recovery v6.0.3.2
ROM Manager Version 5.5.3.7
CMW Manger v3.55
Roms I tried to install are cm-11-20140918-NIGHTLY-i9300.zip and Paranoid Android downloaded from the below links respectilvey:
http://forum.xda-developers.com/galaxy-s3/orig-development/rom-cyanogenmod-9-nightly-builds-t1714354
and http://forum.xda-developers.com/galaxy-s3/orig-development/aospaandroid-4-4-2-kvt49l-t1745003.
With the help of Root checker i can say that the Root is granted properly.
Is my recovery version good? Coz, i have used a prior version( 3.xx) and it was working fine(though it was showing status 7 error), ie., for backup and restore, but in the version6.0.3.2, even taking a backup isn't properly done.
also, are the ROMS am using correct for my S3?
Please help me install new ROM.
TIA.
Click to expand...
Click to collapse
You will need this CM11 version, better Snapshot than Nightly: https://download.cyanogenmod.org/?device=i9300
Than you will also need the latest recovery, I prefer Philz Touch Recovery: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/philz_touch_6.48.4-i9300.tar.md5 (flash it in odin)
Last I would recommand a Googy-Max Kernel like this one here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/philz_touch_6.48.4-i9300.tar.md5
Agnel said:
Hi All,
Sorry if the same question is being asked over and over again, but I am not able to find correct solution for my problem.
Well, the basic problem is status -7 error. but I want to know if I am using the correct version of CWM, ROM etc.
My Mobile model: GT I9300(Indian model- GSM)
Android version-4.3
baseband versionI9300DDUGNB1
Kernel - 3.0.31-2363855
Build # JSS15J.I9300XWUGML4
ClockworkMod recovery v6.0.3.2
ROM Manager Version 5.5.3.7
CMW Manger v3.55
Roms I tried to install are cm-11-20140918-NIGHTLY-i9300.zip and Paranoid Android downloaded from the below links respectilvey:
http://forum.xda-developers.com/galaxy-s3/orig-development/rom-cyanogenmod-9-nightly-builds-t1714354
and http://forum.xda-developers.com/galaxy-s3/orig-development/aospaandroid-4-4-2-kvt49l-t1745003.
With the help of Root checker i can say that the Root is granted properly.
Is my recovery version good? Coz, i have used a prior version( 3.xx) and it was working fine(though it was showing status 7 error), ie., for backup and restore, but in the version6.0.3.2, even taking a backup isn't properly done.
also, are the ROMS am using correct for my S3?
Please help me install new ROM.
TIA.
Click to expand...
Click to collapse
Error 7 means your recovery is to old to flash kitkat roms
Your recovery needs to be updated to install any kitkat roms.
Darke5tShad0w said:
Error 7 means your recovery is to old to flash kitkat roms
Your recovery needs to be updated to install any kitkat roms.
Click to expand...
Click to collapse
Can you please point me to the latest recovery. Coz i tried too many and still the same error.
TIA
Look for philz in development.
Related
Hi!
I was rooting my phone and flashing recovery by tutorial on thumblr with bootloader unlock code from huawei.
I had flashed TWRP because I did all the same as in this tutorial. Today I want to flash on my phone cyanogenmod rom from modaco for example (write "huawei ascend y300 cyanogen mod" in google ).
But if I'm flashing it by TWRP it isn't working (when I'm flashing it there is an error). I have read that I must have CWM to do it, but now is the problem - how can I remove TWRP and install CWM? (Rom manager method isn't working, and when I flash CWM by TWRP it isn't working too). And when I flash CWM with unlock tools from thumblr recovery isn't working.
What can I do?
Sorry for my bad English And sorry for post without links to pages I was writing about but "clever XDA" blocked links for new users :/
If you flashed TWRP Thru Fastboot just flash A CWM image as you would flash A TWRP image
Sent from my HTC Desire C using xda app-developers app
it's working now
I've downloaded wrong ver of rom, the good version works with TWRP. Now can you give me good kernel working with CM 10.1?
And which one of this roms is the best in your opinion? And without video playing and recording issues (artefacts).
modaco.com/topic/365268-all-custom-roms-for-huawei-ascend-y300g510/
help plz :c
help
Huawei y300 cyanogenMod
Hi, i need help plz, flashed my huawei y300 with cyanogenMod using twrp but after phone cannot find simcard!!!!
which version of cm did you flashed?
post link if you can and I'll try to help you
Gliwusss said:
which version of cm did you flashed?
post link if you can and I'll try to help you
Click to expand...
Click to collapse
Hi...could you help me too??
rootet my y100-0100...so i´m looking for a good costum rom but dont know how to flash it
greetz Marc
I have a y300. Can someone help me step by step how to update with cyanogenmod plz
Greetings,
I'm sorry if I'm posting this on a wrong place but I couldn't find a topic describing my problem.
I have Huawei Y300 for a few months now, and recently I installed Cyanogenmod 11 (Kitkat) on it (Root + Clockworkmod Recovery + KitKat + GAPPS).
The look of this ROM is fantastic (compared to the stock) but the performance is terrible (lag, restarts, app crashes...).
Now I would like to downgrade to Cyanogenmod 10.2 or 10.1, hopefully to get more stable and overall better performance.
Here is my procedure:
- I downloaded cyanogenmod 10.1 with gapps and placed it on my SD card.
- Entering the recovery I did a complete wipe/factory reset, formated data, system, cache, dalvik, everything!!
- Finally, I tried to flash new 10.1 but without success. As soon as I "click" on the file I want to flash, several lines of code appear and everything stops returning me to the recovery menu (later today I will upload a screenshot).
I've read on some forums that the "old" kernel install is necessary before trying to downgrade KitKat.
If anyone has the advice/sollution for me, I would appreciate it!
Hello,
I search the forum and did not find any good information about lg l4.i have already rooted the device using vroot.is there any way to install custom rom on the phone.i looked for CWM,but it is not supported yet and i do not know why.can we boot to the phone build in recovery to install custom rom,or we must port CWM first.we can start a project here for CWM recovery.
mistermind said:
Hello,
I search the forum and did not find any good information about lg l4.i have already rooted the device using vroot.is there any way to install custom rom on the phone.i looked for CWM,but it is not supported yet and i do not know why.can we boot to the phone build in recovery to install custom rom,or we must port CWM first.we can start a project here for CWM recovery.
Click to expand...
Click to collapse
Hi
In case it's still actual there is a thread about the same problem:
http://forum.xda-developers.com/showthread.php?t=2460195&page=4
Hi,
Details about phone: Samsung S6 (G920I) I can't remember the exact ROM im on (yes im a noob). However my build number is LMY47X, which when searched by most views comes up with this rom (http://forum.xda-developers.com/galaxy-w/development/rom-aosp-alpha-1-t3107740) Android version 5.1.1 I have TWRP v. 3.0.2-1 as my custom recovery.
So my phone keeps restarting randomly been getting worse over the past few weeks. So I want to try a new ROM (had my current one for like 8 months). So I made a ROM back up just in case through TWRP and backed up all my user data through Titanium and exported both of it onto my PC.
I found a ROM I want to use "XtreStoLite" ( http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-0-t3094423) but I have a few questions before I try to install it.
First of will this work fine for the current setup I have?
Since I'm on 5.1.1 and they have a ROM version for 6.0.1 will I be able to install this version or do I have to use the 5.1.1 version? I've tried updating to 6.0.1 on my current ROM but my provider won't let me update OTA. Only way is to remove root and return it back to the stock ROM which I don't really want to do if I can avoid it.
Please help, any information will be greatly appreciated, feel free to ask any questions.
jack_fry said:
Hi,
Details about phone: Samsung S6 (G920I) I can't remember the exact ROM im on (yes im a noob). However my build number is LMY47X, which when searched by most views comes up with this rom (http://forum.xda-developers.com/galaxy-w/development/rom-aosp-alpha-1-t3107740) Android version 5.1.1 I have TWRP v. 3.0.2-1 as my custom recovery.
So my phone keeps restarting randomly been getting worse over the past few weeks. So I want to try a new ROM (had my current one for like 8 months). So I made a ROM back up just in case through TWRP and backed up all my user data through Titanium and exported both of it onto my PC.
I found a ROM I want to use "XtreStoLite" ( http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-0-t3094423) but I have a few questions before I try to install it.
First of will this work fine for the current setup I have?
Since I'm on 5.1.1 and they have a ROM version for 6.0.1 will I be able to install this version or do I have to use the 5.1.1 version? I've tried updating to 6.0.1 on my current ROM but my provider won't let me update OTA. Only way is to remove root and return it back to the stock ROM which I don't really want to do if I can avoid it.
Please help, any information will be greatly appreciated, feel free to ask any questions.
Click to expand...
Click to collapse
This ROM will work for your device. Based on what I read in the OP's post on how to install this ROM there are two prerequisites. You will need to use Odin to flash a Marshmallow bootloader and a Marshmallow modem for this ROM to work. This is an excerpt from the ROM's OP:
How-to Install:
Install Marshmallow bootloader & modem and install custom recovery:
- Install the correct MM bootloader & modem for your model with Odin (see post #5 of this thread)
- Make sure that you have an working TWRP custom recovery installed.
If you follow the OP's instructions you should not have any problems. Make sure you read, read and read. The OP has given an excellent guide. Post #5 in this thread has the download links for the Marshmallow bootloader and modem and instructions on what slot to put the files in using Odin. Good luck and happy flashing.
Also, if you wanted to stick with a Lollipop ROM the OP still has links to his Lollipop ROM's available.
Sent from my Nexus 6 using XDA-Developers mobile app
Hello,
So I received this phone from my uncle to "fix" because it kept showing "Lenovo lockscreen has stopped working" nonstop. Now I want to flash a new ROM to it.
What I know about the phone:
Model -Lenovo P780
Android -4.4.2
Build-P780.V101, 2014/03/12 15:06
VIBEUI_V2.0 1437_7.14 1_ST_P780
Recovery -heweikeji CWM-Recovery v6.0.4.4 Modd by heweikeji_yueyue.
It's a CN rom already flashed custom ( I think )
I want to flash a new ROM for him because this one is really clustered ( even after factory reset tons of unnecessary apps )
My question.
What do I need to flash a new rom to this phone?
What rom should I pick? (he's a regular user ).
Do I need to update recovery?
Need the easiest way out possible.
Argus137 said:
Hello,
So I received this phone from my uncle to "fix" because it kept showing "Lenovo lockscreen has stopped working" nonstop. Now I want to flash a new ROM to it.
What I know about the phone:
Model -Lenovo P780
Android -4.4.2
Build-P780.V101, 2014/03/12 15:06
VIBEUI_V2.0 1437_7.14 1_ST_P780
Recovery -heweikeji CWM-Recovery v6.0.4.4 Modd by heweikeji_yueyue.
It's a CN rom already flashed custom ( I think )
I want to flash a new ROM for him because this one is really clustered ( even after factory reset tons of unnecessary apps )
My question.
What do I need to flash a new rom to this phone?
What rom should I pick? (he's a regular user ).
Do I need to update recovery?
Need the easiest way out possible.
Click to expand...
Click to collapse
Look here and read that tutorial about changing your firmware with one still developed.
https://forum.xda-developers.com/lenovo-p780/help/row-cn-how-to-check-t3333532/page2
After that go to development area in MIUI section, mirror 9. There are latest custom firmware stable versions with OTA suport.
Good luck.
I get a SM-J600FN/DS and the stcok firmware are very slow. Now i will root this phone and flash a custom rom. WHich TWRP or OFOX i need and which custom rom are good for this old Phone?
bump same question here.
OP, what did you install?
How did you root this phone ?
Hello,
Hot-Proton said:
I get a SM-J600FN/DS and the stcok firmware are very slow. Now i will root this phone and flash a custom rom. WHich TWRP or OFOX i need and which custom rom are good for this old Phone?
Click to expand...
Click to collapse
I have also a SM-J600FN/DS, I am using OFOX, to first install the lineage-17.1-20210213-UNOFFICIAL-j6lte.zip
[ROM][UNOFFICIAL][j6lte][10] LineageOS 17.1
Install and running was OK, but like written some pb with phone calls.
Then I tried an other lineage-17.1-20200715-UNOFFICIAL-j6lte.zip
install was OK but at first start never trebuchet ended!!!
So, test the Arrow [ROM][10][J600X][ARM64] Arrow OS
Install and running was OK, but like with lineage-17.1-20200715-UNOFFICIAL-j6lte.zip same pb with phone calls.
I am thinking these 2 ROM with call phone pbs are not for the J600FN/DS but for the J600G
At last test the [ROM][10][ARM] YashxOS for Galaxy J6 2018
Install and running was OK and ALSO the phone calls :+)
Its default is to have gapps built in so I would like to root it to remove unwanted apps!
The .apk KingoRoot and kingroot fail to do so! (failed also with the last stock ROM)