Hi!
I was rooting my phone and flashing recovery by tutorial on thumblr with bootloader unlock code from huawei.
I had flashed TWRP because I did all the same as in this tutorial. Today I want to flash on my phone cyanogenmod rom from modaco for example (write "huawei ascend y300 cyanogen mod" in google ).
But if I'm flashing it by TWRP it isn't working (when I'm flashing it there is an error). I have read that I must have CWM to do it, but now is the problem - how can I remove TWRP and install CWM? (Rom manager method isn't working, and when I flash CWM by TWRP it isn't working too). And when I flash CWM with unlock tools from thumblr recovery isn't working.
What can I do?
Sorry for my bad English And sorry for post without links to pages I was writing about but "clever XDA" blocked links for new users :/
If you flashed TWRP Thru Fastboot just flash A CWM image as you would flash A TWRP image
Sent from my HTC Desire C using xda app-developers app
it's working now
I've downloaded wrong ver of rom, the good version works with TWRP. Now can you give me good kernel working with CM 10.1?
And which one of this roms is the best in your opinion? And without video playing and recording issues (artefacts).
modaco.com/topic/365268-all-custom-roms-for-huawei-ascend-y300g510/
help plz :c
help
Huawei y300 cyanogenMod
Hi, i need help plz, flashed my huawei y300 with cyanogenMod using twrp but after phone cannot find simcard!!!!
which version of cm did you flashed?
post link if you can and I'll try to help you
Gliwusss said:
which version of cm did you flashed?
post link if you can and I'll try to help you
Click to expand...
Click to collapse
Hi...could you help me too??
rootet my y100-0100...so i´m looking for a good costum rom but dont know how to flash it
greetz Marc
I have a y300. Can someone help me step by step how to update with cyanogenmod plz
Greetings,
I'm sorry if I'm posting this on a wrong place but I couldn't find a topic describing my problem.
I have Huawei Y300 for a few months now, and recently I installed Cyanogenmod 11 (Kitkat) on it (Root + Clockworkmod Recovery + KitKat + GAPPS).
The look of this ROM is fantastic (compared to the stock) but the performance is terrible (lag, restarts, app crashes...).
Now I would like to downgrade to Cyanogenmod 10.2 or 10.1, hopefully to get more stable and overall better performance.
Here is my procedure:
- I downloaded cyanogenmod 10.1 with gapps and placed it on my SD card.
- Entering the recovery I did a complete wipe/factory reset, formated data, system, cache, dalvik, everything!!
- Finally, I tried to flash new 10.1 but without success. As soon as I "click" on the file I want to flash, several lines of code appear and everything stops returning me to the recovery menu (later today I will upload a screenshot).
I've read on some forums that the "old" kernel install is necessary before trying to downgrade KitKat.
If anyone has the advice/sollution for me, I would appreciate it!
Related
hi!
so i just buy a huawei u8666e and i want to change de rom but when i try to do so, i found that roms like cm or aokp aren't compatible with my phone. so the question is what rom can i install?can i install a rom from another huawei model?
Roms for your phone
hey i'm also using this phone rooted at 4.3 overclocked i am new here so i cant post links man
CWM Recovery Update Epic Fail
Hey people's I'm hoping someone can help me work this one out cos its doing my head in and I'm not real popular at home today... last night I attempted to update my partners CWMR from 5.0.2.8 to 6.0.4.4 on his Huawei Y201 Pro (U8666E-51) unfortunately I kinda failed spectacularly... not only did the new version not take, but afterwards I couldn't get the backup to restore. It got as far as /datadata before erroring out. (Whoops) I have since managed to successfully updated to CMWR 6.0.4.4 and install cyanogen 10, but nothing works right anymore and all his system apps keep force closing, along with parts of the OS is there anything I can do besides buy him a new phone? I have tried everything I can think of, including flashing a stock ROM, but nothing has worked... I would really appreciate any advice... Thanx <3
kernal
i am using kitkat for huawei u8666e or y201 pro one bug is found sim card cannot be detected can you please tell me how can i shift kernal from slim beean 4.3 for this? because that kernal supports sim card...
Thanks
Hello,
I search the forum and did not find any good information about lg l4.i have already rooted the device using vroot.is there any way to install custom rom on the phone.i looked for CWM,but it is not supported yet and i do not know why.can we boot to the phone build in recovery to install custom rom,or we must port CWM first.we can start a project here for CWM recovery.
mistermind said:
Hello,
I search the forum and did not find any good information about lg l4.i have already rooted the device using vroot.is there any way to install custom rom on the phone.i looked for CWM,but it is not supported yet and i do not know why.can we boot to the phone build in recovery to install custom rom,or we must port CWM first.we can start a project here for CWM recovery.
Click to expand...
Click to collapse
Hi
In case it's still actual there is a thread about the same problem:
http://forum.xda-developers.com/showthread.php?t=2460195&page=4
Hi All,
Sorry if the same question is being asked over and over again, but I am not able to find correct solution for my problem.
Well, the basic problem is status -7 error. but I want to know if I am using the correct version of CWM, ROM etc.
My Mobile model: GT I9300(Indian model- GSM)
Android version-4.3
baseband versionI9300DDUGNB1
Kernel - 3.0.31-2363855
Build # JSS15J.I9300XWUGML4
ClockworkMod recovery v6.0.3.2
ROM Manager Version 5.5.3.7
CMW Manger v3.55
Roms I tried to install are cm-11-20140918-NIGHTLY-i9300.zip and Paranoid Android downloaded from the below links respectilvey:
http://forum.xda-developers.com/galaxy-s3/orig-development/rom-cyanogenmod-9-nightly-builds-t1714354
and http://forum.xda-developers.com/galaxy-s3/orig-development/aospaandroid-4-4-2-kvt49l-t1745003.
With the help of Root checker i can say that the Root is granted properly.
Is my recovery version good? Coz, i have used a prior version( 3.xx) and it was working fine(though it was showing status 7 error), ie., for backup and restore, but in the version6.0.3.2, even taking a backup isn't properly done.
also, are the ROMS am using correct for my S3?
Please help me install new ROM.
TIA.
Agnel said:
Hi All,
Sorry if the same question is being asked over and over again, but I am not able to find correct solution for my problem.
Well, the basic problem is status -7 error. but I want to know if I am using the correct version of CWM, ROM etc.
My Mobile model: GT I9300(Indian model- GSM)
Android version-4.3
baseband versionI9300DDUGNB1
Kernel - 3.0.31-2363855
Build # JSS15J.I9300XWUGML4
ClockworkMod recovery v6.0.3.2
ROM Manager Version 5.5.3.7
CMW Manger v3.55
Roms I tried to install are cm-11-20140918-NIGHTLY-i9300.zip and Paranoid Android downloaded from the below links respectilvey:
http://forum.xda-developers.com/galaxy-s3/orig-development/rom-cyanogenmod-9-nightly-builds-t1714354
and http://forum.xda-developers.com/galaxy-s3/orig-development/aospaandroid-4-4-2-kvt49l-t1745003.
With the help of Root checker i can say that the Root is granted properly.
Is my recovery version good? Coz, i have used a prior version( 3.xx) and it was working fine(though it was showing status 7 error), ie., for backup and restore, but in the version6.0.3.2, even taking a backup isn't properly done.
also, are the ROMS am using correct for my S3?
Please help me install new ROM.
TIA.
Click to expand...
Click to collapse
You will need this CM11 version, better Snapshot than Nightly: https://download.cyanogenmod.org/?device=i9300
Than you will also need the latest recovery, I prefer Philz Touch Recovery: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/philz_touch_6.48.4-i9300.tar.md5 (flash it in odin)
Last I would recommand a Googy-Max Kernel like this one here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/philz_touch_6.48.4-i9300.tar.md5
Agnel said:
Hi All,
Sorry if the same question is being asked over and over again, but I am not able to find correct solution for my problem.
Well, the basic problem is status -7 error. but I want to know if I am using the correct version of CWM, ROM etc.
My Mobile model: GT I9300(Indian model- GSM)
Android version-4.3
baseband versionI9300DDUGNB1
Kernel - 3.0.31-2363855
Build # JSS15J.I9300XWUGML4
ClockworkMod recovery v6.0.3.2
ROM Manager Version 5.5.3.7
CMW Manger v3.55
Roms I tried to install are cm-11-20140918-NIGHTLY-i9300.zip and Paranoid Android downloaded from the below links respectilvey:
http://forum.xda-developers.com/galaxy-s3/orig-development/rom-cyanogenmod-9-nightly-builds-t1714354
and http://forum.xda-developers.com/galaxy-s3/orig-development/aospaandroid-4-4-2-kvt49l-t1745003.
With the help of Root checker i can say that the Root is granted properly.
Is my recovery version good? Coz, i have used a prior version( 3.xx) and it was working fine(though it was showing status 7 error), ie., for backup and restore, but in the version6.0.3.2, even taking a backup isn't properly done.
also, are the ROMS am using correct for my S3?
Please help me install new ROM.
TIA.
Click to expand...
Click to collapse
Error 7 means your recovery is to old to flash kitkat roms
Your recovery needs to be updated to install any kitkat roms.
Darke5tShad0w said:
Error 7 means your recovery is to old to flash kitkat roms
Your recovery needs to be updated to install any kitkat roms.
Click to expand...
Click to collapse
Can you please point me to the latest recovery. Coz i tried too many and still the same error.
TIA
Look for philz in development.
Hi everyone, I have a problem with my Lg L9 II, it's the the stock rom but updated on 4.4.2 (KitKat).I have some bugs on my phone and it's a bit slower.I want to the install my original rom 4.1.2, I dowloaded him from your forum but when I transfer on SD Card and open CWM with the button volume up and power key I get the block ( I take picture and she is in attachment). I don't have a root. Can anyone explain me how to fix that, that I can install my original rom with CWM or TWRP. I hope so that You can help me, and sorry if the that thread is duplicate, I'm new here and don't know how it's work. Thanx in advice.
Kind Regards
did you had CWM installed!?
if you want "original" ROM (from LG), install the 4.4.2_V20g version via KDZ install (20g is the best version in my experience).
if you want cwm or twrp to experiment custom roms.... a good start: http://forum.xda-developers.com/showthread.php?t=2730501
Cisf said:
did you had CWM installed!?
if you want "original" ROM (from LG), install the 4.4.2_V20g version via KDZ install (20g is the best version in my experience).
if you want cwm or twrp to experiment custom roms.... a good start: http://forum.xda-developers.com/showthread.php?t=2730501
Click to expand...
Click to collapse
I don't have CWM Instaled, When I want get inside CWM I have message from picture in attachment. Now I have instaled that version 4.4.2 v20g but it's not good in my case,I want to restore my original softwear 4.1.2. but I don't know how to do that.
alen922008 said:
I don't have CWM Instaled, When I want get inside CWM I have message from picture in attachment. Now I have instaled that version 4.4.2 v20g but it's not good in my case,I want to restore my original softwear 4.1.2. but I don't know how to do that.
Click to expand...
Click to collapse
You need to flash the respective V10x kdz(according to your region). V20 is KitKat. V10 is JellyBean.
Hi everyone,
Well, I came to you because actually I'm out of idea.
I was since 3 years on custom ROM (CM and Lineage OS) and due to substratum, I had a bootloop.
My problem is quite particular, after a total clean of my device and flashing the stock ROM, custom recovery cause me some trouble.
Whatever I try (CWM touch 6 or TWPR 3.1.1), I can't flash custom ROM (Lineage OS 14.1), TWPR or CWM crash 1 second after the flash command and reboot, with disable touchscreen and even by using old navigation way and try again, same problem.
Tried also to disable file signature check but no effect.
Quick summary about what I did:
- Device: Samsung Galaxy S4 (GT-I9505)
- ROM stock used: I9505XXUHOJ2 ( the build which is based on the CF-Root file i used)
- Tried to install CWM by ROM Manager and ODIN (v3.09)
- TWPR installed by TWPR App using file in .img and not the second option (tar.img) for LTE Internationnal Qualcomm.
-Checked the root before last attemptwith root checker and it was ok.
In advance thanks for your help and I really hope it's not too serious.
By the way, sorry for my english, it's not my native language
Sinistros said:
Hi everyone, Well, I came to you because actually I'm out of idea. I was since 3 years on custom ROM (CM and Lineage OS) and due to substratum, I had a bootloop.
My problem is quite particular, after a total clean of my device and flashing the stock ROM, custom recovery cause me some trouble. Whatever I try (CWM touch 6 or TWPR 3.1.1), I can't flash custom ROM (Lineage OS 14.1), TWPR or CWM crash 1 second after the flash command and reboot, with disable touchscreen and even by using old navigation way and try again, same problem...
Click to expand...
Click to collapse
I don't have this variant but, this looks like it may be a recovery issue so your best bet is to post this question within the following Official TWRP thread for your device.
https://forum.xda-developers.com/showthread.php?t=2468187
If it's a LineageOS issue, then your best bet is to post this question within the following Official LineageOS thread for your device.
https://forum.xda-developers.com/showthread.php?t=3573386
If all else fails, you can try posting your question within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=2192886
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Thanks for advice
I will post in the S4 forum section hoping someone already know a fix or a way to dodge this problem.
But I have small questions before:
I saw some threads about CWM and TWPR recovery "for" I9505, is there a huge difference between them and their basic version ?
And finally, I saw some threads on TWPR 3.+ issue for some devices.
An installation of an older version of TWPR or CWM could be a good way to explore the problem source ? (the stock ROM I use even after updates is quite old in terms of Android versions and patch)
Have a good day
Edited*
Sorry had a bug and got a double post