Hi everyone, I have a problem with my Lg L9 II, it's the the stock rom but updated on 4.4.2 (KitKat).I have some bugs on my phone and it's a bit slower.I want to the install my original rom 4.1.2, I dowloaded him from your forum but when I transfer on SD Card and open CWM with the button volume up and power key I get the block ( I take picture and she is in attachment). I don't have a root. Can anyone explain me how to fix that, that I can install my original rom with CWM or TWRP. I hope so that You can help me, and sorry if the that thread is duplicate, I'm new here and don't know how it's work. Thanx in advice.
Kind Regards
did you had CWM installed!?
if you want "original" ROM (from LG), install the 4.4.2_V20g version via KDZ install (20g is the best version in my experience).
if you want cwm or twrp to experiment custom roms.... a good start: http://forum.xda-developers.com/showthread.php?t=2730501
Cisf said:
did you had CWM installed!?
if you want "original" ROM (from LG), install the 4.4.2_V20g version via KDZ install (20g is the best version in my experience).
if you want cwm or twrp to experiment custom roms.... a good start: http://forum.xda-developers.com/showthread.php?t=2730501
Click to expand...
Click to collapse
I don't have CWM Instaled, When I want get inside CWM I have message from picture in attachment. Now I have instaled that version 4.4.2 v20g but it's not good in my case,I want to restore my original softwear 4.1.2. but I don't know how to do that.
alen922008 said:
I don't have CWM Instaled, When I want get inside CWM I have message from picture in attachment. Now I have instaled that version 4.4.2 v20g but it's not good in my case,I want to restore my original softwear 4.1.2. but I don't know how to do that.
Click to expand...
Click to collapse
You need to flash the respective V10x kdz(according to your region). V20 is KitKat. V10 is JellyBean.
Related
Hi Guys,
I searched the threads for T Mobile G2 updates but i couldnt find the right information.
I have the T-Mobile G2 and i wish to install custom ROMS for HTC Hero, or the STOCK ROMS. but i cant. How can I install? Can anyone help me or send me links to HOW TO's...?
Do I first need to Root the G2?
Is it even possible to install Hero ROMS on the G2?
Thanks in Advance!
gr Haru
If u wanna Install custom ROM then go for MoDaco http://forum.xda-developers.com/showthread.php?t=552591 Read it and fallow the instruction. I have got T-mobile G2 with MoDaco ROM and its much better than factory one. I don't think there is any different betwen Hero and G2. Hardware should be the same which is the most important.
If you want to go official then you need to wait for t-mobile version ROM. Just check sometimes www.htc.com --> support.
Foka002 said:
If u wanna Install custom ROM then go for MoDaco http://forum.xda-developers.com/showthread.php?t=552591 Read it and fallow the instruction. I have got T-mobile G2 with MoDaco ROM and its much better than factory one. I don't think there is any different betwen Hero and G2. Hardware should be the same which is the most important.
If you want to go official then you need to wait for t-mobile version ROM. Just check sometimes www.htc.com --> support.
Click to expand...
Click to collapse
Thank you for your response!!!!
Need stock recovery image!!
hey guys i was getting ready to root my t mobile g2 and my daughter opened my clockwork ROM manager and installed the custom recovery image before i was able to permanently root my g2. Does anyone have the stock recovery image so i can re flash it?
nousdefions7sfg said:
hey guys i was getting ready to root my t mobile g2 and my daughter opened my clockwork ROM manager and installed the custom recovery image before i was able to permanently root my g2. Does anyone have the stock recovery image so i can re flash it?
Click to expand...
Click to collapse
if you didn't root yet when you reboot it shouldn't have the custom recovery img
So I'm sorry if I shouldn't be creating a new thread for this. It's a pretty unique situation and I couldn't find it anywhere.
I had upgraded my P500 to official 2.3.3. I then decided "hey, I should try out some custom roms because this sucks...". I rooted with SuperOneClick, managed to install Clockworkmod recovery and the set out to find a nice new rom. I soon discovered that there weren't really any exciting ones that piqued my interest because of the new baseband. The baseband thing is also confusing the heck out of me. Anyways, I managed to KDZ Updater back to my stock firmware because I figured I might as well do something good out of this. So now I'm on 2.2.1, specifically LG v10v. This is a Koodo phone if that helps at all. Also, I'm pretty sure CWM is now wiped and super user access is gone too. Spent a good amount of time putting everything back on the silly thing yesterday lol.
First question: Am I now on new baseband or old baseband (having flashed with
KDZ)?
2nd: I keep seeing references to baseband 10 or 20 followed by a letter. Am I on baseband 10v? If I want to use a custom rom, do I need to change it to 10 a,b or c or something like that.
3rd: Seems like mixed reviews on this one all over the place. Can Rom Manager be successfully used on the P500 to install CWM or does it brick it?
Any other info you can think of would be terribly helpful. Please go easy on me! I'm not sure if I made a mistake by creating this post or not...
You can use RomManager to flash cwm, in the past you could softbrick your phone, but this issue is already solved.
With froyo you are on old baseband, so you can use almost any custom rom for old baseband. No need to flash any baseband for these roms.
Sent from my LG-P500 using XDA App
Hello Crispus222 !
If you are on stock 2.2.1 V10v flashed by KDZ, you have the old baseband.
So if you wanna try custom ROMs you should search those who support the old BB.
But don't forget that you can change baseband without flash stock ROM via KDZ.
ROM Manager flash cwm recovery without problems on rooted phone, I have done this many times
1) Old baseband. If you've used a full stock 2.2.1 or lower rom, than you're on the old baeband now.
2) I'm on the old baseband and mine is 10v. So I'm assuming you're now on the old baseband! Congratulations!
3) Yes. ROM Manager CAN be used on the LG Optimus one whether you have the old or new basebands. Just install ROM manager, choose flash ClockworkMOD and then scroll down to "LGE Optimus One" and hit flash. After that, boot into recovery and you're done!
enjoy all goodies .
u r on old baseband after kdz flash.
now root using z4root . (file sharing sites remember!)
install rom manager from market and install cwm recovery n yeah it works without a glitch but its ur luck too.
reboot into recovery n there u go !
Crispus222 said:
So I'm sorry if I shouldn't be creating a new thread for this. It's a pretty unique situation and I couldn't find it anywhere.
I had upgraded my P500 to official 2.3.3. I then decided "hey, I should try out some custom roms because this sucks...". I rooted with SuperOneClick, managed to install Clockworkmod recovery and the set out to find a nice new rom. I soon discovered that there weren't really any exciting ones that piqued my interest because of the new baseband. The baseband thing is also confusing the heck out of me. Anyways, I managed to KDZ Updater back to my stock firmware because I figured I might as well do something good out of this. So now I'm on 2.2.1, specifically LG v10v. This is a Koodo phone if that helps at all. Also, I'm pretty sure CWM is now wiped and super user access is gone too. Spent a good amount of time putting everything back on the silly thing yesterday lol.
First question: Am I now on new baseband or old baseband (having flashed with
KDZ)?
2nd: I keep seeing references to baseband 10 or 20 followed by a letter. Am I on baseband 10v? If I want to use a custom rom, do I need to change it to 10 a,b or c or something like that.
3rd: Seems like mixed reviews on this one all over the place. Can Rom Manager be successfully used on the P500 to install CWM or does it brick it?
Any other info you can think of would be terribly helpful. Please go easy on me! I'm not sure if I made a mistake by creating this post or not...
Click to expand...
Click to collapse
You are and have always been on OLD baseband as you have to flash the new one in a seprate step.roms don't come with any baseband included.10v\or\10s don't matter as that is OLD baseband.20g\or\20a is new baseband.Rom manager can Install CWM recovery on any p-500 sccuessfully.I would ROOT 1st before installing.The brick comes from flashing a corrupt (over the air) downloaded rom & flashing that.TWRP 1.1.1.1.XL is my choice for recovery but CWM is fine.The LGDMP tool is also my choice for flashing baseband & rescue my phone when things go wrong.ROMs run on either old baseband or new but the newer ones run both (but download the link you are going to run)choice.Hope this helps !
Thanks so much everyone! I appreciate the help a lot.
Hi!
I was rooting my phone and flashing recovery by tutorial on thumblr with bootloader unlock code from huawei.
I had flashed TWRP because I did all the same as in this tutorial. Today I want to flash on my phone cyanogenmod rom from modaco for example (write "huawei ascend y300 cyanogen mod" in google ).
But if I'm flashing it by TWRP it isn't working (when I'm flashing it there is an error). I have read that I must have CWM to do it, but now is the problem - how can I remove TWRP and install CWM? (Rom manager method isn't working, and when I flash CWM by TWRP it isn't working too). And when I flash CWM with unlock tools from thumblr recovery isn't working.
What can I do?
Sorry for my bad English And sorry for post without links to pages I was writing about but "clever XDA" blocked links for new users :/
If you flashed TWRP Thru Fastboot just flash A CWM image as you would flash A TWRP image
Sent from my HTC Desire C using xda app-developers app
it's working now
I've downloaded wrong ver of rom, the good version works with TWRP. Now can you give me good kernel working with CM 10.1?
And which one of this roms is the best in your opinion? And without video playing and recording issues (artefacts).
modaco.com/topic/365268-all-custom-roms-for-huawei-ascend-y300g510/
help plz :c
help
Huawei y300 cyanogenMod
Hi, i need help plz, flashed my huawei y300 with cyanogenMod using twrp but after phone cannot find simcard!!!!
which version of cm did you flashed?
post link if you can and I'll try to help you
Gliwusss said:
which version of cm did you flashed?
post link if you can and I'll try to help you
Click to expand...
Click to collapse
Hi...could you help me too??
rootet my y100-0100...so i´m looking for a good costum rom but dont know how to flash it
greetz Marc
I have a y300. Can someone help me step by step how to update with cyanogenmod plz
Greetings,
I'm sorry if I'm posting this on a wrong place but I couldn't find a topic describing my problem.
I have Huawei Y300 for a few months now, and recently I installed Cyanogenmod 11 (Kitkat) on it (Root + Clockworkmod Recovery + KitKat + GAPPS).
The look of this ROM is fantastic (compared to the stock) but the performance is terrible (lag, restarts, app crashes...).
Now I would like to downgrade to Cyanogenmod 10.2 or 10.1, hopefully to get more stable and overall better performance.
Here is my procedure:
- I downloaded cyanogenmod 10.1 with gapps and placed it on my SD card.
- Entering the recovery I did a complete wipe/factory reset, formated data, system, cache, dalvik, everything!!
- Finally, I tried to flash new 10.1 but without success. As soon as I "click" on the file I want to flash, several lines of code appear and everything stops returning me to the recovery menu (later today I will upload a screenshot).
I've read on some forums that the "old" kernel install is necessary before trying to downgrade KitKat.
If anyone has the advice/sollution for me, I would appreciate it!
Hello,
I search the forum and did not find any good information about lg l4.i have already rooted the device using vroot.is there any way to install custom rom on the phone.i looked for CWM,but it is not supported yet and i do not know why.can we boot to the phone build in recovery to install custom rom,or we must port CWM first.we can start a project here for CWM recovery.
mistermind said:
Hello,
I search the forum and did not find any good information about lg l4.i have already rooted the device using vroot.is there any way to install custom rom on the phone.i looked for CWM,but it is not supported yet and i do not know why.can we boot to the phone build in recovery to install custom rom,or we must port CWM first.we can start a project here for CWM recovery.
Click to expand...
Click to collapse
Hi
In case it's still actual there is a thread about the same problem:
http://forum.xda-developers.com/showthread.php?t=2460195&page=4
Hello,
So I received this phone from my uncle to "fix" because it kept showing "Lenovo lockscreen has stopped working" nonstop. Now I want to flash a new ROM to it.
What I know about the phone:
Model -Lenovo P780
Android -4.4.2
Build-P780.V101, 2014/03/12 15:06
VIBEUI_V2.0 1437_7.14 1_ST_P780
Recovery -heweikeji CWM-Recovery v6.0.4.4 Modd by heweikeji_yueyue.
It's a CN rom already flashed custom ( I think )
I want to flash a new ROM for him because this one is really clustered ( even after factory reset tons of unnecessary apps )
My question.
What do I need to flash a new rom to this phone?
What rom should I pick? (he's a regular user ).
Do I need to update recovery?
Need the easiest way out possible.
Argus137 said:
Hello,
So I received this phone from my uncle to "fix" because it kept showing "Lenovo lockscreen has stopped working" nonstop. Now I want to flash a new ROM to it.
What I know about the phone:
Model -Lenovo P780
Android -4.4.2
Build-P780.V101, 2014/03/12 15:06
VIBEUI_V2.0 1437_7.14 1_ST_P780
Recovery -heweikeji CWM-Recovery v6.0.4.4 Modd by heweikeji_yueyue.
It's a CN rom already flashed custom ( I think )
I want to flash a new ROM for him because this one is really clustered ( even after factory reset tons of unnecessary apps )
My question.
What do I need to flash a new rom to this phone?
What rom should I pick? (he's a regular user ).
Do I need to update recovery?
Need the easiest way out possible.
Click to expand...
Click to collapse
Look here and read that tutorial about changing your firmware with one still developed.
https://forum.xda-developers.com/lenovo-p780/help/row-cn-how-to-check-t3333532/page2
After that go to development area in MIUI section, mirror 9. There are latest custom firmware stable versions with OTA suport.
Good luck.