Related
Hi there!
I didn't put a screen protector on my TD2 -and over time it has become more scratched than expected. I'd like to replace the front display -I guess that is the one called the digitizer, or?
http://cgi.ebay.com/Touch-Screen-Di...wItemQQptZPDA_Accessories?hash=item4837633bd0
What are the chances for getting an original HTC at ebay?
Did anybody do this replacement with success?
Cheers
No one?
check this out too!!!
more expensive and not a word about oem product!!!
So... oem digitizer with just 19$ .... hmmmm! don't know!!!!
Perhaps this guide can help you.
Hopefully it's not permanently attached to the LCD like the ATT Fuze is. I took my Fuze apart and destroyed the LCD while trying to install a new digitizer. Apparently they use some sort of extremely strong glue between the digitizer and LCD...
Hopefully not.. But I think it's only glued to the frame.. I don't really know what kind of glue to use for the new one though...
ren28 said:
Hopefully it's not permanently attached to the LCD like the ATT Fuze is. I took my Fuze apart and destroyed the LCD while trying to install a new digitizer. Apparently they use some sort of extremely strong glue between the digitizer and LCD...
Click to expand...
Click to collapse
Sorry to tell you all that the Digitizer is permanently attached with LCD. I know this because I was drop my D2 and went to service center. They change to front cover (case) which was broken when droped. when I get it back they give me back my old front cover and I notice that the digitizer is stick with over part.....
When I ask the service's counter. They told me that they have to change the new digitizer because it come with whole part.. not saparated.
Sorry for my english....
Hi Guide144, you say that when you got the digitizer back it sticked with the 'over part'. To my ears that sounds like the FRAME and not the LCD? Are you sure that it's also attached to the LCD?
niknik76 said:
Hi Guide144, you say that when you got the digitizer back it sticked with the 'over part'. To my ears that sounds like the FRAME and not the LCD? Are you sure that it's also attached to the LCD?
Click to expand...
Click to collapse
Sorry for lag of my understanding, Yes the digitizer is stick with front frame, not a LCD. In my case, I ask the service to change my front cover because it broke and they change the front cover + digitizer.... because it stick together.
Hope this would clear all out.
Hi guys,
i replaced today the broken digitizer of my topaz.
Got one for $60 from ebay, with a screen (i wasn't sure if it was a screen problem or digitizer so i got both.)
you need to unstick the old one from the housing and attach the new one. i didn't use extra glue/stick , since the old one was left on the casing.
cheers
Thanks mistral82cy! Thanks for sharing -now I feel a little more up to going ahead with the operation
Hi! Could you please tell me how much the service center charged you to get the new cover and digitizer installed?
I've to change mine, as well!
Thanks a lot
I would suggest finding the parts list for the phone and finding out exactly what digitizer is needed then buy one online from somewhere such as e-bay. I did this with my G1 replaced it myself and it worked wonderfully. Research before you buy otherwise you might end up buying the wrong one or a clone which doesnt work as well
I dun it myself, buying one digitizer from ebay, getting the old one out was a little tricky , but appart from that it was easy(and i had to do it again, as i dit not secure it properly and there was dust comming underneath the screen from the sides. Any questions you could ask, but it is pretty straight forward.
pistonripper changed his housing, so he would have also replaced his digitizer, so you might want to check with him
http://forum.xda-developers.com/showthread.php?t=572728
If you want to buy one, this would be a good choice
http://cnn.cn/shop/touch-diamond2-digitizer-p-6733.html
replace digitizer on your own!
Hello everyone!
My digitizer broke last week, because i droped my Diamond!
But don't worry I am a rookie in technical things and I managed it to replace my digitizer on my own.
Don't waste money on repair charge from repairshops! Ok... you loose your garantie but the Cellphone is allready old. The new HD2 is already available!
Just buy the digitizerscreen at ebay... i've paid 60 € and then use this manual:
http://www.pdacenter.ru/razborka/htc-touch-diamond2/
Now it works like before.
Bye Ghostina
HTC Pure Digitizer or LCD
i just got my new AT&T HTC Pure and somehow my screen is cracked. The LCD does not appear to have any bleeding or damage and the touch features work, but I have two cracks from top to bottom on my phone. what are your thoughts. I attached some pictures
darkside896 said:
i just got my new AT&T HTC Pure and somehow my screen is cracked. The LCD does not appear to have any bleeding or damage and the touch features work, but I have two cracks from top to bottom on my phone. what are your thoughts. I attached some pictures
Click to expand...
Click to collapse
It's a bit hard to see on the photos but if its new can you not return it? if not then you need to look closely between the digitizer and the screen and see if the damage is just the top layer or the screen, if it is the top layer then just replace your digitizer!
spammer said:
It is easy to do it, if you need, I can send you the instruction that how to change it to you. You can visit my website --spam-- for this product Touch Screen Digitizer For HTC Touch Diamond 2 II T5353
Hope that it will help you.
thanks
Click to expand...
Click to collapse
Every single post of yours is a website promotion.
Chill.
Out.
Seriously.
As always this site is a big help. Just ordered the items, and thanks to the guide I'm fairly confident I will pull it off. For me the bottom 2cm's of the screen have shifted about 1cm to the left somehow. The digitizer still works "perfectly" but it's kinda hard to hit the right buttons like that
Hello Guys,
i have a problem, i had already replaced the LCD-Screen because the old was broken.
But now i got a new problem... if i place the new screen on the digitalizer i got a glimer on the display. I don't now why. But i already discoverd that this effect only appearce if the LCD-Screen is on the digitalizer..
So what is the exactly reason and how can i fix this problem? Is the digitalizer cracked?
Here are 3 Pictures, one is without the digitalizer.
Thank You,
PS: Sorry for my bad english
did you try to fit digitizer in or just holding it upon the lcd?
what would happen if you rotate it 90degs?
are you sure there is no protection foil still on the lcd???
-
behind and on the lcd, there are reflection foils, bluring, light redirecting, polarizating. maybe 6 of them together. some are glued on screen, some are just below it. obviously there is something in digitizer as well, and those in your replaced lcd are not compatible with digitizer.
can you ask for return of the lcd and get another one?
the other option would be getting replacement of digitizer from the same shop.
or third, this effect doesn't look like it's from polarizator. polarizator is glued but those others are not. if it will not change if you rotate it, like with polarizator effect, means it's not polarizator and you can replace those other foils from below lcd. putting ones from your broken screen to the new one. It's quite difficult, but could be done.
okay.. if i rotate the digitalizer the effect changes..
in nearly 90 degree the effect is better than normal.. but not really good..
so is there a magnetism issue??
or whats the reason for this effect?..
could the digitalizer broken? but it's still working..
the display brokes because of violence..
could the digitalizer although broken??
no the digitizer is fine.
the replacement you get was not oem. means was not from the same factory.
someone working in there made some pictures or paintings of the lcd and showed it to his friend who owns a similar factory. He then made this lcd and sold it to you. As he didn't know what sort of, let's call them optic foils, have been used in the original he just put the ones he new were working fine with another mobile. But he didn't expect, as i am surprised too, that the digitizer have an optic foil inside as well. But before realizing, I suppose they already gave bonus to all those little workers and started overnight secret manufacture.
Before realizing the mistake, they already produced a lot of it. To cut the loses, I suppose they created a set of digitizers with a similar practice, which they would sell together with lcd and would be working good.
Now someone, your seller probably thought selling separate lcd would be ok too, so he did. That's why i was suggesting you have right to have an replacement, refund or an new digitizer from him at a fair price.
Of course don't take me too serious on the picture/painting matter, but otherwise I wouldn't be surprised if I came to true quite close
anyway those fake parts are a good quality and in most cases you wouldn't say difference. But shyt happens
as the rotating didn't solve issue completely problem would be those foils below lcd. if your seller would not be cooperative, you've got nothing to loose. open both lcds and change foils over.
Or get a fake digitizer which you would be sure is compatible with that screen.
If not successful, get a combo, lcd + digitizer.
hmm okay..
in the description is written original htc ware..
i had send my seller that problem and now we will see..
thanks a lot for those information..
I would be very interested in knowing how you got the digitizer and screen seperated? Arent they glued and most likely going to break easy?
did you mean the digitalizer and the lcd display or the front screen?
I opened one up once and the LCD appeared to be glued on to the back of the front screen (which I assume is the digitizer?)
ah okay.. eeerm.. i don't know that the lcd was glued on the digitalizer.. because my display has broken and the liquid was out of the display.. so the LCD was easy to take off..
But I've read some guys has warmed it firstly with a hair dryer and then they could take the display off..
hx4700 Killer said:
I opened one up once and the LCD appeared to be glued on to the back of the front screen (which I assume is the digitizer?)
Click to expand...
Click to collapse
you make me want to open ma rhodium.
if it's glued use a razor, or heat gun & blade like on apples.
then clean it and put new tape.
fake3 said:
ah okay.. eeerm.. i don't know that the lcd was glued on the digitalizer.. because my display has broken and the liquid was out of the display.. so the LCD was easy to take off..
But I've read some guys has warmed it firstly with a hair dryer and then they could take the display off..
Click to expand...
Click to collapse
yeah dryer is maybe more safe just keep it below 100 cels. but it's not so vulnerable on bending too.
fake3: you sure you don't have protector foil on that lcd you bought?
i been playing around and get similar efect with a protection foil below polaroid.
there was still one protection foil on the front of the lcd.. but i already removed this foil..
but can you make a picture where the foil the polaroid is??
fake3 said:
there was still one protection foil on the front of the lcd.. but i already removed this foil..
but can you make a picture where the foil the polaroid is??
Click to expand...
Click to collapse
I was playing with just a generic foils. not rhodium.
They can put filters inside plastic nowadays. and mix even more of them and it's all still tiny.
If there is one in digitizer, it would cut sun reflections of lcd and would make good sense.
Glass could be tented, too. digitizer is usually one glass and one foil.
even if you would find something glued on lcd or digitizer, it's not possible to take it of without damage. I talked to people producing foils and applying them they can't take that off too.
There have you be one polarizer glued on front of lcd, otherwise you would see nothing. And they usually gluing one on back. That make the light more efficient. redirect light in useful directions, but is not necessary, that is another possible difference in your case. And probable, because it spares $ and space. But it's glued - no help there if that's the case.
but then there are all those which are dispersing light evenly, those you can try to change. They all have to be used in a set working together they create
something called Brewster condition, if that's not met, you see something like you see on your screen. every active foil is a part of it, and obviously there is something in your digitizer.
Just had another though, there is a small chance that htc decided to change factory or producing process themselves. and both are original. But I wouldn't say that's very probable.
So guys,
i solved the problem..
I bought an new Digitalizer from the same seller and now it works fine..
Thanks a lot for the hint with the different manufractures..
Greetz
happy to hear that
no worries
guys.. i wan to ask something..
my LCD is glued to my digitizer. since both of it is broken.. i juz throw the whole part away.
but then, i diden really glue my new / replacement LCD to my digitizer.
so i assume they did have some space in between.
although my rhodium works well now, but my digitizer only able to sense fingernail o stylus only. anything a tad bigger than fingernail, it wont pick up. neither my thumb nor my finger.
is this possible due to the space in between the screen made it so? or my digitizer was some lousy quality stuff?
devalian said:
guys.. i wan to ask something..
my LCD is glued to my digitizer. since both of it is broken.. i juz throw the whole part away.
but then, i diden really glue my new / replacement LCD to my digitizer.
so i assume they did have some space in between.
although my rhodium works well now, but my digitizer only able to sense fingernail o stylus only. anything a tad bigger than fingernail, it wont pick up. neither my thumb nor my finger.
is this possible due to the space in between the screen made it so? or my digitizer was some lousy quality stuff?
Click to expand...
Click to collapse
The digitizer is a seperate part from the screen. It sends X - Y coords to the device letting it know where you pressed and the device coorelates that to what was on the screen where you pressed.
What I am saying is that you could have the two pieces seperated the screen in one place on the digitizer in another and you should still be able to press on the digitizer and have the device react appropriately.
The digitizer works independantly from the screen.
haha.. so in short.. it means by digitizer is lousy rite?
I Have de same problem, I need a new lcd screen but i dont know where buy
please help me
and i need the service manual
Thks
hi
I have some scratchs on my screen and I am looking for a replacement digtizer.
I found several on ebay,
http://shop.ebay.com/i.html?_nkw=xp...+screen&_osacat=0&_trksid=p3286.c0.m270.l1313
Have anyone replaced the digitizer or know if this are original?
Thanks!
Did you remove the factory screen protector for some reason and not replace it? Or did your phone not come with a factory screen protector?
ClintonH said:
Did you remove the factory screen protector for some reason and not replace it? Or did your phone not come with a factory screen protector?
Click to expand...
Click to collapse
Hi
I removed the factory screen protector. when I got a couple of scratches I applied a new protector.
But the few scratches I have are ittitating me!!!!
Hi, I recently changed my digitizer. Put on a black one on my white phone. They are all real, I have not seen any fakes around. I also bought mine off of ebay.
--duplicate--
I wish one of these ebay listings gave a part number or model number for the digitizer... for obvious reasons.
trojjanhorse said:
Hi, I recently changed my digitizer. Put on a black one on my white phone. They are all real, I have not seen any fakes around. I also bought mine off of ebay.
Click to expand...
Click to collapse
Is this digitizer is the same part i need to change when my screen gets cracked ?
The story is my phone fell down and the screen got cracked and kinda ink appeared around the line of crack..
I was really wandering which part to change since the touch was working fine..
sent from my x10i that is banging for a 2.1 upgrade. ...
mezo9090 said:
Is this digitizer is the same part i need to change when my screen gets cracked ?
The story is my phone fell down and the screen got cracked and kinda ink appeared around the line of crack..
I was really wandering which part to change since the touch was working fine..
sent from my x10i that is banging for a 2.1 upgrade. ...
Click to expand...
Click to collapse
Hey Mezo,
The digitizer is factory glued with the top glass and is considered one piece since you can't separate the two. The LCD is separate from the digitizer. If your LCD is cracked, then your display will be distorted with lines across the screen. If your top glass is cracked, then your digitizer will still work since the digitizer is not as fragile as the top glass. So the question is, is the top glass cracked? Is the LCD display cracked as well? I know your digitizer will still be functioning but you might want to consider buying a new one as for the cracks may be unappealing and annoying.
I simply broke the top glass and I did not like the crack spanning across my screen so I got myself a new one.
If your LCD is damaged then you need to buy a new LCD which is not cheap... (over $100).
@trojjanhorse
the top layer which i touch is functional, so that means i have broken the LCD ?
i appreciate if you have a look on them i attached some pic, i hope they are clear enough since i took them with 3mp cam
thanks for the help in advance, i don't know much about mobile displays
mezo9090 said:
@trojjanhorse
the top layer which i touch is functional, so that means i have broken the LCD ?
i appreciate if you have a look on them i attached some pic, i hope they are clear enough since i took them with 3mp cam
thanks for the help in advance, i don't know much about mobile displays
Click to expand...
Click to collapse
Most likely you have broken the LCD. When dark pixels appear like that, it usually means that you've directly struck the LCD itself and damaged that area.
It was a thin line at first then some Ink started to flow and became bigger the next day.
So its the LCD?
should I fix it at the service center or i can replace it myself?
sent from my x10i that is banging for a 2.1 upgrade. ...
You can, in theory, fix it yourself but it'll be a biatch of a job. Use the X10 undressing post to find out how to actually take it to bits...
Then put the new LCD in.
only issue is finding somewhere that sells them... I don't know if they're a generic 854x480 lcd or what so...
To change LCD is very simple, but to change the digitizer is suicide. You will need to get a new LCD. I would buy one off of ebay and install it myself. I've been fixing phones for 2 years now so I had my share of experience but it may be difficult for you. The black liquid is due to the fact that LCD stands for "Liquid" Crystal Display
Good luck.
Hi,
I damaged my LCD screen but not the glass digitizer. I ordered a replacement LCD screen and it has arrived.
I have seen several guides to replacing the digitizer on the Galaxy Tab 10.1, but none on replacing the screen. I don't want to just assume that the process is the same.
My biggest concern is for the digitizer itself. These guides mostly recommend using a heat gun to loosen the glue between the digitizer and the LCD screen. My question is whether or not the heat from the heat gun is a threat to the function of the digitizer?
TLDR: Is it safe to use a heat gun on a working digitizer to replace a broken LCD screen?
Please pardon this bump (6 days later).
You broke the LCD behind the digitizer, but the digitizer is still fine ??
most of time, people will break the digitizer (which is in front)
I already did the digitizer repair (in this thread http://forum.xda-developers.com/showthread.php?t=1385958 )
to separate the digitizer from the LCD, you may need a heat gun but you can do it without, you just need to get a good knife and do it very slowly. for the next part I can't help you...
Matrix_19 said:
You broke the LCD behind the digitizer, but the digitizer is still fine ??
most of time, people will break the digitizer (which is in front)
I already did the digitizer repair (in this thread /showthread.php?t=1385958 )
Click to expand...
Click to collapse
Yup! I fell asleep on the couch with the tab on my lap, I went to get up in the morning, started getting up, put my foot down and it was leaning at an angle on the floor and against the couch. I felt it there and once I realized what it was I took the weight off... just damaged the corner of the lcd screen, but the digitizer is perfectly fine, not cracked and fully responsive even where the liquid bleeds in the corner of the screen.
to separate the digitizer from the LCD, you may need a heat gun but you can do it without, you just need to get a good knife and do it very slowly. for the next part I can't help you...
Click to expand...
Click to collapse
I hope somebody here might have the experience or even knowledge of whether the digitizer can withstand the heat from a heat gun without harm; I'd prefer not to go the knife route if I can avoid it.
Well I didn't get any answers here, so I bit the bullet and went ahead and did the LCD screen replacement.
It went fine, my Galaxy Tab 10.1 is now perfectly functional again.
A: When used to gently heat the housing side of the display assembly, the heat gun did not damage the digitizer.
If I could re-do it I would keep the following in mind:
- Peel off the green antistatic tape from the flex cables entirely because they are very sticky and difficult to pull off of the end of the flex cable when it's detached from its connector.
- Use proper tools; while guitar picks were helpful, I had to use bathroom tweezers for some bits and that could have been a disaster.
- While working the glue, be more careful not to get any glue on the inside face of the digitizer. It won't come off easily, and I didn't want to risk working it or using any type of solution.
diggerb said:
Well no answers here, so I bit the bullet and went ahead and did the LCD screen replacement.
Click to expand...
Click to collapse
So, when do we get the walkthrough with pictures?
Glad the repair was successful!
markp99 said:
So, when do we get the walkthrough with pictures?
Glad the repair was successful!
Click to expand...
Click to collapse
Sorry, I didn't take any photos. Besides it was a bit of a kludge job, I was very careless with certain parts of the process, and wound up with an extra screw I couldn't find a hole for. I definitely wouldn't recommend my work to anybody else.
There are a couple of videos from YouTube that were immensely helpful:
http://www.youtube.com/watch?v=ogVhYYakE6A (this is for a broken digitizer replacement, not quite the same)
http://www.youtube.com/watch?v=thTt6G27NV8 (basic full disassemble)
Good job!
Sent from my SGH-T999V using xda app-developers app
Quick question and i'm sorry if it has been asked before.
My stepdad cracked the screen but the digitizer and the LCD are fine.
My question is, can I replace the glass screen by its-self (as i've seen for sale for $7.00), or is the digitizer and LCD glued to the screen when I take it apart similar to the iPhones.
I'd rather not have to purchase a digitizer and a LCD if i don't have to.
Thanks in advance for the help :good:
Its one unit so you need to buy that for about $185. Its only possible to successfully separate the glass from the digitizer and the capacitive buttons with a machine.
Used notes are priced at about the same as the replacement screen unit.
Worth a try
http://www.youtube.com/watch?v=KV-80zTAfyc
Not really. The hairdryer heats up and damages the lcd while doing a marginal job of softening the adhesive. You will likely overheat the lcd. The buttons are deeply imbedded in the adhesive and are harder to place on the new glass. The adhesive sticker is pretty difficult to place correctly. I have excellent skills, and have replaced many screens (gorilla glass is a poor name choice) and I attempted this but it didn't go so good.
Agoattamer said:
Worth a try
http://www.youtube.com/watch?v=KV-80zTAfyc
Click to expand...
Click to collapse
wow, that's intense!! maybe if it was my phone, i'd try. thanks for the video, but i'm going to tell him to buy a new phone. haha, way too much work for me!