cm-10.1.3-quincyatt will NOT charge - AT&T Samsung Galaxy Note I717

I have never had this issue before so i'm coming for some help as i'm guessing it's something to do with CM. Last night i flashed cm-10.1.3-quincyatt with no problems at all. Everything was working flawlessly. Once i got my phone fully charged and most of my apps setup ect. I did a battery calibration, then used a drainer app to drain the battery completely as normal. plugged the charger back in and it charged to about 75-80% i picked my phone up a bit later to check messages and noticed it was not charging. I unplugged and replugged the charger cord with no success in getting the phone to charge. I've tried numerous cords, usb cables ect. Nothing will charge. It won't even recognize the phone when plugged in usb on the computer. the battery charges fine with an external charger, but obviously i cannot use the phone while the battery is out on an external charging unit. I know someone is probably going to suggest the charging port went bad...i highly doubt that because it was just replaced not a week ago. also, any time i've had a charging port go out, nothing will work in the port, not even a dongle jig. I powered the phone down and inserted my dongle jig to test and make sure, and sure enough, the second the dongle jig is inserted the phone powers on and boots into download mode as it should. I've reset dalvik ect. tried everything i can think of besides wiping and reflashing, as i'm trying to avoid that since i have about 4 hours or so in setting up custom settings/apps ect. on the phone lol. I've noticed browsing the web i'm not the only person experiencing this issue, so can someone please help me in fixing it asap? Thanks in advance for the help, and if a thread was already posted on how to fix this, please direct me to it, because i could not find it.
[Update]
I have wiped and reflashed just to test and see if that would fix the issue, sadly it still will NOT charge.

Related

S2 (international) hard bricked itself overnight

Hello there,
yesterday i got my phone back as it should get repaired (which it wasnt as it was not a warranty case) and so i rooted it and reinstalled cm10. all went fine and everything worked as it should.
installed a few apps and sync was all good. no force close or errors in general. During the night I kept it connected to my notebook (in standby) so it gets charged.
Bad surprise: I woke up and it didn't react at all. Black screen. nothing happens when removing the battery putting it back in and plugging in the usb-cable. no touch lights or whatsoever. no recovery, no download mode. just nothing at all.
i do have a wobbly usb port on my phone but yesterday it charged just fine without any interruption. just data mode wont work perfectly (loses connection and connects again) actually it always charges fine. so i dont think it is because of the usb port.
so what shall i do? i didnt use the phone overnight, it wasnt connected in wifi. just idling and now it isnt responding anymore...
hope that somebody can help
cheers
lolmensch said:
Hello there,
yesterday i got my phone back as it should get repaired (which it wasnt as it was not a warranty case) and so i rooted it and reinstalled cm10. all went fine and everything worked as it should.
installed a few apps and sync was all good. no force close or errors in general. During the night I kept it connected to my notebook (in standby) so it gets charged.
Bad surprise: I woke up and it didn't react at all. Black screen. nothing happens when removing the battery putting it back in and plugging in the usb-cable. no touch lights or whatsoever. no recovery, no download mode. just nothing at all.
i do have a wobbly usb port on my phone but yesterday it charged just fine without any interruption. just data mode wont work perfectly (loses connection and connects again) actually it always charges fine. so i dont think it is because of the usb port.
so what shall i do? i didnt use the phone overnight, it wasnt connected in wifi. just idling and now it isnt responding anymore...
hope that somebody can help
cheers
Click to expand...
Click to collapse
Does anything happen when you charge it with the normal wall charger?
Any way to try with another battery... just to see if the phone is really bricked or maybe there is no juice left in the battery...
also clean out your USB port with a toothbrush.. I had a similar issue with USB connection.. cleaning it out resolved that...
s_vohra said:
Does anything happen when you charge it with the normal wall charger?
Any way to try with another battery... just to see if the phone is really bricked or maybe there is no juice left in the battery...
also clean out your USB port with a toothbrush.. I had a similar issue with USB connection.. cleaning it out resolved that...
Click to expand...
Click to collapse
thank you for your tips.
nothing happens with the normal wall charger. trying another battery will be possible tonight and i will report back.
did the cleaning. didnt change anything with not charging but maybe if the phone will boot with the other battery it might have helped ^^
i read the other bricked thread and that was quite disapointing. still have warranty on it so maybe i'll send it directly to samsung rather than amazon.
thanks anyway for your help.
just might be interesting for cm10 users. I mean I did absolutely nothing with it. or maybe it was nand failure. idk

[Q] Strange problems and wont turn on without being plugged

Hello,
I got my Vibrant for a year now and its been woking great.
I rooted it and got HoneyBee rom, android 2.2.1.
A few days ago it started behave strange.
Sometimes when I plug it to charger(original) it wont charge and when I disconnect it, it shows the charging icon.
I read that it might be the micro usb port so I cleaned it up..and it sort of half fixed the problems, now it charges but sometimes it just crashes.
When I need to turn my phone on I cannot without having to connected to a charger or a pc usb cable.
Tried opening the phone and cleaning from the inside, rerooted, tried deiffrent rom, factory reset, nothing really worked.
Now the phone is working but its so unstable and I am not really sure of what to do next..
Any help?
Thanks
Hope this helps!
I would try flashing back to orginal stock ROM first. If its an issue with the software then that will work. If still having issues then try changing out battery and see if that helps. Hopefully its that easy and good luck
Thanks for the reply.
Already tried original stock rom, didn't help.
I think its the micro usb port because sometimes I just stick a woden pin inside it when it doesnt work properly and then suddenly it srats to work for a while..
I am really out of ideas, not warranty left so I cant just send it to the dealer..any ideas?
Have you tried wiggling the cable on the port side until it does something? Also have you tried a different cable. If you have it's definitely a port problem
Running Pa#*ion 13.1 RC and Lovin' It
Yes, I tried a few cables, it does charges now.
The problem is that sometimes the phone turns itself off if it gets any little shock, any little hit..
Tried checking the battery if its loose maybe, everythnig seems fine I even tried putting a piece of paper between the battery and the closing for a better sealing..nothing seems to work.
Some updates:
The phone charges without any problems, the icon of the charging is not stuck anymore after I disconnect it from the charger.
The only problem that the phone turns off at any small shock or movement..
Now, another phone at my work from another person is having the same problems and the only thing we have in common is that we charged with the same charger.
I think it was wet or something and just did some damage to my phone and to his phone.
What can I do? I already opened my phone and cleaned with toothbrush and 95% alchool, everything is clean, dry and stable.
Can it be the battery? I mean, what are those damn turn offs I'm getting..battery? usb port? any idea? I am out of warranty..

Battery weird - seems to be phone but no obvious hardware issue

I have a galaxy s2 and bought a new battery recently (samsung one) thinking it would solve an issue which I thought was my battery.
Its very hard to describe but will do my best (have checked other threads but nothing quite like this..):
The battery will always say charging when plugged in but will sometimes increase in charge and other times not. I can charge overnight sometimes and it will say charging 7% and in the morning be completely dead and will not even show the charging animation (I have fixed by using my girlfreinds phone to charge it a bit and then it will be fine for a bit).
I thought might be charger - but my girlfreinds s2 charges fine on it - her phone works fine on both batteries and charges both fine.
Seems to be something to do with my hardware and I thought it may be the charging port - but not sure as it does still say charging without having to wiggle or anything like that so that suggests not the port.
The other thing that suggests something other than the port is I have had a battery in my girlfriends phone with it on, then plug it in and it said charging 37%, take it out and put in my phone with it plugged in and turn the phone on and it will say charging 4%...
Does anyone have any ideas as to this? Any things to try?
Thanks heaps in advance!
Do a clean install of stock & test for a day or two, if you're already running stock skip straight to replacing the USB board/port. Given you've already replaced your battery, this is likely to be the cause of the issue. Search for KeithRoss39's guide in the General section; it's quick/easy/cheap (<AUD$10 for me) to do.

[Q] Note II Won't Charge

My GN2 just randomly started an issue with charging. Sometimes it will charge for about 10 minutes then it will stop. Other times it won't even recognize that I have plugged it in. Other times I will plug it in, the charging LED light will turn on, but the phone won't actually state that it is charging and won't charge regardless. It will not charge while it is turned off either. I have tried 4 different cables and blocks, tried using my computer to charge it but it doesn't recognize it anymore either. I have wiggled it into different positions, cleaned out the port, wiped cache and dalvik, flashed my ROM again, ect. The problem still persists. Do you think it is a faulty/damaged charging port? I have purchased a new one and a going to replace it when it arrives in about a week. Any other ideas in the meantime as to what it might be and how to solve it? Any help would be greatly appreciated. Thanks!

[Q] Weird Charging Issue

Hello,
I have Galaxy S2 and having some charging issue. Yesterday, when I plugged it in the wall charger, it didn't get charged (i.e. even the flash on battery was not coming up) and when I tried to restart the phone, it powered off but didn't switch on. I tried holding the power button to turn it on but it didn't. So, I pulled out the battery and left the cell for some time like 20 mins or so. After re-inserting the battery, it turned on but still was not getting charged. I tried to change the USB cable as well but nothing helped. I then tried to charge it via my Laptop it actually started the charging process but with error on Laptop saying "USB Device not recognized".
Today, I tried the wall charger again and here's I found something: when my phone is ON and I plug it in the wall charger it doesn't charge but as soon as I turn the phone OFF, my phone starts getting charged (Battery image comes on screen which usually comes when the phone is off). So, that's how I am charging my phone.
I went to the repair shop today, he said it's a charging port issue on which I have some doubts that why it is even charging in this way if it's a port issue. I just want to make sure if whatever he's saying can be somewhat true.
Can you please help me out? I would be really thankful to you.
I look forward to hearing from you soon!
Thank you!
PS: I tried to search about the port issues but I couldn't find anyone having this kind of issue so please!
The issues you have mentioned really do all point to a faulty USB board......it is common (with a faulty board) for some functionality to work while other functionality is lost. The part itself costs pocket change and is reasonably easy to DIY replace......
If you want to go down that path, check my profile for threads I've started.....you'll find a guide explaining exactly how to do it.
Just make sure to read and note the section on 'rev versions' it is VERY important to get the correct one......
My wife says I'm a phone geek....She's probably right

Categories

Resources