yesterday I decided to install cm 11 on my i9300 not with odin but from their site where you can download an exe then connect the phone to the computer then the magic begins (PS: i don't understand anything about flashing rome this is my first attempt so i need a simple solution i can work with )
while cm was installing on my phone something called clockwork recovery mode appeared so I foolishly pressed reboot system after that the mobile rebooted and got stuck in the boot loop
someone help me please!
I tried to follow some tutorials so I downloaded odin 3.04 but the phone didn't get connected. :crying:
Sounds like you stopped it before it installed the rom.
Either flash back to stock or download cm m10 from here, put on your sd card and flash with recovery.
http://download.cyanogenmod.org/get/jenkins/83756/cm-11-20140916-SNAPSHOT-M10-i9300.zip
stuck in cynogen mode
Darke5tShad0w said:
Sounds like you stopped it before it installed the rom.
Either flash back to stock or download cm m10 from here, put on your sd card and flash with recovery.
http://download.cyanogenmod.org/get/jenkins/83756/cm-11-20140916-SNAPSHOT-M10-i9300.zip
Click to expand...
Click to collapse
dear after installing Samsung galaxy s3 i9300 ROM upon rebooting i am stuck in cyanogen mode please help me
Related
Hello. I am new to the forum. I have a rooted Samsung Infuse 4g. I am a bit of a noob so please bare with me. I began having problems with the phone after I did a factory reset. Everytime I boot the phone now it brings me to clockwork mod recovery . Everything is written in red. Iv tried to do a recovery from here and I tried installing the rom from the my sd card and have had no luck. I cannot get into download mode either. How can I get my Droid running again?
Thanks in advance
If you can get into fastboot mode, download the .img file of any custom recovery for your phone, then use Android Flash Recovery to flash it. This will replace your CWM with a working version, which you can then use to flash a new ROM.
Mid year I decided to root and flash Cm 11 onto my little s3 mini (gt-i8190) and everything went great. Recently I read on the Novafusion website that they recommend using TWRP instead of CWM, searched on Google and saw it was safe to flash over custom recoveries. I used Odin to flash over the TWRP I downloaded from the Novafusion site. When odin completed its process my phone rebooted into TWRP and it all seemed fine, then I proceeded to flash the latest version of the Cm 11 4.4.4 rom. Again everything went great and my phone booted up normally.
I got the zip file for the Android L keyboard and I used Rom manager to reboot into recovery and showed the "Samsung Galaxy sIII mini gt-i8190 screen and just went black for 10 seconds, rebooted and continued going black then rebooting. I pulled the battery out and booted up my phone again then used rom manager to flash CWM again and it worked! I used CWM to flash the keyboard apk and it worked.
I was a little bit worried about the recovery bootloop and decided to make a nandroid backup. I couldnt reboot into recovery, manual way or with Rom manager.
I have used odin to flash CWM and TWRP a few times now without any luck. My phone just reboots normally when odin finishes.
If anyone could shed some light on this issue I would be grateful.
Thank you.
Hello everyone,
I had CM11 installed on my Samsung galaxy S3 I9300. But I wanted to trade my phone with my dads and he wanted the simple stock rom (Android 4.3). I tried flashing the stock rom on it which went good until the last step when it should reboot itself. But i'm stuck at the samsung logo, I tried everything (pulling out battery, rebooting it, install stock rom again,...).
And I even can't get in recovery mode. The only possible mode in can get in is download mode. What can the problem be? Have I done something wrong? Should I try to install another stock rom from another country? Is there another way to get in recovery mode? I am from Belgium and I can't find the "Belgian stock rom", so I tried installing it from the Netherlands, is that the problem?
Thanks already.
What is the filename of the stock ROM you flashed and which options did you select in Odin?
hamzah.bhatti34 said:
Hello everyone,
I had CM11 installed on my Samsung galaxy S3 I9300. But I wanted to trade my phone with my dads and he wanted the simple stock rom (Android 4.3). I tried flashing the stock rom on it which went good until the last step when it should reboot itself. But i'm stuck at the samsung logo, I tried everything (pulling out battery, rebooting it, install stock rom again,...).
And I even can't get in recovery mode. The only possible mode in can get in is download mode. What can the problem be? Have I done something wrong? Should I try to install another stock rom from another country? Is there another way to get in recovery mode? I am from Belgium and I can't find the "Belgian stock rom", so I tried installing it from the Netherlands, is that the problem?
Thanks already.
Click to expand...
Click to collapse
First thing you should always do after flashing stock rom or any rom that causes a boot loop is to boot into recovery and factory reset then wipe cache this solves 90% of bootloops. Now I know you said you can't get into recovery so try flashing a custom recovery with odin then try booting into that and then factory reset.
Like a dumbass i was rooting and updating my moms tablet i did root it i was seeing su and evrything but it had honeycomb i thing so i went online to put the best cyanogenmod for the tablet. Went i was installing with twrp i didnt save anything :good:
i installed the cyanogen rom but it didnt start up the only thing that showed up is the samsung logo.
Since then i was not able to acces to any android os. I keep installing new roms with odin or with adb push (no sd card slot) but they dont work. When is a custom rom i just see the samsung logo. When i install a stock rom i just see a black screen.
PLEASE HELP ME!
moyakong said:
Like a dumbass i was rooting and updating my moms tablet i did root it i was seeing su and evrything but it had honeycomb i thing so i went online to put the best cyanogenmod for the tablet. Went i was installing with twrp i didnt save anything :good:
i installed the cyanogen rom but it didnt start up the only thing that showed up is the samsung logo.
Since then i was not able to acces to any android os. I keep installing new roms with odin or with adb push (no sd card slot) but they dont work. When is a custom rom i just see the samsung logo. When i install a stock rom i just see a black screen.
PLEASE HELP ME!
Click to expand...
Click to collapse
If you still have download mode than there is nothing easier than flashing the stock rom with Odin. The stock rom can be found at www.sammobile.com
I did that like 10 times still the same result. Black screen or samsun logo.
moyakong said:
I did that like 10 times still the same result. Black screen or samsun logo.
Click to expand...
Click to collapse
What version of Odin did you use. And did you run Odin as administrator on your computer? I used Odin 1.85. Also, it can take a while to boot up the first time. If it still hangs after you successfully flashed it with Odin try a factory reset.
Hello everyone,
I own a samsung galaxy s2 gt-i9100 I've been using it for a long time. A few days ago i installed cynogenmod 13 marshmallow on it but faced some severe issues like dialler problems,battery drain,google play services not working. So, i switched it back to my previous rom i.e. cm 12.1 lollipop but my old twrp recovery got replaced by cynogenmod default recovery. Now some people who may have used it know that its very basic and does not has backup,restore, has bugs,does not flashes some zips or files that i wanted so i tried to replace it with twrp/cwm through rashr,flashify,rom manager,etc. But none of it worked, whenever I'd boot after flashing the twrp/cwm recovery it'll go back to the default cynogenmod recovery. Now, me not knowing what im doing stupidly downloaded mobile odin lite app then i downloaded the cwm kernel recovery kitkat compatible and installed via mobile odin lite. After that it got screwed, it won't just startup it'll just start and go into recovery i mean continuously! It was annoying, then i read an article on a forum to download any cm nightly or stable mod and flash it but i did a little bit of tweak of removing the recovery boot img file with twrp to get preinstalled twrp recovery but i gotta admit it was the last mistake possible. Now i sit here, with a bricked phone in my hand which is looping continuously only on the samsung logo. If anyone out there can assist me correctly it'll be a life saver for me. Thanks for reading this and please reply with a solution asap. Please! Im in danger!
can you get into download mode?
if yes you can download a stock firmware and flash but you will have to hope it will work, otherwise you will get stuck on nand write start which means the nand is stuffed/corrupted and then basically only a motherboard replacement will do the job, or you can try using another computer, reinstall usb drivers..
can you get into recovery mode?
if you can, you can flash a rom
The 'nand stuffed' assumption is a last resort, tried everything and nothing works assumption. There is *plenty* to try before assuming that the nand is 'stuffed'......
It sounds like (from your description) that you may have rendered recovery useless and inaccessible.
I've a feeling what you need to do is to go into download mode and Odin flash a firmware.
Even if it doesn't boot, you should have a recovery that you can flash PhilZ recovery from and then use that to flash a custom rom. Initially, I'd stay away from the MM builds and instead flash something KK or LP based as they're less 'volatile' and have a higher degree of stability than the MM roms.
http://i.imgur.com/rVnFwJM.jpg