yesterday my son went back from school with a fissure on top right and the screen remains black.the glass is untouched...
When I connect to pc I can hear a sound and in explorer I see sdcard and memory
I flash with odin 4.2 stock but still same.
so the screen is broken, I see the price for changing screen, it's prohitive. Someone knows a shop who can send at lower price a screen
thank's
I think that there maybe was too much pressure on the screen. Does it remains completely black or can you see backlight? If you still see backlight then the screen could be half defect or the cable could be a bit loose.
I dont know a shop for lowprice screen replacement, sorry.
at beginning it was very tiny enlightened on the left side and now no more...only the two down buttons who got light
no more backlight. I hear the sound when I press the buttons...
If it's more than 60 euros to repair, it's not interesting to do it
buy a used s2!
sent from Hell with my GT I8190
Related
Good Day folks, here is the long and short of it.
Galaxy s 2 fell and the screen broke
I bought a new screen
Replaced the screen BUT two big problems occured.
1. The screen appears to have less colours than my original screen
2. NONE OF THE SOFT KEYS WORK, HOME, MENU AND BACK DO NOT WORK.
Number 2. is the big problem. Does anyone have any idea how these buttons work?
Even when I press the buttons directly with my fingers with the buttons off they still do not work.
Im baffled. Please help.
I also have attached pictures of the button area
It happened to me, I removed the screen, I replaced from beginning and it worked...
Hi Collado, do the white things behind the buttons have any electronic functionality or are those just things to make it stick?
To all future readers. I found out what the problem was. Basically,
The home, back and menu keys are all connected to a single ribbon. It appears there is a tiny piece, connected via the back key. That was torn while i was ripping off the the screen and digitizer.
See the picture attached
How much did you pay for your replacement screen and where did you get it. My digitizer is broken due to a drop. My front glass is perfect but the digitizer is completey shot. How difficult was this project?
Hi Johnboy
I cant remember the price of the digitizer offhand but make a check on ebay.. that is where i got it.
Difficulty is high as you need the minature tool set to do this effectively and a gentle touch.
However, it still appears as though the screen I bought has less colours.
Sorry to jump in and unintended hijack
I also dropped my S2 and cracked the screen, and after checking around dropped it in to the Geek Squad at CPW. Who duly replaced the screen and digitizer for £80. Only problem is the screen seems less bright and if moved off the central viewing angle the screen dims, as if it wasa standard lcd and not the orginal AMOLED screen. Does anyone know if they make lesser screens or was it fitted badly.
Any advice greatly appreciated.
DM.
I would go back with it and complain.If you dont get satisfaction then do an impression of the guy that goes into the pizza shop in "rise of the foot-soldier" film.
Sent from my GT-I9100 using xda premium
Hi all,
Today I dropped my S3...on my bedroom carpet and although there are visibly no cracks or scatches on the surface of the screen when I went to unlock it the touch screen wouldn't work and there is a small black area in the top right hand corner. Just now I tried to see if it would work but found that the colour of my screen has turned to a blue hue
All the buttons are still working fine
The phone is still under warranty so would going the samsung service centre be worth a try?
or would I have to get the screen replaced or something, what are my options?
Any estimates on approx costs too are appreciated!
Thanks
Photos if that helps...sorry for bad lighting x-x
i1190.photobucket.com/albums/z455/jellyblobofdoom/SAM_1145_zps69258556.jpg
i1190.photobucket.com/albums/z455/jellyblobofdoom/SAM_1144_zps301595cb.jpg
The screen will need to be replaced, take it to samsung. it won't be covered by warranty though
Hi there,
my girlfriend smashed her Galaxy S3 sometimes. Now it's done, the glass is broken in the upper left corner. The screen worked fine. A few days later she dropped it and dropped it again... i think she needs some wooden sticks to make a bushfire to call her friends. After some drops the screen stopped working fine. The screen turns black and if i push the upper left side a bit, the screen apears... very purple. I watched some tutorials about replacing the glass'. So i opend the galaxy s3 checked the ribboncables and after reasembling the screen won't start anymore. The softkeys doesn't apears. The phone is booting and make sounds. That means, power is there but no power for the display. I only want to now if the display is okay or not, to buy a new glass. But now i have these power problem. Somebody know how i can fix it? Or do i need a new display with digitizer? It's not cheap... a glass is much ceaper .
Zebra1234 said:
Hi there,
my girlfriend smashed her Galaxy S3 sometimes. Now it's done, the glass is broken in the upper left corner. The screen worked fine. A few days later she dropped it and dropped it again... i think she needs some wooden sticks to make a bushfire to call her friends. After some drops the screen stopped working fine. The screen turns black and if i push the upper left side a bit, the screen apears... very purple. I watched some tutorials about replacing the glass'. So i opend the galaxy s3 checked the ribboncables and after reasembling the screen won't start anymore. The softkeys doesn't apears. The phone is booting and make sounds. That means, power is there but no power for the display. I only want to now if the display is okay or not, to buy a new glass. But now i have these power problem. Somebody know how i can fix it? Or do i need a new display with digitizer? It's not cheap... a glass is much ceaper .
Click to expand...
Click to collapse
Multiple posts on the subject including a you tube video on replacing .You need to search them and decide .
Accessories may have more information .
jje
Not sure how that happened...
Thanks in advance for looking.
Ordered a screen replacement for my wife's busted S3 screen. Got it, followed directions....got the area around the headphone jack a little too warm, but continued and finished removing the screen. Once I had the screen off, I thought it would be a good idea to power it up to make sure everything was working, especially the top left corner of the screen that was closest to the over heated spot.
To my skeptical surprise everything was cool. Took a picture, looked at some higher res pictures....just to make sure everything seemed normal, to which it did. Powered down, removed the battery and the SIM card and continued on.
I cleaned the screen with alcohol as the directions stated, put everything back together..and NOTHING. The thing is bricked. Any ideas how? I wasn't doing anything remotely related/close to the ROM. The only difficulty I had with any part of this (aside from the aforementioned over heating) was with the two ribbon buttons at the bottom, which got slightly tangled in the tape.
Before I attempt to 'unbrick' this does anyone have any other ideas? Battery is good, phone has been plugged/unplugged while attempting to power up....I didn't take anything else apart so I can't think of anything else that would have goofed up this phone.
If your LCD was broken a new bit of glass wouldn't fix it. It's almost impossible to change just the glass without damaging the digitizer. Most alcohol will destroy an LCD so cleaning it with that is a terrible idea. If you plug your phone into a computer see if it connects, that will at least tell you that the phone is still working, just broken display.
DrFredPhD said:
If your LCD was broken a new bit of glass wouldn't fix it. It's almost impossible to change just the glass without damaging the digitizer. Most alcohol will destroy an LCD so cleaning it with that is a terrible idea. If you plug your phone into a computer see if it connects, that will at least tell you that the phone is still working, just broken display.
Click to expand...
Click to collapse
Awesome. Per the instructions: "clean screen with Isopropyl alcohol to remove any excess glue"
Plugged in or otherwise, I get no LEDs, vibrations....nothing. Wondering if a jtag would even be worth it?
I helped a friend repair the glass on a Galaxy S3 (GT-i9300) and after getting it all put back together, the screen looks gray when it's powered off. It's hard to explain, but I've uploaded a video of it in action for you to see:
http://youtu.be/dy3qAD_YzXE
When the phone is turned off, the screen is black like it should be. But when the phone is powered on, and you turn the screen off with the side button, it looks gray and like it's still turned on. We used a heat gun to pull the cracked glass away from the lcd, and used a infrared thermometer to make sure we didn't get it too hot. Just looking for some ideas of what could be causing this. I'm hoping it will work itself out, but I have my doubts. Any thoughts on the matter are appreciated.
*edit*
I wasn't there when the screen cracked from being dropped, so I'm not sure if the phone was doing this after the drop, or just after we replaced the glass. I'll update as I find out more about its condition before being brought to me. The battery was dead when it got to me, and I didn't think to check the phone's functionality before starting the repair. I was under the impression everything still worked and just had a spider webbed screen from a drop.
Try factory reset and flash a 4.1.2 stock rom, but sounds like a damaged display.
So my girlfriend dropped her s3 the other night , the screen stays off ( does not light up ) but the touch sensors still work, we can answer calls on it by knowing the approximate location of the answer button, any thoughts on what the issue is ? I would prefer to repair this at home rather than make her pay money through a shop, thanks in advance
Darknod66 said:
So my girlfriend dropped her s3 the other night , the screen stays off ( does not light up ) but the touch sensors still work, we can answer calls on it by knowing the approximate location of the answer button, any thoughts on what the issue is ? I would prefer to repair this at home rather than make her pay money through a shop, thanks in advance
Click to expand...
Click to collapse
It is easy to replace broken GLASS.
but i think you will need to replace screen.
If you purchase assembly of glass, digitizer and screen it will be very easy to replace by yourself.
quaker1985 said:
It is easy to replace broken GLASS.
but i think you will need to replace screen.
If you purchase assembly of glass, digitizer and screen it will be very easy to replace by yourself.
Click to expand...
Click to collapse
The glass isnt broken, perfectly clean with no scratches cracks or nicks , it just wont light up;
i had the same problem once, had to be sent to samsung (or wherever) by the shop where i bought it
buying a display and metal frame (obviously you can't buy them seperatly) plus glass would have cost almost the same
i wanted to find out whether the screen still works and it's a problem with my motherboard or vice versa so i unscrewed all bolts to access where the screen is plugged in on the motherboard but i didn't have another s3 to do the same and check it :silly:
still don't know how amoled displays work so it might be possible that whatever's responsible for backlighting the display broke
w0rinal said:
i had the same problem once, had to be sent to samsung (or wherever) by the shop where i bought it
buying a display and metal frame (obviously you can't buy them seperatly) plus glass would have cost almost the same
i wanted to find out whether the screen still works and it's a problem with my motherboard or vice versa so i unscrewed all bolts to access where the screen is plugged in on the motherboard but i didn't have another s3 to do the same and check it :silly:
still don't know how amoled displays work so it might be possible that whatever's responsible for backlighting the display broke
Click to expand...
Click to collapse
My thought was that the backlight broke or maybe the entire display system is disconnected , I might just have to take it apart for an exploratory operation,
before it went completely black there was a purple stain which grew until two thirds of my display were purple, the lower part where it started was black.
then i managed to open this samsung hardware debugging menu where you can check for dead pixels by letting your display light up in red, green and blue. there i found out that only blue and green pixels very working correctly in the upper third. the next day every purple pixel was dead.
so 2 months after this little stain appeared my whole display was in the same state as your girlfriend's seem to be now.
so i don't think this plug (it sits in place pretty tight) got loose and that's why it doesn't work anymore.
and my sister had exactly your problem. she dropped her s2 and it immediately went black
she hat to sent it in as well ...
good luck
if you find out what's the problem and want to share it, i am curious about it as well
If possible, check for loose connectors first.
I don't know about replacing the screen. The sheer amount of LOCA makes it a messy job.
Probably the display is dead. You'd need to replace the screen+glass.
There is no back light on an oled screen.
Sent from my GT-I9300 using Tapatalk