Hi people, anyone know how to root leagoo lead 2? This phone uses MTK6582 chipset, rom version is 4.4.2. I tryed root with root genius but it failed, it said that my phone is too tough to root (sorry bad english)
good question
im also looking to root my lead 2 usual tools dont seem to do the trick
Rooting is actually the first and easiest step to begin your journey on android developing, if you can't root, you won't succeed in android development. Don't worry, I will help you with root.
To root your device, I highly recommend Kongo android root(PC), it not only covers a really great amount of device, but is also able to unroot your device, all it takes is just a click after you plugged your device into the PC. Or if you don't want to use the PC, you can install an app that will help. It is called vroot, it is Chinese, so it might be a little hard for you to understand.
Kongo is not working. Stucks at waiting for device. waited about 1 hour and still stucked.
Re
Hi, try KingRoot works for me its chinese app.you can download from website kingroot.net place apk file on your Phone and install then you can root your device very easy
Thanks for the help. APK worked very well .
Is it safe to use this chinese root app
Chrome was warning about a "Possible Dangerous Download File", but I still downloaded it and scanned for viruses.
This is the APK virus scan report : apkscan (dot) nviso (dot) be/report/show/c4340bc2d1322e514e025430dc9c5d7c
I'm not an expert but i recon the antivirus picked it up only because there is lots of low level scripts that root your device i guess (cmdline files?)... and the hard-coded URL's listed in the scan point to few sites: Android.com , QQ.com, kingroot.net, ibutian.com, and non of them seem to be a malware websites.
Anyway let me know if it's all-right to use this APK and root my Leagoo Lead 2
You can use that apk. its safe and worked for me very well.
Tested now with kingroot but unable to root it.
Seems that last OTA update is the problem
Any other suggestion?
EASY DONE
Kingo root - DOESNT WORK forget it!
VROOT dont work - Forget it.
Sat back and had a think and BOOM
went to leagoo website downloaded the new V10 rom listed there.
Unzipped file, Flashed rom to phone first, only cause i wanted to update new device.
After flashing, UNPLUGGED PHONE used MTKDroid tools to flash cmw, (open droidtools, DONT PLUG PHONE IN) and go to root/backup/recovery and choose boot file, it asks to "create cmw automatically" say yes, VIOLA droidtools makes the recovery.
Then used SPFLASHTOOLS to flash cmw recovery - works great.
As i have been playing with MIUI and an Elephone P2000 had the file - UPDATE-SuperSU-v2.02.zip
cant do links, so search in google "download UPDATE-SuperSU-v2.02.zip" and first link is the winner
booted into recovery, flashed it and have root, easy peasy
mingnon said:
Kingo root - DOESNT WORK forget it!
VROOT dont work - Forget it.
Sat back and had a think and BOOM
went to leagoo website downloaded the new V10 rom listed there.
Unzipped file, Flashed rom to phone first, only cause i wanted to update new device.
After flashing, UNPLUGGED PHONE used MTKDroid tools to flash cmw, (open droidtools, DONT PLUG PHONE IN) and go to root/backup/recovery and choose boot file, it asks to "create cmw automatically" say yes, VIOLA droidtools makes the recovery.
Then used SPFLASHTOOLS to flash cmw recovery - works great.
As i have been playing with MIUI and an Elephone P2000 had the file - UPDATE-SuperSU-v2.02.zip
cant do links, so search in google "download UPDATE-SuperSU-v2.02.zip" and first link is the winner
booted into recovery, flashed it and have root, easy peasy
Click to expand...
Click to collapse
Great!!! It works also for me
I found an additional tutorial with more detailed explanation for who, like me, is not so practical with flashing..
.theandroidhow.com/2014/05/how-to-make-flash-cwm-recovery-without.html
Has anyone testet just to apply update.zip usin update-supersu-vxxx.zip?
Related
Just bought PAP 5044. Fantastic phone. Anyone have any ideas for rooting this phone, installing cwm???
Use Framaroot 1.6 (Boromir exploit) for rooting. It's pretty much "one click" stuff and works like a charm. Now, as for cwm, I still haven't found the solution. I just managed to boot to the stock recovery but none of the commands are working so no use there.
arsenique said:
Use Framaroot 1.6 ...stock recovery ...
Click to expand...
Click to collapse
Yeah framaroot works awesome. Stock recovery works too. Commands are little funny. Entering everything ith volume up, volume down is for down
Finally got CWM working. The procedure of installing is fairly simple but I had to browse through few czech and russian forums to get the recovery.img.
This procedure doesn't need PC at all. Everything is done on your phone. Just follow these few simple steps.
1. First of all, you should be rooted. If not, use Framaroot to do that (fairly simple to do and pretty much "one click" stuff)
2. Next, install MobileUncle MTK Tools (available here )
3. Now, download the attached recovery.img and transfer it to the root of your SD card.
4. Open MobileUncle and grant root permission if asked.
5. Once it is open, choose "recovery update" on the main screen.
6. You should be able to see your recovery.img first on the list. Below are some other recovery images found online but DO NOT chose those.
7. When tapped your recovery.img it will ask "use recovery file: recovery.img (5620Kb)?" - tap Yes.
8. Within seconds, it is flashed and it will ask if you want to reboot to recovery... choose Yes.
9. That's it. You have fully functional CWM
Now, if you want to backup your device in CWM please note that the backup folder may grow pretty large if you are using SD Ext (which is pretty much a must with this device) so make sure that you have enough space on your SD card before you perform backup.
P.S. browsing through the czech and russian forums, I've found couple of pretty functional ROMs (there are few MIUI ports and one Xperia C port). I'm going to test those in the next couple of days and if it works, I'll share it here.
Cheers.
Disclaimer: I am NOT a developer! I am NOT responsible if you brick your device or if anything goes wrong!
Any new custom roms for this device? Cant find anything out there about custom roms for this phone...
Puritanicall said:
Any new custom roms for this device? Cant find anything out there about custom roms for this phone...
Click to expand...
Click to collapse
Okay so i found this xperia ported miui rom for Prestigio 5044 and it works great . I would send a link but it's my first post here and I can't post outside links, just search google for "COLLECTION OF MIUI PORTED ROMS FOR VARIOUS DEVICES" and the first one should be it.
Then scroll down until you see prestigio 5044 and download.
I would like to know if anyone has got some other roms for this device.
unusualphone said:
Okay so i found this xperia ported miui rom for Prestigio 5044 and it works great . I would send a link but it's my first post here and I can't post outside links, just search google for "COLLECTION OF MIUI PORTED ROMS FOR VARIOUS DEVICES" and the first one should be it.
Then scroll down until you see prestigio 5044 and download.
I would like to know if anyone has got some other roms for this device.
Click to expand...
Click to collapse
Dont wanna risk with flashin' roms for now. I installed xPosed framework and changed everything i could
any custom rom for prestigio 5044 great phine
Sent from my PAP5044DUO using xda app-developers app
Check thread about Lava Iris 504q development, its a same phone..
Prestigio 5044DUO Development
Prestigio 5044DUO Development ( many roms )
androidpro.info/main/androidinsertion/prestigio5044/
pizzonia said:
Check thread about Lava Iris 504q development, its a same phone..
Click to expand...
Click to collapse
Too bad we can't flash their roms.. Prestigio done something to the bootloader so we can't boot their kernel properly. Probably by flashing Lava's uboot, we could do it. Effort oz for otg support that prestigio disabled
Sent from my PAP5044DUO using Tapatalk
Dear
Can you help me find original recovery image for Prestigio 5044 DUO? I would like to go back to original ROM but I can’t because I have CWM recovery instaled.
THX, BR
lolerpro8 said:
Too bad we can't flash their roms.. Prestigio done something to the bootloader so we can't boot their kernel properly. Probably by flashing Lava's uboot, we could do it. Effort oz for otg support that prestigio disabled
Sent from my PAP5044DUO using Tapatalk
Click to expand...
Click to collapse
hi to all,
i just fuond this thread and i hope that someone can help me.. Pleasee!
My first post and it's already a mess.
I explain my situation shortly:
I download framaroot and installed the boromir expansion, by the way everything until i made a mess. I deliberately deleted the browser that is a core application. The result is that the phone is blocked. I didn't done anything else. Now my pc won't recognize the phone, or to be more specific is still recognized but only in recovery mode, and activating "install from adb". The pc recognizes it like an htc dream.. Thanks to adb, i've tried to install the firmware version, in hoping to come back to the stock version and undo, but the installlation is completed but the phone still not workin.
When i turn on the device it starts with boot animation logos and then SOME it's not working and the phone is blocked.
Can someone save me?
thanks to all for reading me, and losing your time. I made a mess.
villo88 said:
hi to all,
i just fuond this thread and i hope that someone can help me.. Pleasee!
My first post and it's already a mess.
I explain my situation shortly:
I download framaroot and installed the boromir expansion, by the way everything until i made a mess. I deliberately deleted the browser that is a core application. The result is that the phone is blocked. I didn't done anything else. Now my pc won't recognize the phone, or to be more specific is still recognized but only in recovery mode, and activating "install from adb". The pc recognizes it like an htc dream.. Thanks to adb, i've tried to install the firmware version, in hoping to come back to the stock version and undo, but the installlation is completed but the phone still not workin.
When i turn on the device it starts with boot animation logos and then SOME it's not working and the phone is blocked.
Can someone save me?
thanks to all for reading me, and losing your time. I made a mess.
Click to expand...
Click to collapse
Flash custom recovery trough spft then flash some modified rom
lolerpro8 said:
Flash custom recovery trough spft then flash some modified rom
Click to expand...
Click to collapse
where i can find custom recovery and custom firmware?
can u please suggest me somenthing?
I also found driver so that spft can recognize my phone, but i don't know which one is correct and working properly.
By experience, the driver is called "mtk usb vcom port" or "usb preloader 65xx"???
Then i don't know how to use spft, it's my first time, and custom rom don't know what to choose
villo88 said:
where i can find custom recovery and custom firmware?
can u please suggest me somenthing?
I also found driver so that spft can recognize my phone, but i don't know which one is correct and working properly.
By experience, the driver is called "mtk usb vcom port" or "usb preloader 65xx"???
Then i don't know how to use spft, it's my first time, and custom rom don't know what to choose
Click to expand...
Click to collapse
Everything you need can be found here http://androidpro.info/main/androidinsertion/prestigio5044/ . To get to meta mode you need to compliantly turn off your device and connect it to the computer( with battery still inside)
lolerpro8 said:
Everything you need can be found here . To get to meta mode you need to compliantly turn off your device and connect it to the computer( with battery still inside)
Click to expand...
Click to collapse
I tried different version without flashing them, only by installing the zip, and i would like to install the last prestigio version, or a clean version with just root..
Is it possibile?
By the way everything seems to work with these custom roms, but not the phone itself, i have the broadband and imei, but it doesn't recognize the sim cards, to be more specific the IMSI number.
villo88 said:
I tried different version without flashing them, only by installing the zip, and i would like to install the last prestigio version, or a clean version with just root..
Is it possibile?
By the way everything seems to work with these custom roms, but not the phone itself, i have the broadband and imei, but it doesn't recognize the sim cards, to be more specific the IMSI number.
Click to expand...
Click to collapse
All the stock versions from the site are down. You need to get some othernrom. I prefer either miui or coloros. As for the other thing, if it doesnt work after flash its hardware related
lolerpro8 said:
All the stock versions from the site are down. You need to get some othernrom. I prefer either miui or coloros. As for the other thing, if it doesnt work after flash its hardware related
Click to expand...
Click to collapse
Yep indeed, infact i put again imei and now it's working, but the only thing i don't know which value to set in at for second sim. It's always hard! To me is a factory problem.
I've installed the bean version instead. It's working, i love it but i don't know exactly how to install\update xposed framework and gravity box tools. When u install, it magically appears on ur sd card a folder called "xposed disabled". It's still not working.
I would like to change columns in UI system.
villo88 said:
Yep indeed, infact i put again imei and now it's working, but the only thing i don't know which value to set in at for second sim. It's always hard! To me is a factory problem.
I've installed the bean version instead. It's working, i love it but i don't know exactly how to install\update xposed framework and gravity box tools. When u install, it magically appears on ur sd card a folder called "xposed disabled". It's still not working.
I would like to change columns in UI system.
Click to expand...
Click to collapse
Dude i cant help you with everything search before posting.
Hello
We recentlly bought THL W100S.
The Phone is not rooted and the android installed suffers from some bugs that is see alerts is chines.
I want to root the device and install a normal ROM.
I tried "Framaroot" - only the third option worked for root, it installed supersu, but the phone doesn't have a root access and when I open the supersu it tells me that the software need to be upgraded and when I approve the upgrade fails.
I tried using Vroot - same.
I tried using the cynagonmod installer - It told me the device is not supported.
Is there any other way I can root my device?
I really don't like the original ROM\
Thanks,
Rotem
Hi
I know that it as passed a month but if you still need help try this:
You can try this method (use google translate if you don't know to read it):http://www.movilesdualsim.com/tema/root-recovery-thl-w100s.51860/ - I know of many people that have used this and it worked but not for me. So I searched for it and I found this: http://www.kingoapp.com/android-root.htm
I managed to make it work and root my THL W100s.
Beware of this:
- The program will recognise your as HTC (for me Dream but there as been reports of other models).
- You have to install the adb drivers: http://adbdriver.com/downloads/
- Downloading and navigating from the website was extremely slow for me. I believe it is normal.
- The phone will reboot my itself a couple of times. It is normal and don't touch the phone unless it prompts you something.
After the program does what's suppose to do, download SuperSU from chainfire (here on xda) to give SuperSU options and permissions.
Check if the root is done properly using an app like RootChecker
If you want to, you can also use the CWM custom recovery found in the first link. Install it after you root the phone.
Also you can use MTKDroidTools to root, backup and install a custom recovery. You can find all type of tutorials here: http://www.china-devices.com/
I hope I could help you.
Cheers
Hi, I'm trying to get my note rooted and I'm following this guide, but the link to the PDA.TAR file does not work.
Is there somewhere else that i can find a link to it?
DLXII said:
Hi, I'm trying to get my note rooted and I'm following this guide, but the link to the PDA.TAR file does not work.
Is there somewhere else that i can find a link to it?
Click to expand...
Click to collapse
I hope u had the issue resolved, but if in case you didn't you could always try this two steps (they've worked for me, so it's just a suggestion since it worked for me): the first time I rooted my phone I found a one-click root option, called kingo root (here's their website www.kingoapp.com) It's pretty self explanatory on their website but in a nutshell you just download the app online and it roots your phone. Another way (which I personally found very interesting and I found just by chance) was to flash a custom recovery (CWM or Philz, dunno about TWRP) and after cleaning cache/dalvik and/or wiping device chose to reboot. (Here is a thread from mooneyb with CWM Touch http://forum.xda-developers.com/showthread.php?t=2571424) Since you don't need root to flash a recovery since it's done through Odin, when you'll reboot you'll have an option that says that you may have lost root and if you want to fix it. My phone was unrooted at the time this option showed on my phone, and when I chose "yes" and my phone rebooted, SuperSU was working fine and so was Titanium Backup.
Maybe it'll work for you too, so hope this helps!
Hello!
First post here!
I just revived a Cubot Note S and am pretty happy with the performance.
I've searched around for a while and am unable to root the device, I've seen one other post on XDA regarding a successful Root on 5.1 but am unable to find any information on how this is achieved.
I've tried Kingo, King and Root Genius with USB Debugging an OEM Unlock enabled.
If someone could point me in the right direction, that would be great,
Thank you
Sorry, don't have any kind of solution but I just wanted to say I'm in the exact same boat as you. Been trying to root my Cubot for days.
Good News!
Aftee alot of digging and flashing several recoveries I have successfully rooted the Cubot Note S.
Ill put a simple guide here to help:
Its your responsibility what happens to your phone, Mine works flawlessly, but be careful out there!
Requirements:
Cubot note S on 5.1 Lollipop
Smart Phone Flash Tool & MTK Scatter file (for the cubot) & Super SU.zip
buzztechnica.com/2016/03/how-to-root-and-install-twrp-recovery.html?m=
In the first paragraph is a download link. Download the rar and extract it. All you need is the Smart Phone Flash tool and the MT scatter.txt. THE RECOVERY IN THIS DOES NOT WORK!
Modified TWRP recovery (there is omly one that works!
android-hilfe.de/thema/root-und-twrp-fuer-cubot-note-s.753414/page-2 << Post number 37 has the Mega link to the working recovery.img file
MTK VCOM drivers
spflashtool.com
Look for link that says "Download MediaTek VCOM Drivers" get the self installer package.
About recoveries,
Make sure you use the Modified one and not any other. The bundled one in the FlashTool and the other 3 floating in the internet do not work as they do not register touches. These are useless.
Okay, so now you have the files i would create a new folder with everything you need. So thats the Flash tool, scatter file and the modified TWRP recovery and phone drivers.
Before you start. Copy the SuperSU zip to your phone somewhere. Also enable USB Debugging in the developer options. Finally TURN OFF YOUR PHONE. i.e hold power, power off. Dont plug your phone into the computer yet
On your computer install the VCOM drivers first. Now to get the drivers installed I had to modify the batch file to work on Win10. If your on Win10. Right click the install batch file and edit. Remove all the lines regarding the OS check and save and run the installer. A command window will notify of the install success
open the Flash tool. Now, the second box asks you to select a scatter file. Select the one you have.
Ensure the dropdown box is selected to Dowload Only.
Ensure that ONLY recovery is ticked, you dont wanna flash anything else accidently!
To summarise... now, you should have super su.zip on your phone. Smart phone flash tool setup with the scatter file and custom recovery loaded. Your ready to flash!
Before plugging your phone in click Download. Now plug your phone in. And you will see it will flash. Should take a few seconds youll see a bar going along the screen. A box will pop up saying download OK!
Now, apparantly your phone is meant to boot without any assistance. Mine did not. So in this case. Unplug from PC. Remove phone battery. Put back in and tey to enter recovery (Pwr + Vol Up) <<< tip, dont hold them in too long as my phone just kept resetting. Hold about half a second while the screen is on then let go
You should now be in twrp recovery. Swipe the notification and proceed to flash the super su zip. Once complete, remove your battery and DONT press restart. It wont work and your phone will freeze.
Put your battery back in and boot normally, you now have custom recovery and Root!!
Enjoy!
Sorry about the links. Im new here. Modify the links and paste in browser
.... or you simply navigate to needrom.com and seek for "Cubot Note S". Then you'll find a working TWRP-recovery for Android 5.1 and even 6.0, a beta ROM for Marshmallow (6.0) and the not yet published ROM from 11-07/2016 for Lollipop (5.1). To flash with SP-Flash-Tool from your Computer.
Cheers!
frankonia said:
.... or you simply navigate to needrom.com and seek for "Cubot Note S". Then you'll find a working TWRP-recovery for Android 5.1 and even 6.0, a beta ROM for Marshmallow (6.0) and the not yet published ROM from 11-07/2016 for Lollipop (5.1). To flash with SP-Flash-Tool from your Computer.
Click to expand...
Click to collapse
I tried these, but as stated, all those Recorives did not work due to not recognising the touches. plus, the 5.1 stock ROM is stable, where as the 6.0 is still beta. I'd rather stick with a stable ROM.
6.0 ROM and the 6.0 TWRP may work, but its untested for me. hence why I've targeted 5.1 in my tut
Thanks for the detailed walk through Sparky. I may give it a go but I'm very new to all this so I don't want to get myself into something where I'm not really sure what I'm doing. Either way, thanks for the help
hiiiiYA said:
Thanks for the detailed walk through Sparky. I may give it a go but I'm very new to all this so I don't want to get myself into something where I'm not really sure what I'm doing. Either way, thanks for the help
Click to expand...
Click to collapse
No problem, Its actually quite straight forward once you've found the working files. At least now there is a tutorial on the internet for this phone which is complete and tested
moha u are awesome actually, how the hell did u find out that?
It took me days, i rooted with iroot - woorked, then it unrooted itself, did again, didnt work I Tried millions of different Recovery.img nothing.
Tried urs - works perfektly with 5.1. Does not with 6.0.
But thank u a lot <3 Edit 2: 6.0 works with the img of: http://www.needrom.com/download/cobot-note-s-6-0/
Hi, anyone with success on v.6 / Marshmallow ?
SparkyTheAlbino said:
Hello!
First post here!
I just revived a Cubot Note S and am pretty happy with the performance.
I've searched around for a while and am unable to root the device, I've seen one other post on XDA regarding a successful Root on 5.1 but am unable to find any information on how this is achieved.
I've tried Kingo, King and Root Genius with USB Debugging an OEM Unlock enabled.
If someone could point me in the right direction, that would be great,
Thank you
Click to expand...
Click to collapse
Kingroot works
Hello, there!
The precious thing is a cheap 7" allwinner a33 tablet. By apps its recognized as Astar y33.
It is a 16Gb Storage Tablet with 1 gb ram. I bought ist for 42€. :cyclops:
Unluckily i only can install apps on a 1 gb internal storage and the 16gb are only for media or movable apps. It should have 1gb ram but Aida64 said it has 512 installed.
I urgently need to give root to it, to make it work -and enjoyable. I allready tried out:
-Kingoroot (also via PC)
-Kingroot
-Iroot
-Towelroot
-SuperOneClick.exe
-and various desktop based one click rooters
and all failed.
I dont know what i can try next.
I have the ADB driver, but not a certain fastboot interface driver, which i could not find in the internet at all. I have a 64 system.
Many people with similar tablets could root them with Kingo root or Iroot, but it worked not for me and my tablet must be somehow different, it also did not had any bloat or malware on it.
Please, please, give me a hint what i could try next. :silly:
These are the specifications of the tablet:
*See attachements
Root method for recovery
Good afternoon!
To apply the patch-and for rooting you device, it is necessary to get into Recovery.
So try to load into recovery by this way: "Settings-> Recovery and reset-> Recovery Mode".
After rebooting, you see some menu where you should select drive(sd card) on which the pre-recorded file "Update.zip"
After finishing, restart your device use first point of menu.
Now you have a root, it is necessary to update the SuperSu by selecting "OK".
P.S.
I didn't test it but find it on some good forums. Send privet massage to me if you have some questions.
Root_patch
Good evening!
I tried it out right now.
It was flashable but the su binary wont let me update. How should i update the su binary? Do i need another flashable zip?
Unluckily the root checker says that root permission is not granted yet.
Update: I flashed a current Supersu update.zip with my stock recovery mode.
It says "installtion abortet".
I dunno. I ll have to use the tablet to cut vegetables. *joke
Wow, seems like suddenly root was granted.
Last thing was: I tried to root it with Iroot via PC.
It installed some adware on the tablet but the root checker still said no.
Then Kinguser detected some malware in the notification are. I fixed this and noticed that i also could remove system apps with Kinguser.
Then i retried apps that recommed root like rashr and to my surprise - root was granted suddenly!!!
:laugh:
Woah! Somehow im not so sure what rooted it now, because i already tried everything five times before already and it didnt work ^^
I think, it could be this:
Kingroot has shown me before, that my device is not supported. I could kinda request compatibility, which i did.
Maybe this magic happend unnoticed and suddenly it was rooted.
Oh ****.
Afterwards i flashed some recovery.img someone told me its for TWRP for the tablet.
Since then, its in a bootloop.
How to fix this? For now, i will just wait until the battery has run empty. (That fixed beeing stuck in fastboot mode before)
THANKS!!!
Nejix83 said:
Root method for recovery
Good afternoon!
To apply the patch-and for rooting you device, it is necessary to get into Recovery.
So try to load into recovery by this way: "Settings-> Recovery and reset-> Recovery Mode".
After rebooting, you see some menu where you should select drive(sd card) on which the pre-recorded file "Update.zip"
After finishing, restart your device use first point of menu.
Now you have a root, it is necessary to update the SuperSu by selecting "OK".
P.S.
I didn't test it but find it on some good forums. Send privet massage to me if you have some questions.
Root_patch
Click to expand...
Click to collapse
Hey dude, you are awesome! I could not find anywhere this file. At last my tablet is rooted. I have been looking for firmwares for these tablets everywhere and, as they are really old and chinese crap now, all mirrors I find are down. Where did you find this zip? maybe I can find a firmware there. I need to flash it from 0 because I did a mess with adb and deleted every system app
Hello everyone
do you have an update.zip SuperSU-v2.82
Best Regards
Great !
Nejix83 said:
Root method for recovery
Good afternoon!
To apply the patch-and for rooting you device, it is necessary to get into Recovery.
So try to load into recovery by this way: "Settings-> Recovery and reset-> Recovery Mode".
After rebooting, you see some menu where you should select drive(sd card) on which the pre-recorded file "Update.zip"
After finishing, restart your device use first point of menu.
Now you have a root, it is necessary to update the SuperSu by selecting "OK".
P.S.
I didn't test it but find it on some good forums. Send privet massage to me if you have some questions.
Root_patch
Click to expand...
Click to collapse
That's work fine.
My Tv Box is Q Plus Android 9.
Maybe it can help : You can use the rom of Vorkez 7 in Q Plus, because they have same hardware.
steleclanel1 said:
That's work fine.
My Tv Box is Q Plus Android 9.
Maybe it can help : You can use the rom of Vorkez 7 in Q Plus, because they have same hardware.
Click to expand...
Click to collapse
@steleclanel1
Hi, I have a Q Plus box too and have managed to root it but I need to bypass google play device check. I have edited build.prop successfully but can't find the global settings database to complete this. Are you able to help... does the Vorkez 7 rom allow for this? Thanks
thanks, it is work fine