i am trying to install my e400 and at command
adb shell "ln -s /data /data/gpscfg/gps_env.conf"
i take a msg "permission denied"
any suggestion?
Try this:
adb shell
su (then accept from phone)
ln -s /data/data/gpscfg/gps_env.conf
If you want enter to /data folder, you should have root acces.
fbli_41 said:
Try this:
adb shell
su (then accept from phone)
ln -s /data/data/gpscfg/gps_env.conf
If you want enter to /data folder, you should have root acces.
Click to expand...
Click to collapse
http://prntscr.com/4qudfm
Still cant :/
when i type ''su'' nothing appers in screen
[email protected] said:
http://prntscr.com/4qudfm
Still cant :/
when i type ''su'' nothing appers in screen
Click to expand...
Click to collapse
finally rooted it with Kingo.
Is the problem solved?
fbli_41 said:
Is the problem solved?
Click to expand...
Click to collapse
yes yes ...i just enabled usb debugging ,inserted usb ,run Kingo Root and rooted successfully
I'm happy
[email protected] said:
finally rooted it with Kingo.
Click to expand...
Click to collapse
Thank you very much! :victory:
Related
hey guys i'm having problem in adb when i put the remount command
it gives this message : opreation remount not prometted
why is that??? i'm rooted on ba023 and a lot of programs that use su is working correctly
h.boushi1987 said:
hey guys i'm having problem in adb when i put the remount command
it gives this message : opreation remount not prometted
why is that??? i'm rooted on ba023 and a lot of programs that use su is working correctly
Click to expand...
Click to collapse
Try typing 'su' (without inverted commas) before that command, when using your phone, and on a PC, do 'adb shell su' or 'adb shell' then 'su'. The command should now work.
You have to do this, if you followed the 'secure root' instructions before.
thanks man it works!!!!!
Sent from my X10i using the XDA mobile application powered by Tapatalk
Is there any way to root Toshiba excite at300se ?.Or Stock ROM link .I try to find the adb driver and CWM for the this tablet.:crying:
Don't worry bro.....
We will find the solution (one day)
did anyone find a way to root the AT300SE (Excite 10SE), or the AT305, they are the same as far as I know
the AT305 is the US edition.
Check this below link for ABD driver from Toshiba
hxxp://support.toshiba.com/support/viewContentDetail?contentId=4001725
Hope there will some more development for this device..
Finally rooted !!!
Hopelessly I tried the Motochopper and it WORKED !!!
My AT300SE is rooted.
You need:
a PC,
the motochopper http://forum.xda-developers.com/showthread.php?t=2228613
and
ADB driver http://support.toshiba.com/support/viewContentDetail?contentId=4001725
*edit*
Attention please: only for 4.1 JB (not 4.0.3 ICS)
tasos66 said:
Finally rooted !!!
Hopelessly I tried the Motochopper and it WORKED !!!
My AT300SE is rooted.
You need:
a PC,
the motochopper http://forum.xda-developers.com/showthread.php?t=2228613
and
ADB driver http://support.toshiba.com/support/viewContentDetail?contentId=4001725
Click to expand...
Click to collapse
Thank man for the update..
Did u try CWM or TWRP For recovery .To make stock backup
are you sure that it worked???
Doesn't seem to work on the Excite 10LE aka At200 :crying:
ftomas said:
are you sure that it worked???
Doesn't seem to work on the Excite 10LE aka At200 :crying:
Click to expand...
Click to collapse
For at300se it worked perfectly.
What exactly is the problem?
Did the pc recognized the device, as an adb connection?
tasos66 said:
For at300se it worked perfectly.
What exactly is the problem?
Did the pc recognized the device, as an adb connection?
Click to expand...
Click to collapse
I don't have the at200 here....
i didn't get any errors from the script, if i didn't have the correct drivers should have been an error on the script, no?
the script runs... and then i ask for enter to reboot.... the at200 reboots but no working SU
ftomas said:
I don't have the at200 here....
i didn't get any errors from the script, if i didn't have the correct drivers should have been an error on the script, no?
the script runs... and then i ask for enter to reboot.... the at200 reboots but no working SU
Click to expand...
Click to collapse
Sorry to hear that
there are several Motochopper versions out there, how many Mb is the zip file that you downloaded?
I downloaded four or five of them, maybe one of them will work for you.
tasos66 said:
Sorry to hear that
there are several Motochopper versions out there, how many Mb is the zip file that you downloaded?
I downloaded four or five of them, maybe one of them will work for you.
Click to expand...
Click to collapse
+/- 2mb
where can i find those files?
ftomas said:
+/- 2mb
where can i find those files?
Click to expand...
Click to collapse
I will send you the file I used and worked for at300se, later today (about 22:00 Greek time)
---------- Post added at 03:01 PM ---------- Previous post was at 02:13 PM ----------
ftomas said:
+/- 2mb
where can i find those files?
Click to expand...
Click to collapse
O.K. I found the link.
http://mirror21.downloadandroidrom.com/download/GalaxyS4/root/motochopper.zip?token=
Good Luck!
tasos66 said:
Finally rooted !!!
Hopelessly I tried the Motochopper and it WORKED !!!
My AT300SE is rooted.
You need:
a PC,
the motochopper http://forum.xda-developers.com/showthread.php?t=2228613
and
ADB driver http://support.toshiba.com/support/viewContentDetail?contentId=4001725
Click to expand...
Click to collapse
Did not work for me either. I own an AT300SE-101
Click for details here.
http://forum.xda-developers.com/showthread.php?p=42700267#post42700267
Worked fine.No problem for rooting device (at300se).......:good: After the root superSu got update and as well as binary.
Is any update on Recovery and stock ROM....
dashu42332 said:
Worked fine.No problem for rooting device (at300se).......:good: After the root superSu got update and as well as binary.
Is any update on Recovery and stock ROM....
Click to expand...
Click to collapse
I dont know whats the problem.... but dont work
ftomas said:
I dont know whats the problem.... but dont work
Click to expand...
Click to collapse
Disable antivirus software and firewall.
tasos66 said:
Disable antivirus software and firewall.
Click to expand...
Click to collapse
Hummm, did you see the photo i post?
ADB seems to be working... or not? the push command seem to be successful... its fails when installing superuser.apk?
Other thing... this is part of the the run.bat with some notes in front, because i don't know linux can you see if the notes are right?:
adb push pwn /data/local/tmp/ - send the pwn (exploit) to the tablet
adb shell chmod 755 /data/local/tmp/pwn - change pwn permissions
echo [*] Pushing root tools...
adb push su /data/local/tmp/ - send SU to the tablet
adb push busybox /data/local/tmp/ send busybox to the tablet
adb install Superuser.apk - install superuser on the tablet (where scrip seem to give the error)
echo [*] Rooting phone...
adb shell /data/local/tmp/pwn - WHATS THIS COMMAND DOES?
echo [*] Cleaning up...
adb shell rm /data/local/tmp/pwn - delete pwn
adb shell rm /data/local/tmp/su - delete SU
adb shell rm /data/local/tmp/busybox - delete busybox
echo [*] Exploit complete
ftomas said:
Hummm, did you see the photo i post?
ADB seems to be working... or not? the push command seem to be successful... its fails when installing superuser.apk?
Other thing... this is part of the the run.bat with some notes in front, because i don't know linux can you see if the notes are right?:
adb push pwn /data/local/tmp/ - send the pwn (exploit) to the tablet
adb shell chmod 755 /data/local/tmp/pwn - change pwn permissions
echo [*] Pushing root tools...
adb push su /data/local/tmp/ - send SU to the tablet
adb push busybox /data/local/tmp/ send busybox to the tablet
adb install Superuser.apk - install superuser on the tablet (where scrip seem to give the error)
echo [*] Rooting phone...
adb shell /data/local/tmp/pwn - WHATS THIS COMMAND DOES?
echo [*] Cleaning up...
adb shell rm /data/local/tmp/pwn - delete pwn
adb shell rm /data/local/tmp/su - delete SU
adb shell rm /data/local/tmp/busybox - delete busybox
echo [*] Exploit complete
Click to expand...
Click to collapse
It looks like the adb driver works fine but I am afraid your tablet can not be rooted by this method .
I am IT engineer and manager but not Android developer so I cannot help you any furthermore.
Maybe this is a good reason for a tablet upgrade
Good luck!
regards
Tasos
Please check your Android version in your tab. Because above steps will work only for Android version 4.1 or above. ....
dashu42332 said:
Please check your Android version in your tab. Because above steps will work only for Android version 4.1 or above. ....
Click to expand...
Click to collapse
hum......
I only have ICS 4.0.3
This Guide is for those who cant root their devices by tools like SuperOne , UnlockRoot etc .Because Adb cant recognize their devices .
This is a manual method and i like it most . first thing you need is adb .
download su and superuser.apk . download and install moborobo . now extracy su and superuser to your adb folder .
now connect a27 with moborobo . it will install drivers . dont disconnect your device with moborobo .
While connected with moborobo open command prompt in your adb folder .
type
Code:
adb devices
if you find your device listed then type
Code:
adb remount
Code:
adb push su /system/bin/
Code:
adb push su /system/xbin/
Code:
adb shell chmod 4755 /system/bin/su
Code:
adb shell chmod 4755 /system/xbin/su
Code:
adb install superuser.apk
Hey,, i cant install the spreadtrum driver it is showing does not contain 3rd party digital signature
rv6598 said:
Hey,, i cant install the spreadtrum driver it is showing does not contain 3rd party digital signature
Click to expand...
Click to collapse
install google drivers . no need to install spreadtrum .
pls send me driver link
driver link pls.... thnks
moborobo is not installing the driver
cant find the device in command prompt
Pls help me
i cant find the devices in the command prompt
rv6598 said:
Pls help me
i cant find the devices in the command prompt
Click to expand...
Click to collapse
try moborobo method .
not working
it is not working
Vibhav Jha said:
This Guide is for those who cant root their devices by tools like SuperOne , UnlockRoot etc .Because Adb cant recognize their devices .
This is a manual method and i like it most . first thing you need is adb .
download su and superuser.apk . download and install moborobo . now extracy su and superuser to your adb folder .
now connect a27 with moborobo . it will install drivers . dont disconnect your device with moborobo .
While connected with moborobo open command prompt in your adb folder .
type
Code:
adb devices
if you find your device listed then type
Code:
adb remount
Code:
adb push su /system/bin/
Code:
adb push su /system/xbin/
Code:
adb shell chmod 4755 /system/bin/su
Code:
adb shell chmod 4755 /system/xbin/su
Code:
adb install superuser.apk
Click to expand...
Click to collapse
where i can find adb folder and where i have to extract???????????
rv6598 said:
Hey,, i cant install the spreadtrum driver it is showing does not contain 3rd party digital signature
Click to expand...
Click to collapse
i have driver link but due to i am a new to xda therefore xda not allowing me to post outsiders link so plz mail me if u want driver link
[email protected]
Micromax bolt a27
Vibhav Jha said:
This Guide is for those who cant root their devices by tools like SuperOne , UnlockRoot etc .Because Adb cant recognize their devices .
This is a manual method and i like it most . first thing you need is adb .
download su and superuser.apk . download and install moborobo . now extracy su and superuser to your adb folder .
now connect a27 with moborobo . it will install drivers . dont disconnect your device with moborobo .
While connected with moborobo open command prompt in your adb folder .
type
Code:
adb devices
if you find your device listed then type
Code:
adb remount
Code:
adb push su /system/bin/
Code:
adb push su /system/xbin/
Code:
adb shell chmod 4755 /system/bin/su
Code:
adb shell chmod 4755 /system/xbin/su
Code:
adb install superuser.apk
Click to expand...
Click to collapse
is it applicable to Micromax Bolt A27
Micromax A27 Big Problem.....Help..!!!
[email protected] said:
is it applicable to Micromax Bolt A27
Click to expand...
Click to collapse
hiiiii...
theres a big problem with me..with my micromax a27
i hv installed cwm and taken backup of stock rom.
but mistakenly formatted system,data,cache....and all things in mounts and storage.
and then i realised that for booting into cwm is through quick boot (from thats what i was booting to recovery, i dont know any other way to boot)...
so u know my problem.....
plz say any way through which i can directly boot into cwm recovery and get my phone back...through buttons.....
plz im in big trouble and i waiting for replies.....
plz do reply immediately.....
there has to be a way out there to recover back...
Through pc....cmon dev's
Plz reply with concern. .....its very important to me.....
Plz show all the instructions....
not working help us to root micromax a27
unlockroot ( with moborobo) not working
First.. Use a powerful cable for e.g. samsung galaxys or canvas hds usb cable.. Your phone will be recognized by adb too.. Once that happens unlockroots good to go
Sent from my XT1028 using XDA Free mobile app
---------- Post added at 05:55 AM ---------- Previous post was at 05:46 AM ----------
Im no dev but.. If u want to boot into recovery u first have to boot in fastboot mode "power + volume down" .. Then you have to download recovery.img of ur phone from google then .. Check if your phone is connected by typing "fastboot devices"
If it shows a random number your good to go.. Den put your downloaded recovery.img in your ad and fast boot folder.. N open fastboot by pressing shift and right click and open window here and type "fastboot flash boot recovery.img" and then normal remove battery and normal boot.. U will boot in recovery
Sent from my XT1028 using XDA Free mobile app
I just used Odin3 v3.04 and CF-Root-SGS3-v6.4 to root my Samsung Galaxy S III. It seems root worked because CWM was installed and as i tried to execute it, i had to grant root rights to this app. But i can't execute adb root since its telling me "adbd cannot run as root in production builds". I can't access /data through ES Explorer on my phone either. Does anyone have a solution?
Djablos said:
I just used Odin3 v3.04 and CF-Root-SGS3-v6.4 to root my Samsung Galaxy S III. It seems root worked because CWM was installed and as i tried to execute it, i had to grant root rights to this app. But i can't execute adb root since its telling me "adbd cannot run as root in production builds". I can't access /data through ES Explorer on my phone. Does anyone have a solution?
Click to expand...
Click to collapse
Try by flashing this zip file from CWM: http://download.chainfire.eu/370/SuperSU/UPDATE-SuperSU-v1.80.zip
That may fix your issue..
EDIT: this wont flash any new app to your SGS3, it will flash updated su script.
suyash1629 said:
Try by flashing this zip file from CWM: http://download.chainfire.eu/370/SuperSU/UPDATE-SuperSU-v1.80.zip
That may fix your issue..
EDIT: this wont flash any new app to your SGS3, it will flash updated su script.
Click to expand...
Click to collapse
I get the following message when i start CWM:
After that i cant see any possibility to flash something (or i dont really know what else do you mean by "flash from cwm")
Djablos said:
I get the following message when i start CWM:
After that i cant see any possibility to flash something.
Click to expand...
Click to collapse
just press ok and then press reboot in recovery mode and flash it through there.. else press the combination of Volume up + Power + Home button to enter the recovery.. you nneed to flash it through there
suyash1629 said:
just press ok and then press reboot in recovery mode and flash it through there.. else press the combination of Volume up + Power + Home button to enter the recovery.. you nneed to flash it through there
Click to expand...
Click to collapse
Unfortunately It didn't fix my issue. It don't get any message for "adb root" and device is getting disconnected after that.
Code:
>adb devices
List of devices attached
4df1ec9f1b844f57 device
>adb root
>adb devices
List of devices attached
Still no luck for access to the folder from the phone.
Djablos said:
Unfortunately It didn't fix my issue. It don't get any message for "adb root" and device is getting disconnected after that.
Code:
>adb devices
List of devices attached
4df1ec9f1b844f57 device
>adb root
>adb devices
List of devices attached
Still no luck for access to the folder from the phone.
Click to expand...
Click to collapse
Go to developer options and enable root access to both apps and adb, this may fix that problem..
suyash1629 said:
Go to developer options and enable root access to both apps and adb, this may fix that problem..
Click to expand...
Click to collapse
Do you mean developer options of the phone? I can't find any options there regarding root access. I checked SuperSU app, but there is also only list of apps with root access and no possibilities to add apps.
Djablos said:
Do you mean developer options of the phone? I can't find any options there regarding root access. I checked SuperSU app, but there is also only list of apps with root access and no possibilities to add apps.
Click to expand...
Click to collapse
yes it should be in developer options of the phone, m not sure if its in stock firmware.. if there is no such option than first try adb shell and then su, than it will prompt to give root access to shell. have you tried doing that?
suyash1629 said:
yes it should be in developer options of the phone, m not sure if its in stock firmware.. if there is no such option than first try adb shell and then adb su, than it will prompt to give root access to shell. have you tried doing that?
Click to expand...
Click to collapse
Well now we're talking! I didn't know there is a possibility to gain root that way. Thank you for your help!
Djablos said:
Well now we're talking! I didn't know there is a possibility to gain root that way. Thank you for your help!
Click to expand...
Click to collapse
well thats nothing, but why do you want to do by using adb?
suyash1629 said:
well thats nothing, but what do you want to do by using adb?
Click to expand...
Click to collapse
I want to pull some apps to my PC to decompile them. I'm preparing myself for a seminar on my uni.
Djablos said:
I want to pull some apps to my PC to decompile them. I'm preparing myself for a seminar on my uni.
Click to expand...
Click to collapse
oh.. and as i said above to use adb shell and then adb su, that might too work but simply use su after adb shell, i dont know how i entered adb su.
suyash1629 said:
oh.. and as i said above to use adb shell and then adb su, that might too work but simply use su after adb shell, i dont know how i entered adb su.
Click to expand...
Click to collapse
Well, since i logged once with adb as root, the phone seems to give now permanently root access to adb. So i just used "adb pull /data/app/com...." with no problem.
Djablos said:
Well, since i logged once with adb as root, the phone seems to give now permanently root access to adb. So i just used "adb pull /data/app/com...." with no problem.
Click to expand...
Click to collapse
thats fine but next time you can also use su to be root user over adb.. maybe next time also adb root wont work and you have to use adb shell asnd su to be root user..
suyash1629 said:
thats fine but next time you can also use su to be root user over adb.. maybe next time also adb root wont work and you have to use adb shell asnd su to be root user..
Click to expand...
Click to collapse
Well to be precise, "adb root" still doesnt work, so i can gain root access only over shell->su. But it is completely sufficient for my purposes.
Djablos said:
Well to be precise, "adb root" still doesnt work, so i can gain root access only over shell->su. But it is completely sufficient for my purposes.
Click to expand...
Click to collapse
adb root is not working because root access to adb is not available from developers option, so thats only way to gain root access. And also best of luck for seminar..
suyash1629 said:
And also best of luck for seminar..
Click to expand...
Click to collapse
Thanks, I will definitely need some luck
Real Root
Real root is odin root!
I was trying to install gapps and now when I reboot I am stuck and the Play Store language select screen. When I click next, it takes me to settings. I have no home or back button so I cant get anywhere other than the settings menu. I have tried a factory reset with no avail. I also tried a manual update, but I have disable OTA updates so it wont recognize the .bin file on my SD. If only I could get to ES File Explorer. Any tips on fixing this problem?
Code:
adb shell "su -c 'mount -o rw,remount /system'"
adb shell "su -c 'mv /system/priv-app/SetupWizard.apk /system/priv-app/SetupWizard.apk.old'"
adb shell "su -c 'mount -o ro,remount /system'"
ONYXis said:
Code:
adb shell "su -c 'mount -o rw,remount /system'"
adb shell "su -c 'mv /system/priv-app/SetupWizard.apk /system/priv-app/SetupWizard.apk.old'"
adb shell "su -c 'mount -o ro,remount /system'"
Click to expand...
Click to collapse
Care to elaborate? I am a complete noob and shouldn't have been trying this at all. I can't access anything on my Kindle other than settings. Do I run this in command prompt on windows?
Edit: I also wanted to add that I am not one of the guys who sits around waiting for an answer without researching the problem lol
You need install adb on your PC - http://forum.xda-developers.com/showthread.php?t=2317790
Install drivers for our tablet (no need to reboot fastboot just manual install drivers for your kindle at device manager) - http://forum.xda-developers.com/showpost.php?p=59268023&postcount=8
Open CMD (cd C:\Program Files (x86)\Minimal ADB and Fastboot>)and paste these commands. I assume you rooted if you can block ota.
ONYXis said:
You need install adb on your PC - http://forum.xda-developers.com/showthread.php?t=2317790
Install drivers for our tablet (no need to reboot fastboot just manual install drivers for your kindle at device manager) - http://forum.xda-developers.com/showpost.php?p=59268023&postcount=8
Open CMD (cd C:\Program Files (x86)\Minimal ADB and Fastboot>)and paste these commands. I assume you rooted if you can block ota.
Click to expand...
Click to collapse
Apparently I no longer have root since I reset to factory. I do have the adb drivers installed, but I get stuck when using the command prompt because I dont have su access. Anyway for me to root it with only access to settings? I am on 4.5.2
are you sure?
earlier I had root even after hard reset on 4.5.2
anyway you could try install kingroot but I do not sure
I think @Cl4ncy and @Davey126 may clarify this.
ONYXis said:
are you sure?
earlier I had root even after hard reset on 4.5.2
anyway you could try install kingroot but I do not sure
I think @Cl4ncy and @Davey126 may clarify this.
Click to expand...
Click to collapse
Yes, I no longer had root access. Thanks to all of your other help and suggestions, I have been able to successfully get my Fire HDX working again. With all of the info you gave I was able to research and piece together what I needed. I was able to install Kingroot through cmd and then use the commands you gave to get rid out of settings. Thanks alot!