Related
i was look for a good case with belt clip
so i bought the official htc case for P6500 on Htc/expansys site
and .. send it back
because it is nothing like it is on the picture
it is not a a belt clip case, it is some kind of "wallet case"
so i search and search....
the only cases that seems to feet is all the universal cases
but no one seems goog enouth
and seem to be imposible to find some horizontal belt clip case
so here is my find
http://www.noreve.com/category/PC+d...tui_cuir_universel_PDA_-_Large_Tradition.html
good quality
just a little large for the p6500, but good
i would like some case that feet the P6500 well , horizontal with belt clip
so until it comes out, this one will make the the job
so if some of you find something better, don't forget to share !
regard
Years ago compaq used to make an expandable fabric case for the 36xx ipaq. I still have mine and it fits the p6500 perfectly. I don't know if it's still possible to acquire it.
Ultimate Sedna Case
I purchased one of these babies a month ago for my new Sedna and LOVE IT!!!!!
http://www.pielframa.net/htc_p6500.asp
Picture shows a brown color case, but it's available in black
Made in Spain
Can't speak highly enough of the quality
Highly recommend
kwburress said:
I purchased one of these babies a month ago for my new Sedna and LOVE IT!!!!!
http://www.pielframa.net/htc_p6500.asp
Picture shows a brown color case, but it's available in black
Made in Spain
Can't speak highly enough of the quality
Highly recommend
Click to expand...
Click to collapse
The P6500 has a bit rounded backsight, so if u tap on the display the HTC waggles. Is this problem solved with the PielFrama?
axle7517 said:
i was look for a good case with belt clip
so i bought the official htc case for P6500 on Htc/expansys site
and .. send it back
Click to expand...
Click to collapse
So did I ... also bought/sent back numerous other cases that were either too big or just plain garbage
axle7517 said:
i would like some case that feet the P6500 well , horizontal with belt clip
so until it comes out, this one will make the the job
Click to expand...
Click to collapse
I finally found & bought one of these from PDAir
They do two or three of them but this one was what I was after, just something to carry it around & clip on me belt
I have one of the ones that kwburress wrote about and found it to be an excellent piece of workmanship, but, I also found that PDAir have some aluminium cases which are handy as well. Thanks to both Prospro and kwburress for their input...
http://www.otterbox.com/htc-cases/htc-p6500-cases/htc-p6500-defender-case/
we use the otterbox, it's great if you need a rugged case for ultimate protection.
I am looking for a good sport armband to keep my X10 while running. Looking for it, I found a couple of items that seems would fit well : a cheap chinese armband and the Nokia CP-402 ...My only doubt is: would it fit well???
What's your opinion about these items??
Anybody using a sport armband with X10??
If you check by dimensions, there's little room for error
Unless you are looking for a plastic molded holster, then any that fits an iphone will work. I was out looking for cases and whatnot and everyhting that fits the iphone, my x10 fit perfectly. Again unless it was a hard plastic mold type cases which obviously will not fit. WOnt be hard to find one if looking for one that fits an iphone, as there is a million an 1 accessories for the dumb iphone.
using one meant to have around neck but instead of that i tied it on my pants belt loop thing so if i happen to drop my phone it will stop at knee height, has saved my phone twice.
Sent from my X10i using the XDA mobile application powered by Tapatalk
skydirt said:
Unless you are looking for a plastic molded holster, then any that fits an iphone will work.
Click to expand...
Click to collapse
I thought it too. Maybe I was unlucky with the model, but I tried a PURE Arm Band that was made for Iphone and it was ABSOLUTELY impossible to fit the X10 in it! The aperture was just too little...
In any case I think I'll look for an Iphone Armband and hope that it fits well!
Thank you all!
I am looking for one too. Since the Pure didn't fit, I am quite anxious to buy one online. So a proven armband would be nice
Today arrived the Sport Armband I ordered from China trough Ebay (
Look for Gym Sport ArmBand Case Holder for Apple iPhone 3G 3GS).
The building quality is poor,but the materials seems, on the opposite, to be quite good. The X10 perfectly fits inside the pouch and,despite the top is open,I don't risk to loose my phone.
What more? It costed me only 2.99 bucks!
-------------------------------------
Sent via the XDA Tapatalk App
ellobo82 said:
Today arrived the Sport Armband I ordered from China trough Ebay (
Look for Gym Sport ArmBand Case Holder for Apple iPhone 3G 3GS).
The building quality is poor,but the materials seems, on the opposite, to be quite good. The X10 perfectly fits inside the pouch and,despite the top is open,I don't risk to loose my phone.
What more? It costed me only 2.99 bucks!
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Hmm, well. It does not sound that bad. But it would be nice with a picture of the armband, if possible?
ukon said:
Hmm, well. It does not sound that bad. But it would be nice with a picture of the armband, if possible?
Click to expand...
Click to collapse
Any news on this?
anyone got lucky and found an armband?
Photo!
Sorry for the hated Iphone inside. After a long period using it I can confirm that it perfectly fits the device (despite being open on the top) and that it is great for running!
ps I posted a Bonamart picture, but if you look on ebay it is plenty of similar items!
ellobo82 said:
Sorry for the hated Iphone inside. After a long period using it I can confirm that it perfectly fits the device (despite being open on the top) and that it is great for running!
ps I posted a Bonamart picture, but if you look on ebay it is plenty of similar items!
Click to expand...
Click to collapse
Hi Lobo.
where did you buy yours?
How is the quality?
Can you post a link please?
thanks
im find it:
http://shop.ebay.com.au/?_from=R40&...band+for+Xperia+X10&_sacat=See-All-Categories
mr.valacky said:
im find it:
http://shop.ebay.com.au/?_from=R40&...band+for+Xperia+X10&_sacat=See-All-Categories
Click to expand...
Click to collapse
yes and you can close it at the top
Exactly!
As you saw it seems there are several versions of the same item, with few differences, sold by several sellers. The whole building quality is middle-low but I never had problems using it.
I preferred to buy the open one, since I was not sure it would fit with the closed top. Anyway, despite being open on the top, it is so tight that the X10 will never slip up!
I found some on ebay. Out of the few the list, there is one made by Motorola, and it's rated "Top-rated Seller."
X10 Sport Armband
Stupid forum rules ... I can't post links.
ebay search: Sport Armband for HTC HD2 Leo EVO 4G Sony Ericsson X10
Just picked this one up on ebay. Hope it fits well ... The x10 is a great phone, but a little bit on the heavy side when jogging My old Nokia Xpress Music 5310 was better that way ... Let me know if anybody wants to know how it is.
Kyrre_Stalsberg said:
Stupid forum rules ... I can't post links.
ebay search: Sport Armband for HTC HD2 Leo EVO 4G Sony Ericsson X10
Just picked this one up on ebay. Hope it fits well ... The x10 is a great phone, but a little bit on the heavy side when jogging My old Nokia Xpress Music 5310 was better that way ... Let me know if anybody wants to know how it is.
Click to expand...
Click to collapse
Have u got it yet? How does it work with x10? Is it closed at the top? Maybe u got a pic to share?
i use the arm strap from the krusell multidapt system - and it fits really well and hold the phone real tight - the krusell multidapt system is really worth its money
x10 sport case
Mckan said:
Have u got it yet? How does it work with x10? Is it closed at the top? Maybe u got a pic to share?
Click to expand...
Click to collapse
Hi. I got it today. Here is a picture (sorry about the flash backfire).
It doesnt close at the top, but it doesn't have to: It fits fine, so I can hold it up-side-down and shake it. It doesn't fall out.
Also, there is a small pocket on the side where you can put away any extra headphone-cable. This was a nice feature. The quality looks overall OK.
Here is the not-so-OK-part: The plastic in front is stiff and lumpy, so the touch is kinda "so-so". Maybe this will get better after some use (maybe the plastic even out), but if you're planing on using the touchscreen alot while it's inside the case, this isn't the case for you.
I'm just gonna use it for music playback while jogging, so for me it's perfect! (7/10)
this is what i've been using. it's a tight fit but the material is stretchy and is able to fit the x10 securely. i bought it last summer for about $10-$15. it doesn't feature a headphone out opening but i use my mw600 bluetooth headphones so i don't need one. it has grip pads on the inside (not shown) to prevent it from sliding down your arm and an adjustable strap.
I need some help looking for a case. I would like something folio style, but all of the pictures of the M1, Px cases look like they stand very upright. I am looking for a case that will lean back to allow it to sit and use as a keyboard stand. Anyone have any ideas for me?
Thanks!
-J
CLIP
I got a CLIP from it2steve's web store and it works as exactly as you are wanting it to. It comes with 3 grooves on one side so you can have the gTab in 3 viewing angles but if you let it all the way down as shown in the attached photo it's perfect for typing.
As a new GTablet owner I was looking for a good case as well. The Clip looks sweet but it seems to be sold out from it2steve's store.
Anyone know where I can score this sweet looking case?
sjmoreno said:
I got a CLIP from it2steve's web store and it works as exactly as you are wanting it to. It comes with 3 grooves on one side so you can have the gTab in 3 viewing angles but if you let it all the way down as shown in the attached photo it's perfect for typing.
Click to expand...
Click to collapse
sj
you pretty happy with your Clip? I was leaning towards the M1, but another forum thread said that magnets in that case cause the screen to freak out...back on the Clip if those who have one are happy....
thanks for info...
smapdi said:
As a new GTablet owner I was looking for a good case as well. The Clip looks sweet but it seems to be sold out from it2steve's store.
Anyone know where I can score this sweet looking case?
Click to expand...
Click to collapse
I'm pretty sure that's the only place to get them. You just have to keep a close eye on the site. I managed to snag one last week, but they were only in stock for a couple of hours.
smapdi said:
As a new GTablet owner I was looking for a good case as well. The Clip looks sweet but it seems to be sold out from it2steve's store.
Anyone know where I can score this sweet looking case?
Click to expand...
Click to collapse
I think I read on his last email that he's got 120 CLIP cases coming in the next shipment.
StingRay_ said:
sj
you pretty happy with your Clip? I was leaning towards the M1, but another forum thread said that magnets in that case cause the screen to freak out...back on the Clip if those who have one are happy....
thanks for info...
Click to expand...
Click to collapse
Yeah, I heard that too about the magnets on the M1.
I am very happy with my CLIP case. In my opinion it is the only Apple quality accessory we have for the gTab at the moment. It's well worth the extra cash and I can't recommend it any better.
Thanks SJ! Exactly what I'm looking for. Appreciate the pic.
-J
StingRay_ said:
sj
...another forum thread said that magnets in that case cause the screen to freak out...
Click to expand...
Click to collapse
I tried moving a small (1/4" diameter x 1/8" thick disk) rare earth magnet near the screen of my GTab, and didn't see any effects. Has anyone else tried any experiments? How large is the magnet in the case?
I saw a clip style case at staples that's made for the xoom- any chance it would fit our g-tabs?
ZebTheCalvinist said:
I'm pretty sure that's the only place to get them. You just have to keep a close eye on the site. I managed to snag one last week, but they were only in stock for a couple of hours.
Click to expand...
Click to collapse
available now both black and white on AliExpress for $58 shipped, if you would rather spend the time waiting for it in transit from Asia rather than waiting for it to get restocked @ Steve.
Check the thread here.
insight76 said:
I saw a clip style case at staples that's made for the xoom- any chance it would fit our g-tabs?
Click to expand...
Click to collapse
No. I looked into this a few weeks ago (don't remember where I posted that) and the Xoom and gTabs are different sizes. If I remember correctly the gTab was bigger/longer than the Xoom.
StingRay_ said:
sj
you pretty happy with your Clip? I was leaning towards the M1, but another forum thread said that magnets in that case cause the screen to freak out...back on the Clip if those who have one are happy....
thanks for info...
Click to expand...
Click to collapse
As an M1 owner who's used it for a couple of weeks now, I can tell you that the magnet issue, like most things on the Internet, is blown way out of proportion. I use the tablet daily at work, have used it shopping for replacement flooring/furniture for our flooded gameroom, and sitting on the reclining sofa playing Angry Birds. I've never had a problem with the magnets reducing screen responsiveness or "freaking out". My only complaint is that over time, the GTab tends to settle further down in the case, half-hiding the camera and all but covering the ambient light sensor. If you don't plan on propping it up on a desk as often as I do, it makes a wonderful case.
M1 Case and G Tab Screen
I got an M1 case on Monday so I've had it for 3 days now. The fit, feel and look of the case are all excellent so far on mine, however, the it does mess with the screen. The longer it stays in the case the worse it gets. I have done tests in and out of the case, putting to sleep or not, rebooting or not and now have no doubt it is the case but I am not sure if its actually the magnets or not. It could just be the case itself touching the edges of the screen all day. In any case, (some pun intended) the longer it stays in the case, the harder you have to press the outside portions of the screen to get it to react. Mine eventually gets to the point where you cannot press hard enough to get the keys on the keyboard to function. When this happens I put it to sleep, pull it out of the case, wake it up and it works like new again. I will probably be investing in a black clip myself in the near future. This could just be a problem with my particular Gtab and it may not effect others at all but that is my short bit of experience with the M1 Case.
There's a few black clip cases in stock at it2steve's web store now.
WI Global Technology Case for GTablet - $16, delv'd
miatawnt2b said:
I need some help looking for a case. I would like something folio style, but all of the pictures of the M1, Px cases look like they stand very upright. I am looking for a case that will lean back to allow it to sit and use as a keyboard stand. Anyone have any ideas for me?
Click to expand...
Click to collapse
For anyone who doesn't want to spend $50-$60 on a case for a $300 item, WI Global Technology has cheap alternatives. One with clips, one with elastic.
I got the one with clips. For $16 - It's OK.
All ports are accessible.
It's vinyl - NOT leather.
The covers extend about 1/16th" beyond the GTab - just enough protection (for me, anyay)
As you can see. the kickstand angle is about 75 degrees - it would probably be better if it were more like 60.
For $16 delivered, you get what you pay for (maybe a bit more... ymmv).
Search eBay for "fashion leather case gtablet"
- michael
and before anyone asks...
yes, those are LED indicators by the back/menu/home/search buttons.
It's a custom mod which can be seen here
slsmag said:
For anyone who doesn't want to spend $50-$60 on a case for a $300 item, WI Global Technology has cheap alternatives. One with clips, one with elastic.
I got the one with clips. For $16 - It's OK.
All ports are accessible.
It's vinyl - NOT leather.
The covers extend about 1/16th" beyond the GTab - just enough protection (for me, anyay)
As you can see. the kickstand angle is about 75 degrees - it would probably be better if it were more like 60.
For $16 delivered, you get what you pay for (maybe a bit more... ymmv).
Search eBay for "fashion leather case gtablet"
- michael
Click to expand...
Click to collapse
It's WIT Global. I just ordered one for me. $15.99 shipped. It's coming from Hong Kong, so I wonder how long it will take.
merdely said:
It's coming from Hong Kong, so I wonder how long it will take.
Click to expand...
Click to collapse
Mine arrived in just about 2 weeks.
StingRay_ said:
sj
you pretty happy with your Clip? I was leaning towards the M1, but another forum thread said that magnets in that case cause the screen to freak out...back on the Clip if those who have one are happy....
thanks for info...
Click to expand...
Click to collapse
Hmmm been using the M1 for a few weeks now. Never noticed this magnet issue. I know magnets can mess with hard drives but never heard of it messing with an LCD. Doesn't the ipad 2 smart cover have like 70 magnets?
EDIT: Looked it up, 31 magnets.
Yo,
What cases do you use for your G2 Mini?
I think there's no such a big range for g2 mini
In my opinion there is a few interesting positions. I'm using Nillkin frosted shield and for me it's perfect but white colour is not a white anymore... It became dirty-yellow and it's not nice
debowiakr said:
In my opinion there is a few interesting positions. I'm using Nillkin frosted shield and for me it's perfect but white colour is not a white anymore... It became dirty-yellow and it's not nice
Click to expand...
Click to collapse
i want my case to protect the device, not to just be weared. i bought some silicon i think with look like back of sgs5
And what about Nillkin Sparkle leather? It's similar to SGS4 case and it protect whole phone
debowiakr said:
And what about Nillkin Sparkle leather? It's similar to SGS4 case and it protect whole phone
Click to expand...
Click to collapse
I think it's cool but it depends if someone want to use front-cover case or not
I just saw it but i dont know if it would protect your phone from falling. check the youtube and screens how the case looks on the device.
I bought that one but in black:
back is like s5 and the inside is like Spigen and it's made of flexible TPU material. I just don't know how thick it is so it would protect from every fall. In 2 weeks i will get it so i will tell you how it's worn
I ordered that one
http://www.dx.com/p/x-style-protective-tpu-back-case-for-lg-optimus-g2-mini-black-320342
2EUR
I will let you know how it goes..
Wanted one of these, (if only the sales rep could confirm if they have it for D620)
http://za.mobilefun.com/41699-cruzerlite-bugdroid-circuit-case-for-lg-g2-black.htm
http://www.aliexpress.com/store/pro...over-Skin-Double-Color/607983_1899618304.html
Managed to find a QuickView window case from bodyglove
Edit: not bodyglove but voia www.voia.co.kr
Wanted to buy that second case but unfortunately it's unavailable in Poland
debowiakr said:
Wanted to buy that second case but unfortunately it's unavailable in Poland
Click to expand...
Click to collapse
i think it is avaiable, because u can order anything from aliexpress to poland (tylko prawdziwych ludzkich włosów nie można było zamówić haha)
unfortunately i'm still waiting for my case i posted a picture above :/
hope it hasn't lost
what i don't like about the second case @plageran has shown? it has this plastic thing to hold phone on stand - i don't like plastic on case.
i'm not here to hate everything but i'm not a fan of 'S-Line' which @ignasigh likes.
i just don't like when it shines, also like sides of first @plageran case
@ Paviano if i do get confirmation for the cruzerlite, i will definately buy it!
I have a roar quickwindow case works great. To little support the quickwindow have though
Last time I was looking for ,,Stitch" case or something like that, perhaps minions or other characters from Disney, but I couldn't find anything... For G2 of course, they're available but not for ,,mini" version
Polacy, a po angielsku piszą
Yo, finally i'm back with photos of case i purchased
The case fits quite well, the phone is a bit thicker (but still bit smaller than finger), quite good in touch too.
i like to write messages with this case, only.. i rather do not use cases so thats just for fun.
here are the photos:
Wow! It looks very nice
I can recommend case I'm using. accidently dropped a few times my phone, sometimes landed on screen but nothing happened.
Case does its job but like every case .. phone is somewhat thicker so maybe that's why i drop my phone sometimes
yip
I have this one
I have this one. Simple, thin and minimal. (Puro 0.3 mm transparent rubber case)
Sent from my LG-D620 using XDA Free mobile app
invaderjohn said:
I have a roar quickwindow case works great. To little support the quickwindow have though
Click to expand...
Click to collapse
If you could only make it work for cm12 ???
Sent from my LG-D620 using XDA Free mobile app
This one. I'm fully satisfied.
http://www.ebay.com/itm/Shock-Proof...t=LH_DefaultDomain_3&var=&hash=item35cf8546ca
I use these ones, mostly the half-transparent one the fully transparent case is really cheap and therefore the quality is not the best, but in the end it's enough.
Next one will definitely be this:
http://octilus.it/cover-lg-g2-mini-becool-arte-giapponese-la-grande-onda.html
Hey guys,
I know many are after a decent case for the Z3 and I have these 2 which I've covered in a review I posted up recently on Neowin: http://www.neowin.net/news/case-mate-barely-there-for-xperia-z3-review
Hopefully the info helps make up a decision for some of you!
Thank you for thevreview, I have just ordered one of these cases.
Appreciate the review!
Thanks for doing this review, I was kinda concerned if the case-mate barely there for the Xperia Z3 would be compatible with the official dock.
I'll be getting this case but the clear version, as I got the Xperia Z3 in mint silver on 02 and it looks so nice!
I want the clear version too just to be able to see the shiny rear glass
robbiekhan said:
Hey guys,
I know many are after a decent case for the Z3 and I have these 2 which I've covered in a review I posted up recently on Neowin
Hopefully the info helps make up a decision for some of you!
Click to expand...
Click to collapse
I noticed a commenter on the review mentioned how much he disliked cases without symmetry...I feel like I might be the same way, but I'm not sure and would really like a case that could work with the dock. So do you feel like it's not really a big deal? Still comfortable to hold on to? Should I just get over it and get the case? Haha
JBDX1319 said:
I noticed a commenter on the review mentioned how much he disliked cases without symmetry...I feel like I might be the same way, but I'm not sure and would really like a case that could work with the dock. So do you feel like it's not really a big deal? Still comfortable to hold on to? Should I just get over it and get the case? Haha
Click to expand...
Click to collapse
Aye I really don't think it's a big deal. It's slim enough and it's black so doesn't really stand out as a distraction.
I bought a charging dock, and the case, and they should both be here by Tuesday.
I received the Nillkin today and unfortunately the Magnector X charging cable does not fit. I managed to trim a little bit on the sides though and now it works! Good to know before you order
Ah that's good to know cheers!
robbiekhan said:
I want the clear version too just to be able to see the shiny rear glass
Click to expand...
Click to collapse
I know right + it feels so nice in the hand
I actually prefer without the case! Phone feels amazing metal and glass but a case just takes away that feel
I'll just be careful
I like to feel the glass back as well and didn't want to put a case. I am using a bumper to cover the sides to offer some grip
fatalus said:
I received the Nillkin today and unfortunately the Magnector X charging cable does not fit. I managed to trim a little bit on the sides though and now it works! Good to know before you order
Click to expand...
Click to collapse
Did you trim the magnetorx cable? If so where I have this case, and have the cable on the way.
Sent from my Xperia Z3
russell664 said:
Did you trim the magnetorx cable? If so where I have this case, and have the cable on the way.
Sent from my Xperia Z3
Click to expand...
Click to collapse
No, not the cable of course! I trimmed a little bit of the case where the lower part of the magnetic connector touches. You will see it when you receive both the case and the case.
Can anyone verify that the MagnectorX magnetic cable will fit alright with the Case Mate? I just ordered it up as it doesn't fit with my current case. It looks like it will be good to go, but just want to be sure.
It's all open side that end on the Barely There so yeah shouldn't be a problem.
The MagnectorX connector adapter will fit with the Case Mate Barely There, but it is not a completely secure connection. It will charge fine, but moving the phone while it is connected could dislodge it. The angle of the connector is very steep and leaves the cord very close to the case. On this thread http://forum.xda-developers.com/z3/accessories/magtrons-magnector-x202-cable-adapter-t2919541 it appears that the Magnector cable has more clearance. From those pics, it will fit with the case with trouble. The Barely There case works fine with the Z2 dock DK36, however. I purchased that dock since the price was lower than the dock for the Z3.
I also have a Sony XSP-N1BT receiver in my car (basically a dock which turns the phone into the face plate of the receiver and it has the magnetic pins to charge the Xperia phones) and with a little bit of fiddling, the phone will charge with the Barely There.
like the barely there case because of its slim design. but still would prefer a case that covers all the edge as well. maybe the casemate slim tough will be more suitable?
Since barely there is hard plastic, will it cause scratches to the phone eventually?
is The clear's finish is it the same as the black?