I've installed Twerp recovery sort of by mistake (don't ask, its a long story, I'm used to using CWM) and I've managed to wipe the OS from my tablet (7510) along with the folder containing the ROM I was planning to flash. So I now have the tablet in download mode ready to flash an Odin ROM to get me back up and running but all the links I've found to Odin flashable ROM's for the Galaxy 10.1 are dead. Could someone point me in the right direction, any help appreciated.
http://www.sammobile.com/firmwares/2/
Search here. You have to sign up tho.
Sent from my GT-P7500 using Tapatalk
Sherbet66 said:
I've installed Twerp recovery sort of by mistake (don't ask, its a long story, I'm used to using CWM) and I've managed to wipe the OS from my tablet (7510) along with the folder containing the ROM I was planning to flash. So I now have the tablet in download mode ready to flash an Odin ROM to get me back up and running but all the links I've found to Odin flashable ROM's for the Galaxy 10.1 are dead. Could someone point me in the right direction, any help appreciated.
Click to expand...
Click to collapse
just do adb sideload
Related
Hi all,
I did a bad work with my galaxy tab. I've flashed it with a new ROM but this ROM is not working correctly, I can't see correctly my display probably due to a bad driver inside the build. My problem is that I've no more a working ROM on my galaxytab and I can't reflash it.
USB seems not working correctly, so device is powered on but I can't access to it from Windows.
Is there a way to to upload a file to internal storage in recovery mode or download mode?
Thanks
Stefano
Stefano,
Depends what recovery you have as recovery...stock recovery no you can't, clockwork recovery yes you can. From download you can use Odin.
What model Tab do you have? Wifi, 3G? What version firmware were you on before the problem and what do you want to restore to?
Ciao
Hi, yes I've Clockwork installed but how I can 'upload' a file using Odin? The standard guide shows that Odin3 is used only to upload a .tar.md5 file to root the phone....
Thanks
Ste
stemilano said:
Hi, yes I've Clockwork installed but how I can 'upload' a file using Odin? The standard guide shows that Odin3 is used only to upload a .tar.md5 file to root the phone....
Thanks
Ste
Click to expand...
Click to collapse
That's why i asked what sort of tab you have and what you want to flash your tab to..
There are odin files available to go back to 3.0.1, to go to Early Touchwiz, both for Wifi only tabs...if you are really stuck it is often beneficial to go all the way back to 3.0.1 then go in whatever direction you like.
Or, if the tab is sort of working even tho the display is corrupt you might be able to connect and use adb to push a rom to the sdcard and then flash from clockwork. More info Stefano, what have you got by way of tab, and where do you want to get to?
Download the samsung drivers on your computer . Then install android sdk so you can use the adb if you haven't already.Then you can adb to push a rom to your device and flash.
I'll try ASAP...I'll also add ROM and device details.
I've a Samsung Galaxy TAB 10.1 GT-P7500
Problem is with ROM: [ROM][CWM][EUR][3G] BroodComb G-P7500 XWKG9 [ALPHA]
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
Hello everyone. I bricked my US Galaxy Player 4.0 after trying to install a certain ROM for it.
i visited this page:
http://forum.xda-developers.com/showthread.php?t=1531850
for the stock rom and tried to flash the PIT file along with a ROM's PDA file. All i keep getting when i try to reboot it is the Samsung logo followed by the image i'm going to attach to this.
I can get into download mode and everything, i think it's just a matter of having the right files to flash, etc. Can anyone help me out?
ziggs4lyfe said:
Hello everyone. I bricked my US Galaxy Player 4.0 after trying to install a certain ROM for it.
i visited this page:
http://forum.xda-developers.com/showthread.php?t=1531850
for the stock rom and tried to flash the PIT file along with a ROM's PDA file. All i keep getting when i try to reboot it is the Samsung logo followed by the image i'm going to attach to this.
I can get into download mode and everything, i think it's just a matter of having the right files to flash, etc. Can anyone help me out?
Click to expand...
Click to collapse
follow the proper instructions in that link with the proper files for the US version, when using those files to recover you use Heimdall not ODIN, also make you have a good backup of your EFS.tar or you'll be like me after screwing around with the CM7 beta's and not have a lockscreen or powermenu.
Simple flashing the PIT and the "stock" .tar via Odin will NOT work, I assume your trying to use Odin because you say "with a ROM's PDA file" and there is no PDA box if you are doing what that link says to do for the US version.
That's exactly how I bricked my Galaxy Player 4. Except that I can't enter recovery or download mode. I have to enter download mode with Adam's Resurrector. I used Heimdall with those files and I keep getting error: failed to receive response. So I have no way to revive my player.
ziggs4lyfe said:
Hello everyone. I bricked my US Galaxy Player 4.0 after trying to install a certain ROM for it.
i visited this page:
http://forum.xda-developers.com/showthread.php?t=1531850
for the stock rom and tried to flash the PIT file along with a ROM's PDA file. All i keep getting when i try to reboot it is the Samsung logo followed by the image i'm going to attach to this.
I can get into download mode and everything, i think it's just a matter of having the right files to flash, etc. Can anyone help me out?
Click to expand...
Click to collapse
Did you wipe your data?
Sent from my GT-I9000 using xda premium
zaclimon said:
Did you wipe your data?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
yea, he should do it at first after flashing right kernel and rom, factory reset, format cache, clean dalvik and fix permissions, if not through CWM, just manualy (adb console)
Mine is hard bricked, but I can still get into download mode with the resurrector. But when I try to flash the correct rom and kernel, I get the following error in Heimdall: "kernel upload failed", anyone how to fix this?
Thats just soft bricking ur fine go back to stock start over find the stock tar files
Sent from my SAMSUNG-SGH-I997 using XDA
Sorry to confuse you, mine is most definitely hard bricked.
Hello,
This is my first time installing a custom rom and I hope i did everything right. I installed CM9 using the guide found on their wiki page and installed it successfully. But after installation i cannot get my sim card to work on the phone.
Recovery: ClockWorkMod
CM9: 9.0.0-i9300
Galaxy SIII international.
Thanks in advance
Muzammil Ahmed
muxammle said:
Hello,
This is my first time installing a custom rom and I hope i did everything right. I installed CM9 using the guide found on their wiki page and installed it successfully. But after installation i cannot get my sim card to work on the phone.
Recovery: ClockWorkMod
CM9: 9.0.0-i9300
Galaxy SIII international.
Thanks in advance
Muzammil Ahmed
Click to expand...
Click to collapse
try reinstall a stock rom, check if everythings is fine then reinstall CM9
Thnx for the quick response
I think the problem isn't cm9, when I was trying to install the from I couldn't boot to the cwm recovery because I forgot to root my device. Then I rooted my s3 with cf something root kit and then my signals were gone. I have the international version so my phone should be factory unlocked so I thought I should install cm anyway cuz that might solve the problem. But it didn't. I really like cyanogenmod and don't want to revert back to crappy touchwizz . The problem was there before installing cm9 but after rooting my phone.
Please any help. I really need to use my phone.
Thnx
Muzammil
muxammle said:
Thnx for the quick response
I think the problem isn't cm9, when I was trying to install the from I couldn't boot to the cwm recovery because I forgot to root my device. Then I rooted my s3 with cf something root kit and then my signals were gone. I have the international version so my phone should be factory unlocked so I thought I should install cm anyway cuz that might solve the problem. But it didn't. I really like cyanogenmod and don't want to revert back to crappy touchwizz . The problem was there before installing cm9 but after rooting my phone.
Please any help. I really need to use my phone.
Thnx
Muzammil
Click to expand...
Click to collapse
You should reinstall everything from the scratch mate, so revert your device at stock (using odin), then flash the correct [email protected] kernel and finally if everything is working flash cm9.
Edit: if your device is locked i think you can unlock it easily, search in the forum you can find out everything you need for this.
Sent from my GT-I9300 eating Jelly Bean
sorry mate ..
i am a complete noob, i dont know how to revert to stock rom, stock recovery and unroot my device
Download original firmware for your phone from sammobiles and flash it using odin. If is good then root it again and flash cm9.
Sent from my GT-I9300 using xda app-developers app
Arsaw said:
Download original firmware for your phone from sammobiles and flash it using odin. If is good then root it again and flash cm9.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Okay,
I have downloaded my firmware file but i noticed that i need three tar files for the flashing precess through ODIN but i downloaded only 1 file *.tar.md5
no clue now what to do
Update: I tried to extract the file using splitfus but it didnt work.
Update 2: Okay now I have Installed my stock firmware and it seems to be working now.. But should I risk installing the CM9 again ?
muxammle said:
Okay,
I have downloaded my firmware file but i noticed that i need three tar files for the flashing precess through ODIN but i downloaded only 1 file *.tar.md5
no clue now what to do
Update: I tried to extract the file using splitfus but it didnt work.
Click to expand...
Click to collapse
- launch Odin
- load that ONE FILE on PDA section
- put your phone in download mode (volume down+home+power)
- connect the phone to computer, wait for drivers to be installed and ODIN to find your phone (you will see a message in Odin)
- click start
- don't touch the phone until it's done. It will boot alone
Also, it might be a good idea to wipe data / reset to factory before and after flash.
You could find all this info with google ....
On the topic, I have a similar issue. My phone was factory unlocked , and got locked after flashing latest stock firmware. Downgrading didn't solved anything. I am searching the forums right now, but it seems like all fixes are dated.
If anyone could point me in the right direction, it will be appreciated.
Thx
Hey rsndetre,
Thnx for the post, but sorry I already did that and it worked ..
Here are the method I used to get back my device back to normal and got my sim card working and again reinstalled cm9
1- Downloaded Toolkit from http://forum.xda-developers.com/showthread.php?t=1703488
2- Flashed Stock Boot Image
3- Flashed Stock Recovery Mode
4- Downloaded stock firmware from http://fus.nanzen.se/
5- Flashed stock firmware using Odin (your method above)
6- Rooted the device again (using odin and CF-Root-SGS3-v6.4)
7- Downloaded and placed cm9 and google apps package in SDCARD
8- Installed Rom Manager from Play Store.
9- Downloaded and Installed ClockWorkMod from rom manager and booted to recovery mode using RomManager
10- Then factory resetted, formatted the cache and installed the CM9 and GAPPS V11
Then my phone was good to go.
My phone is up and running, thanks rsndetre, Arsaw and TecQuality for your replies. I appreciate your time
Thanks
Muzammil Ahmed.
I have an Acer Liquid Z500 I want to know if the STOCK ROM downloaded from the official Acer site can be installed using the STOCK recovery. I searched over and over and i couldn't find anything about this so I posted it here.
I don't want to flash a custom recovery, I still a "noob" in this domain knowing that this phone is an MTK65xx based (there is no Liquid Z500 tutorials on the whole XDA forum LOL) so "normal installation ways" such as ODIN (not compatible and google is FILLED with ODIN ODIN ODIN ODIN ODIN ODIN ODIN ODIN. and that makes it difficult to me to find the appropriate guide) can brick it.
In the recovery there is an "install update.zip from SDcard" so I don't know if someday I bricked my phone I could install the STOCK ROM using this option or no so a will have a Plan B if this ocurrs.
Yes, my phone is rooted.
AND!!! I don't want a guide of how to install the custom recovery, because I find it too risky for me, if something went wrong I cannot solve it (it has an integrated battery so I can't remove it).
And thank you for your answers :laugh:
PS: It's my first post after a deep desesperation not being able to find an answer for my question :crying:
Hello, My old S2 was dead (i thought), but after i remember charging it for a night, it suddenly worked again.
The problem is, i had a rom Resurection Remix, and i want to put a stock 4.1.2 rom.
My pc didn't recognize the phone via usb, it charges but nothing more. So i can't use Odin. I can enter recovery and download mode. I tried to do a factory reset via recovery mode, but now the phone is stuck in the resurection remix logo.. I can only install a new rom using the recovery mode and 'installing from zip', but i can't find a working link to that rom. even here on Xda the links are dead.
Phone is from europe.
Can anyone provide me a link to a stock rom please?
Thanks in advance
Edit: I was able to download a Resurection Remix rom and install using CWM. Phone not stuck on boot anymore. But still can't find a stock Rom (zip) so i can install it using the recovery mode, because that's the only option i have, since my pc still doesn't recognize my phone as usb.
Hi,
Given the situation that you have experienced, it seems that your USB port on you phone needs replacing. This is highly recommended as if something does happen to your phone, you won't be able to restore it.
The closest ROM I could find that is based on stock ROM is NeatROM which can be found in the link below:
NeatROM thread
Stock ROM should only be flashed via ODIN which requires a working USB port and a PC nearby.
Saber
Saber said:
Hi,
Given the situation that you have experienced, it seems that your USB port on you phone needs replacing. This is highly recommended as if something does happen to your phone, you won't be able to restore it.
The closest ROM I could find that is based on stock ROM is NeatROM which can be found in the link below:
NeatROM thread
Stock ROM should only be flashed via ODIN which requires a working USB port and a PC nearby.
Saber
Click to expand...
Click to collapse
Someone in the S2 community could convert a stock .tar into a recovery flashable zip. There are many here for other devices.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
SirWiland said:
Hello, My old S2 was dead (i thought), but after i remember charging it for a night, it suddenly worked again.
The problem is, i had a rom Resurection Remix, and i want to put a stock 4.1.2 rom.
My pc didn't recognize the phone via usb, it charges but nothing more. So i can't use Odin. I can enter recovery and download mode. I tried to do a factory reset via recovery mode, but now the phone is stuck in the resurection remix logo.. I can only install a new rom using the recovery mode and 'installing from zip', but i can't find a working link to that rom. even here on Xda the links are dead.
Phone is from europe.
Can anyone provide me a link to a stock rom please?
Thanks in advance
Edit: I was able to download a Resurection Remix rom and install using CWM. Phone not stuck on boot anymore. But still can't find a stock Rom (zip) so i can install it using the recovery mode, because that's the only option i have, since my pc still doesn't recognize my phone as usb.
Click to expand...
Click to collapse
Hello, I got the same problem. So I wrote the complete tutorial to flash without Odin !
Follow me : https://forum.xda-developers.com/galaxy-s2/help/guide-tutorial-samsung-galaxy-s2-i9100-t3538601
djibe89 said:
Hello, I got the same problem. So I wrote the complete tutorial to flash without Odin !
Follow me : https://forum.xda-developers.com/galaxy-s2/help/guide-tutorial-samsung-galaxy-s2-i9100-t3538601
Click to expand...
Click to collapse
They wanted to go back to stock 4.1.2, they don't want a custom ROM.
Sent from my SCH-I535 using Tapatalk
I am wanting to download stock ROM for GTi9100 (Australia) and would appreciate any help with a download link where I am NOT going to get malware or have to pay a fee. Samsung site does not recognise a search for S2 GTi9100 neither does sammobile. I have tried dozens of threads on XDA site but just get redirected to some crap site or the links are no longer active. Can anyone help please.
Franklin46 said:
I am wanting to download stock ROM for GTi9100 (Australia) and would appreciate any help with a download link where I am NOT going to get malware or have to pay a fee. Samsung site does not recognise a search for S2 GTi9100 neither does sammobile. I have tried dozens of threads on XDA site but just get redirected to some crap site or the links are no longer active. Can anyone help please.
Click to expand...
Click to collapse
What mobile carrier do you use?
I found these two firmwares for i9100 in Australia
XSA-https://www.sammobile.com/firmwares/galaxy-s-/GT-I9100/XSA/
Optus-https://www.sammobile.com/firmwares/galaxy-s-/GT-I9100/OPS/
Create a free account there and choose the "free download" option, it won't cost anything and won't have malware, the download will take a little longer though, just be patient.