[Q] Cannot install TWRP / CWM - Xperia Z2 Q&A, Help & Troubleshooting

After spending about 10 hours, i was able to root / unlock the bootloader, but i can't install the custom recovery, i tried TWRP and CWM also
I checked if the phone is rooted / bootloader unlocked. \
Do you have any ideas, guys ? What methode did you use ? And, which custom recovery, for Xperia Z2 ? TWRP or CWM ?
My phone version is D6503 / build number 17.1.1.A.0.402 / Android 4.4.2 /
I tried everything possible, but i cannot boot into recovery mode ( if there is any installed )
The drivers are ok, i downloaded from here : http://developer.sonymobile.com/downloads/drivers/
Would you please, help me ?
Thanks in advance

http://forum.xda-developers.com/showthread.php?p=51547721
Download V4 (its for 402 fw) and flash to boot partition
Z2 doesnt have recovery partition
Flashtool may help > flashtool.net
You seem like you know enough, hence the short answer
Need any help just ask

Envious_Data said:
http://forum.xda-developers.com/showthread.php?p=51547721
Download V4 (its for 402 fw) and flash to boot partition
Z2 doesnt have recovery partition
Flashtool may help > flashtool.net
You seem like you know enough, hence the short answer
Need any help just ask
Click to expand...
Click to collapse
I flashed TWRP 10 minutes ago, and the phone rebooted into TWRP. i did a backup, it took few seconds ( ?? ) and after i rebooted, all i see now is the SONY logo.
Nothing else.
How could i restore the backup i made 10 minutes ago ?
Thanks

Where is the download link for v4 ?
Thank you

nex_t said:
Where is the download link for v4 ?
Thank you
Click to expand...
Click to collapse
Sorry for no link
There is a screenshot below showing where

Related

Bootloader & Recovery HELP PLEASE

Hi,
I unlocked my bootloader, flashed boot.image and CM snapshot 12 and then after setting up my phone I tried installing TWRP 2.8 with that stupid TWRP Play Store app.
NOW i cannot get into bootloader OR recovery with neither the bootmenu nor adb commandline nor the Volume+- on reboot...
PLEASE HELP me get TWRP 2.8 on my device... OR get me back into Recovery... I'm going crazy here
Turning off the phone and using the volume buttons after turning it on, gives me a black screen with an orange LED for recovery. How do I fix this.
PLEASE, there must be someone out there that can help me get recovery back???
Puffin617 said:
Hi,
I unlocked my bootloader, flashed boot.image and CM snapshot 12 and then after setting up my phone I tried installing TWRP 2.8 with that stupid TWRP Play Store app.
NOW i cannot get into bootloader OR recovery with neither the bootmenu nor adb commandline nor the Volume+- on reboot...
PLEASE HELP me get TWRP 2.8 on my device... OR get me back into Recovery... I'm going crazy here
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=53220435&postcount=4
here is a recovery guide
i suggest sticking with CM11 or Using the TWRP build by Championswimmer, his ones support CM11 but i have no idea how to use it or install it ( i think recovery partition)
Envious_Data said:
http://forum.xda-developers.com/showpost.php?p=53220435&postcount=4
here is a recovery guide
i suggest sticking with CM11 or Using the TWRP build by Championswimmer, his ones support CM11 but i have no idea how to use it or install it ( i think recovery partition)
Click to expand...
Click to collapse
I have tried flashing an FTF (that I have used in the past) but it fails....
UPDATE: Got the FTF to Flash...
Puffin617 said:
I have tried flashing an FTF (that I have used in the past) but it fails....
Click to expand...
Click to collapse
1. install drivers
2. Download FTF for your device
3. Flash FTF
(flashmode=Volume down)
Envious_Data said:
1. install drivers
2. Download FTF for your device
3. Flash FTF
(flashmode=Volume down)
Click to expand...
Click to collapse
Do I need to UNLOCK again after FTF?
Puffin617 said:
Do I need to UNLOCK again after FTF?
Click to expand...
Click to collapse
No. Flashing a FTF restores the entire device to a factory state.
Bootloader isnt affected at all
Envious_Data said:
No. Flashing a FTF restores the entire device to a factory state.
Bootloader isnt affected at all
Click to expand...
Click to collapse
Thankx for the help
I'm back on CM with everything flashed correctly. Now I just want to get rid of this CWM and get TWRP back on...
Puffin617 said:
Thankx for the help
I'm back on CM with everything flashed correctly. Now I just want to get rid of this CWM and get TWRP back on...
Click to expand...
Click to collapse
As said there is only CWP and Philz
No twrp for xperias and cm11
Envious_Data said:
As said there is only CWP and Philz
No twrp for xperias and cm11
Click to expand...
Click to collapse
Flashing the latest monxDIFIED gives you TWRP 2.8...

[GUIDE]How to install CyanogenMod based ROMs (D618)

Well with the fact that i just 'Beginner' in android -developer world i spent two days (read and search) to just know what the right steps to have unofficial rom . So this is not thread from professional it's just what i understand so far . (SORRY FOR BAD ENGLISH)
It's some simple Steps :
1) First you need to root your Device to have fully adminstrator . (This make you can execute terminal order from you and the apps)
2)After you get root install flash tool To do Setup 4 . (Rasher or Flashify)
3)You must UNlocked you bootloader . (So the new rom can edit your boot process)
4)Install custom Recovery [CWM]or[PHILZ]or[TWRP]. (This make you can do zip install from external card)
5)Get your rom download and copy to your external card.
NOW YOUR READY
OK Now my guide is for LG G2 MINI (D618)
The custom rom is [ROM][5.1.1][D618/D620] Cyanogenmod 12.1 Stable
And my phone have OFFICIAL android 5.0.2 lollipop
1) ROOT : FOLLOW THIS GUIDE
http://forum.xda-developers.com/g2-mini/development/root-root-g2-mini-lollipop-t3123652
If it not success . do factory reset and start the root again but this time (don't setup superSU from store and don't restart your phone and IT's su Not Su) this should success .
2) DOWNLOAD THE FLASH TOOL FROM PLAY STORE AND KEEP IT
3) BOOTLOADER : FOLLOW THIS GUIDE (YOU MUST TAKE BACKUP FOR YOUR PHONE FIRST)
http://forum.xda-developers.com/g2-mini/development/bootloader-d620-d618-t3127819
4) CUSTOM RECOVERY : FOLLOW THIS GUIDE (CWM SUCCESS WITH ME) (JUST FLASH .IMG FILE WITH SETUP NUM (2))
http://forum.xda-developers.com/g2-mini/development/recovery-lg-g2-mini-d618-v10c-t2854493
5) DOWNLOAD THE FILE YOU NEED FROM HERE AND COPY TO EXTERNAL CARD AND FOLLOW Installation :
http://forum.xda-developers.com/g2-mini/development/rom-cyanogenmod-12-1-stable-t3175833
NOW IF THIS SETUP'S SUCCESS THE HARD PART IS OVER.
6) Now reboot into recovery mode (you will find this in Flash tool)
in recovery mode you need just two things (WIPE AND INSTALL)
7)CHOOSE "Wipe" CACHE, DATA and SYSTEM (THIS WILL DELETE YOUR PERSONAL DATA AND SETTING AND EVERY THING)
8)CHOOSE INSTALL ZIP FROM EXTERNAL CARD AND CHOOSE FIRST KK_BOOTSTACK_D618_1.1.ZIP THEN cm-12.1-20150828-UNOFFICIAL-g2m.ZIP
9) RECOMMENDED TO INSTALL GAPPS (tk_gapps-modular-pico(uni)-5.1.1-20150824-signed.ZIP)
10) NOW YOU HAVE DONE .. REBOOT YOUR PHONE AND IT WILL DO SOME INSTALL FOR ABOUT 10 MINUTE AND YOU WILL SEE SETTING SETUP ON THE SCREEN
11)F YOU HAVE unstable SIM signal JUST GO TO RECOVERY AND WIPE ONLY CACHE IT WILL BACK TO NORMAL.
THIS IS MY experience ON MY G2 D618 I DON'T KNOW ABOUT OTHER PHONE'S
THANK YOU XDA AND XDA-DEVELOPER'S FOR YOUR HARD WORK .
Thank you very very much for this great explanations!!!
Tried to flash custom recovery with Rashr after unlocking bootloader. Tried CWM, Philz and TWRP and always ended up with attached screen.
What do you think the mistake is? And what do you mean with setup Num 2? Do you mean kernel flash in Rashr?
Thank you!
snoK123 said:
Thank you very very much for this great explanations!!!
Tried to flash custom recovery with Rashr after unlocking bootloader. Tried CWM, Philz and TWRP and always ended up with attached screen.
What do you think the mistake is? And what do you mean with setup Num 2? Do you mean kernel flash in Rashr?
Thank you!
Click to expand...
Click to collapse
Make sure that Unlock bootloader process success i have this problem to and i Discovered that the unsuccess unlocking bootloader operation the Responsible for this error as i understand.
Flash custom recovery process deleting the original recovery but because of unsuccess unlocking bootloader Rasher Deleting original recovery but he cannot install the new custom recovery so what i do in this case .
1)Download official android lollipop from here (chose your country ) its KDZ File and flash with LG Flashtool 2014 Here
Now do the setup from the First setup .. and setup Num 2 i just mean Flash Custom Recovery File (Dont use TWRP Use CWM with Flashify .. Rasher didn't success with me ) Hope you make it
snoK123 said:
Thank you very very much for this great explanations!!!
Tried to flash custom recovery with Rashr after unlocking bootloader. Tried CWM, Philz and TWRP and always ended up with attached screen.
What do you think the mistake is? And what do you mean with setup Num 2? Do you mean kernel flash in Rashr?
Thank you!
Click to expand...
Click to collapse
this is the stock android recovery that means that you didn't or couldn't flash a custom recovery
make sur you extracted the zip file and flashed the recovery.img with flashify
Hmmm, did everything exactly like you've written until flashing recovery. Now I'm stuck with attached screen when entering recovery...
Any idea?
Thank you!
snoK123 said:
Hmmm, did everything exactly like you've written until flashing recovery. Now I'm stuck with attached screen when entering recovery...
Any idea?
Thank you!
Click to expand...
Click to collapse
this is the fastboot screen
the recovery you tried to flash is corrupt make sur the file isn't corrupted and the that is matching your device
i think your device is d620r and your trying to flash the one from the thread [RECOVERY][CWM][PHILZ][TWRP] G2 Mini D618
if you can boot into system reflash the matching recovery TWRP for your device if you can't connect your phone to pc
use fastboot to flash the recovery
http://forum.xda-developers.com/g2-mini/development/recovery-twrp-2-8-3-0-recovery-lg-d620-t2990196
Thank you very much for your reply, Tried to flash the linked TWRP with Rashr, same here... ...
snoK123 said:
Thank you very much for your reply, Tried to flash the linked TWRP with Rashr, same here... ...
Click to expand...
Click to collapse
don't know what's wrong !! if bootloader was locked you will have a security error on boot not the fastboot screen when enterig to recovery maybe you're doing the wrong combination to access recovery try with an application or with flashify or rasher to reboot to recovery
snoK123 said:
Thank you very much for your reply, Tried to flash the linked TWRP with Rashr, same here... ...
Click to expand...
Click to collapse
give us screen shot of (about software) in your phone
I All, i lost two days trying to flash the recovery with rashr ....
With flashify everything was ok!!!
So please try with it
At least on my case the problem was just the app rashr that does not work on my phone
xander33 said:
I All, i lost two days trying to flash the recovery with rashr ....
With flashify everything was ok!!!
So please try with it
At least on my case the problem was just the app rashr that does not work on my phone
Click to expand...
Click to collapse
The same happen with me so I put the general tool for all users and I mentions the successful tools that work with me
Sent from my LG-D618 using XDA Free mobile app

[Untested] Rooting LP 5.1 - Requires 5.0 As A Base

Rooting Method for Xperia Z Ultra Lollipop V5.1 .
What You Need :
5.1 .
Root & Recovery Pre-Installed .
Flashtool & PC .
MAKE A BACKUP FIRST​
How To :
As a Start, You Gonna have Lollipop 5.0 with Root & Recovery installed .
Move 5.1 to firmwares folder .
Download This SuperSu Flashable file and move it to SDCard & Internal Storage .
Open Flashtool .
Select The ROM .
Exclude Kernel ONLY .
Flash the ROM .
Boot the Phone and enter Recovery ASAP .
Install the ZIP File, if Flashtool didn't wipe Internal storage yet, then install it from Internal storage, otherwise from SD Card .
Power Off .
Open Flashtool .
Select 5.1 .
Exclude All expect the Kernel .
Un-tick Data / Cache and the third option too .
Flash .
Boot ! .
As a feedback from my friend, he said there was not problem with 5.0 kernel on 5.1 system for first boot ( recovery entering only ) .
Please feedback, and don't forget the backup !
is it 5.1 or 5.1.1?
The quick way to root any ROM, including the newly released 5.1.1 is, if you have an unlocked bootloader:
- Hotboot any custom kernel with a recovery (fastboot)
- Flash SuperSU
- Reboot
If you want CWM/TWRP:
- Flash NUT's Dual Recovery kernel through fastboot
- Reboot
You're now rooted, and you have recovery.
NOTE: If you have no idea how to use fastboot, then you can use QuickIMG. It lets you flash .IMGs very easily without needing to use any commands. Do however read the instructions provided before you use it.
It's also a good idea to learn how to get out of a sticky situation in case something goes wrong. If you want to be on the safe side when testing kernels, hotboot, or boot an IMG/kernel instead of flashing. Once you see that the kernel is indeed working, and you're not experiencing any bootloops or red LED blinking, then you can safely flash it to disk.
Note: Hotbooting means that the device will only boot the kernel once, so it doesn't really flash it to the device. Flashing a kernel writes it to the device, making it permanent until you replace it by flashing a different kernel yourself.
jaime4272 said:
is it 5.1 or 5.1.1?
Click to expand...
Click to collapse
5.1.X
Klaos3000 said:
The quick way to root any ROM, including the newly released 5.1.1 is, if you have an unlocked bootloader:
- Hotboot any custom kernel with a recovery (fastboot)
- Flash SuperSU
- Reboot
If you want CWM/TWRP:
- Flash NUT's Dual Recovery kernel through fastboot
- Reboot
You're now rooted, and you have recovery.
NOTE: If you have no idea how to use fastboot, then you can use QuickIMG. It lets you flash .IMGs very easily without needing to use any commands. Do however read the instructions provided before you use it.
It's also a good idea to learn how to get out of a sticky situation in case something goes wrong. If you want to be on the safe side when testing kernels, hotboot, or boot an IMG/kernel instead of flashing. Once you see that the kernel is indeed working, and you're not experiencing any bootloops or red LED blinking, then you can safely flash it to disk.
Note: Hotbooting means that the device will only boot the kernel once, so it doesn't really flash it to the device. Flashing a kernel writes it to the device, making it permanent until you replace it by flashing a different kernel yourself.
Click to expand...
Click to collapse
The way for locked bootloader not for unlocked .
Anyway, anyone tested it ?
How about using the prf (pre rooted firmware) tool for locked bootloader?
Sent from my C6833 using Tapatalk
ejhayanchorez said:
How about using the prf (pre rooted firmware) tool for locked bootloader?
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
I Didn't see a pre-rooted firmware, that's why i put this guide, if someone can do it and upload the firmware that's would be awesome .
hi there. I just want to say that after following your guide I could not get in to recovery after flashing the 5.1.1 ftf minus the kernel. when turning the phone on it goes straight to normal boot but it doesn't. it goes in to a boot loop. some how it removes dual recovery and can't flash SuperSU there for loosing root and yes I was rooted with dual recovery. could you explain with more details how to please because I did as you said and didn't work
jaime4272 said:
hi there. I just want to say that after following your guide I could not get in to recovery after flashing the 5.1.1 ftf minus the kernel. when turning the phone on it goes straight to normal boot but it doesn't. it goes in to a boot loop. some how it removes dual recovery and can't flash SuperSU there for loosing root and yes I was rooted with dual recovery. could you explain with more details how to please because I did as you said and didn't work
Click to expand...
Click to collapse
Follow this guide : http://forum.xda-developers.com/xpe...ck-rom-5-1-1-lollipop-xperia-z-ultra-t3206107
This guide isn't working on all devices, don't know why.
thanks i'll give it a try

Bootloop at startup logo due to XZrecovery getting trashed

Long story - Tried to apply the latest Marshmallow rooted package for D6503 on my 6502 that was already rooted with XZ dual recovery. It installed successfully, was rooted too...but I forgot to add the patch that would fix the radio not working. So I try to reboot to recovery...and that doesn't work anymore. I tried installing TWRP recovery from the manager app, but it wouldn't reboot. Then I ran the XZ recovery installer externally, and now my phone is ****ed. Stuck at an infinite boot loop.
At this stage the only thing I can access is flashtool and fastboot, and since my bootloader is locked I can't flash a recovery that way (nor do I want to permanently lose DRM keys/camera quality as I've heard happens with unlocking the bootloader). I have a memory card and I used the option to disable loading the recovery specified on the XZ thread by adding a 'donotload' file on the sd card.
Still no use - I get a Sony logo for about 5 seconds, the screen goes dark and back to the same. At this point probably my recovery is screwed up or non existent and a bad situation has gone worse with the bootloop.
What can I try now?
@KaiserSnorezay
XZDR is still not compatible with MM, that's why you got a bootloop...
Also you can't install the "regular" TWRP with twrp manager on a LB as there is no recovery partition... it won't work and probably will mess your phone in the process.
The solution is to flash any KK / LP .ftf with flashtool (i would wipe everything when flashing as i have backups of my data/apps) , root it with kingroot or any other method you like, install xzdr for KK/LP and finally reboot to recovery and install the latest MM prerooted rom from niaboc which already has root&recovery (not xzdr btw) included. Since you have D6502 don't forget to install the baseband patch after the rom again
http://forum.xda-developers.com/xperia-z2/development/rom-official-6-0-1-23-5-0-486-beta-t3336770
Just did it exactly this way yesterday on my friends d6503 (minus the d6502 patch obviously) had 0 troubles MM, root and recovery working perfectly.
Thanks, will try this today. Is wiping data required or can i get by by just flashing the older one?
ptmaniac said:
The solution is to flash any KK / LP .ftf with flashtool (i would wipe everything when flashing as i have backups of my data/apps) , root it with kingroot or any other method you like, install xzdr for KK/LP and finally reboot to recovery and install the latest MM prerooted rom from niaboc which already has root&recovery (not xzdr btw) included. Since you have D6502 don't forget to install the baseband patch after the rom again
Click to expand...
Click to collapse
I managed to flash and root 17.1.2.A.0.314, but once again I'm unable to get any damn recovery to work. Installed XZDR, after that TWRP, in both cases it refuses to boot into recovery mode. What am I missing?
KaiserSnorezay said:
I managed to flash and root 17.1.2.A.0.314, but once again I'm unable to get any damn recovery to work. Installed XZDR, after that TWRP, in both cases it refuses to boot into recovery mode. What am I missing?
Click to expand...
Click to collapse
Weird, after you have your phone rooted it should be simple to install xzdr... just enable usb debugging in the phone and make sure you have the adb drivers correctly installed in your pc.
Download the latest xzdr from nut's thread ( http://forum.xda-developers.com/showthread.php?t=2261606 ) unzip it and run install.bat . After a successful install the phone should reboot to twrp automatically and it's done.
Okay, I fixed it..using Flashfire! No idea why the recovery didn't work earlier, but now finally I'm on Marshmallow. Thanks for the help!
KaiserSnorezay said:
Okay, I fixed it..using ! No idea why the recovery didn't work earlier, but now finally I'm on Marshmallow. Thanks for the help!
Click to expand...
Click to collapse
hey bro, just read your post. Yesterday i got an update msg in my software update menu of my Xperia Z2 D6502. After i updated i went into bootloop. i have very important stuff in my phone. i updated earlier too all the updates that sony servers inform about. so then i thought to flash with the stock file. Although i didnt knew the firmware number , i just flashed with 5.1.1 , 1st with Customized IN & later with of US. Both of them didn't work as well. Please help me out. I'm not much aware about this root stuff & all. hope to get reply soon from you or anyone in this forum.
-also i don't know the exact firmware number-
dodge911 said:
hey bro, just read your post. Yesterday i got an update msg in my software update menu of my Xperia Z2 D6502. After i updated i went into bootloop. i have very important stuff in my phone. i updated earlier too all the updates that sony servers inform about. so then i thought to flash with the stock file. Although i didnt knew the firmware number , i just flashed with 5.1.1 , 1st with Customized IN & later with of US. Both of them didn't work as well. Please help me out. I'm not much aware about this root stuff & all. hope to get reply soon from you or anyone in this forum.
-also i don't know the exact firmware number-
Click to expand...
Click to collapse
Try what ptmaniac suggested - flash an older FTF that can be rooted (more recent ones can't), root it, install recovery and then flash the newest build.
You'll have to improve your Google-fu to find a suitable firmware and a root technique for it.
KaiserSnorezay said:
Try what ptmaniac suggested - flash an older FTF that can be rooted (more recent ones can't), root it, install recovery and then flash the newest build.
You'll have to improve your Google-fu to find a suitable firmware and a root technique for it.
Click to expand...
Click to collapse
okay. you mean flashing any old firmware ( which i did and still in bootloop ) & root it. Then installing recovery for the same firmware ?
with "recovery" will i be able to get back my whole data ?
KaiserSnorezay said:
Long story - Tried to apply the latest Marshmallow rooted package for D6503 on my 6502 that was already rooted with XZ dual recovery. It installed successfully, was rooted too...but I forgot to add the patch that would fix the radio not working. So I try to reboot to recovery...and that doesn't work anymore. I tried installing TWRP recovery from the manager app, but it wouldn't reboot. Then I ran the XZ recovery installer externally, and now my phone is ****ed. Stuck at an infinite boot loop.
At this stage the only thing I can access is flashtool and fastboot, and since my bootloader is locked I can't flash a recovery that way (nor do I want to permanently lose DRM keys/camera quality as I've heard happens with unlocking the bootloader). I have a memory card and I used the option to disable loading the recovery specified on the XZ thread by adding a 'donotload' file on the sd card.
Still no use - I get a Sony logo for about 5 seconds, the screen goes dark and back to the same. At this point probably my recovery is screwed up or non existent and a bad situation has gone worse with the bootloop.
What can I try now?
Click to expand...
Click to collapse
hey i am having same problem with my xperia Z2 , it stucked in bootloop ,i have already tried to flash new firmware from xperifirm using flash tool,but i think my usb debugging is off, what can i do ,i cant start my phone so there are no chances for turning USB debugging on,what can i do, any solution,, just want my phone back,it will be okay if I loose my all data..please
DedSec_35 said:
hey i am having same problem with my xperia Z2 , it stucked in bootloop ,i have already tried to flash new firmware from xperifirm using flash tool,but i think my usb debugging is off, what can i do ,i cant start my phone so there are no chances for turning USB debugging on,what can i do, any solution,, just want my phone back,it will be okay if I loose my all data..please
Click to expand...
Click to collapse
Sorry, I ditched my Z2 for a Oneplus 3 in August 2016. Learnt my lesson, only going to use phones with easily unlockable bootloaders.

Help me unbrick

Im the most stupid person alive because
I didn't unlock my bootloader
I installed xzrecovery witch is a app that installs twrp
Then in twrp i wiped every thing
Then I tried to install a rom witch didn't work
Then i trend the phone off when i tried to do so twrp said your device is not rooted do you want to install super su i said yes the phone is now stuck on sony logo
Pliz help
aliamiri70007 said:
Im the most stupid person alive because
I didn't unlock my bootloader
I installed xzrecovery witch is a app that installs twrp
Then in twrp i wiped every thing
Then I tried to install a rom witch didn't work
Then i trend the phone off when i tried to do so twrp said your device is not rooted do you want to install super su i said yes the phone is now stuck on sony logo
Pliz help
Click to expand...
Click to collapse
You wiped everything and now there is no rom installed so its not going past the sony logo. You have two options.
1. Unlock bootloader if you want to run a custom rom.
2. Flash stock rom to go back to stock.
and how to flash stock rom , you need to have the flashtool , put your phone in donwloadmode ( volumne down + plug in the usb cable ) and then flash the stock rom of sony ( you can find the method on how to do it on google ) its simple and then you decide out of 2 options above from last post
Since your bootloader isn't unlocked your can use Sony Companion Software to repair your phone. When you click update there is a repair option. Select repair and hook up the phone in flashmode. Make sure your ZU is atleast 50% charged.
thanks for replying everyone i tried the flashtool stock rom installation and i got boot loop now i tried two different ftf files but they both result in boot loop what am i doing wrong?
aliamiri70007 said:
thanks for replying everyone i tried the flashtool stock rom installation and i got boot loop now i tried two different ftf files but they both result in boot loop what am i doing wrong?
Click to expand...
Click to collapse
can you flash the stock rom again and copy paste the log here in a code quote like this one:
Code:
write here
And what is your model? C6833 etc..
What stock rom did you download?
Which drivers did you use?
And which version of flashtool did you use?
And lastly what settings did you use when flashing the stock rom? All options included so ALL partitions being flashed. And none excluded.
Screenshots is always good help .
for locked bootloader http://support.sonymobile.com/fr/xperia-companion/
for unlocked bootloader https://developer.sonymobile.com/open-devices/flash-tool/
Thanks I didn't check the wipe section wich causes bootloader thanks again to everyone who helped
aliamiri70007 said:
Thanks I didn't check the wipe section wich causes bootloader thanks again to everyone who helped
Click to expand...
Click to collapse
You're welcome

Categories

Resources