{Pro}[DEV][KitKat 4.4.4][CM11.0] iyokanLX - Custom LegacyXperia CM11 - Sony Ericsson Xperia Neo, Pro

Hey XDA!
I have been making custom LX CM11 builds for my iyokan. I thought I'd release them here.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Credits to mikeioannina, CyanogenMod Team and others who made LX possible. I am just making minor changes to their hard work.
I will try to keep up with latest LX and CM changes but their are no guarantees. This work is provides as is.
WARNING: This ROM uses a modified internal memory layout. You can BRICK your device.
Our /system partition is originally 400MB but this space is not enough for a fluid kitkat experience and a full installation with proper google apps.
Our /cache partition is also too small to fit art-cache when we enable the ART runtime. We originally had 100MB /cache but art-cache needs ~150mb of free space.
I have repartitioned the internal memory layout, giving:
353.5mb in /system
570mb in /data
4mb in /cache
If you want to use this ROM you will always have to use the included kernel or use a kernel that includes the layout changes. Bug reports with non-standard kernels will be ignored.
You will have to wipe the device and make a clean install.
You cannot restore nandroid backups from previous android versions or restore nandroid backups from this ROM to other ROMs that don't use the new partition layout since you risk corrupting the data.
I suggest to use Titanium Backup, Helium or any other similar app to backup your data if you really need to.
Requirements:
* Have the stock ICS 4.1.B.0.587 full ftf flashed (doesn't matter if you have flashed it in the past or if you flash it before installing cm11.0, it will work both ways)
WARNING: If you are coming from mike's LX CM11, FLASH STOCK FTF first and follow the instructions below.
Steps required for correct installation (order is important):
1: Flash boot.img in fastboot & reboot into recovery
1.1 (optional): If the device is not booting, reboot to bootloader again and run:
fastboot erase system
fastboot erase userdata
2: Enter recovery, go to mounts and storage
3: Format /system, then /data and then /cache (Important step!)
4: Flash update zip
5: Flash gapps (recommended package is the one provided in the link below)
Steps 1.1, 2 & 3 are not needed when you install new builds of iyokanLX CM11 on top of older iyokanLX CM11 builds in the future.
If you want to return to a ROM that doesn't use the new partition layout, you need to follow the above steps again (only replace boot.img & update zip with the ones you want to use).
GAPPS
Google Apps Minimal Edition by jajb
Get the minimal 240DPI version.
Downlaods
Links are provided with each build in a new reply/post. Please check the last post.
XDA:DevDB Information
iyokanLX, ROM for the Sony Ericsson Xperia Pro
Contributors
pteek, mikeioannina, CM Team and others
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Testing
Created 2014-10-04
Last Updated 2014-10-04

Reserved.

Reserved again.

First release.
TEST BUILD 20141014 (CHANGES AFTER LX 20141006)
Latest cm11.0 changes
Included extra firmware to fix touchscreen on some mango devices
Backported f2fs from kernel 3.17
Backported ext4 bugfixes from kernel 3.4.104
Backported zram from kernel 3.17
Backported lz4 from kernel 3.17
Backported slub from kernel 3.4.104
Use lz4 compression for zram
Removed deprecated pmem code from kgsl, rotator, mdp & mogami board
Change MTD partition layout (experimental). More space on /data 570MB.
Download links:
WARNING: If you are coming from mike's LX CM11, FLASH STOCK FTF first and refer to instructions in post #1.
https://www.androidfilehost.com/?fid=95747613655046171
MD5:https://www.androidfilehost.com/?fid=95747613655046172
GAPPS:
Check post #1.

i cant Find the detail of whats Custom in this Rom apart from being CM 11 ................ can u give Give more detail about the custom stuff that u have added or things u have changed from default Cm 11 . Thanks

shareupload said:
i cant Find the detail of whats Custom in this Rom apart from being CM 11 ................ can u give Give more detail about the custom stuff that u have added or things u have changed from default Cm 11 . Thanks
Click to expand...
Click to collapse
Change MTD partition layout (experimental). More space on /data 570MB.
Upload coming in a few hours.

thanks alot. what about wakelock issue on cm11 cyanogen roms?
Did you fix that? because whitout fixing that problem,the roms are useless!
edit: cputuner can solve this.

thanks alot

sahandxda said:
edit: cputuner can solve this.
Click to expand...
Click to collapse
How exactly?

pteek said:
hey xda!
I have been making custom lx cm11 builds for my iyokan. I thought i'd release them here.
Code:
#include <std_disclaimer.h>
/*
* your warranty is now void.
*
* i am not responsible for bricked devices, dead sd cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this rom
* before flashing it! You are choosing to make these modifications, and if
* you point the finger at me for messing up your device, i will laugh at you.
*/
credits to mikeioannina, cyanogenmod team and others who made lx possible. I am just making minor changes to their hard work.
I will try to keep up with latest lx and cm changes but their are no guarantees. This work is provides as is.
warning: This rom uses a modified internal memory layout. You can brick your device.
our /system partition is originally 400mb but this space is not enough for a fluid kitkat experience and a full installation with proper google apps.
Our /cache partition is also too small to fit art-cache when we enable the art runtime. We originally had 100mb /cache but art-cache needs ~150mb of free space.
I have repartitioned the internal memory layout, giving:
353.5mb in /system
570mb in /data
4mb in /cache
if you want to use this rom you will always have to use the included kernel or use a kernel that includes the layout changes. Bug reports with non-standard kernels will be ignored.
You will have to wipe the device and make a clean install.
You cannot restore nandroid backups from previous android versions or restore nandroid backups from this rom to other roms that don't use the new partition layout since you risk corrupting the data.
I suggest to use titanium backup, helium or any other similar app to backup your data if you really need to.
requirements:
* have the stock ics 4.1.b.0.587 full ftf flashed (doesn't matter if you have flashed it in the past or if you flash it before installing cm11.0, it will work both ways)
warning: If you are coming from mike's lx cm11, flash stock ftf first and follow the instructions below.
steps required for correct installation (order is important):
1: Flash boot.img in fastboot & reboot into recovery
1.1 (optional): If the device is not booting, reboot to bootloader again and run:
Fastboot erase system
fastboot erase userdata
2: Enter recovery, go to mounts and storage
3: Format /system, then /data and then /cache (important step!)
4: Flash update zip
5: Flash gapps (recommended package is the one provided in the link below)
steps 1.1, 2 & 3 are not needed when you install new builds of iyokanlx cm11 on top of older iyokanlx cm11 builds in the future.
If you want to return to a rom that doesn't use the new partition layout, you need to follow the above steps again (only replace boot.img & update zip with the ones you want to use).
gapps
google apps minimal edition by jajb
get the minimal 240dpi version.
downlaods
links are provided with each build in a new reply/post. Please check the last post.
xda:devdb information
iyokanlx, rom for the sony ericsson xperia pro
contributors
pteek, mikeioannina, cm team and others
rom os version: 4.4.x kitkat
rom kernel: linux 3.4.x
based on: cyanogenmod
version information
status: testing
created 2014-10-04
last updated 2014-10-04
Click to expand...
Click to collapse
ray ray ray xperia ray please

pteek said:
How exactly?
Click to expand...
Click to collapse
Just install CPU Tuner app and set a low fixed frequence for screen off mode ,it's done!
download and see my settings in app: (screenshots.zip)
http://s5.picofile.com/file/8151731334/cputuner_shot.rar.html

sahandxda said:
Just install CPU Tuner app and set a low fixed frequence for screen off mode ,it's done!
download and see my settings in app: (screenshots.zip)
http://s5.picofile.com/file/8151731334/cputuner_shot.rar.html
Click to expand...
Click to collapse
Nice Idea, thanks!
@vladht
I can help you with compiling it. I will only do iyokan tho, sorry.

Second release.
Second release.
TEST BUILD 20141128
Latest cm11.0 changes
Included extra firmware to fix touchscreen on some mango devices
Backported f2fs from kernel 3.17
Backported ext4 bugfixes from kernel 3.4.104
Backported zram from kernel 3.17
Backported lz4 from kernel 3.17
Backported slub from kernel 3.4.104
Use lz4 compression for zram
Removed deprecated pmem code from kgsl, rotator, mdp & mogami board
Improved lowmemorykiller values for low-ram devices from CAF
Merge branch 'kk_2.7_rb1.43' from CAF kernel
Security fixes for CVE-2014-7825 & CVE-2014-7826
Removed default live wallpapers (not recommended for low-ram devices)
Initial bcmdhd configuration for zeus Wi-Fi (MAC address not implemented yet)
Initial bluetooth configuration for zeus (MAC address not implemented yet)
Testing fix for landscape lockscreen layout
Change MTD partition layout (experimental). More space on /data 560MB.
Download links:
WARNING: If you are coming from mike's LX CM11, FLASH STOCK FTF first and refer to instructions in post #1.
WARNING: You cannot install this release over the previous one. Gappses size increased so I had to change the partition layout. Do a clean install.
https://www.androidfilehost.com/?fid=95832962473394270
MD5:https://www.androidfilehost.com/?fid=95832962473394271
GAPPS:
Grab the pico version.
http://forum.xda-developers.com/showthread.php?t=2397942
Add a file named "gapps-config.txt" in the same folder as the gapps zip on your sdcard. Put "smallbuffer" in the first line and save the file.

You can manually restore the /data partition from a CWM backup of the older release. It works for me, YMMV.

Exellent Rom. Big Thanks.
Only one non importent bag. Daydream, nightstand wan't activate by power or dock connect.

hi,
link from second release down. does anyone could upload it again for Xperia pro, mk16i, iyokan?
thanks & kind regards
robert

Related

{Pro}[DEV][KitKat 4.4.4][CM11.0] LegacyXperia

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[COLOR="Purple"]#include <std_disclaimer.h>[/COLOR]
[COLOR="Navy"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/COLOR]
This is an unofficial build of CM11.0.
This is an attempt to stay close to official cm11.0 and not make crazy hacks to make things working.
This is a pure CM build, only contains official CM features. I will not add any other external feature/app/etc.
For an up-to date working/not working list, bug tracker, useful guides & FAQ, visit our website:
http://legacyxperia.github.io
WARNING: This ROM uses a modified internal memory layout.
Our /system partition is originally 400MB but this space is not enough for a fluid kitkat experience and a full installation with proper google apps.
Our /cache partition is also too small to fit art-cache when we enable the ART runtime. We originally had 100MB /cache but art-cache needs ~150mb of free space.
I have repartitioned the internal memory layout, giving:
450mb in /system
469,5mb in /data
8mb in /cache
If you want to use this ROM you will always have to use the included kernel or use a kernel that includes the layour changes. Bug reports with non-standard kernels will be ignored.
You will have to wipe the device and make a clean install.
You cannot restore nandroid backups from previous android versions or restore nandroid backups from this ROM to other ROMs that don't use the new partition layout since you risk corrupting the data.
I suggest to use Titanium Backup, Helium or any other similar app to backup your data if you really need to.
Requirements:
* Have the stock ICS 4.1.B.0.587 full ftf flashed (doesn't matter if you have flashed it in the past or if you flash it before installing cm11.0, it will work both ways)
* LT15i (Arc) users need to flash LT18i (Arc S) ftf
* MT15i (Neo) users need to flash MT11i (Neo V) ftf
Steps required for correct installation (order is important):
1: Flash boot.img in fastboot & reboot into recovery
1.1 (optional): If the device is not booting, reboot to bootloader again and run:
fastboot erase system
fastboot erase userdata
2: Enter recovery, go to mounts and storage
3: Format /system, then /data and then /cache (Important step!)
4: Flash update zip
5: Flash gapps (recommended package is the one provided in the link below)
Steps 1.1, 2 & 3 are not needed when you install new cm11 nightlies on top of older cm11 builds in the future
If you want to return to a ROM that doesn't use the new partition layout, you need to follow the above steps again (only replace boot.img & update zip with the ones you want to use).
How to build:
[GUIDE][DEV] How I build my own CM11.0 test builds
Changelog:
Release/nightly changes
Working/Non-working list
CM11.0 with new kernel 3.4 status
Downloads:
https://s.basketbuild.com/devs/LegacyXperia
PLEASE DON'T MIRROR OUR UPLOADS
Recommended Google Apps:
Google Apps Minimal Edition
NOTE:
Following xda's rule #12 spirit: If you are developing something that is based on my work, you MUST first seek my permission, you must add my name in the credits and you must add links pointing to my original thread and to my github sources.
Breaking this rule will lead me to report the thread to the moderators.
NEW!!! BUG Tracker
If you want to help fixing those bugs, please report the bugs in the bug tracker. Thanks!
Logs are needed (logcat/dmesg/last_kmsg), not just "got FC" or "+1" useless replies.
XDA:DevDB Information
LegacyXperia, ROM for the Sony Ericsson Xperia Neo
Contributors
mikeioannina, nobodyAtall, pcfighter, Blefish
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Latest version of official ICS firmware: 4.1.B.0.587 or the latest supported baseband: 8x55A-AAABQOAZM-203028G-77
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: nightly 20140702
Beta Release Date: 2014-07-02
Created 2014-05-31
Last Updated 2014-09-06
Reserved
New build coming
## Nightly build 20140531 - cm-11.0
* Latest cm11.0 changes
* Fixed SystemUI crashes, lockups & soft reboots
* Updated kitkat adreno GPU libs from Galaxy S3 (d2lte) (Tag AU_LINUX_ANDROID_KK_2.7_RB1.04.04.00.007.018)
* Updated BFQ IO scheduler to v7r3
* Fixed several kernel security vulnerabilities (CVE-2014-0196, CVE-2014-3145, CVE-2014-3144, CVE-2014-3122, CVE-2014-2851, CVE-2014-2523)
* Bumped mic & speaker volumes to nAa kernel level
* Make ION MM heap use CMA: makes ~26MB of RAM available to userspace when not used by video encoder/decoder
* Make PMEM_ADSP heap use fmem: makes ~47MB on devices with 8MP camera or ~31MB on devices with 5MP camera available to userspace when not used by camcorder
* Rebased kernel on top of latest CAF kk_2.7-stable changes
* Testing fix for media storage crashes after hot reboot
* Updated KSM for better power consumption
Builds will roll alphabetically for all devices until tomorrow
New build coming
## Nightly build 20140603 - cm-11.0
* Latest cm11.0 changes
* Kernel:
* Increased pmem_adsp size by 0.2MB to fix booting after the fmem changes
* Testing changes for Bluetooth battery drain
* Fixed null pointer exception which lead to kernel panic
* Various SELinux bugfixes
Builds will roll alphabetically for all devices until tomorrow
Slight Delay
There will unfortunately be a slight delay in the delivery of most builds. I had an error in the script which deleted the build folder (out) before the ROMs were extracted.
As a result building of the following devices will be restarted at the end of the current build run (current run should be complete by 8AM GMT):
Coconut
Haida
Hallon
Iyokan
Mango
Satsuma
Booting issue report
Everything works great but i still have the "boot issue" with the new kernel(Nightly build 20140603 - cm-11.0)...after reboot dose not boot on system always black screen i can boot normally only when i boot on cwm--->mount system--->reboot system now
i dont know if xposed have something to do with it i have it installed/enable trough.
Regards
John !
giannhs_n said:
Everything works great but i still have the "boot issue" with the new kernel(Nightly build 20140603 - cm-11.0)...after reboot dose not boot on system always black screen i can boot normally only when i boot on cwm--->mount system--->reboot system now
i dont know if xposed have something to do with it i have it installed/enable trough.
Regards
John !
Click to expand...
Click to collapse
It's a known bug.
Just leave it on the blank screen and it will boot after a few minutes
New build coming
## Nightly build 20140611 - cm-11.0
* Latest cm11.0 changes
* Updated to Android 4.4.3
* Fixed futex local privilege escalation (CVE-2014-3153)
* Fixed a bunch of OpenSSL vulnerabilities (http://www.openssl.org/news/secadv_20140605.txt)
* Fixed offline charing animation
* Fixed Privagy Guard settings for apps moved to SD reset to default on reboot
* Updated BFQ IO scheduler to v7r4
* Enabled deadline IO scheduler
* Various audio HAL updates
* Fixed FFMPEG plugin not being included in previous builds
* Ability to use Android device as USB keyboard/mouse (requires https://play.google.com/store/apps/details?id=remote.hid.keyboard.client)
-- Steps:
* Start ADB Debugging
* Start app
* Connect device to system via USB cable
Builds will roll alphabetically until tomorrow
Hi Mike, I just wanna correct the Banks Gapps link from first page.
For the 4.4.3 here the link :
Goo.im or AFH
Best regards :fingers-crossed:
Due to Opened Radio from Sony - do You plan to fix radio in CM ?
7OH said:
Due to Opened Radio from Sony - do You plan to fix radio in CM ?
Click to expand...
Click to collapse
This has been answered 10000 times: No
This source from sony is useless after android 4.2
how about putting a WONT FIX category on the change log so that people will know about what features wont be fix ( ANT, HDMI, Radio, etc )
## Nightly build 20140619 - cm-11.0
* Latest cm11.0 changes
* Reverted PMEM_ADSP fmem changes - fixed camcorder
* Disabled qcom AAC encoder - fixed camcorder
* Fixed Trebuchet crashes
* Enabled true 720p camcorder @30fps
* Enabled stereo camcorder recording
* Testing:
* Updated BT serial driver
* Apply IO scheduler to all partitions
* Alternative way to solve the crashes after hot reboot
Builds will roll alphabetically until tomorrow
New build coming
## Nightly build 20140702 - cm-11.0
* Latest cm11.0 changes
* Updated to Android 4.4.4
* Re-enabled high brightness mode in Torch (all except urushi)
* Fixed ADB sideload
* Make PMEM_ADSP heap use CMA: makes ~47MB on devices with 8MP camera or ~31MB on devices with 5MP camera available to userspace when not used by camcorder
* Updated BFQ from BFQ-v7r4 to BFQ-v7r5
* Updated interactive CPU governor
* Various CMA bugfixes
* Various kernel bug & security fixes
* Readded boostpulse interface to ondemand
Builds will roll alphabetically for all devices until tomorrow
mikeioannina said:
## Nightly build 20140702 - cm-11.0
* Latest cm11.0 changes
* Updated to Android 4.4.4
* Re-enabled high brightness mode in Torch (all except urushi)
* Fixed ADB sideload
* Make PMEM_ADSP heap use CMA: makes ~47MB on devices with 8MP camera or ~31MB on devices with 5MP camera available to userspace when not used by camcorder
* Updated BFQ from BFQ-v7r4 to BFQ-v7r5
* Updated interactive CPU governor
* Various CMA bugfixes
* Various kernel bug & security fixes
* Readded boostpulse interface to ondemand
Builds will roll alphabetically for all devices until tomorrow
Click to expand...
Click to collapse
not rolled for pro yet
edit my bad (bad eyes)
mikeioannina said:
## Nightly build 20140702 - cm-11.0
* Latest cm11.0 changes
* Updated to Android 4.4.4
* Re-enabled high brightness mode in Torch (all except urushi)
* Fixed ADB sideload
* Make PMEM_ADSP heap use CMA: makes ~47MB on devices with 8MP camera or ~31MB on devices with 5MP camera available to userspace when not used by camcorder
* Updated BFQ from BFQ-v7r4 to BFQ-v7r5
* Updated interactive CPU governor
* Various CMA bugfixes
* Various kernel bug & security fixes
* Readded boostpulse interface to ondemand
Builds will roll alphabetically for all devices until tomorrow
Click to expand...
Click to collapse
Big thanks for doing this for Xperia Pro. The rom works great. After couple days of use I haven't noticed any bugs. The wifi has stopped working couple times (connected but not able to use internet with apps), but always resumed after putting it off and back on. And the cause might also be my router. Batterylife is good enough and user experience is smooth. Coming from Ultimate HD, the UI feels much more responsive.
Again, thank you! I feel that this rom brought my Pro back to life.
New builds up
Nightly build 20140718 - cm-11.0
Latest cm11.0 changes
Updated power HAL & fixed frequencies
Updated partition mount procedure (might reduce long boot times)
Removed some ffmpeg codecs to use google's equivalents
Added 5MB of RAM to SF heap (reduces free RAM by 5MB)
Increased MM CMA heap to 48MB to fix potential issues with video encoder/decoder
Disabled KSM in kernel since it's incompatible with the latest CMA changes
Fixed smartassV2 boostpulse interface (it never worked)
Fixed Trebuchet blurry/oversized icons after 4.4.3 merge
Enabled swipe feature in CWM
Disabled broken in-call noise suppression
All builds are up already, go get it.
Report
Langes said:
Nightly build 20140718 - cm-11.0
Latest cm11.0 changes...
All builds are up already, go get it.
Click to expand...
Click to collapse
Hi Mike et al !
I just flashed this ROM coming from CM10.
Awesome!
Thank you for the hard work you all put into these legacy devices.
I'm using it without SIM card just for the fun of flashing new xperiances .
No problems. Better than CM10 (last nightly i used so far).
As for the battery drain mentioned somewhere here:
Edit as of 2014-07-31:
Text deleted. Found the answer.
Just turned phone off, charged to full, restarted, pulled ac plug.
Everything fine, no wakelock. Battery life good.
Just as an idea....
Deleted, obsolete.
## Nightly build 20140813 - cm-11.0
* Latest cm11.0 changes
* Updates to WiFi & BT from omapzoom d-kitkat-mr2.1-release branch
* Fixed support for screen casting (eg. Chromecast) - untested
* Fixed default IO scheduler not being set to row after clean install
* Experimental pmem->ion wrapper
* Fixed volume down recovery key detection on zeus/phoenix
Builds will roll alphabetically for all devices until tomorrow

[Kernel][Sony5.x]Zombie[10.04.16]

Zombie is a Kernel which extends the Xperia Z Ultra's capabilities.
It is aimed at including only useful and strictly tested features, enhancements and optimisations,
it will only receive useful CAF enhancements.
Important: I do not accept Bug reports when you are running a modified Rom or using Xposed!
Sidenote:
No Recovery will be added due to Sony's new bootloader which allows direct Recovery booting without hacking Ramdisk!
Features:
* Compiled with Google's AOSP GCC 4.8 and Size Optimisations (-Os) (for maximum stability)
* Sony RIC is disabled (hijacking is not possible anymore on newer fw's)
* Optional dt2w with adjustable haptical feedback
* Sweep2Sleep (works in Navigation and Status Bar)
* Automated current scaling for wled backlight (to fix ****ty standard brightness mapping)
* Optional Conservative devfreq GPU-Governor
* Togari is usable as Mouse/Keyboard for PC
* Faux' Sound Control 3.x (controllable via e.g. Fauxsound)
* KCAL Color Driver (Full RGB /Sat/Cont/Inv/Val/Greyscale Control)
* Tuned thermal configuration (less throtteling)
Additional changes of b9 upwards:
* Tightened security (e.g. patched rowhammer bug)
* Latest CAF fixes from the current branch and the most important ones from the latest CAF branch
* Speedbin/PVS exported to sys/kernel/debug/msm8974_cpuinfo
* Ext4 fs patched to latest 3.4.x (performance increase)
Downloads:
Legacy Build: Zombie-b8
Latest Build: Zombie-b9
Installation:
* Flash Kernel Package via Recovery (Not only the Boot Image via Fastboot: there are important scripts which need to be applied to ensure the Kernel works as intended).
Source:
Zombie Lollipop Kernel-Source @ Github
XDA:DevDB Information
Advanced Stock Kernel, Kernel for the Sony Xperia Z Ultra
Contributors
Tommy-Geenexus
Kernel Special Features:
Version Information
Status: Stable
Created 2015-05-28
Last Updated 2016-04-10
Reserved
Does it do anything for performance. I'm confused about the boot loader part. Can I still flash dual recovery with twrp manager if I use this kernel? Stable?
RealityFails said:
Does it do anything for performance. I'm confused about the boot loader part. Can I still flash dual recovery with twrp manager if I use this kernel? Stable?
Click to expand...
Click to collapse
Sony released a new bootloader, we can fastboot TWRP now. No need for other hacks (dualrecovery, etc..).
If you're on the old bootloader, i don't know if it works, i've never used stuff like dualrecovery.
Tommy-Geenexus said:
Sony released a new bootloader, we can fastboot TWRP now. No need for other hacks (dualrecovery, etc..).
If you're on the old bootloader, i don't know if it works, i've never used stuff like dualrecovery.
Click to expand...
Click to collapse
I'm not sure about old bootloader, I unlocked my bootloader on 4.4.4 with flash tool. Now I'm on stock 5.0.2
locked bootloader?
Tommy-Geenexus said:
Hi all,
The following Kernel builds are only suitable for Sony 5.02/Sony 5.02-based roms.
Sidenote:
This Kernel is aimed to give maximum security. It has some additional restrictions enabled to protect various parts.
RIC is left enabled to ensure maximum security, only change is that /system is writable, /data and /cache are still protected with flags.
I won't add many custom features, as Wifi breaks easily, i'll keep this as a security-enhanced Stock-based Kernel.
No Recovery will be added due to Sony's new bootloader!
Features:
* Compiled with GCC 4.8 AOSP Toolchain
* Sony RIC-Module enabled (but /system is r/w mountable)
* Sound Control 3.x
* Many security patches - this Kernel is aimed at maximum security
Todo:
* Add CPU-Boost (eventually)
* KCAL Color Driver
Downloads:
https://www.androidfilehost.com/?fid=23991606952611162
Installation:
Code:
fastboot flash boot boot.img
fastboot reboot
Source:
https://github.com/Tommy-Geenexus/android_kernel_sony_msm8974_togari_5.0.2/commits/master
XDA:DevDB Information
Advanced Stock Kernel, Kernel for the Sony Xperia Z Ultra
Contributors
Tommy-Geenexus
Kernel Special Features:
Version Information
Status: Stable
Created 2015-05-28
Last Updated 2015-05-28
Click to expand...
Click to collapse
i have locked bootloader on my c6833 ,can i flash this kernel? i dont want to unlock my bootloader yet.
Superb Azam said:
Hi all,
The following Kernel builds are only suitable for Sony 5.02/Sony 5.02-based roms.
Sidenote:
This Kernel is aimed to give maximum security. It has some additional restrictions enabled to protect various parts.
RIC is left enabled to ensure maximum security, only change is that /system is writable, /data and /cache are still protected with flags.
I won't add many custom features, as Wifi breaks easily, i'll keep this as a security-enhanced Stock-based Kernel.
No Recovery will be added due to Sony's new bootloader!
Features:
* Compiled with GCC 4.8 AOSP Toolchain
* Sony RIC-Module enabled (but /system is r/w mountable)
* Sound Control 3.x
* Many security patches - this Kernel is aimed at maximum security
Todo:
* Add CPU-Boost (eventually)
* KCAL Color Driver
Downloads:
https://www.androidfilehost.com/?fid=23991606952611162
Installation:
i have locked bootloader on my c6833 ,can i flash this kernel? i dont want to unlock my bootloader yet.
Click to expand...
Click to collapse
Nope, needs unlock.
Sound Control working perfect
Thanks
New build up.
Changelog:
* Added KCAL
* Removed eMMC Speed Cap
* Security Enhancements and physical memory protection
* Shrinked boot Image size by ~5Mb
Hey just a quick question about the sound control, can I use a kernel control app to increase/decrease gain???
zubeedubs said:
Hey just a quick question about the sound control, can I use a kernel control app to increase/decrease gain???
Click to expand...
Click to collapse
Yes.
Tommy-Geenexus said:
New build up.
Changelog:
* Added KCAL
* Removed eMMC Speed Cap
* Security Enhancements and physical memory protection
* Shrinked boot Image size by ~5Mb
Click to expand...
Click to collapse
Can you add these things please:
Kexec hardboot patch
DT2W
Intellidemand governor
I would be glad when you add these things
Thanks for your Hard work
V1 working good. No Problem.
Sound Control working good.
In the New build:
Kcal mod working good.
But my devices C6833 Crashed 4 Times in One Day.
Florian551 said:
Thanks for your Hard work
V1 working good. No Problem.
Sound Control working good.
In the New build:
Kcal mod working good.
But my devices C6833 Crashed 4 Times in One Day.
Click to expand...
Click to collapse
Alright, Kmesg please.
the-cortana-project said:
Can you add these things please:
Kexec hardboot patch
DT2W
Intellidemand governor
I would be glad when you add these things
Click to expand...
Click to collapse
Sorry, but none of these things will be added.
Tommy-Geenexus said:
Hi all,
The following Kernel builds are only suitable for Sony 5.02/Sony 5.02-based roms.
Sidenote:
This Kernel is aimed to give maximum security. It has some additional restrictions enabled to protect various parts.
RIC is left enabled to ensure maximum security, only change is that /system is writable, /data and /cache are still protected with flags.
I won't add many custom features, as Wifi breaks easily, i'll keep this as a security-enhanced Stock-based Kernel.
No Recovery will be added due to Sony's new bootloader which allows direct Recovery booting without hacking Ramdisk!
Features:
* Compiled with GCC 4.8 AOSP Toolchain
* Sony RIC-Module enabled (but /system is r/w mountable)
* Sound Control 3.x
* KCAL Color Driver
* Many security patches - this Kernel is aimed at maximum security
Todo:
* Add CPU-Boost (eventually)
* APQ-Hotplug
Downloads:
https://www.androidfilehost.com/?fid=23991606952613175
Installation:
Code:
fastboot flash boot boot-b2.img
fastboot reboot
Source:
https://github.com/Tommy-Geenexus/android_kernel_sony_msm8974_togari_5.0.2/commits/master
XDA:DevDB Information
Advanced Stock Kernel, Kernel for the Sony Xperia Z Ultra
Contributors
Tommy-Geenexus
Kernel Special Features:
Version Information
Status: Stable
Created 2015-05-28
Last Updated 2015-06-01
Click to expand...
Click to collapse
how to install sony new bootloader ?
and after installation my C6833 will be wipe??
Nimadroid said:
how to install sony new bootloader ?
and after installation my C6833 will be wipe??
Click to expand...
Click to collapse
I use Emma to install and no data will be wiped
destinygs said:
I use Emma to install and no data will be wiped
Click to expand...
Click to collapse
Tnx man a lot
And other question Emma dont send me verify email and I cant use that
C6802 GPE & 14.5.A.0.242 & unlocked bootloader.
Tommy-Geenexus said:
Hi all,
The following Kernel builds are only suitable for Sony 5.02/Sony 5.02-based roms.
Sidenote:
No Recovery will be added due to Sony's new bootloader which allows direct Recovery booting without hacking Ramdisk!
Created 2015-05-28
Last Updated 2015-06-01
Click to expand...
Click to collapse
This tutorial suit mine?
My XZU model is C6802 GPE with build number 14.5.A.0.242 and unlocked bootloader.
Thanks
My device is c6802......so i can't use the new bootloader because emma doesn't support it?????
Also about the kernel......can u plz make the selinux permissive by default????//

[STOCK-AOSP][UPDATED]Concept-ify - the AOSP-ed MM ROM

Concept-ify - the one and only improved stock Android Marshmallow ROM
Started by @Gray47Maxx and @kamilkos16.
Turned into something beautiful by @Pachops427 and @trpsl​Hello everyone!
It's time for Concept Team to present our new and improved stock MM ROM:
Concept-ify!​#include
* If you have any modifications - it probably will not work. I've warned you.
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this ROM.
* Because only you are choosing to make these modifications.
Features:
AOSP UI and apps
Custom rootless kernel (SkyMelon 9), much faster and more stable than stock
Massive cleanup of bloatware (Removed 170+ apps), so plenty of space for your own apps
Multi-window mode added.
Improved, sustainable sound (doesn't damage your earspeaker, like a certain soundmod out there)
No deep system modifications (the world is yours, he-he)
Additional packs which will make Stock look like AOSP or (in the future) CyanogenMod/LOS
And much, much more...
Version 3.5 changes:
-Regressed to SkyMelon8 Kernel due to some issues with SMK9 causing bootloops
-Fixed an issue where screen casting was disabled
-Tweaked some system colours
-Fixed Face Unlock being unavailable
-New UI with rounded corners
-Redesigned Settings app, fixed some issues with colours
-New fonts from Google Pixel for a more AOSP look
Installation:
Concept-ify is now a universal zip for ALL models! Simply flash the zip through TWRP over stock 1.33 (make sure you're on the latest version!)
The latest version, stable_v3, comes in a convenient single zip format. Flash it in TWRP, and follow the on screen instructions.
Users who are currently on Concept-ify stable_v2 can choose the "Update" option, and newcomers can choose "Install" for a clean install.
Enjoy!
Concept-ify download:
Concept-ify
Latest TWRP:
TWRP 2018
Confirmed working on:
All models!
Stable v3 screenshots
Current issues:
-Screen mirroring does not work, and it will be fixed very soon Screen mirroring fix
Tip on how to get more free space here
Let us know of any other issues on our Telegram group.
Thanks to: @AndyPhoenix9879 for his kernel, to @Cubbins for the latest TWRP and general help
XDA:DevDB Information
[STOCK-AOSP][UPDATED]Concept-ify - the AOSP-ed MM ROM (now with easy installation), ROM for the Sony Xperia M4 Aqua
Contributors
Gray47Maxx, trpsl, Pachops427, kamilkos16 (He's the most important guy out there)
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 26.3.A/B.1.33
Based On: Stock 1.33
Version Information
Status: Stable
Current Stable Version: stable_v3
Stable Release Date: 2018-04-02
Current Beta Version: 0.9.5 RC2
Beta Release Date: 2017-09-10
Created 2017-10-08
Last Updated 2018-08-05
Changelog:
V3:
-Migrated to SkyMelon9 Kernel
-Fixed an issue where screen casting was disabled
-Tweaked some system colours
-Fixed Face Unlock being unavailable
-New UI with rounded corners
-Redesigned Settings app, fixed some issues with colours
-New fonts from Google Pixel for a more AOSP look
V2:
-You can replace/reinsert your SIM card without rebooting the phone
-You don't need to have Sony's Album to preview photos taken on stock camera
-Left sided clock
-Transparent QS panel
-Some more minor changes in UI
[RESERVED]
[RESERVED]
][
Video instruction of installation!
PM to me if you experience any problem with this pack
Mine is M4 / 16GB . Is it possible to install this patch on pexo rom v3 ( stock mm based rom )
I have 956 mb free in system partition
Interesting... Some questions:
- Should I do this procedure on a fresh install of stock rom? Or can I do it on my setup which is stock rom with some bloatware removed with TWRP scripts?
- Will this result in a fresh install? Will I lose my data and apps?
- If I get careless and **** things up, will my current TWRP backup restore everything(even fix the partitions)?
sigois said:
Mine is M4 / 16GB . Is it possible to install this patch on pexo rom v3 ( stock mm based rom )
I have 956 mb free in system partition
Click to expand...
Click to collapse
There isn't any script for 16 GB version by now because I think it's not necessary
---------- Post added at 12:15 AM ---------- Previous post was at 12:09 AM ----------
velet said:
Interesting... Some questions:
- Should I do this procedure on a fresh install of stock rom? Or can I do it on my setup which is stock rom with some bloatware removed with TWRP scripts?
- Will this result in a fresh install? Will I lose my data and apps?
- If I get careless and **** things up, will my current TWRP backup restore everything(even fix the partitions)?
Click to expand...
Click to collapse
- u can try on some modified system but I don't guarantee it'll work like it should
- no if u backup data u shouldn't lose anything / It's in second step
- if u follow instructions u should be fine !!! Just be carefull and precise !!!
Can I apply this for E2312 8G?
---------- Post added at 10:04 AM ---------- Previous post was at 10:01 AM ----------
The system more than 4GB, after apply this u have 5.5Gb that's mean move system app to SDCard?
SDcard can be format in this process.
So I should first flash a tft file, then do this?
Sowa96 said:
So I should first flash a tft file, then do this?
Click to expand...
Click to collapse
Yes, you can. You'll get more space then)))
I've flashed a clean tft file via flashtool, then I flashed it via TWRP. Now, it's been 20 minutes and it still didn't boot. And the phone is heated up.
Sowa96 said:
Now, it's been 20 minutes and it still didn't boot. And the phone is heated up.
Click to expand...
Click to collapse
Hmm... What did you do before bootloop? Have you only flashed the ZIP file?
I flashed a clean rom via flashtool, flashed recovery via fastboot and flashed it via twrp.
Sowa96 said:
I flashed a clean rom via flashtool, flashed recovery via fastboot and zipped it via twrp.
Click to expand...
Click to collapse
So, you haven't done anything with a partition resizing? It may be because of this. Also, have you wiped before flashing the FTF?
Gray47Maxx said:
Let's begin!
Code:
1. First of all, you need to install this patch: [URL="http://4pda.ru/pages/go/?u=https%3A%2F%2Fwww.dropbox.com%2Fs%2Fb2l2qosgocmyow6%2FM4_PATCH.zip%3Fdl%3D0&e=64409382"]this one.[/URL]
...
Click to expand...
Click to collapse
And what does this patch exactly?
And will it do its job as it should if the stock system is already some tuned and tweaked (e.g. debloated, especially with associated odex files, also: with Xposed, Adopted storage formatted as F2FS, etc)?
Aqua E2303, MM modded, SkyMelon
ivy.lally said:
And what does this patch exactly?
Click to expand...
Click to collapse
The main patch will delete some unnecessary apps (AFAIK even Google ones) and will replace them by the Xperia X analogs
ivy.lally said:
And will it do its job as it should if the stock system is already some tuned and tweaked (e.g. debloated, especially with associated odex files, also: with Xposed, Adopted storage formatted as F2FS, etc)?
Click to expand...
Click to collapse
Probably, no. So much tweaks for the system. But you can make a backup, reflash the whole system, then get another backup and use this.
Gray47Maxx said:
patch will delete some unnecessary apps (AFAIK even Google ones) and will replace them by the Xperia X analogs
Click to expand...
Click to collapse
Xperia X, what is it?
And if a system is already debloated (including bloat apps odex files, so much free space is retrieved), Google stuff is replaced with "pico" opengapps.org,
then is the patch needed at all for resizing partitions with parted?
---------- Post added at 10:41 PM ---------- Previous post was at 10:36 PM ----------
Gray47Maxx said:
Let's begin!
Code:
...
6. Type: /external_sd/parted /dev/block/mmcblk0
7. Now you have to type in one by one:
rm 30
rm 29
mkpart primary 742 6142
mkpart primary 6142 7818
name 29 userdata
name 30 system
...
Click to expand...
Click to collapse
And how much free space is needed in the system partition to resize it this way?
ALTERNATIVE QUESTION:
Is the both partitions boundary, i.e. 6142
in:
Code:
mkpart primary 742 6142
mkpart primary 6142 7818
Is it set arbitrarily and we could set other value instead according only to our needs,
or
it must conform to some physical medium quantization (blocks etc) to maintain optimal data writing there?
Aqua E2303, MM modded, SkyMelon
ivy.lally said:
ALTERNATIVE QUESTION:
Is the both partitions boundary, i.e. 6142
in:
Code:
mkpart primary 742 6142
mkpart primary 6142 7818
Is it set arbitrarily and we could set other value instead according only to our needs,
or
it must conform to some physical medium quantization (blocks etc) to maintain optimal data writing there?
Aqua E2303, MM modded, SkyMelon
Click to expand...
Click to collapse
mkpart primary 6142 7818 means that the partiton start on 6142MB and it end on 7818MB which makes 1676MB partition so for example:
Code:
mkpart primary 742 6142
mkpart primary 6142 7818
You want to make first partition bigger so u take 200 mb from second one and get 742 6342 and 6342 7818 like that
U can't change 742 or 7818 u can change 6142 but in both commands must be same

[kernel][OneUI] hadesKernel v1.4 for S8/S8+/Note8 Exynos [10.10.2019]

Code:
Disclaimer
#include
*
* [B]Your warranty is now void.[/B]
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Welcome to hadesKernel
Some personal thoughts:
- this kernel works only on exynos variants of S8(+) and Note8, only Pie and OneUI based roms (stock and stock based roms) I'm not responsable for what can happen if you flash on other devices/roms/android versions.
- if you take any of my work without my permission i'll report you, and you'll probably get banned.
- you should read at least install instructions stated in this post - i won't offer support for any issues regarding installation;
- for more info about features included and bug reports make sure you read post #3;
- press 'Thanks' button instead of saying it - it will keep the thread clean and keep me motivated to do more;
- feel free to send me some coffee (which btw, runs out pretty quick) via paypal, if you want to support my work.
Supported devices:
- G950F / G950FD / G950N / G955F / G955FD / G955N / N950F / N950FD / N950N
Features
G95*FXXS5DSI1 September and N950FXXS7DSH6 June security patch source
compiled with gcc 9.1
RMM/KG prepatched (more info about RMM here)
fully enforcing with the ability to change to permissive
disabled tima/knox/rkp/defex/dm_verity/fips/knox
enabled mass_storage for DriveDroid (download here latest beta app)
disabled zswap and added zram
Led fade
Moro Sound control
Boeffla Wakelock blocker
Wireguard support
blu_active CPU governor
other compiler optimizations
init.d support
dex with any hdmi adapter
crc/fsync toggle
ramdisk scripts for on boot optimizations
disabled excessive samsung logging/tracing
Bugs:
none encountered (see FAQ on #3 post for workarounds)
Instructions:
make sure you have a compatible rom installed (any OneUI pie rom including stock and stock based roms)
make sure you have TWRP 3.3.x installed (download latest official for Note8 or S8/S8+, install instructions here)
download zip and put it into phone's storage
enter TWRP recovery
flash zip
optional - flash root
reboot and enjoy
optional - download and install hKtweaks or MTweaks to be able to change some settings.
Telegram support
Updates and info channel
Support group
Downloads
on #2 post
Credits:
*Noxxx
*djb77
*MoroGoku
*farovitus
*6h0st
*remilia15
*frap129
*ananjaser1211
*BlackMesa123
*Lord Boeffla
*Faux123
*kernel testers
*if i missed someone PM me and i'll add
XDA:DevDB Information
hadesKernel , Kernel for the Samsung Galaxy S8
Contributors
corsicanu
Source Code: https://github.com/corsicanu/android_kernel_samsung_universal8895
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v1.4
Stable Release Date: 2019-10-10
Created 2019-05-27
Last Updated 2019-10-10
Reserved
Changelog/Downloads
hadesKernel v1.4
hadesKernel v1.3
hadesKernel v1.2
hadesKernel v1.1
hadesKernel v1.0
initial release
Download - hadesKernel_v1.0 - AndroidFileHosthttps://www.androidfilehost.com/?fid=6006931924117882979
Reserved
FAQ:
Q: How to report bugs?
A: If you want to report a bug make sure you include:
-device variant / modem version / bootloader version / region
-detailed info about the encountered issue
-steps to reproduce the bug
-logs
Q: How to take logs?
A: Download Logcat Extreme and take a look at this.
Q: Does it work with stock rom?
A: Only if you format data on TWRP before installing, if you had stock kernel before - please do note this will erase all your data and internal storage
Q: How to revert to stock kernel?
A: That's not a choice at this moment, you either reflash your current custom rom (if that had stock kernel included), or install stock firmware via Odin which will probably cause damage to all your data including internal storage.
Q: What semi-systemless kernel means?
A: I changed the way of patching camera drivers and secure storage libs in a way to avoid altering original files, so if you are on stock rom and stock kernel, you can simply backup your boot.img and if you don't like hades you can restore that boot.img without any futher issues.
Q: Saved wifi/bluetooth connections don't work anymore, what to do?
A: Simply forget and reconnect wifi networks and/or re-pair bluetooth devices.
Q: Why is this kernel better than *&% kernel?
A: I never said it is and i also don't like to compare. You are the only that can decide if it is or not for your use.
Q: Why this kernel?
A: I made this kernel to disable samsung security and add few things for myself, since it went pretty well for me i decided to include it in the rom and release as separate too.
Q: Why samsung security disabled?
A: Samsung firmware and kernels are signed and made to get along eachother untampered. The second you change something (even only with rooting stock rom), that very moment security starts to spam in logs/operations which can result in lags/heats/freezes etc. Since we can't sign our roms/kernels as samsung, it`s better to disable security to avoid conflicts and ulterior issues.
Q: What's Moro Sound and how does that work?
A: It's an advanced sound control implemented first in S7 by @morogoku, which can be found in hKtweaks / MTweaks - sound section.
You can change the output gain for speaker(s) and headphones, and also the equalizer to one of the profiles inside, or to your very own profile according to your taste.
*I'm not responsable for any damage made by yourself on your phone/headphones/ears using too high values on this mod. If you are in doubt just leave it disabled or switch to other kernel.
Q: Why a separate tweaks app?
A: I made this app to properly maintain and adapt A5/A7 2017, your choice what app you want to use.
One more
very nice :good:
RAM - 3.4gb
Its always nice to have a variety of kernels for our devices. Thanks dev.
On this kernel TitaniumBackup can not see its copies on the SD card (rom @aliwaris).
Everything OK on the NX kernel.
On my phone with this kernel Titanium Backup works fine and see copy on SD
Substratum
Substratum does not work with this kernel
no problems with Noxxx,any idea?
goatface2106 said:
Substratum does not work with this kernel
no problems with Noxxx,any idea?
Click to expand...
Click to collapse
It's working fine, just follow this workaround after flashing kernel.
https://forum.xda-developers.com/ga...-stock-v1-1-s8-s8-note8-t3891932/post79567893
AndrzejDwo said:
It's working fine, just follow this workaround after flashing kernel.
https://forum.xda-developers.com/ga...-stock-v1-1-s8-s8-note8-t3891932/post79567893
Click to expand...
Click to collapse
It worksThx! :good:
Is running... Thx ?
hadesKernel v1.1:
Changelog:
- fixed moro sound issues
- enabled dex with any hdmi adapter
- added crc toggle
- added fsync toggle
- disabled zipalign at boot to avoid substratum issues
- touchscreen ops improvements to avoid some stutters or unneeded wakeups
- made it semi-systemless kernel (more info on FAQ)
- ramdisk improvements from S9 June release
- better zip extracting/patching scripts
Install instructions:
- flash as normal zip in TWRP, no wipe needed
*if coming from stock kernel you probably need to format data in TWRP - this will cause losing all data including internal storage
Personal notes:
If coming from stock kernel you probably need to format data in TWRP - this will cause losing all data including internal storage
Kernel zip doesn't contain any root, flash root of choice after flashing the kernel.
Download:
hadesKernel_v1.1 - AndroidFileHost
Telegram support
Updates and info channel
Support group
Misc links
Official TWRP for Note8
Official TWRP for S8/S8+
O/P Bootloaders and modems
Click to expand...
Click to collapse
Regards
hadesKernel v1.2:
Changelog:
- Merged G95*FXXU4DSE4 May source and N950FXXS6DSF2 June source
- Updated ramdisk to N950FXXS6DSF2 June
- Optimized Integer SQRT. for upto 3x faster operation
- Compiled with GCC 9.1
Install instructions:
- flash as normal zip in TWRP, no wipe needed
*if coming from stock kernel you probably need to format data in TWRP - this will cause losing all data including internal storage
Personal notes:
If coming from stock kernel you probably need to format data in TWRP - this will cause losing all data including internal storage
Kernel zip doesn't contain any root, flash root of choice after flashing the kernel.
Download:
hadesKernel_v1.2 - AndroidFileHost
Misc links
Telegram Updates and info channel
Telegram Support group
Official TWRP for Note8
Official TWRP for S8/S8+
O/P Bootloaders and modems
Click to expand...
Click to collapse
Regards
Superb kernel fast smooth and better battery life thank you
Awsome ! Can we use NetHunter with his kernel ? (like rubber ducky)
Good Kernel, Tested On My Personal ROM... OK!
MegaloXDA said:
Good Kernel, Tested On My Personal ROM... OK!
Click to expand...
Click to collapse
could i ask u : why do u stop ? becuz some1 says sth stupid ?
Congrat to developer. You have done a great job with this v1.2 kernel. When I first used it was on ROM Hades v17. I had to go back to Hades v16 cause my battery didnt last a day. In the meantime I have updated to Hades v18, even though I was reluctant to do it. I big smile is on my face cause the kernel works nothing less than perfect. Thanks a million.

[VENDOR]Community Vendor[9.x/10.x][PL2]

Code:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this TREBLE
* SUPPORT before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
What is Project Treble:
Project Treble basically partitions your device into two separate partitions, a system and a vendor: system contains your generic system image, while vendor partition has your device specific files required for booting and running your phone. This way we can easily change the system image and be able to run our device on different system images with the same kernel and vendor partition
Read more about Project Treble
Functionalities:
- Vendor Security Patch Level is 2019-06-05
Downloads:
- Google Drive
How to report bugs:
- Logcat and a simple description of the bug, kmsg or dmseg depending on the bug
What's Packaged in the zip:
- A compressed vendor image
How to use:
- Boot to TWRP
- Wipe all partitions
- Format data/userdata partition
- Flash Modified vendor flashable zip package on both slots (One we shared. Needs to be flashed only once)
- Install the GSI/Custom ROM you wish to use
- Reboot
- If GSI/Custom ROM doesn't include gapps flash and boot
Important notes:
- Formatting data (all user data is wiped, including internal storage) is a must if Stock was previously installed and device was encrypted.
Working:
- Everything
Broken:
- Found something? Report it!
XDA:DevDB Information
Community Vendor, ROM for the Nokia 6.1 (2018)
Contributors
TheImpulson
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Flash this on a custom ROM
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2020-02-06
Created 2019-07-06
Last Updated 2020-02-14
Reserved
Reserved
can this work on Chinese version?
white bbg said:
can this work on Chinese version?
Click to expand...
Click to collapse
It will work as long as it is not stock rom.
:good:
Does this vendor image get updated every time there is a Google Security Update? In other words, is that update on this partition or the system partition?
Clsoing down this thread as flashing a seprate vendorimage is not required anymore on my builds. Updated ROM builds that I maintain will roll out soon.
Community vendor r2 is up. Must be used with Android 10 (Q) ROMs only.
Community vendor r2.2 (2-2) is up!
Changelog:
- Nuked crashing hidls
- Updated display props to make display more responsive
"can this work on Chinese version?
It will work as long as it is not stock rom. "
hi there
i am on stock 7.1.1 chinese version. how do i get this to work?
thanks in advance.
paparansen said:
"can this work on Chinese version?
It will work as long as it is not stock rom. "
hi there
i am on stock 7.1.1 chinese version. how do i get this to work?
thanks in advance.
Click to expand...
Click to collapse
Yes

Categories

Resources