Hey guys I'm trying to connect my g3 to dfs, I installed sever g3 drivers but no go I get the mtp but no diagnostic mode what's so ever I tried uninstalling and deleting the drivers but nothing works thanks in advance guys .
##DIAG# MSL ENABLE
Check if developers options are on, further USB debugging has to be on.
Under pull-down notification, set the phone to charge only when your USB cable is connected to a comp.
Check with different USB ports.
Related
I recently started to root my LG phone but it failed throughout the process. Now everytime I connect my phone via USB to my computer charges my phone but my computer won't show it or read my phone like it is not connected nor will my phone say it is connected to my computer. I have the drivers downloaded. Is there a way to fix it?
KieKazami said:
I recently started to root my LG phone but it failed throughout the process. Now everytime I connect my phone via USB to my computer charges my phone but my computer won't show it or read my phone like it is not connected nor will my phone say it is connected to my computer. I have the drivers downloaded. Is there a way to fix it?
Click to expand...
Click to collapse
In 1990 to 2002 we have been using Serial Ports (COM1, COM2) and Parallel Ports(LPT1) for devices and they never gave connect problems like USB gives. USB works for some time and then the driver gets damaged or devices not recognized due to Voltage Problems, etc etc.
USB problems are very common these days. First thing you should try is, UNINSTALL DRIVER from PC and Restart PC. Connect PC to Internet, then reinstall latest LG Android Driver and connect phone with USB. Phone will install drivers for Slow Charging mode,...
...then select usb mode to PTP, phone will install driver for PTP,
...then select usb mode to MTP, phone will install driver for MTP,
...then select usb mode to LG Software Mode, phone will install driver for LG Sorftware Mode.
Now your phone is set for every mode you need. Hope this helps
cmahendra said:
In 1990 to 2002 we have been using Serial Ports (COM1, COM2) and Parallel Ports(LPT1) for devices and they never gave connect problems like USB gives. USB works for some time and then the driver gets damaged or devices not recognized due to Voltage Problems, etc etc.
USB problems are very common these days. First thing you should try is, UNINSTALL DRIVER from PC and Restart PC. Connect PC to Internet, then reinstall latest LG Android Driver and connect phone with USB. Phone will install drivers for Slow Charging mode,...
...then select usb mode to PTP, phone will install driver for PTP,
...then select usb mode to MTP, phone will install driver for MTP,
...then select usb mode to LG Software Mode, phone will install driver for LG Sorftware Mode.
Now your phone is set for every mode you need. Hope this helps
Click to expand...
Click to collapse
Hi, i have a Optimus L9 P778 (Argentina) I have problems for connect to the PC(Is a new device i not rooted or installed any). When connect phone with USB and install drivers. But the phone dont showme to select the connection type. When i swicht to PTP or MTP dont install new drivers.... only show this 3 options in my devices:
LG Mobile Phone
LG Mobile(Modem)
LG Mobile(Serial)
In My PC dont showme the device but the LG Support tool detect my phone, version of sw. But it says i need to install the drivers, if I enter an infinite loop saying the same thing.
Thanks for the help...
---------- Post added at 11:29 AM ---------- Previous post was at 11:13 AM ----------
Fixed! I make a Hard reset and now worsk Fine :laugh:.... fuking Android
EDIT: Fixed it. settings>storage>menu>USB computer connection>enable MTP connection
My lg e970 running PA 3.99+ cant be seen by the computer anymore. It does not show up in device manager. It only charges when connected. I tried reinstalling the lg drivers. I also tried toggling fast charge in trickster mode on and off again, but still no luck. There is still no notification on the phone to select usb connection mode, mtp or ptp. I also tried toggling fast charge in trickster mode on and off again. I went into usb tethering and it says "usb not connected". The only way the computer sees the phone in device manager is if it is in fastboot with the nexus 4 universal adb driver. Even then, I can't see it in windows explorer as a mtp interface.
Hey guys I'm trying to connect my g3 to dfs, I installed sever g3 drivers but no go I get the mtp but no diagnostic mode what's so ever I tried uninstalling and deleting the drivers but nothing works thanks in advance guys .
You need to enable the developers option on and usb debugging on in it. also put the phone in charge mode only from MTP. enable diag using ##DIAG#. Install the drivers again. change USB port also.
Hello, I need help to activate USB debugging mode. I don't know why I don't have the option. I mean, I have turned on the developer options, also I have turned on the USB debugging mode. The problem is that whenever I plug my phone I only receive the MTP mode, not debugging mode. I was in fulmics 7.5 rom and thought that was the problem, but I returned to stock 10B and nothing.
OK to start I rooted using LGUP with a rooted stock 20j ROM.
I eventually flashed the 20L update but went back to my 20j backup because I found it runs smoother.
My issue is that my laptop will not recognize my device via ADB/Fastboot. I've tried re-installing the LG drivers with no luck. I have several LG devices that are recognized this is the only one that will not be recognized.
Any help would be much appreciated.
hm, can you provide some extra info on what you have done? In general what you have to do in order to make it accessible is the following:
Enable Developer Mode
Enable OEM Unlock
Try "revoke USB debugging authorization"
And then reenable USB debugging and try again
Also try with another cable and try some other USB port in your laptop or PC.
Sometimes some USB ports wont recognise the device unless you do some procedure to uninstall the driver for the specific USB port. For now just try to change the port and the cable.
TheoKondak said:
hm, can you provide some extra info on what you have done? In general what you have to do in order to make it accessible is the following:
Enable Developer Mode
Enable OEM Unlock
Try "revoke USB debugging authorization"
And then reenable USB debugging and try again
Also try with another cable and try some other USB port in your laptop or PC.
Sometimes some USB ports wont recognise the device unless you do some procedure to uninstall the driver for the specific USB port. For now just try to change the port and the cable.
Click to expand...
Click to collapse
I've tried all that. I can't remember but it didn't start till after a flashed a ROM. IDK what one though and can't even remember which one's I flashed.
Thanks for the reply though!
Sent from my LG-H901 using Tapatalk