Lenovo Vibe X2 - Android Q&A, Help & Troubleshooting

Hi,
i've just bought the new Lenovo Vibe X2 directly in china (model X2-TO, dual sim), the phone comes with cn firmware without gapps but you can flash the ROW firmware (official X2-EU) that contain the full gapps, but i have the following problem:
using X2-TO firmware: connection possible only in edge
using X2-EU firmware: no radio detected
It's possible to flash a different baseband? Inside the rom package package found at needrom site, i see two different baseband (.img file), but i don't understand how to use it.
Many thanks for help and suggestion

ugocat said:
Hi,
i've just bought the new Lenovo Vibe X2 directly in china (model X2-TO, dual sim), the phone comes with cn firmware without gapps but you can flash the ROW firmware (official X2-EU) that contain the full gapps, but i have the following problem:
using X2-TO firmware: connection possible only in edge
using X2-EU firmware: no radio detected
It's possible to flash a different baseband? Inside the rom package package found at needrom site, i see two different baseband (.img file), but i don't understand how to use it.
Many thanks for help and suggestion
Click to expand...
Click to collapse
Hi
Just use any root explorer and copy and replace modem.img in /system/etc/firmware/modem.img with the one from needrom site and set proper permission rw-r-r (644) and reboot your phone .

4shreyas said:
Hi
Just use any root explorer and copy and replace modem.img in /system/etc/firmware/modem.img with the one from needrom site and set proper permission rw-r-r (644) and reboot your phone .
Click to expand...
Click to collapse
Hi,
unfortunately the device is noot rooted, and i haven't found a procedure to do it yet...

ugocat said:
Hi,
unfortunately the device is noot rooted, and i haven't found a procedure to do it yet...
Click to expand...
Click to collapse
Hi
Use MTK chopper (from pc) or framaroot app to root your device

Hi,
framaroot don't work, tried all exploit (boromir, faramir, barahir), where i can find mtk chopper?

Hi
Link to motochopper : https://drive.google.com/folderview?id=0B-jnfJDmuKlCUFM1b3ZzWnNJaEU&usp=sharing
Guide:
Connect the phone with USB debugging enabled to PC via USB cable and run the motochopper (run.bat file). follow instructions in cmd prompt . Now the tool should push the exploit and root your phone. if no device is detected, install the correct drivers and try again.
Hit THANKS if it works

4shreyas said:
Hi
Link to motochopper : https://drive.google.com/folderview?id=0B-jnfJDmuKlCUFM1b3ZzWnNJaEU&usp=sharing
Guide:
Connect the phone with USB debugging enabled to PC via USB cable and run the motochopper (run.bat file). follow instructions in cmd prompt . Now the tool should push the exploit and root your phone. if no device is detected, install the correct drivers and try again.
Hit THANKS if it works
Click to expand...
Click to collapse
No success

ugocat said:
No success
Click to expand...
Click to collapse
Try "RootGenius" http://www.shuame.com/en/root/
Works for me every time.

Vibe X2 Radio not working
Dear all
I bought a Vibe X2 in China and installed the ROW ROM. Unfortunately the baseband (2G,3G,4G Modem) will be not recognized. I tried all the recommend root kits but no root kit is working. Do you know how I can root my Vibe X2 in order to install the correct modem image?
Thanks a lot for your help

Hi,
unfortunately i'm still wating for a solution

You Found something to Root it ? i have Indian Version and want to root it.

I just found this on net but not tested if work or not.
Download and copy SuperSU File on your device’s internal memory
Super SU --> http://www.mediafire.com/download/3q679a2jelhcumc/UPDATE-SuperSUv1.94.zip
Now connect your phone with USB.
Download, extract the SP flash tool to your local computer and click on Flashboot.exe
SP Flash Tool --> http://www.mediafire.com/download/kmt3bjcga3pyymf/SP_Flash_Tool_exe_v3.1344.0.212.rar
Now click on Sacatter file loading button and select the scatter that you are about to download to your computer
Scatter File -->http://www.mediafire.com/view/1ay2bacoyqo3mow/MT6582_Android_scatter_emmc.txt
Now select the Check Box BOOTIMG and select the Boot IMG that you download below.
Boot Image and CWM Recovery --> http://www.mediafire.com/download/cxc72ujjpxrg3if/Root_Lenovo_Vibe_X2_XDA.rar
Now select the Check Box RECOVERY and select the RECOVERY IMG that you just downloaded above.
Now Bookt in recovery mode (power key+Volumeup+Volumedown).Slect recovery mode and click install FROM SD Card.
Select UPDATE-SuperSU-v1.94.zip and this will root your device and add the SUuser

Not working there is no any proper root method for root?

I would love for a solution in order to change the baseband on the X2-TO. I'll even pay for it, if someone is willing to put the time in it. I love the phone, but I hate the fact that I can only get EDGE, if I'm lucky.

Unfortunstely, whatever you do, your device can't have 3g network because you bought wrong device. X2-to is based on TD-scdma network which just used in china, china telecom, and can only have 2g if you use wcdma. You should buy x2-cu version which is wcdma version.
Anyway I still looking for root method since I can't move my data without root access.. pleas tell me if anyone know. Thanks

Any news on root yet?
Been out for a while so it's getting a bit ridicilous

Really?
So I will never have 3g or 4g with this phone?No update can fix that?nothing at all?are you sure?

Still can not root this phone?

What about Towelroot

Mittul Shah said:
What about Towelroot
Click to expand...
Click to collapse
tried already with towelroot with no luck

Related

••••••Lenovo P780 ™All Things Guide••••••

All Things Guide For Lenovo P780
What is Rooting ?Android rooting is the process of allowing users of smartphones, tablets, and other devices running the Android mobile operating system to attain privileged control (known as "root access") within Android's subsystem.
[Tutorial]
How to root.
WARNING:
• This will void your warranty.
• Do with your own risk.
credits to All Developers
1.Download Framaroot credits to XDA (http://www.mediafire.com/download/5q604sfl56asbfx/Framaroot-1.8.1.apk)
2. Install it on your phone.
3. Open it and choose Install SuperSu then press Boromir.
4. A message will be dispalyed stating Success
5. Reboot and Enjoy a rooted phone.
What is CWM (Clockworkmod)
Why do we need to install CWM ?
• This is where we can backup our files
• This is where we can install ROMs for our phones
WARNING :
• Do with your own risk.
• Need a Rooted Phone.
1. Download http://www.mediafire.com/download/37ail0o686u1qu8/recovery_P780_CWM_6.0.1.5.rar
2. copy it to your sd card
3. Extract and copy the recovery_P780_CWM_6.0.1.5.img to sd card
4. Install Mobile uncle tools 5. select update recovery6. select recovery_P780_CWM_6.0.1.5.img and update 7. you are done
8. You now have English CWM Recovery v6.0.1.5.
9. You can enter the recovery by turning off your phone, hold Vol.up+vol.down+power button, release after the phone power up.
Step by step guide to Flash stock rom:
1.If your phone is not already soft bricked, back up whatever you want. External SD card is fine. If your phone is soft-brick then say goodbye to your data and skip this step.
2. Uncompress all the files you downloaded from this thread into a directory where you can remember. Including the ROMs.
3.Shutdown your phone if its not in a bootloop. If it is skip this step.
4.Open "Device Manager" on your Windows PC.
5.Plug in your phone through the micro USB cable. A device will show up for a few seconds in "Device Manager". After that, it will disappear again!
6.Recognize the device tree where it appeared, and wait for it as you unplug and plug in your phone again (if bootloop, its automatic!)
7.Catch it with a right click as it appears! Then choose "Update Drivers" and pick the directory where you uncompressed the drivers you downloaded above. Its ok if after catching it the device disconnects. You only need to install the drivers now.
8.Assuming the drivers are correctly installed, run the Smart Phone Flash Tool.
9.Click on scatter-loading and choose the scatter file "MT6589_Android_scatter_emmc.txt" of the ROM you want to flash.
10.Make sure the checkbox "DL DA All With Check Sum" is CHECKED
11.Click on "Firmware->Upgrade" button.
12.Plug in your powered down phone via the USB cable again. See it flash.
13.When a big green circle appears on the screen, your are done!
Flash Tool
http://www.mediafire.com/download/lj7n6lfcj2bzg9o/FlashTool.zip
Drver
http://www.mediafire.com/download/11vk97208ab9pl0/MTK_USB__Driver.rar
By the way if anyone having trouble installing the driver, here is a tutorial: http://www.youtube.com/watch?v=dlYGfJM2BJ0
Stock ROM
STOCK ROM ROW123 4GB
https://docs.google.com/uc?id=0B5l5EfGG-gaaNUhnRFRoODNpaUk&export=download
STOCK ROM 4GB ROW123 OTA update
http://lenovo-forums.ru/Files/OS/P780/P780_ROW_S123_131231/update.zip
STOCK ROM ROW119 8GB
https://docs.google.com/uc?id=0ByFuurF7QLtkekVfekVfWmE4czA&export=download
STOCK ROM 8GB ROW123 OTA update
http://www.mediafire.com/download/71a55v6vfboc99e/P780_8GB_update.zip
LIST OF ROM
Samsung 4.2.2 rom ported for Lenovo P780
http://forum.xda-developers.com/lenovo-p780/development/lenovo-p780-4-2-2-custom-rom-t2617045
P780 Xperia Fusion Rom
http://forum.xda-developers.com/lenovo-p780/development/p780-xperia-fusion-rom-t2658127
Enjoy!
Gud work..
Can u tell me what Lenovo has changed from s119 to s123. Upgrade.
one question getting back to stock
hi
just one question if i want to get back to stock
is this what i do
1. flash the 119 8gb via flash too
2. then flash the OTA 123 via flash tool
im on the 123 stock right now
or do i just flash the 123OTA via flash tool
thanks in advance :good::laugh:
U need to flash 119 with sp flash tool and update via recovery
Sent from my Lenovo P780 using xda app-developers app
Additional information about the Lenovo P780 (some information might be duplicate),
This device is usually shipped in 2 software flavors
(In addition to the hardware flash being 4GB or 8GB):
1. Chinese based version - These ones are Lenovo software ROMs sXXX, sXXX, sXXX (to fill out)
2. Worldwide / English / ROW based version - These ones are Lenovo software ROMs, s119, s123.
I Saw a couple of posts online that identifies the different version of the device by the appearance of the battery markings (Though i'm not sure that these posts are right 100% of the time)
The partitioning of the EMMC is different between the 2, and as such, Images from one of the flavors cannot be flashed (using the FlashTool) onto the other(the images are just data, the structure that is incompatible is the scatter file). - You would probably get an error from the SP flash tool since your scatter file differs from the map that actually reside on the EMMC (Nothing would be flashed).
Please note that these problems only apply when flashing an image onto the device, and not using a script / existing file system (Recovery and .zip files are using the on-device file system to update roms, that should work regardless of the scatter/base)
Rebasing:
If you'd like, there might be an option to repartition the EMMC in order to cross-flash versions.
Note that there might be 'radio' issues accross different areas for as these roms might not designed to run in your region.
Preload mode - Flashing with SPFlashTool:
On the p780 There is no need to press any volume to access preload mode (I.E. Mode that is required for flashing using SPFlashTool) just hit 'download' and connect the usb to the device while powered off.
MTK VCOM Meta mode:
If u screwed up your Prealoder, Meta mode can be accessed and you can flash with SPFlashTool
Accessing meta mode is using VOL Down+power until u see on the PC "MTK VCOM Meta" or something similar.
SPFlashTool:
Both version 5.something and 3.something seem to work for me.
Dumping your own rom:
One thing I'v noticed is that if you dump your entire image (For example with MTKTools)
The preloader paratition outputted WHEN READING, differs from the input paratition file THAT IS AVALABLE ON DOWNLOADED ROMS.
Seems that when writing with the spFlashtool, address 0x0 is in fact 0x800 (ie, in the file you dump from your device there are extra 2048 bytes before the preloader paratition). If u'd like to flush a ROM you dump, be sure to check for this. It is very noticable that a downloaded rom prelaoder.bin differs from a dumped preloader.bin in the first 2048 bytes.
==
The above information was VERY VALUABLE to me when I received my phone, and this information weren't to be found anywhere gathered together.
problem flashing stock
Hi, I'v tried the above, but cant get the stock rom to flash:
ashoknraj said:
All Things Guide For Lenovo P780
Stock ROM
STOCK ROM ROW123 4GB
https://docs.google.com/uc?id=0B5l5EfGG-gaaNUhnRFRoODNpaUk&export=download
Click to expand...
Click to collapse
1. Does not flash on my P780 ROW 4GB (PMT Changed must be reflashed error) Although that it seems like the same scatter file
ashoknraj said:
STOCK ROM 4GB ROW123 OTA update
http://lenovo-forums.ru/Files/OS/P780/P780_ROW_S123_131231/update.zip
Click to expand...
Click to collapse
2. Does not updates (using the newly-flashed CMR), fails on "assert" the version of the ROM (currently using the other thred's S123 ROW)
HLLH said:
Hi, I'v tried the above, but cant get the stock rom to flash:
1. Does not flash on my P780 ROW 4GB (PMT Changed must be reflashed error) Although that it seems like the same scatter file
2. Does not updates (using the newly-flashed CMR), fails on "assert" the version of the ROM (currently using the other thred's S123 ROW)
Click to expand...
Click to collapse
you cannot flsh 8b ver on 4gb
HLLH said:
Hi, I'v tried the above, but cant get the stock rom to flash:
1. Does not flash on my P780 ROW 4GB (PMT Changed must be reflashed error) Although that it seems like the same scatter file
2. Does not updates (using the newly-flashed CMR), fails on "assert" the version of the ROM (currently using the other thred's S123 ROW)
Click to expand...
Click to collapse
You cannot flash 8gb ver on 4gb
deleted, used the long way and got it done
ashoknraj said:
You cannot flash 8gb ver on 4gb
Click to expand...
Click to collapse
SURE - I Did not! I tried to flash 4GB ROM u posted on a 4GB device!...
Great post ! Thanks. :good:
ashoknraj said:
U need to flash 119 with sp flash tool and update via recovery
Sent from my Lenovo P780 using xda app-developers app
Click to expand...
Click to collapse
sir please tell me after install s119 with spflashtool how to update s123 ?
for updating s123 via recovery we need wich recovery.... ? stock recovery (provided with s119 sp flashtool rom) or English CWM Recovery v6.0.1.5 ????
(sorry for my bad english)
Stock recovery
Sent from my Lenovo P780 using xda app-developers app
hey, does this ROM support the dual SIM facility?
I have a Chinese phone with stock ROW 119 installed but with baseband S820 v51. Is it ok to flash with ROW S123 and then ROW S124 or do I need to change the baseband back? If I uograde the stock ROM, will it also change the baseband?
Help..!! Phone not switching on
Hi all
I was trying to install XVIBE_ROM_v03 rom from the forum here and resulted in softbricking my lenovo P780 ROW 4 GB version.
After opening the flash tool and selecting the check box DA DL with checkbox and after clicking the Firmware->Upgrade button, i tried plugging in my cell (which is not powering on)
the flash tool doesnt proceed with a Blue and Green circles but simply doesnt do anything.
My cell is also not able to power on, is is serious, how can i revive my P780.
Please help me..!!:crying::crying:
Remove back cover, remove memory card. Near memory card slot there is red button just press it once. Now try to switch on.
Sent from my Lenovo P780_ROW using xda app-developers app
Dark_Horse said:
I have a Chinese phone with stock ROW 119 installed but with baseband S820 v51. Is it ok to flash with ROW S123 and then ROW S124 or do I need to change the baseband back? If I uograde the stock ROM, will it also change the baseband?
Click to expand...
Click to collapse
Ok, I answered my own question. Flashed to ROW S123 using the PC tool and then updated OTA to S124. All working fine, baseband changed from S820 V51 to P780 V23 during the flash. Don;t see much difference between the two ROM's other than a new Video app and a few new options.
LED still not working for notifications on S124
@ashoknraj, thanks for the deatailed instructions in first post, hardest part is installing the damn drivers and there are some steps which were different for me to get it working:
- Download the drivers and install on the PC using the exe tool in the package. Once installed, ensure USB debug mode is enabled on your P780 and that it is powered on and then connect to your PC using the USB cable. The drivers should pick up the P780 and install the device.
- Next, power off the P780 and then connect it again using the USB. The PC should again pick up the P780 again and you will see it briefly appear as an unknown device in the Device Manager. However, no need to right click and update drivers as you have already installed them previously so just let it search automatically for the best driver to use and it will finish installing. Once done, disconnect the P780.
- Run the flash tool and only connect your P780 after clicking the "Firmware->Upgrade" button. You will see a message in the status bar of the flash tool that says "searching" and then COM once the P780 has been found. If it stays on "searching" then it means the USB drivers haven't been installed properly and you need to redo.
- The whole process to flash takes about 7-8 minutes and a sqaure with a big green circle will appear on the Flash tool once done. Disconnect your P780 and power on as normal. The first boot takes about 5 minutes so don't panic, it will just show the usual Lenovo boot screen.
- Before rooting or doing anything else, go to System Settings -> All Settings -> About Phone -> System Update to update OTA from 123 to 124.
stock ROW or SLX? why?
bootloader
I just bought the Lenovo P780. I'm really happy with it so far. Just one issue, the bootloader is in Chinese. I'm not very good at reading Chinese. Does anybody know if there is a translation of the bootloader anywhere? I've been google diving for two days with no success. Even just a translation of the pinyin would be very helpful. A custom bootloader would be better. Thanks friends.

rooting htc desire 820t

Hi all
I bought an HTC desire 820t dual SIM from China but I cannot install gapps on it..... Can't find decent info on rooting the device either
Any help how I could get gapps on my phone ?
aiden530 said:
Hi all
I bought an HTC desire 820t dual SIM from China but I cannot install gapps on it..... Can't find decent info on rooting the device either
Any help how I could get gapps on my phone ?
Click to expand...
Click to collapse
root it with kingo root HERE
download any gapps package for your android version and flash it if you have recovery, but I guess no.
If you doesn't have it, extract zip,and copy file by file to their path, then open updater-script to read permissions.
also you can try to flash zip package with this Download from here but be carefull, this app can cause bootloop (soft brick)
regards
Paget96
Paget96 said:
root it with kingo root HERE
download any gapps package for your android version and flash it if you have recovery, but I guess no.
If you doesn't have it, extract zip,and copy file by file to their path, then open updater-script to read permissions.
also you can try to flash zip package with this Download from here but be carefull, this app can cause bootloop (soft brick)
regards
Paget96
Click to expand...
Click to collapse
Tried to use kingo didn't work only tried once though any other options ?

How to install custom recovery on karbonn titanium MACHFIVE??

Please help me I want to install custom recovery on my karbonn titanium MACHFIVE.
This phone running on lollipop 5.0. & it have MediaTek MT6582 1.3 GHz Quad-core processor
&2GB of RAM & 16GB internal memory.
have you rooted your fone
need root
i know machfive is new in the market but really need at least rooting method for it cause it have some bugs though pls pls pls developers we are relaying on you for this
Yes
farhanfarhan32 said:
have you rooted your fone
Click to expand...
Click to collapse
I have rooted phone.
I root with kingroot
mukulkumars13 said:
I have rooted phone.
I root with kingroot
Click to expand...
Click to collapse
kingo root does not worked for me
Use iroot it worked for me
Need recovery for it man..... Xposed is also need to flash zip n i dont hav recovery damn!!
ajju akm said:
Use iroot it worked for me
Click to expand...
Click to collapse
kingo root , iroot , towel root, every thing failed:crying::crying:
I just rooted with iroot windows application.
ashish128 said:
I just rooted with iroot windows application.
Click to expand...
Click to collapse
which version of iroot you used?
root with kingroot
i used kingroot ver. 4.0.0 and it works try it out
after root u can use http://forum.xda-developers.com/showthread.php?t=2379412 to make recovery for ur machfive as it is a mediatek device
hit thanks if i helped
ajju akm said:
i used kingroot ver. 4.0.0 and it works try it out
after root u can use http://forum.xda-developers.com/showthread.php?t=2379412 to make recovery for ur machfive as it is a mediatek device
hit thanks if i helped
Click to expand...
Click to collapse
king root 4.0 worked:laugh:
farhanfarhan32 said:
king root 4.0 worked:laugh:
Click to expand...
Click to collapse
Hi
Just bought this phone for my friend. While trying to root with kingroot v4 and 4.5 its does not works.. Can u tell me ur frmware version number ?
Is there any recovery for this phone Karbonn Titanium Machfive.
Thanks in advance.
Sent from my MACHFIVE using Tapatalk
phone stuck in boot loop after kingroot 4.5. what to do?
model karbonn mach five.
Ya my phone too struck in karnonn logo after updating su binary...
Please anyone provide the factory image of karbonn titanium mach five ASAP..
And also provide instructions for flashing the image
Device: Karbonn Titanium Mach Five
Status: Rooted, No custum recovery installed, Bootloop...
Kingroot 4.0 worked. Rooted successfully
Sent from my MACHFIVE using Tapatalk
Recover KARBONN TITANIUM MACHFIVE
rockybilla007 said:
Ya my phone too struck in karnonn logo after updating su binary...
Please anyone provide the factory image of karbonn titanium mach five ASAP..
And also provide instructions for flashing the image
Device: Karbonn Titanium Mach Five
Status: Rooted, No custum recovery installed, Bootloop...
Click to expand...
Click to collapse
The last week I had a similar issue stuck on KARBONN logo.
I used Stock from XDA Firmware xdafirmware.com/karbonn-mach-five
Download the necessary drivers (a must) .
The downloaded compressed file will have SP flash tool with it .
1 .Open "flash_tool.exe" under "\SP Flash Tool v5.1516" folder (with admin privileges) .
2 .Navigate to the "Download" section .
3. Click on the "Scatter-loading". Browse "MT6582_Android_scatter.txt" under "Firmware" .
4. Now this will give you a list of files to flash that comes from the "\Firmware" folder . Make sure every files load correctly to the list(location can be seen to the right of the item to be flashed) . Especially "Android" which correspond to the system.img file in the \Firmware which I think which actually solves the android system related files' problems.
5. Now Power off your phone .
'''Wait for a sec ( many people advice removing the battery for a while).
6. Now click on the Download sign in the SP flash tool window . Connect your phone with the USB cable immediately and click on the volume up or down for SP flash tool to detect your phone. If the phone gets detected SP flash tool throws some info on the left pane. Then the files will start flashing . Flashing status is provided by a yellow bar at the bottom of the window.
7. After the flash is complete a green ok popup.
8. Boot your phone to recovery and Wipe the cache partition.
9. Restart the phone.
This worked with my MACHFIVE . Wishing you luck :good:.
*Flashing always have a risk of bricking your phone. Think twice before you act . I will not take responsibility.
*Always take any errors in SP flash tool seriously and consult expert advice before continuing
*Even if you are stuck on boot if you have enabled USB debugging you can use adb pull to pull your data from memory.
greentoy said:
The last week I had a similar issue stuck on KARBONN logo.
I used Stock from XDA Firmware xdafirmware.com/karbonn-mach-five
Download the necessary drivers (a must) .
The downloaded compressed file will have SP flash tool with it .
1 .Open "flash_tool.exe" under "\SP Flash Tool v5.1516" folder (with admin privileges) .
2 .Navigate to the "Download" section .
3. Click on the "Scatter-loading". Browse "MT6582_Android_scatter.txt" under "Firmware" .
4. Now this will give you a list of files to flash that comes from the "\Firmware" folder . Make sure every files load correctly to the list(location can be seen to the right of the item to be flashed) . Especially "Android" which correspond to the system.img file in the \Firmware which I think which actually solves the android system related files' problems.
5. Now Power off your phone .
'''Wait for a sec ( many people advice removing the battery for a while).
6. Now click on the Download sign in the SP flash tool window . Connect your phone with the USB cable immediately and click on the volume up or down for SP flash tool to detect your phone. If the phone gets detected SP flash tool throws some info on the left pane. Then the files will start flashing . Flashing status is provided by a yellow bar at the bottom of the window.
7. After the flash is complete a green ok popup.
8. Boot your phone to recovery and Wipe the cache partition.
9. Restart the phone.
This worked with my MACHFIVE . Wishing you luck :good:.
*Flashing always have a risk of bricking your phone. Think twice before you act . I will not take responsibility.
*Always take any errors in SP flash tool seriously and consult expert advice before continuing
*Even if you are stuck on boot if you have enabled USB debugging you can use adb pull to pull your data from memory.
Click to expand...
Click to collapse
Sir thank you so much for replying have been waiting for weeks for the solution..
1)Downloaded the files
2)Installed drivers
3)Started flash tool and loaded scatter file
4)Clicked on download
5)Powered off phone and connected via usb
6)Flashing process started
7)Flashing finished and green ring appeared!!!
8)Device booted after some time.
Thanks again for the solution :good::good::good:
Thanks for the guide.
Did anyone made custom recovery for this phone yet. If anyone has a recovery kindly share here.
Sent from my MACHFIVE using Tapatalk

unable to root Samsung A8 ( Sm-A800F )

Hi
Trying to root my Samsung galaxy A8 ( A800F ) running on Android 6.0.1 with September security patch...
Build number.. mmb29ka.800fxxu1bpi2
I have tried almost all rooting methods i.e
Kingoroot
Kingtoot
CF auto root with odin ( file available but for different build number )
Vroot
Iroot
Framaroot
And what not....
All fail ...
Plz help me with sure rooting method .
rs1981 said:
Hi
Trying to root my Samsung galaxy A8 ( A800F ) running on Android 6.0.1 with September security patch...
Build number.. mmb29ka.800fxxu1bpi2
I have tried almost all rooting methods i.e
Kingoroot
Kingtoot
CF auto root with odin ( file available but for different build number )
Vroot
Iroot
Framaroot
And what not....
All fail ...
Plz help me with sure rooting method .
Click to expand...
Click to collapse
hey there, thank you for this thread, I have same exact problem, and did try almost all the root methods that you mentioned with no luck...
please let me know if you found a way that works... I just want root supersu... don't care about recovery/kernel/xposed...
Nitrous828 said:
hey there, thank you for this thread, I have same exact problem, and did try almost all the root methods that you mentioned with no luck...
please let me know if you found a way that works... I just want root supersu... don't care about recovery/kernel/xposed...
Click to expand...
Click to collapse
Hi there
No luck so far, but you can try methods mentioned below:
1) Twrp ( 3.2.0)& Supersu metod
2) CFAuto root method
Xda don't allow new user to add external url links so please google it.
Note : Download firmware of your model from sammobile before trying any mehod , incase you soft brick your mobile it will help you to revive it.
You can mail me @
[email protected]
rs1981 said:
Hi there
No luck so far, but you can try methods mentioned below:
1) Twrp ( 3.2.0)& Supersu metod
2) CFAuto root method
Xda don't allow new user to add external url links so please google it.
Note : Download firmware of your model from sammobile before trying any mehod , incase you soft brick your mobile it will help you to revive it.
You can mail me @
[email protected]
Click to expand...
Click to collapse
autoroot stuck at A8 boot screen with red recovery not se enforcing error....
and I cant find TWRP download page for A800F can you please PM the link to me? thanks
So I finally managed to root A800F 6.0.1 thanks to @rs1981
Link for TWRP: http://www.4shared.com/get/oUigxM-6ba/TWRP_302-0.html
Downloaded supersu from:
Http://viid.me/qqB1fh
1. Make sure usb debugging is on and oem unlock is on
2. copy supersu file into phone
3. Turn off phone and go into download mode (vol down+home+power)
4. Connect to pc and flash TWRP file via odine (make sure you untick autoreboot)
5. When flash passes unplug phone and hold (vol down+home+power) immediately once the screen turns black switch to (vol up+home+power) even if you see the red error keep holding and TWRP will open
6. Flash the Supersu file that you copied from TWRP and wipe delvik cache then reboot to system
Supersu should be installed and you should have root.
Thanks again @rs1981
Been trying to root A8 all yesterday with no luck... It took me 10 mins today
Sent from my SM-N910H using Tapatalk
follow this latest guide - https://forum.xda-developers.com/sa...-samsung-galaxy-a8-a800f-a800i-6-0-1-t3529327

[Q]Root LG K4 K130E with MTK

i tried KingRoot,KnigoRoot,vRoot,Root Genius,framaroot, LG One Click Root ( Both Android and pc version ) but still cant root k130e. so how can i root this device?
is this device have TWRP or other Custom Recovery for flash it and then use SuperSu.zip for root?
no ppl have solution for this? i have an k4 m160 lg device, maybe the solution is the same.
Flash only Boot.Img of other KDZ
See This link:
https://forum.xda-developers.com/an...g-k4-k120e-prerooted-stock-rom-t3545353/page5
Last Page. maybee this Helps You out.
download attachment file
https://drive.google.com/file/d/1oynYRQHgl8YpKz4U7hXl4JbbJpeaiN0o/view?usp=sharing
run SP FLASHTOOL version SP_Flash_Tool_v5.1548_Win
select MT6735M_Android_scatter_twrp.txt
and let all file by default
select download only and flash in MTk mode (turn off the phone conect usb and start flash)
after boot phone into system
reboot in recovery mode with adb reboot recovery command
install supersu.zip or magisk with twrp
all done
it tested by me in many lg k4 (k130E) 100% WORK
Hit Thanks
mosirezaei said:
download attachment file
https://drive.google.com/file/d/1oynYRQHgl8YpKz4U7hXl4JbbJpeaiN0o/view?usp=sharing
Click to expand...
Click to collapse
The link requires signing in...
Mediafire Link
CXZa said:
The link requires signing in...
Click to expand...
Click to collapse
Try This one in mediafire
http://www.mediafire.com/file/4ripfjhqs8fkt55/K130E_twrp%2Broot.rar/file
donf forget post result and hit thanks if it worked
enjoy

Categories

Resources