[Q] Help to flash Phoenix easy touch environemnt 4gb x-tab - Android Q&A, Help & Troubleshooting

Hello Everyone.
i'm new to all this programming and flashing thing but thanks to you all who gave lots of info to stat with. but problem starts when i tried all these methods and none of them worked for me . So today i'm forced to ask you about all my problems i had with my tablet.
OK so here is what i got, A "7 inch" gsm allwinner a13 x-tab from company named Phoenix easy touch environment. it has cortex a8 1.2ghz processor with mail-400mp gpu and 353mb of ram. model is 86VEBC(nuclear_evb_rtl8723au) with sun5i hardware and 10 partitions. kernel version is 3.0.8+ and Android version 4.0.4.
Problem starts when my dad came one day and told me this tablet stuck on boot logo and now its useless. so i start searching and after lot of effort found only one rom who agrees to install on it via livesuit 1.07 and 1.09. i installed that rom and started using it.
AND THEN MAIN PROBLEM STARTED.
i installed social apps plus updated some bloatware apps added by rom owner and after one hour apps start crashing. first i thought it has something to do with registry or other minor problems so factory reset it and when it did same again i flashed its rom again. But didnt get any better results as same thing happened again. so when i searched i found that 4.0.4 android has some bad habit of crashing apps without any reason so i came to this forum and few others to find out solution. i searched roms and roms of this tablet but none of them even respond to this tablet. then i heard about Cyagenmod and other roms which woks perfectly. so i read cyanogenmod thread on this forum and another forum and tried that method. first phase was successful and i installed cwm recovery and my tablet was on after installaion. but when i tried to boot into cwm recovry to install cm a13 i got stuck at boot menu. i tried method many times but still stuck at boot menu. so i flashed tablet again and then tried to make my own cwm recovery. i followed method carefully and installed busybox and gscript lite given in that thread. then i successfully made back_mt657x.sh file and added it in script. when i run it i got mkdir already exist and fer others but i ignored them as it might be not important. after 5 or more minutes when "backup complite" came i closed gscript but it said "unfortunately gscript lite has stopped". and when i checked files there were half files than mentioned and none of them was .img file. i searched and found nothing about it.so i made screenshots of gscript lite and posting it here for you all to read and tell me whats wrong and how can i install cm a13 on it with correct cwm recovery. (btw my tablet is rooted)
Thanks for your patience and precious time.
Regards,
ZinGer
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Related

[Huge Problem] - Wifi error - help needed

Hey guys,
I was asked to Burn my rom on a friends phone and i said Sure why not.
His phone was a mess, it was stuck on Software update fail use odin and wouldn't go in to download !
I managed to flash a kernel on to it and get it in to download where i flashed it with LPQ stock + A pit file because the partition's where all messed up.
The ICS booted but there was a WIFI error :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It just sits there like that...
What ive tried :
1. another stock
2. FULL wipe (including SD)
3. dif Kernel for both ICS and GB rom's (i tried 2.3.6 LB)
4. dif battery
5. no sim+ mem card
6. FXR wifi fixer - play store
7. another rom + PIT
At this point I think i need to find someone who had this before, if anyone can help please write with an idea.
CWM
yoelsd said:
Hey guys,
I was asked to Burn my rom on a friends phone and i said Sure why not.
His phone was a mess, it was stuck on Software update fail use odin and wouldn't go in to download !
I managed to flash a kernel on to it and get it in to download where i flashed it with LPQ stock + A pit file because the partition's where all messed up.
The ICS booted but there was a WIFI error :
It just sits there like that...
What ive tried :
1. another stock
2. FULL wipe (including SD)
3. dif Kernel for both ICS and GB rom's (i tried 2.3.6 LB)
4. dif battery
5. no sim+ mem card
6. FXR wifi fixer - play store
7. another rom + PIT
At this point I think i need to find someone who had this before, if anyone can help please write with an idea.
Click to expand...
Click to collapse
You must be able to flash CMW if you are able to go into download mode. Try to install the CWM and flash SOME ROM's like CM9 or AOKP. Check whether this method works.
Not a development topic. Belongs in general or Q&A.
Development section is mean to release Rom. kernels, mods, etc. Not ask questions or making threads for help. Moved to Q&A

Cyanogen 9 suddenly died - brick

I have had Cyanogen 9 running fine for a few months. About 2 weeks ago I changed the modem, but I don't think that should be the cause of my current problem (but I could always be wrong).
Out of nowhere, apps suddenly started crashing. Everything I was using gave me a crash message. Dogcatcher and Facebook, in particular. I rebooted and the phone did not get past the Cyanogen boot screen.
I've tried to re-rom it, but CWM Recovery seems to be gone too. It goes straight into download mode. I tried to flash 6.0.1.2 with Odin but nothing changes. It still puts me into download mode.
Edit: Just found this http://forum.xda-developers.com/showthread.php?t=1457458&highlight=unbrick
I'll play with that for a minute here. Fingers crossed.
In future......
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also, your device is not "bricked". Just go into download mode, flash Siyah v4 kernel, reboot into recovery and then flash rom, done!
Yes yes, I did a fair bit of searching before posting. It just so happened that very soon after posting, my searches actually turned up something! lol
Trying Siyah. Brb...
Edit: Odin does not seem to like .zip files. I'm using Odin 3.07. Do I have to change it to .tar?
More edit: OMG, nothing I'm trying is working. This is really bad timing. I need this phone RIGHT NOW. I'm sorry for being a noob, but I desperately need help.
Still editing: Ok, I've worked out that there's a difference between a CWM .zip package and a .tar Odin package. I've got Siyah 5 installed now. I just need to find a way to get the rom onto the sdcard so I can flash Cyanogen 10 (since 9 apparently doesn't work with this kernel). Normally this would be easy, but I'm traveling at the moment and don't have all my gadgets and adapters with me.
WiFi ? Lots of apps on Google Play enable WiFi transfer (from a PC or whatever). If you "don't have all your gadgets" & no access to a PC of some description with WiFi (or a card reader even), you're not fixing it.
Edit - Or...(I forgot the bleeding obvious). Download the file(s) you need directly to the phone from CM's site/whatever using WiFi somewhere (hotel/net cafe/elsewhere); will be infinitely cheaper than using a carrier's network (unless you're using your home carrier or have a good data allowance cheap data. If you're roaming this could be expensive).

Rooting "no named" Chinese tablet? rk30sdk

So hello, first of all i hope i didn't missed a forum for this question.
Basicly am interested if can root my tablet, because don't even know how to enter recovery mode.
Thank you in advance.
Sent from my rk30sdk using xda app-developers app
Hi guys,
After doing a fair bit of reading, and getting quite confused and worried about rooting my new tablet, I finally took the plunge and tried it with your script. Really worried about bricking it, but it actually worked exactly as you said - the batch file to run is called root708dcc.cmd. Root checker tells me that root access is now enabled, which is all I want (I don't want custom firmware or anything else)
For reference, my tablet is a Fusion5 Premium+ with rockchip quad core chipset.
Thank you!!
Jay
Jayb0ne said:
Hi guys,
After doing a fair bit of reading, and getting quite confused and worried about rooting my new tablet, I finally took the plunge and tried it with your script. Really worried about bricking it, but it actually worked exactly as you said - the batch file to run is called root708dcc.cmd. Root checker tells me that root access is now enabled, which is all I want (I don't want custom firmware or anything else)
For reference, my tablet is a Fusion5 Premium+ with rockchip quad core chipset.
Thank you!!
Jay
Click to expand...
Click to collapse
For those that are looking for custom rom's for the generic RK30 devices look here http://forum.xda-developers.com/showthread.php?t=2108704, Oma has done an awesome job building roms and fixes for many devices.
RK30sdk other devices
E-Boda (or Eboda) Supreme IPS x200 runs on rk30SDK board.
I post it here so that others will find it when they do a search.
Works with ideausa ct720hd
Just wanted to say thanks and to post that the root patch works great on
My new IdeaUsa CT720HD
Thanks
Tom
Used a rooting app
I rooted my Kiano Pro 10 Dual(an rk30sdk device) with some random Chinese rooting app, and surprisingly enough, it worked! I did try it on my friend's phone but it didn't work, so it might depend a little on the device. Also, the app i used installed a weird root management app that was written in the same language as the root app... I'm not exactly sure where i found the app, so i can't provide a link... But instead of using that i would suggest you used Kingo root. You just need a Windows computer, a USB cable, and drivers for your device! There are more detailed instructions on their website: (Can't put links in posts... Just google for Kingo Root )
-Sas
I have problem with my android car multimedia that has rk30sdk chip in it.
When i turn it on it says that uid is inconsistent , but i will post here pictures of system info and errors.
My question is :
Is there any way for me to root it by an aplication, and install then SuperSu, then install recovery so i can wipe it to factory reset there.
I tried factory reset in Settings but it didnt change anything.
I have pass trough usb cable from the back of dvd if that need for something.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[Q]About MT6575 usb vcom driver

Hi,Im trying to flash a custom rom for my clone i9300 (HERE).
I installed the driver but when I plug the usb to my powered off phone,the mediatek driver shows up then disappears(I dont know if that is normal or not)when the phone vibrates and charges(the big battery icon).
Then i proceed to follow instruction when flashing but the downloaded file from the link only showed boot img and recovery img,I'm afraid i might brick it so i did not proceed.
Then i found another link and DL'ed his files (HERE)
FOllowed his instruction but SPflash said use firmware upgrade,so i used firmware upgrade and this appears
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
then
i need help, i spent 2 days finding a working root method and i dont want to spend another 2 for changing the custom rom
Any help is very appreciated
RegisNex said:
Hi,Im trying to flash a custom rom for my clone i9300 (HERE).
I installed the driver but when I plug the usb to my powered off phone,the mediatek driver shows up then disappears(I dont know if that is normal or not)when the phone vibrates and charges(the big battery icon).
Then i proceed to follow instruction when flashing but the downloaded file from the link only showed boot img and recovery img,I'm afraid i might brick it so i did not proceed.
Then i found another link and DL'ed his files (HERE)
FOllowed his instruction but SPflash said use firmware upgrade,so i used firmware upgrade and this appears
then
i need help, i spent 2 days finding a working root method and i dont want to spend another 2 for changing the custom rom
Any help is very appreciated
Click to expand...
Click to collapse
ID suggest that you install the stock ROM, make it totally back to factory state, then start again by flashing custom Rom and rooting again
hopeless_guy103 said:
ID suggest that you install the stock ROM, make it totally back to factory state, then start again by flashing custom Rom and rooting again
Click to expand...
Click to collapse
It still is the stock rom,i cant seem to find a working cwm and a custom rom,then last night i cant enter recovery mode(just hangs there) and cant install google play services framework (says somethign has same user ID)

[Q] My GS3 is an impregnable wall. No rooting or flashing methods work.

Trying to delete thread. Posted in wrong forum. Moved here: http://forum.xda-developers.com/galaxy-s3-att/help/gs3-impregnable-wall-rooting-flashing-t2811864/post54055338
sirlitch said:
Hi guys. First post to the forum, been lurking for years, just registered.
I recently updated my phone with the update that Samsung kept bothering me about every 2 hours or so. And It has messed my phone up, it's slow, it drags. It doesn't even show the clock on my lock screen without thinking about it for about 10 seconds. Train wreck.
I've rooted, installed custom recovery, and loaded custom roms on my Galaxy S i9000 and on my grouper Nexus 7. I kinda get how all this works, I'm not a total newb, but with this phone I am at a dead end and i've tried everything I know, and a bunch more tricks I learned here and nothing is working.
My Phone: Samsung Galaxy S3: Canadian (Bell) version SGH-I747M, supposedly the same as the S3 AT&T,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LINK IF IMAGE WONT IMBED: https://www.dropbox.com/s/dmgw0wj59ry70f6/Screenshot_2014-07-10-10-22-46.png
I had to use zadig to replace my drivers for Heimdall
Heimdall will sucessfully flash clockwork recovery, but it refuses to install my CM rom. I haven't tried any other roms, but from what I've read in the forum here, it doesn't seem to matter what rom you use, it just wont do it.
I get Assert, bootloader errors when trying to install from zip in Clockwork Recovery. tried the fix here: http://forum.xda-developers.com/showthread.php?p=41503727
and it does not work. Odin just says "FAILED" right away.
I thought maybe if I just rooted the phone first, I could at least flash a custom recovery and not have it over written everytime I boot.
I tried CF-AutoRoot, Odin says success, but nothing changes on my phone.
I tried OneClickRoot which worked wonders on my GS i9000 back in the day. No success.
I have tried CM Installer to do it automated, It says success, but no change.
People have reported that Knox may be the problem, but as far as I can tell I don't have it on my phone.
I've been working on this for a day and a half and all I've managed to do is factory reset my phone about 12 times. I need help.. I don't know what to do. Has anybody managed to root their phone or install a custom recovery or rom with a GS3 running 4.4?
Click to expand...
Click to collapse
Wrong forum myfriend post your question here >> http://forum.xda-developers.com/galaxy-s3-att <<

Categories

Resources