this guide is a compilation of the modding thanks to everybody works for this Smartphone:victory:
i'm not a developer but i tested all and they work
lg g2 mini It's the little brother of Lg g2, the cousin of Lg g3 and g3s, the Uncle of the brothers Optimus.
SECRET MENU
tap this sequence in the dialer
3845#*620#( this sequence is for the european mode; for other device change "620" with the number of the model, for exemple 618)
ROOT-UNROOT
to root the device use (this root method is tested with the lg d620r)
towelroot apk
https://towelroot.com/
Another useful tool after root is busybox
https://play.google.com/store/apps/details?id=stericson.busybox&hl=it
superuser
https://play.google.com/store/apps/details?id=com.noshufou.android.su
to unroot the device we can use
Universal Unroot
https://play.google.com/store/apps/details?id=com.universal.unroot&hl=it
or simple reflash the original lg rom
RETURN STOCK :AN USER FRIENDLY GUIDE
to return stock we need
- drivers http://oceanhost.eu/ed0bnrnghgef/LGUnitedMobileDriver_S51MAN312AP22_ML_WHQL_Ver_3.12.3.exe.htm
- lg flash tool (a software similar an Odin)http://oceanhost.eu/mipqojfvv9ti/LG_Flash_Tool_2014.zip.html
- a Run Time library (if you have problem with install or play lg flash tool) http://oceanhost.eu/mipqojfvv9ti/LG_Flash_Tool_2014.zip.html
- the stock rom http://lg-firmware-rom.com/ ( go here and use your Imei which is inside your lg g2 mini box or obtainable typing *#06# from your Dialer). The stock Rom is big (1 gb approximately)
this is the Euopean stock no brand rom (only d620r)
firmware: D62010g_00
https://drive.google.com/file/d/0B5GaDwb0xUaWQXNMRGVEQlhUc1k/view?usp=sharing
download and install drivers
download and unpack in a folder LG FLAH TOOL
open LG FLASH TOOL as administrator
where is written "Select KDZ file" put the your stock rom
if you want only reflash the stock rom , choose "Normal flash" , otherwise if you want to make no brand , choose "CSE flash"
and tap "START"
choose your Country and language
connect your device in DOWNLOAD MODE ( insert usb cable holding the + volume button; the device is off)
click retry and Wait Until the end ( IF you Choise CSE Flash ,after the flash all user data will be erased!)
IF THE DEVICE IS BLOCKED IN BOOTLOOP AFTER THE PROCESS, SWITCH OFF , AND SWITCH ON THE DEVICE HOLDING THE POWER BUTTON AND THE - VOLUME BUTTON; WHEN APPEAR THE LG LOGO , LEAVE THE BUTTONS FOR A SECOND AND HOLD THEM AGAIN. DO AN HARD RESET AND REBOOT(after the hard Factory reset , all data will be ERASED!)
UNLOCK BOOTLOADER: NOOB GUIDE
WARNING!:this method work only on D620r!
to unlock bootloader we need
- a terminal apk https://play.google.com/store/apps/details?id=jackpal.androidterm
- aboot.img modified by ZAAAP http://forum.xda-developers.com/g2-mini/development/bootloader-unlock-t2827748
Open terminal,
write
su
dd if=/dev/block/platform/msm_sdcc.1/by-name/aboot of=/sdcard/aboot.img
so, make a backup of the file aboot.img and replace it with aboot4.img in the sdcard folder.
write
dd if=/sdcard/aboot4.img of=/dev/block/platform/msm_sdcc.1/by-name/aboot
reboot the device with the command
reboot
We can also use adb to unlock the device by pc
https://www.youtube.com/watch?v=8aRrmxCOnQ0
INSTALL CUSTOM RECOVERY D620R
to install recovery we need
- custom recovery http://forum.xda-developers.com/g2-mini/development/recovery-testing-lg-g2-mini-d620-t2835276
- an app to flash zip
rashr https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
flashify https://play.google.com/store/apps/details?id=com.cgollner.flashify
put inside the storage memory the recovery, install the app,
flash the recovery and reboot
INSTALL CUSTOM ROM? D620R Only
download a rom and flash it
cyanogenmod( camera, vibration to fix )
http://forum.xda-developers.com/g2-...cm-11-unofficial-d620-to-test-moment-t2852497
pacrom mod( it's based on cyanogenmod rom :silly
http://forum.xda-developers.com/g2-mini/development/rom-pac-rom-lg-g2-mini-d620-alpha-t2876820
BACKUP STOCK APP AND SOUND
this are all apps of the rom (system apps + sounds of system)
https://www.mediafire.com/folder/lxef2ds430f88/lg_app
Consider the below constructive criticism. No offence meant
dandundan said:
ROOT-UNROOT
to root the device use
towelroot apk
https://towelroot.com/
Click to expand...
Click to collapse
You need to mention LG RCT.
This doesn't work for all models / firmwares.
RETURN STOCK :AN USER FRIENDLY GUIDE
to return stock we need
- drivers http://oceanhost.eu/ed0bnrnghgef/LGUnitedMobileDriver_S51MAN312AP22_ML_WHQL_Ver_3.12.3.exe.htm
- lg flash tool (a software similar an Odin)http://oceanhost.eu/mipqojfvv9ti/LG_Flash_Tool_2014.zip.html
- a Run Time library (if you have problem with install or play lg flash tool) http://oceanhost.eu/mipqojfvv9ti/LG_Flash_Tool_2014.zip.html
- the stock rom http://lg-firmware-rom.com/ ( go here and use your Imei which is inside your lg g2 mini box or obtainable typing *#06# from your Dialer). The stock Rom is big (1 gb approximately)
this is the Euopean stock no brand rom (only d620r)
https://drive.google.com/file/d/0B5GaDwb0xUaWQXNMRGVEQlhUc1k/view?usp=sharing
Click to expand...
Click to collapse
Which firmware version is this?
download and install drivers
download and unpack in a folder LG FLAH TOOL
open LG FLASH TOOL as administrator
where is written "Select KDZ file" put the your stock rom
if you want only reflash the stock rom , choose "Normal flash" , otherwise if you want to make no brand , choose "CSE flash"
and tap "START"
choose your Country and language
connect your device in DOWNLOAD MODE ( insert usb cable holding the + volume button; the device is off)
click retry and Wait Until the end
IF THE DEVICE IS BLOCKED IN BOOTLOOP AFTER THE PROCESS, SWITCH OFF , AND SWITCH ON THE DEVICE HOLDING THE POWER BUTTON AND THE - VOLUME BUTTON; WHEN APPEAR THE LG LOGO , LEAVE THE BUTTONS FOR A SECOND AND HOLD THEM AGAIN. DO AN HARD RESET AND REBOOT
Click to expand...
Click to collapse
You should mention that the hard reset will delete all user data.
UNLOCK BOOTLOADER: NOOB GUIDE
Click to expand...
Click to collapse
You should mention that this is dangerous.
And only for D620R (the aboot by @Zaaap72 )
to unlock bootloader we need
- a terminal apk https://play.google.com/store/apps/details?id=jackpal.androidterm
- aboot.img modified by ZAAAP http://forum.xda-developers.com/g2-mini/development/bootloader-unlock-t2827748
Open terminal,
write
su
mount -o rw,remount -t ext3 /dev/block/mmcblk1p21 /system
Click to expand...
Click to collapse
Why mount /system RW?
dd if=/dev/block/platform/msm_sdcc.1/by-name/aboot of=/sdcard/aboot.img
so, delete the file aboot.img and replace it with aboot4.img in the sdcard folder
Click to expand...
Click to collapse
No! Keep aboot.img as backup!
BACKUP STOCK APP AND SOUND
here they are
https://www.mediafire.com/folder/lxef2ds430f88/lg_app
Click to expand...
Click to collapse
What do you mean here?
Vagelis1608 said:
Consider the below constructive criticism. No offence meant
You need to mention LG RCT.
This doesn't work for all models / firmwares.
Which firmware version is this?
You should mention that the hard reset will delete all user data.
You should mention that this is dangerous.
And only for D620R (the aboot by @Zaaap72 )
Why mount /system RW?
No! Keep aboot.img as backup!
What do you mean here?
Click to expand...
Click to collapse
You are right....i will correct all sorry
dandundan said:
You are right....i will correct all sorry
Click to expand...
Click to collapse
Your tutorial was already really good.
I just wanted to help you improve it
EDIT: Don't forget to mention the LG RCT link I gave you
Yes i understand, the angry emoticon was an error , thanks for alla
dandundan said:
Yes i understand, the angry emoticon was an error , thanks for alla
Click to expand...
Click to collapse
Oh, I just noticed that it was . I thought that it was , lol
Vagelis1608 said:
Oh, I just noticed that it was . I thought that it was , lol
Click to expand...
Click to collapse
I correct it , How is it now?
Just one thing
dandundan said:
if you want only reflash the stock rom , choose "Normal flash" , otherwise if you want to make no brand , choose "CSE flash"
and tap "START"
choose your Country and language
connect your device in DOWNLOAD MODE ( insert usb cable holding the + volume button; the device is off)
click retry and Wait Until the end ( after the flash all user data will be erased!)
IF THE DEVICE IS BLOCKED IN BOOTLOOP AFTER THE PROCESS, SWITCH OFF , AND SWITCH ON THE DEVICE HOLDING THE POWER BUTTON AND THE - VOLUME BUTTON; WHEN APPEAR THE LG LOGO , LEAVE THE BUTTONS FOR A SECOND AND HOLD THEM AGAIN. DO AN HARD RESET AND REBOOT(after the hard reset , all dta will be ERASED!)
Click to expand...
Click to collapse
"Normal Flash" will not erase user data.
"CSE Flash" & Hard (Factory) Reset will erase all user data.
perfect informations for our g2 mini.
can I use this guide for my d620? (not d620r) I need unbranded stock rom please...
dandundan said:
this guide is a compilation of the modding thanks to everybody works for this Smartphone:victory:
i'm not a developer but i tested all and they work
lg g2 mini It's the little brother of Lg g2, the cousin of Lg g3 and g3s, the Uncle of the brothers Optimus.
SECRET MENU
tap this sequence in the dialer
3845#*620#( this sequence is for the european mode; for other device change "620" with the number of the model, for exemple 618)
ROOT-UNROOT
to root the device use (this root method is tested with the lg d620r)
towelroot apk
https://towelroot.com/
Another useful tool after root is busybox
https://play.google.com/store/apps/details?id=stericson.busybox&hl=it
superuser
https://play.google.com/store/apps/details?id=com.noshufou.android.su
to unroot the device we can use
Universal Unroot
https://play.google.com/store/apps/details?id=com.universal.unroot&hl=it
or simple reflash the original lg rom
RETURN STOCK :AN USER FRIENDLY GUIDE
to return stock we need
- drivers http://oceanhost.eu/ed0bnrnghgef/LGUnitedMobileDriver_S51MAN312AP22_ML_WHQL_Ver_3.12.3.exe.htm
- lg flash tool (a software similar an Odin)http://oceanhost.eu/mipqojfvv9ti/LG_Flash_Tool_2014.zip.html
- a Run Time library (if you have problem with install or play lg flash tool) http://oceanhost.eu/mipqojfvv9ti/LG_Flash_Tool_2014.zip.html
- the stock rom http://lg-firmware-rom.com/ ( go here and use your Imei which is inside your lg g2 mini box or obtainable typing *#06# from your Dialer). The stock Rom is big (1 gb approximately)
this is the Euopean stock no brand rom (only d620r)
firmware: D62010g_00
https://drive.google.com/file/d/0B5GaDwb0xUaWQXNMRGVEQlhUc1k/view?usp=sharing
download and install drivers
download and unpack in a folder LG FLAH TOOL
open LG FLASH TOOL as administrator
where is written "Select KDZ file" put the your stock rom
if you want only reflash the stock rom , choose "Normal flash" , otherwise if you want to make no brand , choose "CSE flash"
and tap "START"
choose your Country and language
connect your device in DOWNLOAD MODE ( insert usb cable holding the + volume button; the device is off)
click retry and Wait Until the end ( IF you Choise CSE Flash ,after the flash all user data will be erased!)
IF THE DEVICE IS BLOCKED IN BOOTLOOP AFTER THE PROCESS, SWITCH OFF , AND SWITCH ON THE DEVICE HOLDING THE POWER BUTTON AND THE - VOLUME BUTTON; WHEN APPEAR THE LG LOGO , LEAVE THE BUTTONS FOR A SECOND AND HOLD THEM AGAIN. DO AN HARD RESET AND REBOOT(after the hard Factory reset , all data will be ERASED!)
UNLOCK BOOTLOADER: NOOB GUIDE
WARNING!:this method work only on D620r!
to unlock bootloader we need
- a terminal apk https://play.google.com/store/apps/details?id=jackpal.androidterm
- aboot.img modified by ZAAAP http://forum.xda-developers.com/g2-mini/development/bootloader-unlock-t2827748
Open terminal,
write
su
dd if=/dev/block/platform/msm_sdcc.1/by-name/aboot of=/sdcard/aboot.img
so, make a backup of the file aboot.img and replace it with aboot4.img in the sdcard folder.
write
dd if=/sdcard/aboot4.img of=/dev/block/platform/msm_sdcc.1/by-name/aboot
reboot the device with the command
reboot
We can also use adb to unlock the device by pc
https://www.youtube.com/watch?v=8aRrmxCOnQ0
INSTALL CUSTOM RECOVERY D620R
to install recovery we need
- custom recovery http://forum.xda-developers.com/g2-mini/development/recovery-testing-lg-g2-mini-d620-t2835276
- an app to flash zip
rashr https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
flashify https://play.google.com/store/apps/details?id=com.cgollner.flashify
put inside the storage memory the recovery, install the app,
flash the recovery and reboot
INSTALL CUSTOM ROM? D620R Only
download a rom and flash it
cyanogenmod( camera, vibration to fix )
http://forum.xda-developers.com/g2-...cm-11-unofficial-d620-to-test-moment-t2852497
pacrom mod( it's based on cyanogenmod rom :silly
http://forum.xda-developers.com/g2-mini/development/rom-pac-rom-lg-g2-mini-d620-alpha-t2876820
BACKUP STOCK APP AND SOUND
this are all apps of the rom (system apps + sounds of system)
https://www.mediafire.com/folder/lxef2ds430f88/lg_app
Click to expand...
Click to collapse
I can not for two days trying to help me request
http://forum.xda-developers.com/g2-mini/help/help-white-device-t2900228#post55938500
Appliance Off
But the drive to see a picture ID
I tried this again
It stops here
What's the problem, I will go crazy for two days
lock bootloader
If I flash kdz, will I have relocked bootloader? If not, how can I lock it again?
cretu01 said:
If I flash kdz, will I have relocked bootloader? If not, how can I lock it again?
Click to expand...
Click to collapse
Flashing a kdz relocks the bootloader.
You can also relock the bootloader by flashing an unmodified about.img for your model.
Sent from my GT-I5500 [CM11]
Towelroot method doesn't work on LG 620r with s/w V10H.
zpfr said:
Towelroot method doesn't work on LG 620r with s/w V10H.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=55533010
Sent from my GT-I5500 [CM11]
haimmalka said:
I can not for two days trying to help me request
http://forum.xda-developers.com/g2-mini/help/help-white-device-t2900228#post55938500
Appliance Off
But the drive to see a picture ID
I tried this again
It stops here
What's the problem, I will go crazy for two days
Click to expand...
Click to collapse
try to reinstall drivers
dandundan said:
try to reinstall drivers
Click to expand...
Click to collapse
4 days ago I just install installs
I'm desperate, I give him the day they break the head of the laboratory with
Hy, afther flash lang pack still the same i need rom with hungarian lang or Romanian.
Hi guys. I'm not really sure if i'm in the right place to ask this question but i managed easily to root, unlock bootloader and flash cwm recovery so i thought when this thread helped with all of above (and thanks for that!) maybe someone can answer me how to (and can i) do a sim unlock of d620r ?
I'm having an LG phone for the first time. Other androids i had (mostly samsung and sony) i was able to unlock quite easy finding online tutorials but with this one i'm stuck cause i don't seem to be able to find any help on google or here on xda.
Any info would be very appreciated
urosmax said:
Hi guys. I'm not really sure if i'm in the right place to ask this question but i managed easily to root, unlock bootloader and flash cwm recovery so i thought when this thread helped with all of above (and thanks for that!) maybe someone can answer me how to (and can i) do a sim unlock of d620r ?
I'm having an LG phone for the first time. Other androids i had (mostly samsung and sony) i was able to unlock quite easy finding online tutorials but with this one i'm stuck cause i don't seem to be able to find any help on google or here on xda.
Any info would be very appreciated
Click to expand...
Click to collapse
So is your device branded?
Sent from my GT-I5500 [CM11]
For Lg d625 what "type" and "phone mode" should i select?
Thanks!
Related
Hello guys, this is a Tutorial for the LG optimus L5 step for step Rooting, Installing bootloader, installing CWM and finally installing ROMS.
I made this thread because i thought the other threads are a bit scattered all over the Lg optimus forums which is a bit obsecure.
So here I set up the steps! Good luck!
NOTE: THIS IS AN OLD THREAD, THE METHOD USED HERE MIGHT NOT WORK ANYMORE. IF YOU CONTINUE TO FOLLOW THIS TUTORIAL MAKE SURE YOU KNOW HOW TO FIX THINGS WHEN YOU ****ED UP, NEITHER WILL I REPLY TO ANY QUESTIONS ASKED SINCE I DON'T HAVE THE DEVICE ANYMORE
Before doing any of these things: MAKE A BACKUP!
ROOTING
First, What is rooting? (for noobs)
For rooting the L5 you need the following things: "IS11LG_SystemBackupTest.signed.apk" & a root package provided by XxXKINGMAKXxX (Attatched below)
1) go to system settings --> developer options --> turn USB debugging ON
Then, go to system settings --> Security --> allow unknown sources
2) Install SystemBackupTest.apk with a file manager then, open the app and reboot - the app should be kept open while rebooting !important!
when the phone is completely rebooted, change your mobile connection mode to “Charge Only Mode”, then reconnect the cable.
4) Run root.bat from the root package, your phone will reboot and it will be rooted!
UNLOCKING BOOTLOADER
For all E617g owners, go to thishttp://forum.xda-developers.com/showthread.php?t=2392762 thread.
You need to install bootloader if you want to continue with the next steps.
Its very important to choose the right unlock file, else you will get bootloops!
5) if you got E610/E612g, download emmc_appsboot for E610
if you got E612, download emmc_appsboot for E612
if you got E615, download emmc_appsboot for E615
next, install terminal emulator from google play unrar &
copy emmc_appsboot.bin to your internal SD card.
then, open up terminal emulator and type in:
su
[*] dd if=/sdcard/emmc_appsboot.bin of=/dev/block/mmcblk0p5
[*] reboot
INSTALLING CLOCK WORK MOD
6) Download "recovery.img" and copy it to your internal SD card.
(there is a special recovery img for the E615 - look in the attatchments)
7) Type in terminal emulator:
su
dd if=/dev/block/mmcblk0p17 of=/sdcard/recovery-backup.img (optional - makes a back-up)
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p17
reboot recovery
If you did everything good your phone will now reboot in CWM!
If you want to go into CWM any other time: turn off your phone then, press volume down + power, when the menu lights pop up press home button for 2 seconds and you will see CWM.
ROMS
This isn't difficult at all, just download some roms (given below) and drag and drop the zip file into your external/internal sd card.
Before flashing a custom rom do a factory reset trough cwm!
Go into CWM and go to the folder where you placed your custom rom. You can navigate with the volume buttons and the power button(=enter).
Some Roms for LG optimus L5:
!Note! if you want to flash a jellybean (android 4.1.2) rom you need to flash v20 baseband first!!!
FreeL5
Acid sound Rom
CyanogenMod 10
AOSPmod
XperiaRom for l5
BRICKED?
see this thread: unbrick guide
P.S if I forgot anything/ did something wrong, tell me
Special thanks to:
- XxXKINGMAKXxX
- Ideleeuw
- The rom makers ^^
my lg optimus l5 E612 keeps rebooting itself after the media scan. i have tried to wipe the cache, the dalvik cache and a factory reset in CWM but still kept rebooting how can i fix it?? and also the software version is v10d-nov-16-2012
Did you used the right bootloader?
Sent from my LG-E610 using xda premium
Followed all the above procedure for LG E615. Touch screen won't work & boot loops.Any idea why?
oops... I forgot to add the E615 files.... i added them for you
raphaelcoder said:
Followed all the above procedure for LG E615. Touch screen won't work & boot loops.Any idea why?
Click to expand...
Click to collapse
Look the above message ^^
Regarding E612G/E612F
For everyone with E612G/E612F/E610V/E610GO, these aren't compatible with CWM/bootloader, so no CWM means no custom ROMS. You can only root your phone and thats it!
- delete this message -
dev-DaT said:
For everyone with E612G/E612F/E610V/E610GO, these aren't compatible with CWM/bootloader, so no CWM means no custom ROMS. You can only root your phone and thats it!
Click to expand...
Click to collapse
I think you should edit that ...
Just saying
Sent from my LG-E612 using xda app-developers app
Psykic said:
I think you should edit that ...
Just saying
Sent from my LG-E612 using xda app-developers app
Click to expand...
Click to collapse
Yeah true but some people reported bootloops after unlocking bootloader... But for some people it works so, i dont know ....
Sent from my LG-E610 using xda app-developers app
remove e612f
i unlocked bootloader successfully ..
flashed CWM ...
but i just can't use kdz....
For unlock bootloader for very specific models.. you should see this post
e612g should do it with e610 boot file, not the e612
Lg optimus l5 e610
HELLO
i tryes AOSP roms and cm 10. passed but wi-fi wont work and no work after v10 v20 i follow procedure step by step
BUNNDOO said:
HELLO
i tryes AOSP roms and cm 10. passed but wi-fi wont work and no work after v10 v20 i follow procedure step by step
Click to expand...
Click to collapse
You shouldnt have flashed v20 if you want cm10, also if you want to install a new rom first delete /system, /data and media /dalvik /cache, just wipe everyting from your phone then install cm10(.1).
Sent from my LG-E610 using xda app-developers app
mmmmmmmmmm
not work with jelly bean 4.1..2 v20d
AXD96 said:
not work with jelly bean 4.1..2 v20d!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
READ, The titel already says stock ICS to Customrom!!! ICS = android 4.0.3 Ice Cream Sandwich !!!
- See my other Tutorial if you want Root + CWM on 4.1.2. --> http://forum.xda-developers.com/showthread.php?t=2405357
I would like to suggest updating cwm to a newer version and avoiding the cwm v. 6.0.2.8. Look up for another newer. Recently, some of us we had problems with that version.
is there no tool like the AIO -ToolKit to just override everything for the 610? other than kdz. something that does work when the mpt driver fails to install?
dev-DaT said:
For everyone with E612G/E612F/E610V/E610GO, these aren't compatible with CWM/bootloader, so no CWM means no custom ROMS. You can only root your phone and thats it!
Click to expand...
Click to collapse
now i see why it is rebooting all the time
dev-DaT said:
Hello guys, this is a Tutorial for the LG optimus L5 step for step Rooting, Installing bootloader, installing CWM and finally installing ROMS.
I made this thread because i thought the other threads are a bit scattered all over the Lg optimus forums which is a bit obsecure.
So here I set up the steps! Good luck!
NOTE: THIS IS AN OLD THREAD, THE METHOD USED HERE MIGHT NOT WORK ANYMORE. IF YOU CONTINUE TO FOLLOW THIS TUTORIAL MAKE SURE YOU KNOW HOW TO FIX THINGS WHEN YOU ****ED UP, NEITHER WILL I REPLY TO ANY QUESTIONS ASKED SINCE I DON'T HAVE THE DEVICE ANYMORE
Before doing any of these things: MAKE A BACKUP!
ROOTING
First, What is rooting? (for noobs)
For rooting the L5 you need the following things: "IS11LG_SystemBackupTest.signed.apk" & a root package provided by XxXKINGMAKXxX (Attatched below)
1) go to system settings --> developer options --> turn USB debugging ON
Then, go to system settings --> Security --> allow unknown sources
2) Install SystemBackupTest.apk with a file manager then, open the app and reboot - the app should be kept open while rebooting !important!
when the phone is completely rebooted, change your mobile connection mode to “Charge Only Mode”, then reconnect the cable.
4) Run root.bat from the root package, your phone will reboot and it will be rooted!
UNLOCKING BOOTLOADER
For all E617g owners, go to thishttp://forum.xda-developers.com/showthread.php?t=2392762 thread.
You need to install bootloader if you want to continue with the next steps.
Its very important to choose the right unlock file, else you will get bootloops!
5) if you got E610/E612g, download emmc_appsboot for E610
if you got E612, download emmc_appsboot for E612
if you got E615, download emmc_appsboot for E615
next, install terminal emulator from google play unrar &
copy emmc_appsboot.bin to your internal SD card.
then, open up terminal emulator and type in:
su
[*] dd if=/sdcard/emmc_appsboot.bin of=/dev/block/mmcblk0p5
[*] reboot
INSTALLING CLOCK WORK MOD
6) Download "recovery.img" and copy it to your internal SD card.
(there is a special recovery img for the E615 - look in the attatchments)
7) Type in terminal emulator:
su
dd if=/dev/block/mmcblk0p17 of=/sdcard/recovery-backup.img (optional - makes a back-up)
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p17
reboot recovery
If you did everything good your phone will now reboot in CWM!
If you want to go into CWM any other time: turn off your phone then, press volume down + power, when the menu lights pop up press home button for 2 seconds and you will see CWM.
ROMS
This isn't difficult at all, just download some roms (given below) and drag and drop the zip file into your external/internal sd card.
Before flashing a custom rom do a factory reset trough cwm!
Go into CWM and go to the folder where you placed your custom rom. You can navigate with the volume buttons and the power button(=enter).
Some Roms for LG optimus L5:
!Note! if you want to flash a jellybean (android 4.1.2) rom you need to flash v20 baseband first!!!
FreeL5
Acid sound Rom
CyanogenMod 10
AOSPmod
XperiaRom for l5
BRICKED?
see this thread: unbrick guide
P.S if I forgot anything/ did something wrong, tell me
Special thanks to:
- XxXKINGMAKXxX
- Ideleeuw
- The rom makers ^^
Click to expand...
Click to collapse
I know that this is an incredibly old post, more than 6 years since the last OP edition. But, I still have my old LG Optimus LG E610 with ICS Stock ROM, in a very good shape, so I will try this just for the pleasure of doing it and play around.
Many thanks for putting together all this useful infos, OP and all!
P.S. Shame I can't add this (and other similar handsets) to My Devices List.
[DEV]TWRP RECOVERY FOR LG D315 F70
Warning : This operation involves risk. XDA community or me can not be held responsible for any problems
Hi everyone!
Well, Since this smartphone is somewhat forgotten in the Android community, I decided to work on it ! I unlocked the fastboot and ported TWRP Recovery for the LG F70 ! It works on the D315, for others I really don't know ... But since I did the porting myself it must be considered as an alpha version x ') The only problem is I had to use a theme for TWRP, because the default theme was too big for this phone :/ Well you might say, it is nice like that ! The themer is "z31s1g". Anyway. If some people want to test and give feedback, this is here
First, make sure your phone is rooted (you can do it with towelroot) and make sure you have the Android SDK installed, and the LG drivers.
Download my attachment and extract it on your computer.
Right now you have to activate fastboot, fastboot is hidden behind the download mode, so backup your download mode :
Code:
adb shell
su
dd if=/dev/block/platform/msm_sdcc.1/by-name/laf of=/sdcard/laf.img.
And now set zero the download mode with this command, then reboot :
Code:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/laf
adb reboot
Now you have replaced the download mode by fastboot. Let's start fastboot, to do so, you have to turn off your phone, hold Vol+ button and plug in the USB cable.
On the console, do this command to check if phone is connected and detected.
Code:
fastboot devices
There should be a random sequence of numbers, and "fastboot" displayed.
So now we will proceed to flash the recovery with this command :
Code:
fastboot flash recovery c:\PathToTheRecoveryImage\recovery.img
Then reboot with this command :
Code:
fastboot reboot
Done ! This is my first tutorial in english... I'm a 17 years old french user, excuse me if my english is bad x)
************************************************************************************
UPDATE HERE, BOOTLOADER UNLOCKED AND NEW RECOVERY
************************************************************************************
Thanks in advance if someone want to test it and post a feedback, I will make a little list of what's working / not working (I already tested it, I didn't see nothing right now Enjoy !
KuroHaki said:
TWRP RECOVERY FOR LG D315 F70
Warning : This operation involves risk. XDA community or me can not be held responsible for any problems
Hi everyone!
Well, Since this smartphone is somewhat forgotten in the Android community, I decided to work on it ! I unlocked the fastboot and ported TWRP Recovery for the LG F70 ! It works on the D315, for others I really don't know ... But since I did the porting myself it must be considered as an alpha version x ') The only problem is I had to use a theme for TWRP, because the default theme was too big for this phone :/ Well you might say, it is nice like that ! The themer is "z31s1g". Anyway. If some people want to test and give feedback, this is here
First, make sure your phone is rooted (you can do it with towelroot) and make sure you have the Android SDK installed, and the LG drivers.
Download my attachment and extract it on your computer.
Right now you have to activate fastboot, fastboot is hidden behind the download mode, so backup your download mode :
Code:
adb shell
su
dd if=/dev/block/platform/msm_sdcc.1/by-name/laf of=/sdcard/laf.img.
And now set zero the download mode with this command, then reboot :
Code:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/laf
adb reboot
Now you have replaced the download mode by fastboot. Let's start fastboot, to do so, you have to turn off your phone, hold Vol+ button and plug in the USB cable.
On the console, do this command to check if phone is connected and detected.
Code:
fastboot devices
There should be a random sequence of numbers, and "fastboot" displayed.
So now we will proceed to flash the recovery with this command :
Code:
fastboot flash recovery c:\PathToTheRecoveryImage\recovery.img
Then reboot with this command :
Code:
fastboot reboot
Done ! This is my first tutorial in english... I'm a 17 years old french user, excuse me if my english is bad x)
Thanks in advance if someone want to test it and post a feedback, I will make a little list of what's working / not working (I already tested it, I didn't see nothing right now Enjoy !
Click to expand...
Click to collapse
Hello, it seems that only me and you have this phone. So, I'd like to root my phone, do you think that I could use towelroot without risk?
I think I'll try your guide too... after root
Thanks in advance
Yes, you can use Towelroot, but for the recovery, remember it's only a first test, and I don't know if the bootloader is locked... but the recovery seems to work
good. towelroot works well and I have no problem since now. do you think I could install gravity box in this phone with stock rom? how can I unroot this phone? thanks in advance
It was not able to enter the Fastboot
Hi. I thank you TWRP who porting. I have not imagined and think you made using the TWRP in the F70 model. However Execution has not been in the loading screen of the download mode it is not possible that you have used the dd if = / dev / zero of = ~~ command as described in your article, but to enter the fastboot.
How can I do? I use F370s model.
I'm sorry. I use google translations...
d315
hi. also have the korean version of this phone. can i use international rom on this phone so that mine test isnt korean language?
---------- Post added at 03:47 PM ---------- Previous post was at 03:41 PM ----------
can someone confirm this
seventivi.blogspot.com/2014/10/upgradeupdate-lg-f70-d315-to-50-lollipop.html
mrteejay said:
hi. also have the korean version of this phone. can i use international rom on this phone so that mine test isnt korean language?
Click to expand...
Click to collapse
I think yes. I've Singapore's version of D315 and flashed a Hungarian D315 rom with no problem.
You can download some ROMs from 4pda F70 Flash thread.
rom
Thats freakin awesome. Can you guide me on how u accomplished flashing ur phone. So far im only rooted
mrteejay said:
Thats freakin awesome. Can you guide me on how u accomplished flashing ur phone. So far im only rooted
Click to expand...
Click to collapse
I've used this tool (this tool has a tutorial on its page). After flashing you have to root again.
Duble check to be sure that you have lg d315 model and downloaded lg d315 firmware!
This is the model of my phone. It didnt say it is d315. But i read it its the same only it is the korean version. See attached image. Should i go continue flash?and what is the consequence if i use different rom for my phone?
mrteejay said:
This is the model of my phone. It didnt say it is d315. But i read it its the same only it is the korean version. See attached image. Should i go continue flash?and what is the consequence if i use different rom for my phone?
Click to expand...
Click to collapse
There is no guarantee for a successful firmware flash.
What if flashing failed? Can i revert back?
mrteejay said:
What if flashing failed? Can i revert back?
Click to expand...
Click to collapse
If flashing failed you will have to disassemble a bootloader and to correct security checks inside.
So, It's possible but VERY hard.
Hi all ! I just worked on this phone night and day x)
I just unlocked the bootloader, and made a CWM port (I personnally prefer CWM x) ) And i'm working to make a port of Cyanogenmod 11, but i'm only 17 y-o and... Well, that's too hard for me x) I've compiled it, with bin blobs, and other stuff, all the config files, etc, but it's not working YET x) (If anyone want to help me I can share my project...) Well :
/!\ For Recovery to work, you MUST unlock the bootloader by this method, this is very simple (Thanks to Zaaap72) /!\
CWM 6.0.5.0 : CWM 6.0.5.0.img
Method to unlock bootloader (not by me) : http://forum.xda-developers.com/g2-mini/development/bootloader-unlock-t2827748
The G2 Mini (D620) Has the same architecture as the F70, I mean Qualcomm msm8226, Snapdragon400, Same amount of ram, etc, BUT, not the same screen... And I'm trying to adapt the cutom kernel, and sources of D620 CM11 for my F70 x) Again, If anyone can/want help me
(Remember that the recoveries I made are in beta-test, this is my first try, and I will update them in the future, If you find any bugs, tell me, or modify the .img by yourself with AIK and upload the image for me Thanks !)
Have a nice day guys
KuroHaki, what version of device (D315/F370), device region and firmware (v10a/b/c...) bootloader did you use to unlock? Zaaap72's unlock method is very risky and unstable solution. The best solution is on 4pda, Anyway you're done!
You can try to make a recovery image with LG-L70 recovery binary and F70 kernel. It may work, I've made like that before with MTK devices.
I have a v10b D315, and I used the 4-bytes method, on aboot and abootb, it awesomely worked I played with chance on this, and it worked x) If anyone want to test it on another firmware/model of F70... And for the Image, I don't need recovery, I need a Kernel that can boot Cyanogenmod, because the LG sources make my phone bootloop on the LG first logo... I tried with Zaaap port of Quarx sources, with no success... Kernel compilation is very hard for me, I had many errors with Drivers on Quarx source, I changed the files with errors with files from LG source, and It compiled, but not worked... I don't understand why... Well, if anyone have a solution for this kernel... x)
I am the owner LG F70 phones and watches this topic for a long time but did not move anything, whether it was by the opportunity to do any ROM for this device ?
Wow! Thanks for this Recovery!!!! Was looking a while for twrp on the F70! :good:
I did flash the recovery successfully with the method in the OP. However, when I reboot to recovery (adb reboot recovery) it failed to boot TWRP - a screen showed 'secure boot error' then there were was a dump screen with lots of drives mounted to my linux pc.
This is likely because I didn't unlock the boot loader right? However, the method provided to unlock looks a bit too risky - especially since I dont have a recovery to restore if the stuff break the system. Anyway, thanks for this!
@up
I don't think so the unlock bootloader it's dangerous. I have done files aboot and abootb so i can send you.
Russian LG bootloader guru Andrew-New from 4pda has made a patched bootloader for lg d315 from v10b aboot.bin as I've requested him.
Hello,
Many people have problem with bricked device because they complied many diffrent tutorials and broke their G2.
I will explain you how to root stock rom/update bootloader and back to stock via lg flashtool.
Perform operations step by step
Okay, so first thing - ROOT STOCK LG ROM.
1. Stump ROOT (Without usb cable, working with 20h ROM)
Stump Root v1.2 (Newest version)
-->> Download Stump ROOT v1.2 <<--
Go to settings>general>security and check "Unknown Sources" to install external APKs.
Now install Stump ROOT app from download link. (In installation progress Android will ask you for install permisions because this integrate in system code. OFC ACCEPT)
Open Stump ROOT and press GRIND, then wait sec and press BruteForce, after 1-2 min your device will restart and now u got ROOT, u need install -->> SuperSU <<-- from market.
2. Install TWRP for your device. (Autorec)
-->> Download AUTOREC <<--
Okay, it's easiest step, just install Autorec application (Be sure it's for your model in file name!)
Open, accept and flash.
This way will downgrade your bootloader and kernel. After device reboot u have already ROOT and TWRP.
Now u can update first your TWRP to newest 2.8.5.1
-->> HERE THEARD WITH NEW TWRP <<--
If you download new TWRP, then u can easy flash it via -->> Flashify <<-- app from market. There select recovery>zip and select your new TWRP, it will reboot device to recovery and flash. (BE SURE IT'S FOR YOUR D802 MODEL!!)
3. Update bootloader. (IMPORTANT!!! U ALWAYS NEED UPDATE BOOTLOADER WITH VERSION ROM WHAT YOU ALREADY HAVE, IF YOUR ROM V20H, USE 20H BOOTLOADER, IF YOU HAVE 20D, THEN USE 20D BOOTLOADER OR UPDATE YOUR DEVICE TO 20H!!)
Now u need becareful, because it is easy way to brick device if you will not perform tutorial.
-->> Download v20h bootloader <<--
Download bootloader to your memory storage in device, and open flashify, press Menu button and Reboot Recovery, when it will reboot to TWRP, press INSTALL and select bootloader v20h zip file in path you downloaded it.
Now reboot device and Enjoy ROOTED device with newest bumped TWRP and newest bootloader.. AND NO BRICK )
Enjoy your powerfull device.
I will update theard with new steps like install kernels, back to stock step by step, easiest way to secure your device.
I know there are many tutorials, but we have still many people on XDA with problems like QS_BULK device, 9008, secure verify problem etc etc. So this is way to bypass every danger things.
Im not creator of any used in this tutorial mods, i just complied few theards to few easy steps
Credits:
Dorimanx
Cloudyfa
blastagator
jcase
Codefire Team
Hi good Job!
I have Two questions.
Can i upgrade my twrp Version with flashing the zip file in twrp?
Which Bootloader version use cyanogenmod 12?
Thank you!
A few additional info for the D802 variant:
-You don't NEED to change boot loader if you're fully on stock unless:
--You plan to use AOSP Lollipop
--You use any JB based ROMs (they should say in their respective threads for the D802)
-If you stick with the KK boot loader, only flash BUMPed flashables (they should state if they use this method)
-I recommend to use Blastagator's TWRP as it has thermal protection that stock TWRP doesn't have
-Only flash ROMs/any other flashables while the phone is cool
-Most ROMs can use the KK modem unless stated otherwise
Correct me on any misunderstood/incorrect information
---------- Post added at 10:56 AM ---------- Previous post was at 10:48 AM ----------
exxilee said:
Hi good Job!
I have Two questions.
Can i upgrade my twrp Version with flashing the zip file in twrp?
Which Bootloader version use cyanogenmod 12?
Thank you!
Click to expand...
Click to collapse
1. You should be able to
2. You should be on the JB boot loader, we don't have the 12B one, that's for another variant
exxilee said:
Hi good Job!
I have Two questions.
Can i upgrade my twrp Version with flashing the zip file in twrp?
Which Bootloader version use cyanogenmod 12?
Thank you!
Click to expand...
Click to collapse
Yes. If you installed AutoRec and u are able to open recovery, you can flash via older twrp. It is no problem
goodguy25 said:
A few additional info for the D802 variant:
-You don't NEED to change boot loader if you're fully on stock unless:
--You plan to use AOSP Lollipop
--You use any JB based ROMs (they should say in their respective threads for the D802)
-If you stick with the KK boot loader, only flash BUMPed flashables (they should state if they use this method)
-I recommend to use Blastagator's TWRP as it has thermal protection that stock TWRP doesn't have
-Only flash ROMs/any other flashables while the phone is cool
-Most ROMs can use the KK modem unless stated otherwise
Correct me on any misunderstood/incorrect information
---------- Post added at 10:56 AM ---------- Previous post was at 10:48 AM ----------
1. You should be able to
2. You should be on the JB boot loader, we don't have the 12B one, that's for another variant
Click to expand...
Click to collapse
I just wrote this tutorial for Stock, and it's always good to have new stuff. It's safe with bumped twrp and it shouldn't make any problem with device.
Thank you guys!
So i dont need to change my Bootloader to Flash cm12?
Installed twrp via autorec and im on Stock kk.
exxilee said:
Thank you guys!
So i dont need to change my Bootloader to Flash cm12?
Installed twrp via autorec and im on Stock kk.
Click to expand...
Click to collapse
U no need, no matter u have JB or KK bootloader if you use CM12 or other AOSP ROMs
Ganjax said:
I just wrote this tutorial for Stock, and it's always good to have new stuff. It's safe with bumped twrp and it shouldn't make any problem with device.
Click to expand...
Click to collapse
Ok, good. I liked your tutorial, pretty informative.
Hello, i'm stuck at this step :
"3. Update bootloader. (IMPORTANT!!! U ALWAYS NEED UPDATE BOOTLOADER WITH VERSION ROM WHAT YOU ALREADY HAVE, IF YOUR ROM V20H, USE 20H BOOTLOADER, IF YOU HAVE 20D, THEN USE 20D BOOTLOADER OR UPDATE YOUR DEVICE TO 20H!!)
Now u need becareful, because it is easy way to brick device if you will not perform tutorial.
-->> Download v20h bootloader <<--
Download bootloader to your memory storage in device, and open flashify, press Menu button and Reboot Recovery, when it will reboot to TWRP, press INSTALL and select bootloader v20h zip file in path you downloaded it. "
Edit : i flashed the rom without KK bootloader and it worked
-> I Was on 20H. I rooted, installed twrp, updated twrp. I've flashed 20d KK bootloader and now, secure booting error
I have access to download mode. What can i do do boot normally ? (i know i could probably flash a kdz but i don't really want to)
i cannot enter into the twrp by pressing the vol down + power, it just ask me whether i want to format, this means i still do not have twrp ?
coc014 said:
Hello, i'm stuck at this step :
"3. Update bootloader. (IMPORTANT!!! U ALWAYS NEED UPDATE BOOTLOADER WITH VERSION ROM WHAT YOU ALREADY HAVE, IF YOUR ROM V20H, USE 20H BOOTLOADER, IF YOU HAVE 20D, THEN USE 20D BOOTLOADER OR UPDATE YOUR DEVICE TO 20H!!)
Now u need becareful, because it is easy way to brick device if you will not perform tutorial.
-->> Download v20h bootloader <<--
Download bootloader to your memory storage in device, and open flashify, press Menu button and Reboot Recovery, when it will reboot to TWRP, press INSTALL and select bootloader v20h zip file in path you downloaded it. "
Edit : i flashed the rom without KK bootloader and it worked
-> I Was on 20H. I rooted, installed twrp, updated twrp. I've flashed 20d KK bootloader and now, secure booting error
I have access to download mode. What can i do do boot normally ? (i know i could probably flash a kdz but i don't really want to)
Click to expand...
Click to collapse
Well if you cant enter your recovery or system then you have to flash kdz.
chris7617 said:
i cannot enter into the twrp by pressing the vol down + power, it just ask me whether i want to format, this means i still do not have twrp ?
Click to expand...
Click to collapse
You already flashed TWRP right? If so then you need to confirm it twice with the power button. It says like format data/factory reset but it will boot into the custom recovery.
please help me...i have a lg g2 d802 32gb model ..its a traded phone...when i got the phone it was running 4.4.2 kitkat the phone was rooted bt there was no suprrueser app i installed the app and then i flashed recovery with autorec now whenever i open my data or wifi and use my phone for some minutes my screen becomes unresponsive is it due to the jellybean bootloader that the autorec installed or something else please help me...
Recovery combo gone
The thread seems like dead now, but maybe I get help .
I flashed 20H and now there is the recovery combo, when I try pwr + volume down it simply reboots . The recovery is instaled, but I only can access it from software (that now is corrupted, so, soft brick).
Wrong combo
chris7617 said:
i cannot enter into the twrp by pressing the vol down + power, it just ask me whether i want to format, this means i still do not have twrp ?
Click to expand...
Click to collapse
You're not soft bricked, it's just that key combo changes in 20H, new combo to enter recovery is vol down + power key, As lg logo appears, release keys and press vol up + vol down and you can easily access twrp
and i ran intro bootloop.. help!
I'll update theard soon to aosp/lollipop support, bootstacks explains etc.
Wysłane z mojego LG-D802
Thank for @genisys
This theme mod for H818p V20c
Link (file img ) https://www.fshare.vn/file/84LBLRR9ODKF
link tool and GUIDE ( "huong dan flash img" in folder) : https://www.fshare.vn/file/84LBLRR9ODKF
Video: https://youtu.be/isBG3gzdcG8
Install the software LG UP, full driver as Uprom
The necessary files: rom.kdz (here is the v6.0).Copy file to phone memory system1.img (phone memory - the root not in any folder at all). Connect to a computer g4.n LGUP select upgrade (selected refurbish but also in case of withdrawal cable will not be reformatted g4 kip then have to start again). Wait for the machine reboot wait until the COM port appears on g4 (xx) - depending on plant- then immediately withdraw cable from the computer or g4. Off LGUP then plug the computer cable. CMD CMD enabled in folder attached below. Type the command as in the guide "Send_Command.exe \\. \ COMxx" (replaced by Section xx COM port number appears on g4). Appears the "#" type in the command "Print" (to appear 1 series statement form (0) (0) (0) ... (like that). Some computer users when typing win 7 "ip" will not appear at all when it shut down CMD, run it again and type the command would be. After the command "dd if=/data/media/0/system1.img bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0" wait until they appear flashing "#" followed LEAVE typing (without appliance ).
Remove the battery cable pulled reboot and achievements
BUG: select HOME in setting is forclose
...
haian36 said:
Thank for @genisys
This theme mod for H818p V20c
Link (file img ) Update.........
Click to expand...
Click to collapse
What's your dpi value? Seems even lower than 540.
Diatomix98 said:
What's your dpi value? Seems even lower than 540.
Click to expand...
Click to collapse
Dpi=540
https://youtu.be/isBG3gzdcG8
hi . android 5.1 maybe flash this rom ? or should android 6 ?
elnino909 said:
hi . android 5.1 maybe flash this rom ? or should android 6 ?
Click to expand...
Click to collapse
you must update the rom 6.0 V20C
haian36 said:
you must update the rom 6.0 V20C
Click to expand...
Click to collapse
rom 6.0 v20c is not root and recovery for flash this rom
haian36 said:
Thank for @genisys
This theme mod for H818p V20c
Link (file img ) https://www.fshare.vn/file/84LBLRR9ODKF
Video: https://youtu.be/isBG3gzdcG8
Click to expand...
Click to collapse
how to install? just flash the .img thru LGUP?
other language available? english?
thanks
elrosid said:
how to install? just flash the .img thru LGUP?
other language available? english?
thanks
Click to expand...
Click to collapse
Flash with img
All language available
hi . flash with lgup or recovery ?
Hello
I have to flash .img file with LGUP or something? because i cant flash it via LGUP (Zip or .img)
It would be great if you put some tutorial how to flash it
Thank you so much
haian36 said:
Flash with img
All language available
Click to expand...
Click to collapse
go to rom v20c and then flash the .img thru recovery?
how about v20d is it possible?
elrosid said:
go to rom v20c and then flash the .img thru recovery?
how about v20d is it possible?
Click to expand...
Click to collapse
V20d Bluetooth forclose
Update GUIDE on #1
haian36 said:
Flash with img
All language available
Click to expand...
Click to collapse
haian36 said:
V20d Bluetooth forclose
Click to expand...
Click to collapse
haian36 said:
Update GUIDE on #1
Click to expand...
Click to collapse
i really appreciate your help for making a guide, but so sorry to say the guide itself isn't clear i cant understand.
maybe you have time to make a video tutorial? would be better.
thanks :good:
Hello
I just eant to make sure, is the tools and guide links are the same with .img link? Because link is the same. And i try to download both, is the same file
Sent from my LG-H818 using XDA-Developers mobile app
Good work
haian36 said:
Thank for @genisys
This theme mod for H818p V20c
Link (file img ) https://www.fshare.vn/file/84LBLRR9ODKF
link tool and GUIDE ( "huong dan flash img" in folder) : https://www.fshare.vn/file/84LBLRR9ODKF
Video: https://youtu.be/isBG3gzdcG8
Install the software LG UP, full driver as Uprom
The necessary files: rom.kdz (here is the v6.0).Copy file to phone memory system1.img (phone memory - the root not in any folder at all). Connect to a computer g4.n LGUP select upgrade (selected refurbish but also in case of withdrawal cable will not be reformatted g4 kip then have to start again). Wait for the machine reboot wait until the COM port appears on g4 (xx) - depending on plant- then immediately withdraw cable from the computer or g4. Off LGUP then plug the computer cable. CMD CMD enabled in folder attached below. Type the command as in the guide "Send_Command.exe \\. \ COMxx" (replaced by Section xx COM port number appears on g4). Appears the "#" type in the command "Print" (to appear 1 series statement form (0) (0) (0) ... (like that). Some computer users when typing win 7 "ip" will not appear at all when it shut down CMD, run it again and type the command would be. After the command "dd if=/data/media/0/system1.img bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0" wait until they appear flashing "#" followed LEAVE typing (without appliance ).
Remove the battery cable pulled reboot and achievements
BUG: select HOME in setting is forclose
...
Click to expand...
Click to collapse
Looks really nice!:good:
As far as installation procedure is concerned, I have read it many times, but could not understand it exactly. If i have not miss understood, the procedure should be like that
Step 1. Upgrade/downgrade to MM v20C (if it is not already installed) through LGUP!
Step 2. inject the system image as we used to do for rooting LP!
Complete Guide+V20C+LGUP
Done
Thanks for hard work:good:
QSR1 said:
Looks really nice!:good:
As far as installation procedure is concerned, I have read it many times, but could not understand it exactly. If i have not miss understood, the procedure should be like that
Step 1. Upgrade/downgrade to MM v20C (if it is not already installed) through LGUP!
Step 2. inject the system image as we used to do for rooting LP!
Complete Guide+V20C+LGUP
Done
Thanks for hard work:good:
Click to expand...
Click to collapse
have you tried the mod? i want to but still confused about the steps
QSR1 said:
Looks really nice!:good:
As far as installation procedure is concerned, I have read it many times, but could not understand it exactly. If i have not miss understood, the procedure should be like that
Step 1. Upgrade/downgrade to MM v20C (if it is not already installed) through LGUP!
Step 2. inject the system image as we used to do for rooting LP!
Complete Guide+V20C+LGUP
Done
Thanks for hard work:good:
Click to expand...
Click to collapse
elrosid said:
have you tried the mod? i want to but still confused about the steps
Click to expand...
Click to collapse
I triend injecting it like root procedure for LP. I have no luck, getting error when i send the "Print" and "dd if=/data/media/0/system1.img bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0" command
Hello everyone !
I want to go back to stock. (For warrantly)
I try to follow this thread : https://forum.xda-developers.com/lg-g5/how-to/lg-5-to-stock-t3369959
But most links don't work. (What version of LG UP should I use?)
I have a bigger problem, I cant download any KDZ file !!!
This link is not working : http://csmgdl.lgmobile.com/dn/downl...27IATRF9CA9OFE/H85010c_00_OPEN_EU_OP_0415.kdz
Can you help me please?
Thanks a lot for your help
I would also like to ask if it's possible to go back to stock without USB connection, because my port is kinda broken and I want to bring it to warranty clean.
Do you want to go back stock, relocking your bootloader ?
Because there is an easy way to go back stock.
1. You have to put your phone on USB debugging (if it not already done)
2. Reboot in bootloader, if you have minimal adb and fastboot tools, it will be easy : (you can find it there : https://forum.xda-developers.com/showthread.php?t=2317790)
2a. shift + right click on the adb and fastboot directory (where *.exe are), click on "Open Command Window Here"
2b. Once the cmd prompt is opened, "adb.exe reboot bootloader"
3. When the phone is in bootloader, on your cmd prompt, type : fastbootexe oem lock
It will relock your bootloader and wipe everything so before that, do a LG Backup on you PC or SD Card).
4. fastboot.exe reboot
5. Enable developer mode (pressing 7 times build version in about phone), go in developper options then disable OEM unlock
That's what I've done to get back my G5 full stock (you can thank me and bornheim2 in the post in this thread : https://forum.xda-developers.com/lg-g5/how-to/lock-bootloader-h850-t3505922
Thanks a lot for your answer.
I have installed the FLUENCE HD rom, and a revovery.
It will undo everything?
Thanks you.
Nope, you should do this on a stock ROM.
Did you tried to install a KDZ file in upgrade mode ? (not refurbish).
Actually I can't download the KDZ file, the link I posted above is not working.
Thanks for your answer.
You can download it from here :
H85010i_00_OPEN_EU_OP_0923.kdz for LGH850 (Marshmallow)
http://lg-firmwares.com/download-file/?fileId=3497
H85020a_00_OPEN_EU_OP_1030.kdz for LGH850 (Nougat)
http://lg-firmwares.com/download-file/?fileId=4313
I tried, and no problem
taiji_khan said:
You can download it from here :
H85010i_00_OPEN_EU_OP_0923.kdz for LGH850 (Marshmallow)
http://lg-firmwares.com/download-file/?fileId=3497
H85020a_00_OPEN_EU_OP_1030.kdz for LGH850 (Nougat)
http://lg-firmwares.com/download-file/?fileId=4313
I tried, and no problem
Click to expand...
Click to collapse
Hi,Fastboot oem lock works on both the kdz you linked?
And do you know if I can flash this kdz on a Vodafone branded H850?
Sent from my LG-H850 using Tapatalk
Tanks for your answer.
What rom should I use?
Other question : What do '10i' stands for?
Thanks.
taiji_khan said:
You can download it from here :
H85010i_00_OPEN_EU_OP_0923.kdz for LGH850 (Marshmallow)
http://lg-firmwares.com/download-file/?fileId=3497
H85020a_00_OPEN_EU_OP_1030.kdz for LGH850 (Nougat)
http://lg-firmwares.com/download-file/?fileId=4313
I tried, and no problem
Click to expand...
Click to collapse
Thanks to you I succeed !!
Thanks a lot for your help, it went well.
Exept i had troubles with LG UP, I had to replace a DLL file. Then I had to manually install google ADB drivers.
I'll post exactly what I did later today.
Jongla said:
Hi,Fastboot oem lock works on both the kdz you linked?
And do you know if I can flash this kdz on a Vodafone branded H850?
Click to expand...
Click to collapse
I relock my bootloader after Nougat update but I suppose you can relock on both.
When you flash a KDZ file, it will flash the system.img so it will erase your Vodafone version I guess. The difference between update and refurbish is that update do not erase your data but you can perform an update then a reset factory and wipe your data from setup menu in MM or Nougat. (if someone can tell me if I'm wrong or not )
maxander said:
What rom should I use?
Other question : What do '10i' stands for?
Click to expand...
Click to collapse
10i is is last MM version, it is just the build version, the other is Nougat. You can install the version you prefer
maxander said:
Thanks to you I succeed !!
Thanks a lot for your help, it went well.
Exept i had troubles with LG UP, I had to replace a DLL file. Then I had to manually install google ADB drivers.
I'll post exactly what I did later today.
Click to expand...
Click to collapse
Great news :highfive:
taiji_khan said:
I relock my bootloader after Nougat update but I suppose you can relock on both.
The difference between update and refurbish is that update do not erase your data but you can perform an update then a reset factory and wipe your data from setup menu in MM or Nougat. (if someone can tell me if I'm wrong or not )
Click to expand...
Click to collapse
I couldn't refurbish with the KDZ you gave me. Apparently they are not compatible with refurbish mode.
taiji_khan said:
Do you want to go back stock, relocking your bootloader ?
Because there is an easy way to go back stock.
1. You have to put your phone on USB debugging (if it not already done)
2. Reboot in bootloader, if you have minimal adb and fastboot tools, it will be easy : (you can find it there : https://forum.xda-developers.com/showthread.php?t=2317790)
2a. shift + right click on the adb and fastboot directory (where *.exe are), click on "Open Command Window Here"
2b. Once the cmd prompt is opened, "adb.exe reboot bootloader"
3. When the phone is in bootloader, on your cmd prompt, type : fastbootexe oem lock
It will relock your bootloader and wipe everything so before that, do a LG Backup on you PC or SD Card).
4. fastboot.exe reboot
5. Enable developer mode (pressing 7 times build version in about phone), go in developper options then disable OEM unlock
That's what I've done to get back my G5 full stock (you can thank me and bornheim2 in the post in this thread : https://forum.xda-developers.com/lg-g5/how-to/lock-bootloader-h850-t3505922
Click to expand...
Click to collapse
This brings me to a bootloop:
Your device is corrupt. It cannot be trusted and will not boot. Thank u.