Thank for @genisys
This theme mod for H818p V20c
Link (file img ) https://www.fshare.vn/file/84LBLRR9ODKF
link tool and GUIDE ( "huong dan flash img" in folder) : https://www.fshare.vn/file/84LBLRR9ODKF
Video: https://youtu.be/isBG3gzdcG8
Install the software LG UP, full driver as Uprom
The necessary files: rom.kdz (here is the v6.0).Copy file to phone memory system1.img (phone memory - the root not in any folder at all). Connect to a computer g4.n LGUP select upgrade (selected refurbish but also in case of withdrawal cable will not be reformatted g4 kip then have to start again). Wait for the machine reboot wait until the COM port appears on g4 (xx) - depending on plant- then immediately withdraw cable from the computer or g4. Off LGUP then plug the computer cable. CMD CMD enabled in folder attached below. Type the command as in the guide "Send_Command.exe \\. \ COMxx" (replaced by Section xx COM port number appears on g4). Appears the "#" type in the command "Print" (to appear 1 series statement form (0) (0) (0) ... (like that). Some computer users when typing win 7 "ip" will not appear at all when it shut down CMD, run it again and type the command would be. After the command "dd if=/data/media/0/system1.img bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0" wait until they appear flashing "#" followed LEAVE typing (without appliance ).
Remove the battery cable pulled reboot and achievements
BUG: select HOME in setting is forclose
...
haian36 said:
Thank for @genisys
This theme mod for H818p V20c
Link (file img ) Update.........
Click to expand...
Click to collapse
What's your dpi value? Seems even lower than 540.
Diatomix98 said:
What's your dpi value? Seems even lower than 540.
Click to expand...
Click to collapse
Dpi=540
https://youtu.be/isBG3gzdcG8
hi . android 5.1 maybe flash this rom ? or should android 6 ?
elnino909 said:
hi . android 5.1 maybe flash this rom ? or should android 6 ?
Click to expand...
Click to collapse
you must update the rom 6.0 V20C
haian36 said:
you must update the rom 6.0 V20C
Click to expand...
Click to collapse
rom 6.0 v20c is not root and recovery for flash this rom
haian36 said:
Thank for @genisys
This theme mod for H818p V20c
Link (file img ) https://www.fshare.vn/file/84LBLRR9ODKF
Video: https://youtu.be/isBG3gzdcG8
Click to expand...
Click to collapse
how to install? just flash the .img thru LGUP?
other language available? english?
thanks
elrosid said:
how to install? just flash the .img thru LGUP?
other language available? english?
thanks
Click to expand...
Click to collapse
Flash with img
All language available
hi . flash with lgup or recovery ?
Hello
I have to flash .img file with LGUP or something? because i cant flash it via LGUP (Zip or .img)
It would be great if you put some tutorial how to flash it
Thank you so much
haian36 said:
Flash with img
All language available
Click to expand...
Click to collapse
go to rom v20c and then flash the .img thru recovery?
how about v20d is it possible?
elrosid said:
go to rom v20c and then flash the .img thru recovery?
how about v20d is it possible?
Click to expand...
Click to collapse
V20d Bluetooth forclose
Update GUIDE on #1
haian36 said:
Flash with img
All language available
Click to expand...
Click to collapse
haian36 said:
V20d Bluetooth forclose
Click to expand...
Click to collapse
haian36 said:
Update GUIDE on #1
Click to expand...
Click to collapse
i really appreciate your help for making a guide, but so sorry to say the guide itself isn't clear i cant understand.
maybe you have time to make a video tutorial? would be better.
thanks :good:
Hello
I just eant to make sure, is the tools and guide links are the same with .img link? Because link is the same. And i try to download both, is the same file
Sent from my LG-H818 using XDA-Developers mobile app
Good work
haian36 said:
Thank for @genisys
This theme mod for H818p V20c
Link (file img ) https://www.fshare.vn/file/84LBLRR9ODKF
link tool and GUIDE ( "huong dan flash img" in folder) : https://www.fshare.vn/file/84LBLRR9ODKF
Video: https://youtu.be/isBG3gzdcG8
Install the software LG UP, full driver as Uprom
The necessary files: rom.kdz (here is the v6.0).Copy file to phone memory system1.img (phone memory - the root not in any folder at all). Connect to a computer g4.n LGUP select upgrade (selected refurbish but also in case of withdrawal cable will not be reformatted g4 kip then have to start again). Wait for the machine reboot wait until the COM port appears on g4 (xx) - depending on plant- then immediately withdraw cable from the computer or g4. Off LGUP then plug the computer cable. CMD CMD enabled in folder attached below. Type the command as in the guide "Send_Command.exe \\. \ COMxx" (replaced by Section xx COM port number appears on g4). Appears the "#" type in the command "Print" (to appear 1 series statement form (0) (0) (0) ... (like that). Some computer users when typing win 7 "ip" will not appear at all when it shut down CMD, run it again and type the command would be. After the command "dd if=/data/media/0/system1.img bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0" wait until they appear flashing "#" followed LEAVE typing (without appliance ).
Remove the battery cable pulled reboot and achievements
BUG: select HOME in setting is forclose
...
Click to expand...
Click to collapse
Looks really nice!:good:
As far as installation procedure is concerned, I have read it many times, but could not understand it exactly. If i have not miss understood, the procedure should be like that
Step 1. Upgrade/downgrade to MM v20C (if it is not already installed) through LGUP!
Step 2. inject the system image as we used to do for rooting LP!
Complete Guide+V20C+LGUP
Done
Thanks for hard work:good:
QSR1 said:
Looks really nice!:good:
As far as installation procedure is concerned, I have read it many times, but could not understand it exactly. If i have not miss understood, the procedure should be like that
Step 1. Upgrade/downgrade to MM v20C (if it is not already installed) through LGUP!
Step 2. inject the system image as we used to do for rooting LP!
Complete Guide+V20C+LGUP
Done
Thanks for hard work:good:
Click to expand...
Click to collapse
have you tried the mod? i want to but still confused about the steps
QSR1 said:
Looks really nice!:good:
As far as installation procedure is concerned, I have read it many times, but could not understand it exactly. If i have not miss understood, the procedure should be like that
Step 1. Upgrade/downgrade to MM v20C (if it is not already installed) through LGUP!
Step 2. inject the system image as we used to do for rooting LP!
Complete Guide+V20C+LGUP
Done
Thanks for hard work:good:
Click to expand...
Click to collapse
elrosid said:
have you tried the mod? i want to but still confused about the steps
Click to expand...
Click to collapse
I triend injecting it like root procedure for LP. I have no luck, getting error when i send the "Print" and "dd if=/data/media/0/system1.img bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0" command
Related
this guide is a compilation of the modding thanks to everybody works for this Smartphone:victory:
i'm not a developer but i tested all and they work
lg g2 mini It's the little brother of Lg g2, the cousin of Lg g3 and g3s, the Uncle of the brothers Optimus.
SECRET MENU
tap this sequence in the dialer
3845#*620#( this sequence is for the european mode; for other device change "620" with the number of the model, for exemple 618)
ROOT-UNROOT
to root the device use (this root method is tested with the lg d620r)
towelroot apk
https://towelroot.com/
Another useful tool after root is busybox
https://play.google.com/store/apps/details?id=stericson.busybox&hl=it
superuser
https://play.google.com/store/apps/details?id=com.noshufou.android.su
to unroot the device we can use
Universal Unroot
https://play.google.com/store/apps/details?id=com.universal.unroot&hl=it
or simple reflash the original lg rom
RETURN STOCK :AN USER FRIENDLY GUIDE
to return stock we need
- drivers http://oceanhost.eu/ed0bnrnghgef/LGUnitedMobileDriver_S51MAN312AP22_ML_WHQL_Ver_3.12.3.exe.htm
- lg flash tool (a software similar an Odin)http://oceanhost.eu/mipqojfvv9ti/LG_Flash_Tool_2014.zip.html
- a Run Time library (if you have problem with install or play lg flash tool) http://oceanhost.eu/mipqojfvv9ti/LG_Flash_Tool_2014.zip.html
- the stock rom http://lg-firmware-rom.com/ ( go here and use your Imei which is inside your lg g2 mini box or obtainable typing *#06# from your Dialer). The stock Rom is big (1 gb approximately)
this is the Euopean stock no brand rom (only d620r)
firmware: D62010g_00
https://drive.google.com/file/d/0B5GaDwb0xUaWQXNMRGVEQlhUc1k/view?usp=sharing
download and install drivers
download and unpack in a folder LG FLAH TOOL
open LG FLASH TOOL as administrator
where is written "Select KDZ file" put the your stock rom
if you want only reflash the stock rom , choose "Normal flash" , otherwise if you want to make no brand , choose "CSE flash"
and tap "START"
choose your Country and language
connect your device in DOWNLOAD MODE ( insert usb cable holding the + volume button; the device is off)
click retry and Wait Until the end ( IF you Choise CSE Flash ,after the flash all user data will be erased!)
IF THE DEVICE IS BLOCKED IN BOOTLOOP AFTER THE PROCESS, SWITCH OFF , AND SWITCH ON THE DEVICE HOLDING THE POWER BUTTON AND THE - VOLUME BUTTON; WHEN APPEAR THE LG LOGO , LEAVE THE BUTTONS FOR A SECOND AND HOLD THEM AGAIN. DO AN HARD RESET AND REBOOT(after the hard Factory reset , all data will be ERASED!)
UNLOCK BOOTLOADER: NOOB GUIDE
WARNING!:this method work only on D620r!
to unlock bootloader we need
- a terminal apk https://play.google.com/store/apps/details?id=jackpal.androidterm
- aboot.img modified by ZAAAP http://forum.xda-developers.com/g2-mini/development/bootloader-unlock-t2827748
Open terminal,
write
su
dd if=/dev/block/platform/msm_sdcc.1/by-name/aboot of=/sdcard/aboot.img
so, make a backup of the file aboot.img and replace it with aboot4.img in the sdcard folder.
write
dd if=/sdcard/aboot4.img of=/dev/block/platform/msm_sdcc.1/by-name/aboot
reboot the device with the command
reboot
We can also use adb to unlock the device by pc
https://www.youtube.com/watch?v=8aRrmxCOnQ0
INSTALL CUSTOM RECOVERY D620R
to install recovery we need
- custom recovery http://forum.xda-developers.com/g2-mini/development/recovery-testing-lg-g2-mini-d620-t2835276
- an app to flash zip
rashr https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
flashify https://play.google.com/store/apps/details?id=com.cgollner.flashify
put inside the storage memory the recovery, install the app,
flash the recovery and reboot
INSTALL CUSTOM ROM? D620R Only
download a rom and flash it
cyanogenmod( camera, vibration to fix )
http://forum.xda-developers.com/g2-...cm-11-unofficial-d620-to-test-moment-t2852497
pacrom mod( it's based on cyanogenmod rom :silly
http://forum.xda-developers.com/g2-mini/development/rom-pac-rom-lg-g2-mini-d620-alpha-t2876820
BACKUP STOCK APP AND SOUND
this are all apps of the rom (system apps + sounds of system)
https://www.mediafire.com/folder/lxef2ds430f88/lg_app
Consider the below constructive criticism. No offence meant
dandundan said:
ROOT-UNROOT
to root the device use
towelroot apk
https://towelroot.com/
Click to expand...
Click to collapse
You need to mention LG RCT.
This doesn't work for all models / firmwares.
RETURN STOCK :AN USER FRIENDLY GUIDE
to return stock we need
- drivers http://oceanhost.eu/ed0bnrnghgef/LGUnitedMobileDriver_S51MAN312AP22_ML_WHQL_Ver_3.12.3.exe.htm
- lg flash tool (a software similar an Odin)http://oceanhost.eu/mipqojfvv9ti/LG_Flash_Tool_2014.zip.html
- a Run Time library (if you have problem with install or play lg flash tool) http://oceanhost.eu/mipqojfvv9ti/LG_Flash_Tool_2014.zip.html
- the stock rom http://lg-firmware-rom.com/ ( go here and use your Imei which is inside your lg g2 mini box or obtainable typing *#06# from your Dialer). The stock Rom is big (1 gb approximately)
this is the Euopean stock no brand rom (only d620r)
https://drive.google.com/file/d/0B5GaDwb0xUaWQXNMRGVEQlhUc1k/view?usp=sharing
Click to expand...
Click to collapse
Which firmware version is this?
download and install drivers
download and unpack in a folder LG FLAH TOOL
open LG FLASH TOOL as administrator
where is written "Select KDZ file" put the your stock rom
if you want only reflash the stock rom , choose "Normal flash" , otherwise if you want to make no brand , choose "CSE flash"
and tap "START"
choose your Country and language
connect your device in DOWNLOAD MODE ( insert usb cable holding the + volume button; the device is off)
click retry and Wait Until the end
IF THE DEVICE IS BLOCKED IN BOOTLOOP AFTER THE PROCESS, SWITCH OFF , AND SWITCH ON THE DEVICE HOLDING THE POWER BUTTON AND THE - VOLUME BUTTON; WHEN APPEAR THE LG LOGO , LEAVE THE BUTTONS FOR A SECOND AND HOLD THEM AGAIN. DO AN HARD RESET AND REBOOT
Click to expand...
Click to collapse
You should mention that the hard reset will delete all user data.
UNLOCK BOOTLOADER: NOOB GUIDE
Click to expand...
Click to collapse
You should mention that this is dangerous.
And only for D620R (the aboot by @Zaaap72 )
to unlock bootloader we need
- a terminal apk https://play.google.com/store/apps/details?id=jackpal.androidterm
- aboot.img modified by ZAAAP http://forum.xda-developers.com/g2-mini/development/bootloader-unlock-t2827748
Open terminal,
write
su
mount -o rw,remount -t ext3 /dev/block/mmcblk1p21 /system
Click to expand...
Click to collapse
Why mount /system RW?
dd if=/dev/block/platform/msm_sdcc.1/by-name/aboot of=/sdcard/aboot.img
so, delete the file aboot.img and replace it with aboot4.img in the sdcard folder
Click to expand...
Click to collapse
No! Keep aboot.img as backup!
BACKUP STOCK APP AND SOUND
here they are
https://www.mediafire.com/folder/lxef2ds430f88/lg_app
Click to expand...
Click to collapse
What do you mean here?
Vagelis1608 said:
Consider the below constructive criticism. No offence meant
You need to mention LG RCT.
This doesn't work for all models / firmwares.
Which firmware version is this?
You should mention that the hard reset will delete all user data.
You should mention that this is dangerous.
And only for D620R (the aboot by @Zaaap72 )
Why mount /system RW?
No! Keep aboot.img as backup!
What do you mean here?
Click to expand...
Click to collapse
You are right....i will correct all sorry
dandundan said:
You are right....i will correct all sorry
Click to expand...
Click to collapse
Your tutorial was already really good.
I just wanted to help you improve it
EDIT: Don't forget to mention the LG RCT link I gave you
Yes i understand, the angry emoticon was an error , thanks for alla
dandundan said:
Yes i understand, the angry emoticon was an error , thanks for alla
Click to expand...
Click to collapse
Oh, I just noticed that it was . I thought that it was , lol
Vagelis1608 said:
Oh, I just noticed that it was . I thought that it was , lol
Click to expand...
Click to collapse
I correct it , How is it now?
Just one thing
dandundan said:
if you want only reflash the stock rom , choose "Normal flash" , otherwise if you want to make no brand , choose "CSE flash"
and tap "START"
choose your Country and language
connect your device in DOWNLOAD MODE ( insert usb cable holding the + volume button; the device is off)
click retry and Wait Until the end ( after the flash all user data will be erased!)
IF THE DEVICE IS BLOCKED IN BOOTLOOP AFTER THE PROCESS, SWITCH OFF , AND SWITCH ON THE DEVICE HOLDING THE POWER BUTTON AND THE - VOLUME BUTTON; WHEN APPEAR THE LG LOGO , LEAVE THE BUTTONS FOR A SECOND AND HOLD THEM AGAIN. DO AN HARD RESET AND REBOOT(after the hard reset , all dta will be ERASED!)
Click to expand...
Click to collapse
"Normal Flash" will not erase user data.
"CSE Flash" & Hard (Factory) Reset will erase all user data.
perfect informations for our g2 mini.
can I use this guide for my d620? (not d620r) I need unbranded stock rom please...
dandundan said:
this guide is a compilation of the modding thanks to everybody works for this Smartphone:victory:
i'm not a developer but i tested all and they work
lg g2 mini It's the little brother of Lg g2, the cousin of Lg g3 and g3s, the Uncle of the brothers Optimus.
SECRET MENU
tap this sequence in the dialer
3845#*620#( this sequence is for the european mode; for other device change "620" with the number of the model, for exemple 618)
ROOT-UNROOT
to root the device use (this root method is tested with the lg d620r)
towelroot apk
https://towelroot.com/
Another useful tool after root is busybox
https://play.google.com/store/apps/details?id=stericson.busybox&hl=it
superuser
https://play.google.com/store/apps/details?id=com.noshufou.android.su
to unroot the device we can use
Universal Unroot
https://play.google.com/store/apps/details?id=com.universal.unroot&hl=it
or simple reflash the original lg rom
RETURN STOCK :AN USER FRIENDLY GUIDE
to return stock we need
- drivers http://oceanhost.eu/ed0bnrnghgef/LGUnitedMobileDriver_S51MAN312AP22_ML_WHQL_Ver_3.12.3.exe.htm
- lg flash tool (a software similar an Odin)http://oceanhost.eu/mipqojfvv9ti/LG_Flash_Tool_2014.zip.html
- a Run Time library (if you have problem with install or play lg flash tool) http://oceanhost.eu/mipqojfvv9ti/LG_Flash_Tool_2014.zip.html
- the stock rom http://lg-firmware-rom.com/ ( go here and use your Imei which is inside your lg g2 mini box or obtainable typing *#06# from your Dialer). The stock Rom is big (1 gb approximately)
this is the Euopean stock no brand rom (only d620r)
firmware: D62010g_00
https://drive.google.com/file/d/0B5GaDwb0xUaWQXNMRGVEQlhUc1k/view?usp=sharing
download and install drivers
download and unpack in a folder LG FLAH TOOL
open LG FLASH TOOL as administrator
where is written "Select KDZ file" put the your stock rom
if you want only reflash the stock rom , choose "Normal flash" , otherwise if you want to make no brand , choose "CSE flash"
and tap "START"
choose your Country and language
connect your device in DOWNLOAD MODE ( insert usb cable holding the + volume button; the device is off)
click retry and Wait Until the end ( IF you Choise CSE Flash ,after the flash all user data will be erased!)
IF THE DEVICE IS BLOCKED IN BOOTLOOP AFTER THE PROCESS, SWITCH OFF , AND SWITCH ON THE DEVICE HOLDING THE POWER BUTTON AND THE - VOLUME BUTTON; WHEN APPEAR THE LG LOGO , LEAVE THE BUTTONS FOR A SECOND AND HOLD THEM AGAIN. DO AN HARD RESET AND REBOOT(after the hard Factory reset , all data will be ERASED!)
UNLOCK BOOTLOADER: NOOB GUIDE
WARNING!:this method work only on D620r!
to unlock bootloader we need
- a terminal apk https://play.google.com/store/apps/details?id=jackpal.androidterm
- aboot.img modified by ZAAAP http://forum.xda-developers.com/g2-mini/development/bootloader-unlock-t2827748
Open terminal,
write
su
dd if=/dev/block/platform/msm_sdcc.1/by-name/aboot of=/sdcard/aboot.img
so, make a backup of the file aboot.img and replace it with aboot4.img in the sdcard folder.
write
dd if=/sdcard/aboot4.img of=/dev/block/platform/msm_sdcc.1/by-name/aboot
reboot the device with the command
reboot
We can also use adb to unlock the device by pc
https://www.youtube.com/watch?v=8aRrmxCOnQ0
INSTALL CUSTOM RECOVERY D620R
to install recovery we need
- custom recovery http://forum.xda-developers.com/g2-mini/development/recovery-testing-lg-g2-mini-d620-t2835276
- an app to flash zip
rashr https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
flashify https://play.google.com/store/apps/details?id=com.cgollner.flashify
put inside the storage memory the recovery, install the app,
flash the recovery and reboot
INSTALL CUSTOM ROM? D620R Only
download a rom and flash it
cyanogenmod( camera, vibration to fix )
http://forum.xda-developers.com/g2-...cm-11-unofficial-d620-to-test-moment-t2852497
pacrom mod( it's based on cyanogenmod rom :silly
http://forum.xda-developers.com/g2-mini/development/rom-pac-rom-lg-g2-mini-d620-alpha-t2876820
BACKUP STOCK APP AND SOUND
this are all apps of the rom (system apps + sounds of system)
https://www.mediafire.com/folder/lxef2ds430f88/lg_app
Click to expand...
Click to collapse
I can not for two days trying to help me request
http://forum.xda-developers.com/g2-mini/help/help-white-device-t2900228#post55938500
Appliance Off
But the drive to see a picture ID
I tried this again
It stops here
What's the problem, I will go crazy for two days
lock bootloader
If I flash kdz, will I have relocked bootloader? If not, how can I lock it again?
cretu01 said:
If I flash kdz, will I have relocked bootloader? If not, how can I lock it again?
Click to expand...
Click to collapse
Flashing a kdz relocks the bootloader.
You can also relock the bootloader by flashing an unmodified about.img for your model.
Sent from my GT-I5500 [CM11]
Towelroot method doesn't work on LG 620r with s/w V10H.
zpfr said:
Towelroot method doesn't work on LG 620r with s/w V10H.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=55533010
Sent from my GT-I5500 [CM11]
haimmalka said:
I can not for two days trying to help me request
http://forum.xda-developers.com/g2-mini/help/help-white-device-t2900228#post55938500
Appliance Off
But the drive to see a picture ID
I tried this again
It stops here
What's the problem, I will go crazy for two days
Click to expand...
Click to collapse
try to reinstall drivers
dandundan said:
try to reinstall drivers
Click to expand...
Click to collapse
4 days ago I just install installs
I'm desperate, I give him the day they break the head of the laboratory with
Hy, afther flash lang pack still the same i need rom with hungarian lang or Romanian.
Hi guys. I'm not really sure if i'm in the right place to ask this question but i managed easily to root, unlock bootloader and flash cwm recovery so i thought when this thread helped with all of above (and thanks for that!) maybe someone can answer me how to (and can i) do a sim unlock of d620r ?
I'm having an LG phone for the first time. Other androids i had (mostly samsung and sony) i was able to unlock quite easy finding online tutorials but with this one i'm stuck cause i don't seem to be able to find any help on google or here on xda.
Any info would be very appreciated
urosmax said:
Hi guys. I'm not really sure if i'm in the right place to ask this question but i managed easily to root, unlock bootloader and flash cwm recovery so i thought when this thread helped with all of above (and thanks for that!) maybe someone can answer me how to (and can i) do a sim unlock of d620r ?
I'm having an LG phone for the first time. Other androids i had (mostly samsung and sony) i was able to unlock quite easy finding online tutorials but with this one i'm stuck cause i don't seem to be able to find any help on google or here on xda.
Any info would be very appreciated
Click to expand...
Click to collapse
So is your device branded?
Sent from my GT-I5500 [CM11]
For Lg d625 what "type" and "phone mode" should i select?
Thanks!
Hey..
Before asking for help let me tell you the whole story 1st, my device was working like charm..
It was Rooted ( i followed this instruction to get Root access ), having PhilZ recovery ( got this from here )..
I removed bloatwares and unwanted apps etc, made some tweaks using Xposed and some directly, replaced bootanimation still device was working fine after this I export it as Custom ROM.
Problem comes here when I was restoring Custom ROM i got Bootloop ( stuck on 1st LG logo ), I guess I forgot to Wipe Dalvik Cache..
I tried following solutions:
- Boot in to Recovery Mode, tried almost every combination but no to avail.
- Flash Stock Firmware but there is no flash files available on internet.
There is a guy on lgbbs.com who have .kdz ( link for f430l's .kdz ) it's paid content, I have not Paypal or any other source to buy.
- Tried in local market but there is no one who can help me.
- Now I want to get into Recovery Mode using ADB but I am facing following problem.
Please check out the attached pictures, hope so you'll get the point (remember device is in bootloop position).
Install PDANET for windows
Get into philz recovery
connect the phone to pc
rename the rom to ROM.zip
copy to adb folder
now put the following command
adb push ROM.zip /sdcard/ROM.zip
Now install from internal sdcard
hit thanx if i helped you
I found this
http://main.develoid.com:81/lg/
LGF430LAT-00-V10a-LGU-KR-AUG-16-2014+0.tot
Is the file you would want. Tots are another form of LG stock software. You'd need the LG Flashtool for it. Might need to find a dll file for it, if it's not included in the zip. I have no way to test if it's the correct file, but is free to download and most people wouldn't go through all the trouble to upload 2 GB files if it wasn't a working one. Good luck.
hafizadv said:
Install PDANET for windows
Get into philz recovery
connect the phone to pc
rename the rom to ROM.zip
copy to adb folder
now put the following command
adb push ROM.zip /sdcard/ROM.zip
Now install from internal sdcard
hit thanx if i helped you
Click to expand...
Click to collapse
Thanks alot.. PDANET doesn't work for me, anyway now Allhmdullilah my device is back into work..
es0tericcha0s said:
I found this
http://main.develoid.com:81/lg/
LGF430LAT-00-V10a-LGU-KR-AUG-16-2014+0.tot
Is the file you would want. Tots are another form of LG stock software. You'd need the LG Flashtool for it. Might need to find a dll file for it, if it's not included in the zip. I have no way to test if it's the correct file, but is free to download and most people wouldn't go through all the trouble to upload 2 GB files if it wasn't a working one. Good luck.
Click to expand...
Click to collapse
Bundle of Thanks.. I really need this one too.. because I can't stop myself to mess with my device, it will help me next time..
Some One Got DLL For F430L?
Thanks Anticipation
shoaibrao said:
Some One Got DLL For F430L?
Thanks Anticipation
Click to expand...
Click to collapse
Does the device have download mode? Try by tuning it off, holding both volume buttons and then plugging the usb cable. If yes, download lg mobile support tool and try from there.
TheFagulousFag said:
Does the device have download mode? Try by tuning it off, holding both volume buttons and then plugging the usb cable. If yes, download lg mobile support tool and try from there.
Click to expand...
Click to collapse
Sir Its Alive Hang On Logo
Can Some One Help Me For KDZ Or TOT+DLL
Thanks Anticipation
shoaibrao said:
Sir Its Alive Hang On Logo
Can Some One Help Me For KDZ Or TOT+DLL
Thanks Anticipation
Click to expand...
Click to collapse
here's the .kdz
https://drive.google.com/file/d/0BxBs2ZTyHoQ1UWdIUl80b25PeUE/view?pref=2&pli=1
password: lgviet.com
Hello everyone !
I want to go back to stock. (For warrantly)
I try to follow this thread : https://forum.xda-developers.com/lg-g5/how-to/lg-5-to-stock-t3369959
But most links don't work. (What version of LG UP should I use?)
I have a bigger problem, I cant download any KDZ file !!!
This link is not working : http://csmgdl.lgmobile.com/dn/downl...27IATRF9CA9OFE/H85010c_00_OPEN_EU_OP_0415.kdz
Can you help me please?
Thanks a lot for your help
I would also like to ask if it's possible to go back to stock without USB connection, because my port is kinda broken and I want to bring it to warranty clean.
Do you want to go back stock, relocking your bootloader ?
Because there is an easy way to go back stock.
1. You have to put your phone on USB debugging (if it not already done)
2. Reboot in bootloader, if you have minimal adb and fastboot tools, it will be easy : (you can find it there : https://forum.xda-developers.com/showthread.php?t=2317790)
2a. shift + right click on the adb and fastboot directory (where *.exe are), click on "Open Command Window Here"
2b. Once the cmd prompt is opened, "adb.exe reboot bootloader"
3. When the phone is in bootloader, on your cmd prompt, type : fastbootexe oem lock
It will relock your bootloader and wipe everything so before that, do a LG Backup on you PC or SD Card).
4. fastboot.exe reboot
5. Enable developer mode (pressing 7 times build version in about phone), go in developper options then disable OEM unlock
That's what I've done to get back my G5 full stock (you can thank me and bornheim2 in the post in this thread : https://forum.xda-developers.com/lg-g5/how-to/lock-bootloader-h850-t3505922
Thanks a lot for your answer.
I have installed the FLUENCE HD rom, and a revovery.
It will undo everything?
Thanks you.
Nope, you should do this on a stock ROM.
Did you tried to install a KDZ file in upgrade mode ? (not refurbish).
Actually I can't download the KDZ file, the link I posted above is not working.
Thanks for your answer.
You can download it from here :
H85010i_00_OPEN_EU_OP_0923.kdz for LGH850 (Marshmallow)
http://lg-firmwares.com/download-file/?fileId=3497
H85020a_00_OPEN_EU_OP_1030.kdz for LGH850 (Nougat)
http://lg-firmwares.com/download-file/?fileId=4313
I tried, and no problem
taiji_khan said:
You can download it from here :
H85010i_00_OPEN_EU_OP_0923.kdz for LGH850 (Marshmallow)
http://lg-firmwares.com/download-file/?fileId=3497
H85020a_00_OPEN_EU_OP_1030.kdz for LGH850 (Nougat)
http://lg-firmwares.com/download-file/?fileId=4313
I tried, and no problem
Click to expand...
Click to collapse
Hi,Fastboot oem lock works on both the kdz you linked?
And do you know if I can flash this kdz on a Vodafone branded H850?
Sent from my LG-H850 using Tapatalk
Tanks for your answer.
What rom should I use?
Other question : What do '10i' stands for?
Thanks.
taiji_khan said:
You can download it from here :
H85010i_00_OPEN_EU_OP_0923.kdz for LGH850 (Marshmallow)
http://lg-firmwares.com/download-file/?fileId=3497
H85020a_00_OPEN_EU_OP_1030.kdz for LGH850 (Nougat)
http://lg-firmwares.com/download-file/?fileId=4313
I tried, and no problem
Click to expand...
Click to collapse
Thanks to you I succeed !!
Thanks a lot for your help, it went well.
Exept i had troubles with LG UP, I had to replace a DLL file. Then I had to manually install google ADB drivers.
I'll post exactly what I did later today.
Jongla said:
Hi,Fastboot oem lock works on both the kdz you linked?
And do you know if I can flash this kdz on a Vodafone branded H850?
Click to expand...
Click to collapse
I relock my bootloader after Nougat update but I suppose you can relock on both.
When you flash a KDZ file, it will flash the system.img so it will erase your Vodafone version I guess. The difference between update and refurbish is that update do not erase your data but you can perform an update then a reset factory and wipe your data from setup menu in MM or Nougat. (if someone can tell me if I'm wrong or not )
maxander said:
What rom should I use?
Other question : What do '10i' stands for?
Click to expand...
Click to collapse
10i is is last MM version, it is just the build version, the other is Nougat. You can install the version you prefer
maxander said:
Thanks to you I succeed !!
Thanks a lot for your help, it went well.
Exept i had troubles with LG UP, I had to replace a DLL file. Then I had to manually install google ADB drivers.
I'll post exactly what I did later today.
Click to expand...
Click to collapse
Great news :highfive:
taiji_khan said:
I relock my bootloader after Nougat update but I suppose you can relock on both.
The difference between update and refurbish is that update do not erase your data but you can perform an update then a reset factory and wipe your data from setup menu in MM or Nougat. (if someone can tell me if I'm wrong or not )
Click to expand...
Click to collapse
I couldn't refurbish with the KDZ you gave me. Apparently they are not compatible with refurbish mode.
taiji_khan said:
Do you want to go back stock, relocking your bootloader ?
Because there is an easy way to go back stock.
1. You have to put your phone on USB debugging (if it not already done)
2. Reboot in bootloader, if you have minimal adb and fastboot tools, it will be easy : (you can find it there : https://forum.xda-developers.com/showthread.php?t=2317790)
2a. shift + right click on the adb and fastboot directory (where *.exe are), click on "Open Command Window Here"
2b. Once the cmd prompt is opened, "adb.exe reboot bootloader"
3. When the phone is in bootloader, on your cmd prompt, type : fastbootexe oem lock
It will relock your bootloader and wipe everything so before that, do a LG Backup on you PC or SD Card).
4. fastboot.exe reboot
5. Enable developer mode (pressing 7 times build version in about phone), go in developper options then disable OEM unlock
That's what I've done to get back my G5 full stock (you can thank me and bornheim2 in the post in this thread : https://forum.xda-developers.com/lg-g5/how-to/lock-bootloader-h850-t3505922
Click to expand...
Click to collapse
This brings me to a bootloop:
Your device is corrupt. It cannot be trusted and will not boot. Thank u.
This is for Marshmallow B13. However, I can confirm that installing twrp using tenfars tool still works even on latest B17 nougat or B08 mifavor 5.
However, some users don't have luck with it.
I advise to check first on Axon Toolkit located here:
https://forum.xda-developers.com/axon-7/development/tool-axon7toolkit-t3573108
I made this guide for users who haven't unlocked and rooted their A2017 B13 chinese version.
After reading so many guides here from @tenfar, @DrakenFX, and many others, I finally unlocked bootloader, rooted, installed TWRP and Xposed.
I take no responsibility if anything happens to your phone while doing this process. Just follow every step stated here and hope you don't mess around. Please READ all the instructions here first before doing anything.
Backup all your important data before you do any steps below. This process will delete all contents of your phone except external sdcard.
Step 1: Download the zip file and extract all files to your local disk in one folder.
TWRP recovery 3.1.0-0
axon7root.zip
TWRP_UnlockBootloaderPackage_by_DrakenFX.zip do not extract this file.
Step 2: Enable USB debugging and OEM unlocking under Developer options. to show Developer options, go to Settings, About phone, tap Build Number 7x.
Step 3: Open Windows Explorer and browse to the folder where you extracted the files downloaded above. Press and hold SHIFT key then right click and choose Open Command Window here. type:
Code:
adb reboot edl
This will reboot the phone in edl mode where it's just black screen.
Step 4: Install the Qualcomm's driver .
Download Qualcomm driver to your local disk ,extract and install it
Qualcomm 9008 driver : http://d-h.st/35tx
in the install process choose WWAN, the first option.
Alternative: you could just also install the native drivers provided by the phone. If you have done step 2 already, just long press Power button for about 10seconds to reboot to its system. Once booted, connect your phone to your pc via usb and swipe down from the notification. Choose "install drivers" from the connect options. Open your Windows Explorer and find the new drive containing the driver. After installing, repeat step 3.
Step 5 : open your PC's device manager and find out the com port number which your phone is from COM ports & LPT tree.
Code:
Usage Example: axon7root.exe -p COM4 -b -r
Options:
-p Port number eg: COM8 or 8
-b write boot.img only
-r write recovery.img only
-d dump boot.img and recovery.img from phone(not impl yet)
Step 6: in the command window from step 3, type:
Code:
axon7backup.exe -p COM# -d
replace # with the number of your COM PORT.
This will save the backup files for you stock boot and recovery image.
Step 7: to install TWRP, type:
Code:
axon7root.exe -p COM# -r
Step 8: reboot to TWRP by holding POWER + UP buttons.
Optional:
Step 8a: Copy twrp-3.1.0-0-ailsa_ii.img to your sdcard/extsd. Update to latest TWRP. Install -> IMG (lower right button) -> choose twrp-3.1.0-0-ailsa_ii.img. (Don't reboot to system yet)
Step 8b: From the TWRP, find Reboot to recovery. verify that you have version 3.1.0-0 already.
Step 9: Copy TWRP_UnlockBootloaderPackage_by_DrakenFX.zip to your sdcard/extsd.
Step 10: Back-up and pull current fastboot image. Type:
Code:
adb shell dd if=/dev/block/bootdevice/by-name/fbop of=/sdcard/fbop_lock.img
adb pull /sdcard/fbop_lock.img
Step 11: Flash/Install TWRP_UnlockBootloaderPackage_by_DrakenFX.zip. (do not reboot yet)
Step 12: Type:
Code:
adb reboot bootloader
Step 13: Now let's Unlock the Bootloader. (THIS WILL WIPE DATA+INTERNAL STORAGE)
Type:
Code:
fastboot oem unlock
Confirm yes from your phone.
Step 14: You'll boot in TWRP. once there do the following:
Code:
* tap CANCEL
* tap WIPE
* tap FORMAT DATA and Follow the Instructions
Step 15: Once done, REBOOT system. Follow the setup wizard to gain access to your phone. enable USB debugging again.
Optional: To install root, Boot to recovery again and install/flash SUPERSU 2.79. download at UPDATE-SuperSU-v2.79-20161211114519.zip and copy to your sdcard.
To install Xposed (for MM only), flash xposed-v87-sdk23-arm64.zip and install the apk XposedInstaller_3.1.1.apk.
Do not REBOOT after installation of Supersu and Xposed. Instead, go to Terminal and type:
Code:
reboot disemmcwp
Credits to all the great minds here in xda for doing all their best.
UPDATE: TWRP flashable zips available. Credits to @parazite69 and the russians for these.
parazite69 said:
Hi just used from a russian website , Flashable b13 zip!
ZTE_A2017V1.0.0B13_BootStack_by_djkuz.zip https://mega.nz/#!AwpE3Lyb!vQuJlu6apdIrqdBqqgxEHsiKdy3Aje3vdqXJupa9A4s
CRC32: CEE662FD
MD5: 67635E2EEE51BFF0E3B6F73591BA88B8
SHA-1: DAC1646FD8B0349CF262C7FD4C15987D5F700304
ZTE_A2017V1.0.0B13_StockSystem_by_djkuz.zip https://mega.nz/#!gpJyGCiC!0CkXk0yj17HK-JTkvkM5JuKflqeeCugZQosmbGj9xPk
CRC32: 79D0419A
MD5: DDD785A98FD32144920970B6B6BE8089
SHA-1: C96EDFE8F414A0D6904DAB1ED8673591D8DE496B
I am using it and it works! I Have just updated the bootstack and then installed the ZAD rom, but if you like the stock just install them both!
Click to expand...
Click to collapse
I'm stuck at B11 A2017 chinese version, can you give me a link for B13 for twrp flash?
danromania said:
I'm stuck at B11 A2017 chinese version, can you give me a link for B13 for twrp flash?
Click to expand...
Click to collapse
I would like this as well.
danromania said:
I'm stuck at B11 A2017 chinese version, can you give me a link for B13 for twrp flash?
Click to expand...
Click to collapse
BlazingBullets said:
I would like this as well.
Click to expand...
Click to collapse
I suggest do a full update to b13 using sdcard update first..
the file can be found on this thread.
https://forum.xda-developers.com/axon-7/development/axon-7-chinese-stock-roms-t3436817
When I got my phone, it was also on B11 rooted. but I upgraded it to B13 without problems.
otaconremo said:
I suggest do a full update to b13 using sdcard update first..
the file can be found on this thread.
https://forum.xda-developers.com/axon-7/development/axon-7-chinese-stock-roms-t3436817
When I got my phone, it was also on B11 rooted. but I upgraded it to B13 without problems.
Click to expand...
Click to collapse
doesn't work if you are unlocked or not using the stock recovery
BlazingBullets said:
doesn't work if you are unlocked or not using the stock recovery
Click to expand...
Click to collapse
I can confirm it's not working, root, unlocked and TWRP.
If somebody can compile B13 for TWRP will really help us.
Thanks!
You're right. You'll need stock recovery to do a full update though. I haven't backed up my B11 stock recovery but I do have the B13 stock boot and recovery. Message me if you want those files.
Sadly no one else wants to make a twrp update for B13. And I don't know how. I already asked from draken a couple of months ago but i think he has never got a time for it.
Can you help me,
I try to step by step but step 8
Went i push POWER + UP volume, i have a black screen, not TWRP, i can not do any thing
I would love to try this since I want to try installing a2017U nougat ora2017 G software instead Chinese stock but the link for axon7backup: http://d-h.st/Ienb is timing out and dead. I can't seem to get any twrp recoveries working with the other axon7tool method https://forum.xda-developers.com/axon-7/development/axon7tool-flash-backup-boot-recovery-t3514254 and also the signed twrp is gone. I need a working recovery the files from here. Will try reinstalling b10 and then try find b11 for the current recoveries to see if any work instead of giving me a black recovery screen.
Hello was wondering about the terminal reboot portion. I've been rooted with SU for a few days now can I just flash Xposed and install the apk without the worry of using terminal? Thanks
Sent from my ZTE A2017U using XDA-Developers Legacy app
thanhtri87 said:
Can you help me,
I try to step by step but step 8
Went i push POWER + UP volume, i have a black screen, not TWRP, i can not do any thing
Click to expand...
Click to collapse
try pressing just the power and Up buttons until it reboots and release when you see the ZTE logo. that should enter you into recovery.
yvgamer94 said:
I would love to try this since I want to try installing a2017U nougat ora2017 G software instead Chinese stock but the link for axon7backup: http://d-h.st/Ienb is timing out and dead. I can't seem to get any twrp recoveries working with the other axon7tool method https://forum.xda-developers.com/axon-7/development/axon7tool-flash-backup-boot-recovery-t3514254 and also the signed twrp is gone. I need a working recovery the files from here. Will try reinstalling b10 and then try find b11 for the current recoveries to see if any work instead of giving me a black recovery screen.
Click to expand...
Click to collapse
the links were up okay as I opened them now. you may want to disable your antivirus too since this will trigger it false positive.
also, all the files I used were posted in the links i posted. credits to the owners btw.
HTC55555 said:
Hello was wondering about the terminal reboot portion. I've been rooted with SU for a few days now can I just flash Xposed and install the apk without the worry of using terminal? Thanks
Sent from my ZTE A2017U using XDA-Developers Legacy app
Click to expand...
Click to collapse
have you tried your method without the terminal command? personally, I don't know if that works without the command but I just used it since it won't harm anyway.
danromania said:
I'm stuck at B11 A2017 chinese version, can you give me a link for B13 for twrp flash?
Click to expand...
Click to collapse
Hi just used from a russian website , Flashable b13 zip!
ZTE_A2017V1.0.0B13_BootStack_by_djkuz.zip https://mega.nz/#!AwpE…siKdy3Aje3vdqXJupa9A4s
CRC32: CEE662FD
MD5: 67635E2EEE51BFF0E3B6F73591BA88B8
SHA-1: DAC1646FD8B0349CF262C7FD4C15987D5F700304
ZTE_A2017V1.0.0B13_StockSystem_by_djkuz.zip https://mega.nz/#!gpJy…uKflqeeCugZQosmbGj9xPk
CRC32: 79D0419A
MD5: DDD785A98FD32144920970B6B6BE8089
SHA-1: C96EDFE8F414A0D6904DAB1ED8673591D8DE496B
I am using it and it works! I Have just updated the bootstack and then installed the ZAD rom, but if you like the stock just install them both!
parazite69 said:
Hi just used from a russian website , Flashable b13 zip!
ZTE_A2017V1.0.0B13_BootStack_by_djkuz.zip https://mega.nz/#!AwpE…siKdy3Aje3vdqXJupa9A4s
CRC32: CEE662FD
MD5: 67635E2EEE51BFF0E3B6F73591BA88B8
SHA-1: DAC1646FD8B0349CF262C7FD4C15987D5F700304
ZTE_A2017V1.0.0B13_StockSystem_by_djkuz.zip https://mega.nz/#!gpJy…uKflqeeCugZQosmbGj9xPk
CRC32: 79D0419A
MD5: DDD785A98FD32144920970B6B6BE8089
SHA-1: C96EDFE8F414A0D6904DAB1ED8673591D8DE496B
I am using it and it works! I Have just updated the bootstack and then installed the ZAD rom, but if you like the stock just install them both!
Click to expand...
Click to collapse
Great find! Do you mind if I put this in my OP so that others can use it too? Seems like a lot of other users can't manage to get my method well.
otaconremo said:
the links were up okay as I opened them now. you may want to disable your antivirus too since this will trigger it false positive.
also, all the files I used were posted in the links i posted. credits to the owners btw.
Click to expand...
Click to collapse
Thanks for replying. The link works until you try to download it. When you get past the ads, you get to this http://fs1.d-h.st/download/00237/Ienb/axon7backup.zip Did you also try downloading it? Either I am doing something wrong? Thanks.
yvgamer94 said:
Thanks for replying. The link works until you try to download it. When you get past the ads, you get to this http://fs1.d-h.st/download/00237/Ienb/axon7backup.zip Did you also try downloading it? Either I am doing something wrong? Thanks.
Click to expand...
Click to collapse
Yes I did download my files using those links. Try installing adblock plus on your browser. Or try other browsers.
otaconremo said:
Great find! Do you mind if I put this in my OP so that others can use it too? Seems like a lot of other users can't manage to get my method well.
Click to expand...
Click to collapse
Sure go ahead.
otaconremo said:
Yes I did download my files using those links. Try installing adblock plus on your browser. Or try other browsers.
Click to expand...
Click to collapse
It's probably just my pc or browser. It's ok though since I managed bootloader unlock and flash twrp with this guide instead:
https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514/
Thanks for your help though
I have one (stupid) question for which I can't find answer: I stuck at step 2 when I need to enable OEM unlocking. Problem is that some PIN is required but I don't know it and don't know where to find it? Many thanks!
This guide will show you how to root your Nokia 4.2. This has been tested on TA-1157 and is working fine.
**Important** - If fastboot does not recognise your device In step 5, You need to download a driver. Here is the link: Download Driver (by Beebom)
Search up how to install custom driver and install it to the “Android” device.
Requirements:
Nokia 4.2 with unlocked bootloader
USB Cable
ADB/Fastboot.
Python
Your current ROM file
Internet.
Downloads:
ADB Installer (by Snoop05 on xda) : Download
Python : Download
Payload Dumper (vm03 on github): Download ( Click on code and select "download ZIP")
Magisk APK (on your phone) : Download APK ( Scroll down and you will find the APK file)
Code:
** I have only tested this on TA-1157. Other models may not work, but technically they should work.**
** Your warranty is now Void**
Step 1
Enable USB debugging on your phone. If you do not know how to do this, Search it up. It is easy.
Once that's enabled, Connect your phone to your PC/Laptop and open the command prompt (cmd) and type adb devices. It should show your device in the list.
Step 2
Locate the Python folder. To do this, simply type "python" in the start menu and click open file location. Then, Right click on "python.exe" and open properties. Then click open file location.
Once the folder opens, make sure to not close it.
Download the payload dumper.py which I have linked in the downloads section. Extract it and place the contents of the file in the Python folder.
Step 3
Download the ROM file. If you are using lineage OS on your Nokia 4.2, Download that file. If you are using the Stock rom, Download that. It should be a .zip file.
Extract the stuff from that file and take payload.bin and move it to the python folder.
Now, Open cmd in that directory by right clicking and opening cmd. Then, Type the following commands,
Code:
python -m pip install -r requirements.txt
then type,
Code:
python payload_dumper.py payload.bin
Once it is done extracting, Open the "output" folder. There you will find the "boot.img" file
Step 4
Use your USB cable or Google drive to transfer the "boot.img" to your phone. Once you have done that, Download the Magisk APK on your phone and install the app. (APK link in downloads section)
Once you have installed Magisk, open it and click "Install". Select the file from your phone and wait a few minutes for magisk to patch the "boot.img" file.
Once Magisk is finished patching, there will be a new file which magisk has created. Transfer the patched file to your computer via the USB cable or Google drive and make sure to rename it as "magisk_patched.img"
Step 5
You are almost done! Open CMD in the folder where you saved the "magisk_patched.img" and type
Code:
adb reboot bootloader
then type
Code:
fastboot flash boot magisk_patched.img
Once done, Reboot your phone and Voila! Your phone is now rooted. Make sure to open the magisk app and check it.
If you need any help or you get any errors, post it down here below.
Also, If this helped you, consider liking the post!
I will try this in my Nokia 4.2 (TA-1149) I have unlocked bootloader and I have LineageOS 20
RZavala_2003 said:
I will try this in my Nokia 4.2 (TA-1149) I have unlocked bootloader and I have LineageOS 20
Click to expand...
Click to collapse
Cool!
If you have any problems, let me know.
Geoperson8 said:
Cool!
If you have any problems, let me know.
Click to expand...
Click to collapse
I'm typing this reply, in my 4.2 with LOS 20 and root with Magisk 25, this guide was too easy to understand, thanks a lot!
RZavala_2003 said:
I will try this in my Nokia 4.2 (TA-1149) I have unlocked bootloader and I have LineageOS 20
Click to expand...
Click to collapse
Bro i would be very thankful if you told me how you installed lineage os 20 i have the stock ROM rooted
Love from India
thecubernoober said:
Bro i would be very thankful if you told me how you installed lineage os 20 i have the stock ROM rooted
Love from India
Click to expand...
Click to collapse
I could help you with that
Geoperson8 said:
I could help you with that
Click to expand...
Click to collapse
Yes please i would be very thankful
Geoperson8 said:
I could help you with that
Click to expand...
Click to collapse
Please tell me how to install lineage os 20 in Nokia 4.2
King root not work connection problem
___za_x4_pan___ said:
King root not work connection problem
Click to expand...
Click to collapse
Personally, I do not recommend Kingroot as it is not very reliable and safe. Instead, you can follow this guide or follow other guides on youtube.
hello @Geoperson8 I have currently installed lineage os 20 on my nokia 4.2
But i am facing an issue with rooting my phone when I flash the patched boot.img it asks me for factory reset after factory reset one important part of flashing lineage os is flashing the vendor image but when I flash teh vendor image after flashing magisk my wifi does not work and that's what happens when you don't flash the vendor image but my wifi does not work even after flashing teh vendor image so please help me with rooting my nokia 4.2
RZavala_2003 said:
I'm typing this reply, in my 4.2 with LOS 20 and root with Magisk 25, this guide was too easy to understand, thanks a lot!
Click to expand...
Click to collapse
did you have to format you os
thecubernoober said:
did you have to format you os
Click to expand...
Click to collapse
No bro, i only read this guide and i rooted successfully!
thecubernoober said:
hello @Geoperson8 I have currently installed lineage os 20 on my nokia 4.2
But i am facing an issue with rooting my phone when I flash the patched boot.img it asks me for factory reset after factory reset one important part of flashing lineage os is flashing the vendor image but when I flash teh vendor image after flashing magisk my wifi does not work and that's what happens when you don't flash the vendor image but my wifi does not work even after flashing teh vendor image so please help me with rooting my nokia 4.2
Click to expand...
Click to collapse
I would recommed to flash the vendor image before doing any modifications on your phone. Hope this helps.
RZavala_2003 said:
I will try this in my Nokia 4.2 (TA-1149) I have unlocked bootloader and I have LineageOS 20
Click to expand...
Click to collapse
Can you tell me where did you find the vendor for that model? I have the same
imthetoadXD said:
Can you tell me where did you find the vendor for that model? I have the same
Click to expand...
Click to collapse
I can reply to that
So I found the firmware from the lineage os page section where it says switch back to stock and there is the firmware given for Android 11
Nokia 4.2 ROMs, Kernels, Recoveries, & Other Devel
Improve your Nokia 4.2's battery life, performance, and look by rooting it and installing a custom ROM, kernel, and more.
forum.xda-developers.com
Refer this page for the link of stock firmware
Just so you guys know, If you need any help. Feel free to ask me.
thecubernoober said:
I can reply to that
So I found the firmware from the lineage os page section where it says switch back to stock and there is the firmware given for Android 11
Nokia 4.2 ROMs, Kernels, Recoveries, & Other Devel
Improve your Nokia 4.2's battery life, performance, and look by rooting it and installing a custom ROM, kernel, and more.
forum.xda-developers.com
Refer this page for the link of stock firmware
Click to expand...
Click to collapse
Is your lineage OS and root working fine?