Hello Every one,
My problem is as following:
I have Galaxy Tan 2.7 GT-3113 suddenly the WI-Fi stopped working. it hang on "Turning on"
i tried hard reset and factory reset wiped caches but no luck. after some search some post suggested that it is SW bug and i should update the Android 4.1.1 to the new on 4.2. I tried all ways but my tab is not recognized on any computer. i tried different cable and different computers still the same issue. i tried to install cm.10.2 via Manual mode but of-course it failed signature. i could not root it because i have no connection via usb. i connected Samsung for a firmware img installable via manual mode but they say they do not support this way.
can someone help me?
Related
This is what happened. I want to upgrade my Samsung Galaxy tab 10.1n from 3.2 into 4.0 . I try to root and somehow I do some stupid error.
The bootloader screen become rolling. I found the solution from this thread http://forum.xda-developers.com/showthread.php?t=1555984 and it runs perfectly. my bootloader become normal.
But another problem come out after that. my PC can't detect my samsung through USB. any guide for this problem??
Change usb port or cable
Dont use usb hub
Reinstall kies 2
And retry
Sent from my GT-I9300 using xda app-developers app
noob here.
Galaxy Tab 10.1 P7510 Wifi
I have a similar problem to the above.
When I connect using the usb lead to the pc, nothing happens. I have reinstalled the drivers (both with and without Kies 2) and upon connecting the usb it acknowledges a connection and goes through some steps and proclaims the device is installed and ready to use. Except it's not. It doesn't show up in My Computer or when I remove and re-connect the usb, there is nothing - the same as before I resinstalled the drivers. Kies cannot find it either.
My issue is further matched by the above issue as I also followed the same guide as above. I previously tried to root the device several times and each time the recovery screen was doing the rolling / flicker thing. So I returned to stock. But inevitably I would get infuriated by all the things I couldn't do.
So when I found the guide http://forum.xda-developers.com/showthread.php?t=1555984 that further linked to http://forum.xda-developers.com/showpost.php?p=27830023&postcount=41 I was thrilled because I could finally read the Recovery screen.
So I proceeded to root the device as per http://forum.xda-developers.com/showthread.php?t=1474971. This was working fine with one exception. Which was that after the screen went into sleep mode and I pressed the power button to wake it up, the tablet was in a variant of the rolling / flicker screen. This happened every time. I repeated the rooting process making sure to wipe data / cache / dalvik.But it remained.
So I became adventurous and decided to flash an experimental CM9 sourced from droidbasement.
And that is where I am now. Unable to enter sleep mode and unable to connect to the pc to return to stock or try different roms.
Any suggestions or help welcome.
perhaps I should have opened a new thread but wasn't sure. please advise if so.
I used a different usb port and the pc could find it.
Now back on stock.
re:
Go to settings>labs>. Uncheck USB error (don't know the exact english terms)
I know that many people have issue with connecting SGS2 to PC, and i also know that there are plenty of different solutions on internet, but i wouldn't be writing here if i haven't tried literally almost every possible solution out there. I spent 2 days trying to fix this, but still no result.
PC doesn't recognize that my phone is connected, and on the rare occasions when it does - it just shows me an error with drivers - "Windows can't recognize device" or something like that. Of course i tried numerous times reinstalling drivers, Kies, i tried to connect on 3 different PCs, i bought a new cable today - still nothing (but when other phone is connected with the same cable, its recognized immediately.)
I'm running a custom ROM - XWLSW NeatROM Lite v4.8 (JB 4.1.2), but I flashed this rom several months ago and i didn't have a problem with connection until last month. I also tried several other ROMs, but nothing helped.
I tried to dial *#7284#, then change USB to Modem and then back to PDA, didn't help - the same with *#9090# and setting it to Log via Uart. And of course, USB debugging is off. I'm really desperate, the phone is working fine in any other way, but this is a huge complication for me, so any help would be greatly appreciated.
Also sorry for my english, I'm Slovak.
Hmm, could be a problem with the USB port in the phone. I had the same symptoms and turns out the USB port was damaged so i got it replaced (i has warranty)
Also have you tried if ODin recognizes the phone? Go into Download mode and open Odin. If you see yellow (or blue) box with writing "com:" something than you're good. Otherwise it's the first alternative
I tried Odin, still nothing. Well, I hope it's not a problem with phone USB port - i have a warranty, but I bought it on Cyprus.
Is there any other solution?
I know this.It's a Sammy ROM bug.I had it too on stock 4.0.3.Since 4.2.2 I don't have it.
Well, yesterday I tried SentinelROM v4.75-CM10.1, which has 4.2.2 FW, and still the same problem
Hello,
I got a problem with my device Galaxy tab 2 10.1 GT-P5113 . it downloads the new firmware, reboots but fails to install the firmware and a massage pops up suggesting to update using Kies.
I used Kies several times, it detects the device, connects to it, downloads the firmware and then device gets disconnected while Kies try to install the update but obviously it does not do it because the device is disconnected. .
Tried several things, uninstalling Kies completely, re installing,, reset device to factory and tried again but nothing worked.
Can someone help me please???
Something has happened to my phone (about a week ago), and now it cannot be detected on the computer (in touchwiz).
I have tried it on many different computers, but nothing.
When I reboot to recovery or download mode, it can be detected, but of course it is still an issue in touchwiz.
This happens on Eudemony Rom Alpha 4.4.4, and on the stock ROM 5.0.2 (dirty update).
Has anyone got ideas?
Thanks
novastorm17 said:
Something has happened to my phone (about a week ago), and now it cannot be detected on the computer (in touchwiz).
I have tried it on many different computers, but nothing.
When I reboot to recovery or download mode, it can be detected, but of course it is still an issue in touchwiz.
This happens on Eudemony Rom Alpha 4.4.4, and on the stock ROM 5.0.2 (dirty update).
Has anyone got ideas?
Thanks
Click to expand...
Click to collapse
Dial *#0808# from your phone Make sure Phone USB is set to AP and USB SETTING is set to MTP OR MTP+ADB
Have you tried flashing Stock 4.4.4 rom from sammobile then, clear dalvik clear cache and factory reset. After this delete samsung driver and kies from your Pc AND reinstall then connect your phone.
dork997 said:
Dial *#0808# from your phone Make sure Phone USB is set to AP and USB SETTING is set to MTP OR MTP+ADB
Have you tried flashing Stock 4.4.4 rom from sammobile then, clear dalvik clear cache and factory reset. After this delete samsung driver and kies from your Pc AND reinstall then connect your phone.
Click to expand...
Click to collapse
Dialed *#0808#, Nothing was selected for USB settings. Selected MTP+ADB, plugged phone in, WORKS! Thank you very much for the easy fix.
novastorm17 said:
Dialed *#0808#, Nothing was selected for USB settings. Selected MTP+ADB, plugged phone in, WORKS! Thank you very much for the easy fix.
Click to expand...
Click to collapse
Cheers mate im glad it workedf or you just trying to support our abandoned ALPHA community.:good:
Wow that code worked like charm
Thanks a lot
got the same issue
But worse , also in download mode it wont find anything,
and since my twrp , freezes from the start... there is nothing much i can think off
tried many different usb cables , computers blabla
anybody ?? please
thastyle said:
But worse , also in download mode it wont find anything,
and since my twrp , freezes from the start... there is nothing much i can think off
tried many different usb cables , computers blabla
anybody ?? please
Click to expand...
Click to collapse
It maybe because of the drivers have you installed samsung drivers for mobile devices or samsung kies(if you install kies you need to disable it before using odin)
piotrekkoz said:
It maybe because of the drivers have you installed samsung drivers for mobile devices or samsung kies(if you install kies you need to disable it before using odin)
Click to expand...
Click to collapse
First of all thanks a billion for trying to get this bootloop from hell fixed
deeply apriciated!! i cant affort a new or even second hand phone..
so this is all i have anywaus..
update installed kies.. updated drivers
uninstalled kies
started odin nothing changed
to be clear this is what i already did
however kies the latest version does find something
i get to enter the SM-G850F
but when i trie serial it says not correct..
Tis is driving completeley insane, i am not someone who gives up , here is the situation again
twrp recovery freezes at the start...
odin or adb wont find my alpha phone..
usb connectior is clean...
no mather what i try also i download mode it wont find my phone so i cant flash an OS on my phone or a new recovey
1) Made sure my phone was in download mode
2) Tried multiple U9 Samsung cables which have previously worked including the original one
3) Reinstalled official Samsung USB drivers
4) Checked my computers device manager for issues
5) Tried every available USB ports (no hub)
6) Restarted everything multiple times
7) multiple computers win 7 8 10
8) Tried ODIN versions 1.83 - 3.07
9) Downloaded all software and drivers again
10) Kies enabled and disabled on my phone
11) Uninstalled Kies on my computer
Hey, whenever i go onto Odin v 1.84 and plug in the usb to the laptop and to my Galaxy ace s5830i, the usual connection in the id area does not appear. I have already downloaded and installed and tested over 20 different samsung drivers, but still no recognition is made from odin when the phone is in download mode, and connected to the laptop. However, this has not always been the case, for i factory reset my laptop yesterday, and before the factory reset, i was able to use odin because it was able to recognise my phone.
This is very concerning for me. Before i factory reset my laptop, i was able to unbrick 8 samsung galaxy aces, but now i cannot unbrick any. I have also had different versions of odin such as odin v 3.09 and odin v 4.38 and still i am unable to get odin to recognise this s5830i. If anybody could send a reply, i would be extremely grateful because i am very desperate to get this working again.
If odin is not working because there are some settings on the laptop that need changing, please tell me! The laptop is back to factory settings, so has the settings as it did in the shop.
For ur info: Laptop= Windows 7 HP Compaq presario CQ57
Phone= Samsung galaxy ace s5830i
Please reply asap, i am very desperate!
Fixed...
After about 17 hours of struggling to fix this problem, i turned to automatic driver update, and this fixed the problem. Next time, it would be extremely useful if you replied to this thread. Thanks anyway :good:
mattadams01 said:
After about 17 hours of struggling to fix this problem, i turned to automatic driver update, and this fixed the problem. Next time, it would be extremely useful if you replied to this thread. Thanks anyway :good:
Click to expand...
Click to collapse
Hello,
I have the same problem, can you explain te me how did u do ?
Connect ur phone to ur laptop via a USB cable when the phone is switched on...u will see driver updates going on on screen... If not go to laptop settings and turn on automatic updates... And try again. Make sure USB debugging is enabled on ur phone in settings, applications and development... Thanks