I was using the SP flash tool to reinstall my Stock Rom.....
I was doing this but for some reason, every time I download, the red bar fills in a few seconds but then nothing else happens…. the timer keeps running but the meter stays at 100% red. What should I do?
NOTE: My Micromax canvas HD is formatted including the bootloader.
Any help would be appreciated.
Related
Ok guys i got at&t e970.
i tried to flash stock rom but accidently i flashed sprint rom and my computer frozen. Than i got totally blank screen.
- when i connect to pc my computer recognize as d/l mode (emergency) red light appears then device disconnects from pc and totally blank
after a few min this happens again again and again.
- i tried to flash at&t fw but i got (this fw is not suitable for your device) error.
- now it is totally blank screen with theese 2 sympthoms any ideas for fix ?
Try flashing this.... http://forum.xda-developers.com/showthread.php?t=2230994
Via LG OG running Rootbox 4.2.2
New formatted my laptop now downloading and i will install flash then i will share the updates.
Flashed nothing changed
Does your screen say download mode? If not and your screen doesn't turn on, no logo or anything and just a blinking side. Notification light then you are screwed
Sent from my LG-E970 using xda premium
So I rooted my Xperia Neo V which was running on ICS by following the complete noob's guide here. After doing that, I wanted to install a custom rom (Jellybean) and kernel, however, I screwed up at this part. I only flashed the boot file of the rom without the kernel and after I was through with it, unplugged the data cable from my PC and started the phone. Now it boots up but all I can see is a black/bluish screen and a purple LED indicator at the start for a few secs. Can't even see any logo. It still goes into the flashboot mode when i connect it to the PC but I can't see anything on the screen, only the blue LED indicator. Has it been bricked or is there a way to revert to previous settings? I have the backup in my PC.
Blue led indicates it's in the fastboot mode - you can flash your kernel form there, then install ROM
Lynx93 said:
So I rooted my Xperia Neo V which was running on ICS by following the complete noob's guide here. After doing that, I wanted to install a custom rom (Jellybean) and kernel, however, I screwed up at this part. I only flashed the boot file of the rom without the kernel and after I was through with it, unplugged the data cable from my PC and started the phone. Now it boots up but all I can see is a black/bluish screen and a purple LED indicator at the start for a few secs. Can't even see any logo. It still goes into the flashboot mode when i connect it to the PC but I can't see anything on the screen, only the blue LED indicator. Has it been bricked or is there a way to revert to previous settings? I have the backup in my PC.
Click to expand...
Click to collapse
You have the rom in your phone just fastboot flash the kernel using cmd as your phone is showing blue led that means you can flash kernel once you flash it, your phone will boot up normally.
The kernel you should use is that present in the zip file.
Hit "Thanks" if i helped.
Sent from my Xperia Neo V using xda premium
u trying to install Jellybean rom
1st - tell us u unlock ur bootloader ???
use CWM and Restore android backup ......
if no android backup then use flashtool and flash ics ....
OR
use SEUS
I have a Symphony W85 MTK-6572...
I recently installed a Custom ROM after which my Phone turns off instantly on the Boot Screen... I can still enter the recovery mode and have tried a lot of ROMs which previously worked on my phone... But now the phone turns off instantly after the boot screen appears...
Finally, I downloaded the correct Stock ROM and tried to flash using SP Flash Tool...
I removed the battery, SD card, sim card, then connected the phone by holding on the vol (+) button, the phone connects and disconnects instantly from the USB port... The MT-65xx Preloader appears and then disappears instantly in the Device Manager... So I cannot install the Stock ROM also...
Please, I am in desperate need help regarding this issue...
Hello Friends. I am new to XDA forums, but i have read and taken tips from you guys many times.
A couple of days ago, i tried to root my canvas Nitro a310. I had rooted it earlier using the Kingoroot app (the one with the green circle with Chinese alphabets.) It worked fine. I wanted to install a new rom, CM12.1 V2 which is on your site. For that, i proceeded to install twrp recovery. But my phone hanged in the fastboot mode. So i took tips from your site again which told me to install the stock recovery using ygdp tool. I did all that, the installation showed 100% complete and then dump was taken. However, after that the phone went blank. completely blank. It does not even show a factory setting blue box as some other members mentioned. It refuses to boot up, does not show the led lights even when charging, and does not connect to PC. When i tried to install the stock rom again, the pc emitted the sound of usb attached, then suddenly removed. This continues in a loop. The connection sound comes, and after 2-3 seconds, disconnection sound comes. I removed the battery and tried to connect again by holding the combination of power key and volume down key. The same sounds kept coming. Even tried on another PC, but the outcome was same. Frustrated, I went to the service center. They asked me to keep the handset for a week which I am not willing to do. Is there anyone who has experienced same problem? I believe its a hardware issue. So any help in the hardware would also be appreciated. Please suggest a way out of this. Thanks in advance.
Hey guys,
My mom's canvas HD, rooted and running MIUI v5 I think with CWM recovery (Ik its old but..) just wont turn on. The charging indicator lights up but the phone will not power on. I plugged it into the wall and tried turning it on again but it beeped once and i haven't touched it since. I tried running a few adb commands and all i get is an error:closed message on the command window.
Is there any fix to this problem guys?
TIA
Try Flashing the stock rom.
umangs544 said:
Try Flashing the stock rom.
Click to expand...
Click to collapse
The phone wont turn on so i cant do that :/
Hey i have an issue, i recently flashed miui7 on my a116 and lost imei and baseband.now its imei is invalid and baseband is unknown i tried everything to overcome but no result so what should i do? Should i flash stock rom via sp flash tool to get back the baseband and then do the imei tweaks plz provide a heavy fix plzzz
You don't have to turn your phone on to flash stock rom.
You can flash through SP Flash Tool.