Ok guys i got at&t e970.
i tried to flash stock rom but accidently i flashed sprint rom and my computer frozen. Than i got totally blank screen.
- when i connect to pc my computer recognize as d/l mode (emergency) red light appears then device disconnects from pc and totally blank
after a few min this happens again again and again.
- i tried to flash at&t fw but i got (this fw is not suitable for your device) error.
- now it is totally blank screen with theese 2 sympthoms any ideas for fix ?
Try flashing this.... http://forum.xda-developers.com/showthread.php?t=2230994
Via LG OG running Rootbox 4.2.2
New formatted my laptop now downloading and i will install flash then i will share the updates.
Flashed nothing changed
Does your screen say download mode? If not and your screen doesn't turn on, no logo or anything and just a blinking side. Notification light then you are screwed
Sent from my LG-E970 using xda premium
Related
Hello friends,am in serious need of help,i plug in my ace to my computer using the cable and kies detected a new firmware which i tried to update to,after downloading finish to 100%,my phone restarted and shows downloading on the screen,for like 1hr it didnt change to any other thing and kies couldnt detect the phone,so i disconnected it from the cable,i removed the battery and inserted it again,now the phone can start up but all i can see on the screen is a computer icon with a phone icon,i dont know what to do,pls help...anybody with useful information or solution should post it here thanks.l
Remove then insert battery. Then try holding volume down and home button while holding power button. Will it go to download mode? If yes, read hubix's tutorial in the development subforum it's a sticky thread.
praisegod1 said:
Hello friends,am in serious need of help,i plug in my ace to my computer using the cable and kies detected a new firmware which i tried to update to,after downloading finish to 100%,my phone restarted and shows downloading on the screen,for like 1hr it didnt change to any other thing and kies couldnt detect the phone,so i disconnected it from the cable,i removed the battery and inserted it again,now the phone can start up but all i can see on the screen is a computer icon with a phone icon,i dont know what to do,pls help...anybody with useful information or solution should post it here thanks.l
Click to expand...
Click to collapse
Next time , use ODIN for flashing firmware . Kies was NEVER EVER reliable .
go to recovery mode perform a factory reset/data wipe that should fix it
Please use ODIN and flash with the one-package file from samfirmware. I did the same when Kies bricked my phone too while upgrading to Gingerbread. It works!
er.davinder said:
go to recovery mode perform a factory reset/data wipe that should fix it
Click to expand...
Click to collapse
Nope, there is no recovery mode accessible either when Kies bricks your phone. Happened to me so. Just a stupid screen with a computer and phone icon with <!> in between them. But anyway my suggestion above of using ODIN should help him out. =)
I am just sharing my experience and hope it helps.
DISCLAIMER: I am not responsible for bricking any phone and/or pc. I am not responsible for any phone or pc damage done by my message here. You are responsible for your own pc and phone. You are responsible for taking risk of upgrading your phone or pc. I just shared my experience in hope if it helps someone.
I had bricked my phone once where I could just see black screen and after some tries white screen and nothing. I removed SD Card and SIM Card and kept it aside. I then removed battery and tried putting phone in download mode. It still did not work then I waited 4-5 min and then inserted battery again. Then I tried putting phone in download mode and it successfully gone in download mode. Then my phone was not getting recognized thru USB cable for ODIN. I changed USB port still same issue then restarted my PC and then I connected phone to USB port and finally got Froyo installed again on my Galaxy Ace thru ODIN.
My phone is bricked
i had samsung galaxy ace gt-s5830 i've rooted my phone and install the super one click to unlock my phone when i restarted the phone its just wont boot the screen goes black and white but i can still access to my download mode i tried to install a new frimware to bring it back to life using odin but is till have the same problem please help and when i flash it using odin it gave me the blue screen that the phone flash pass but it just not booting all what give the screen goes white and black thats it can anyone help me pleasde and i woulf be so thanfulllll please help
buisness_life said:
i had samsung galaxy ace gt-s5830 i've rooted my phone and install the super one click to unlock my phone when i restarted the phone its just wont boot the screen goes black and white but i can still access to my download mode i tried to install a new frimware to bring it back to life using odin but is till have the same problem please help and when i flash it using odin it gave me the blue screen that the phone flash pass but it just not booting all what give the screen goes white and black thats it can anyone help me pleasde and i woulf be so thanfulllll please help
Click to expand...
Click to collapse
Is it stuck at the Galaxy Ace sign or the boot animation ?
Sent from my MSM7227 with Adreno 200 using XDA App
EmoBoiix3 said:
Is it stuck at the Galaxy Ace sign or the boot animation ?
Sent from my MSM7227 with Adreno 200 using XDA App
Click to expand...
Click to collapse
boot animation
okay its an android otimus V , i rooted it a couple days ago, then i tried to install a rom via rom manager, didnt make back up, now when it restarted, the lg screen shows, then it starts to do the roms bootup and its this little animation but during this animation it freezes and thats as far as it will go. also i cant start up recovery with the vol up-home-power, the lg screen flashes, then it goes black, then has the black light up and it just stays like that for hours until i take out the battery, is there anyway to fix my phone!!
have you tried flash via kdz ?
That's how I solve my bricked problem.
In your case I suspect that you don't have any rom, it's like one PC without OS.
mitzkaia said:
have you tried flash via kdz ?
That's how I solve my bricked problem.
In your case I suspect that you don't have any rom, it's like one PC without OS.
Click to expand...
Click to collapse
i dont know how to do that and i cant seem to find a guide for my phone
Hello apparently I bricked my Rom while I tried to reinstall cm 7 or 9 I cant remember from the recovery on clockwork mod I had backup done of that. But then suddenly the phone randomly decided to turn off in the middle of operation. Then the phone wont turn on and if it turns on by some miracle then It just stays at Samsung logo or PC does not recognize it by usb. So I thought that trip to service place would fix it cause i totally bricked the **** out of it lol. Anyways I got told that repair costs 95 eur and that the phone has water damage. Now keep in mind that I keep my phones in dry place and handle them with care in rainy conditions or so. So it is not had any water damage. What impresses me is that they didnt even take it apart. So now im stuck with my bricked phone again and nothing to do. So I was quessing of any specialist could tell me how could I do the unpricking by myself. (Not a noob on tech part) I can sometimes after removing battery and stuff get it in charging mode or download mode but it happens at random.
Maybe u could try soft unbrick ( I think its called so...) The program on the PC will recognize ur phone and it will unbrick ur g5:thumbup:
But please tell me: does the g5 turn on (is it showing any live?)
Sent from my GT-S5360 using xda premium
Well it depends. Sometimes it turns on sometimes it wont sometimes it will start downloading usb drivers while connected to usb and sometimes wont. It just does what it wants but when it turns on its frozen on samsung logo.
Can you get to Odin mode (Yellow triangle)? If you can, try going back to stock. You can get the firmwares at sammobiles.com. Make sure you download the correct firmware. If not working, try flashing ClockworkMod and flash a signed CyanogenMod .zip file. But my problem now, I cant go back to stock. Seems like Odin flashed the stock correctly, but Im stuck at glowing Samsung logo.
Try flashing again?
Yes! Try Odin if the yellow triangle appears. If u cannot get into download mode with button combination try an USB JIG which worked for me like a charm
Odin is the best Option
Sent from my GT-I5500 using xda premium
I reflashed the ROM from samfirmwares but I have the same problem. The phone is stuck in a boot loop after stopping and freezing for a bit at the Samsung sign
Okay. Now when you turn on your phone normally (power button), youll see the glowing samsung logo over and over again right. And it seems to go on until battery empty (I think). Try flashing ClockworkMod instead and see if it boots ClockworkMod. I revived my phone this way, but not able to get to stock.
why don't you go to you're local service?
I have an um-rooted samsung galaxy player 3.6 (running gingerbread 2.3.6) I was browsing an app when suddenly it crashed! the battery was low, so at first I thought to plug it in, but before I did, I noticed that it was rebooting every 4-5 seconds. plugged it in, took out battery, tried putting in recovery (put bat. back in, hold power and both volume buttons) but it vibrates and just goes back into boot loop. it pops up with the samsung logo, stays for 3 or so seconds, screen goes dark, then it does it again.
I have been messing with it. when it starts booting, my computer recognizes it as OMAP3630 which google has told me is the name of the processor. It tries to install drivers but fails due to "umplugged device" when it turns off
Weird! If you have data to recover try using adb logcat to see what's going on. Otherwise reflash with Odin. I have only experienced this problem when using heimdall to flash my us yp-gs1, but it happens right after flashing.
What app were you using when it happened?
Sent from my SGH-I777 using xda app-developers app
a Forum app. It has not been flashed either. it is all stock 2.3.6 gingerbread. if i put the battery in then plug it in (without hitting any power buttons) it goes to a loading circle (that does not move at all) and just stays there. the computer does not recognize it in this state. its only 3 months old, but I have no idea where the recipt is!
weird! im sticking with my answer tho, if you want to fix it then put it in download mode and flash it
if you cant get to download mode then buy a $2 usb jig
Tried it! no luck. got it in download mode. ran odin and It said pass! BUT it only took 3 seconds? and then instead of flashing just samsung then rebooting, it started flashing samsung with a caution symbol under it and rebooting. went to do it again and it says suctom binary current binary:custom. so it seems it worked but did not fix my problem
Did you flash normalboot and factoryfs both?
Sent from my SGH-I777 using xda app-developers app
joshkidner said:
Tried it! no luck. got it in download mode. ran odin and It said pass! BUT it only took 3 seconds? and then instead of flashing just samsung then rebooting, it started flashing samsung with a caution symbol under it and rebooting. went to do it again and it says suctom binary current binary:custom. so it seems it worked but did not fix my problem
Click to expand...
Click to collapse
I had a similar problem with the galaxy player 5.0. Took out my micro sd card from it and somehow that worked. Hasn't gone on any reboot cycle since.
I was gonna try the fs whatever one, but now i cannot get my computer to recognize it! i tried another factory reset and that didnt help. i got it to work once. Guess I will have to keep trying? I got school so I cant do it now (16, junior in High school)
yep you'll need to get to download mode to flash it. like i said before, a $2 usb jig will always do the trick (i loooove mine)
I dont have any problem getting it into download mode, my problem is getting the computer to recognize it. gonna have to try it on a dif computer I guess, which is weird, because I got it to work once, but now it wont. I flashed the normalboot the first time, what did i do wrong? should I have flashed the other (fs or whatever is is) one instead? thanks for the help!
When I'm in a bootloop after heimdall testing I need to flash factoryfs. For you I would say flash both. Try another cable/ try another USB port
Sent from my SGH-I777 using xda app-developers app
I was in download mode and attempted to odin back to stock and it failed. see screenshot attached. Now my phone is stuck on the little cell phone and computer symbol connected by a triangle in between. its the same as shown in this video.. .Now I cant get it to download mode...
Any help would be appreciated... .
phone is stuck at the symbol shown in the start of this video
http://www.youtube.com/watch?v=9nMCBbdAcHU
Had this same problem recently. What I did was try to put it in download mode again by holding the up and down volume keys and plugging in the cable, it would show up as the icon as you mentioned but the computer would recognize it to be in download mode. I would then use odin like normal. Are you sure you are using the correct .pit and .pda file just in case?
wkenworthy10 said:
Had this same problem recently. What I did was try to put it in download mode again by holding the up and down volume keys and plugging in the cable, it would show up as the icon as you mentioned but the computer would recognize it to be in download mode. I would then use odin like normal. Are you sure you are using the correct .pit and .pda file just in case?
Click to expand...
Click to collapse
So I used another computer this time....still had that computer and cell phone icons on the screen...but as you said ...i just opened AIO tool and used odin to flash it to stock..it worked this time...and once done... i checked the phone which was working and quickly rooted and installed a FROYO custom rom.
thanks again
stuck at samsung vibrant screen after flashing with odin
i have a problem, can anyone help me plss. my phone got stuck at samsung vibrant screen after flashing it back to stock using odin. i keep repeating the flashing many times, it was successful i think because it says pass so i keep it still and not removing the usb plug until my phone turns on but then my phone stuck at samsung vibrant screen ..huhu what to do? plss help me guyss
jonna19 said:
i have a problem, can anyone help me plss. my phone got stuck at samsung vibrant screen after flashing it back to stock using odin. i keep repeating the flashing many times, it was successful i think because it says pass so i keep it still and not removing the usb plug until my phone turns on but then my phone stuck at samsung vibrant screen ..huhu what to do? plss help me guyss
Click to expand...
Click to collapse
Use this to go to download mode and flash with Odin again.
http://forum.xda-developers.com/showthread.php?p=48458994
Sent from my SGH-T959 using xda app-developers app