How downgrade GT-I9100 from K.K neatrom 4.4.4 to JB neatrom 4.1.2
Nothing special. Just make sure you do a full wipe before flashing.
svbarbosa said:
Nothing special. Just make sure you do a full wipe before flashing.
Click to expand...
Click to collapse
Thank you sir,is it possible Wipe and Flash new Rom through TWRP or I have to flash PhilZ CWM first, and do from CWM ?
Esk_maghdouni said:
Thank you sir,is it possible Wipe and Flash new Rom through TWRP or I have to flash PhilZ CWM first, and do from CWM ?
Click to expand...
Click to collapse
TWRP is fine. It is the only one I use in all my devices.
svbarbosa said:
TWRP is fine. It is the only one I use in all my devices.
Click to expand...
Click to collapse
Thanks a lot
Sorry. Posted in wrong thread.
Related
how to install a rom without a cwm bootloop?
Make sure you're on latest twrp or cwm or don't flash aokp rom's. That should generally be it
Sent from my sgs2 running cm9
Makrilli said:
Make sure you're on latest twrp or cwm or don't flash aokp rom's. That should generally be it
Sent from my sgs2 running cm9
Click to expand...
Click to collapse
but if i flash the latest twrp with cwm touch(not last version) than i also not get a bootloop?
leime68 said:
but if i flash the latest twrp with cwm touch(not last version) than i also not get a bootloop?
Click to expand...
Click to collapse
Theres a repacked cwm touch in drv section that also has the fix.
sent from my i9250
The best is to flash recovery with fastboot to avoid the risk.
And I have aokp and no bootloop....
what i did was i followed hanzoo guide about unlocking bootloader and then when i already unlocked and have a cwm international installed and supersu i followed his guide on how to flash a rom so im hyped to try my first custom rom i went to recovery made a backup and downloaded this rom ROM 05/2/13 Cm10.1 4.2.1 hox+ international, first i backup then i "click Wipe. Wipe Cache, Dalvik, Factory Reset and System" and then i flash this zip in recovery and installed the rom and i forgot to install the gapps 4.2 now im stuck in the cynogenmod logo. can i still fix this please help!
Flash the correct kernel
Notechis said:
Flash the correct kernel
Click to expand...
Click to collapse
which kernel sir please help i dunno which one i should download so im scared im might never use my phone again,,
http://goo.im/devs/maxwen/BLADE/boot-BLADE-CM10.1-201302241749.img
FOLLOW THIS THREAD
http://forum.xda-developers.com/showthread.php?t=2027201
Notechis said:
http://goo.im/devs/maxwen/BLADE/boot-BLADE-CM10.1-201302241749.img
FOLLOW THIS THREAD
http://forum.xda-developers.com/showthread.php?t=2027201
Click to expand...
Click to collapse
sir just a question should i use hanzoo all in one kit to flash that kernel? because i dont have that TWRP recovery.
Yes, use the toolkit to flash a kernel.
Always use a custom recovery like TWRP or CWM to make a backup before flashing something - 1 st RULE
Notechis said:
Yes, use the toolkit to flash a kernel.
Always use a custom recovery like TWRP or CWM to make a backup before flashing something - 1 st RULE
Click to expand...
Click to collapse
thank you so much my phone is working now, uhm after this how can i install twrp sir
Download it and flash it, using the toolkit,too.
- use the right version
Notechis said:
Download it and flash it, using the toolkit,too.
- use the right version
Click to expand...
Click to collapse
Half the issues you guys have, is cause you use toolkits n such to do the simplest of tasks like flash a kernel.
Sent from my HTC One X+ using Tapatalk 2
AndroHero said:
Half the issues you guys have, is cause you use toolkits n such to do the simplest of tasks like flash a kernel.
Sent from my HTC One X+ using Tapatalk 2
Click to expand...
Click to collapse
i agree it just over complicates things, just a simple adb\fastboot command and done..
fastboot is a whole lot easier.
Sent from my HTC One X+ using xda premium
I'm going to install Paranoid Android 4.3 on my Galaxy S2. Please suggest a Kernel.
http://forum.xda-developers.com/showthread.php?t=2020336
Stock only atm.
andrewwright said:
Stock only atm.
Click to expand...
Click to collapse
I didn't get you. you meant the sock kernel?
Yes no options for other kernels. Stock only on 4.3 atm. Give it time and you will have a choice.
andrewwright said:
Yes no options for other kernels. Stock only on 4.3 atm. Give it time and you will have a choice.
Click to expand...
Click to collapse
Thanks for the quick reply.!
Heard this from another thread, to install Paranoid, you don't need to root. Is it true.!?
caspertechno said:
I didn't get you. you meant the sock kernel?
Click to expand...
Click to collapse
As for now after flashing the ROM don't change it. Just use what is bundled along
caspertechno said:
Thanks for the quick reply.!
Heard this from another thread, to install Paranoid, you don't need to root. Is it true.!?
Click to expand...
Click to collapse
Root is already done on custom roms. 4.3 has developers options and root in there. If you dont see dev options tap build about 5 times and it will come up in menu.
Edit: do you mean your on stock rom and no root? If so yes you need to root first. Sorry haven't read posts to well today.
What firmware do you have? Gb/ics/jb?
caspertechno said:
Thanks for the quick reply.!
Heard this from another thread, to install Paranoid, you don't need to root. Is it true.!?
Click to expand...
Click to collapse
ROM = Root, you will need root
andrewwright said:
Root is already done on custom roms. 4.3 has developers options and root in there. If you dont see dev options tap build about 5 times and it will come up in menu.
Edit: do you mean your on stock rom and no root? If so yes you need to root first. Sorry haven't read posts to well today.
What firmware do you have? Gb/ics/jb?
Click to expand...
Click to collapse
Yes, I'm on stock ROM. I'm on JellyBean 4.1.2.
For stock jb root use philz kernel. Any new one will do. Btw you do have a i9100 model?? Makes a dif it its a p or g and so on model. Your new to all this yes??
yo andrewwright, which rom and kernel are you on ?
andrewwright said:
For stock jb root use philz kernel. Any new one will do. Btw you do have a i9100 model?? Makes a dif it its a p or g and so on model. Your new to all this yes??
Click to expand...
Click to collapse
I had rooted an HTC Desire, for Cyanogen. First with Samsung and Paranoid. Btwn I have i9100 model.
So pick say lss philz zip and flash that in recovery. Make sure you put it on ext sd and go to recovery and then update. Reboot and root with cwm recovery is done. Then follow op in pa for how to install pa rom.
Im on biftor v11 with apollo kernel.
andrewwright said:
So pick say lss philz zip and flash that in recovery. Make sure you put it on ext sd and go to recovery and then update. Reboot and root with cwm recovery is done. Then follow op in pa for how to install pa rom.
Im on biftor v11 with apollo kernel.
Click to expand...
Click to collapse
Thanks. Will give it a try.!
Hi guys, i just got a S2 from a relative of mine and i'm quite new to the flashing and stuff for S2. P.S (My previous device was much more easier).
And so i decided to try out RR (Resurrection Remix). I was on 4.1.2 stock, so i tried to root via, both, Siyah and Dorimanx. After rooting them, boot up, i then proceed on to flash RR and GAPPS. But it didn't work. So, how do i exactly go about flashing RR?
Did i do something wrong? Can someone help me a bit?
imadiu said:
Hi guys, i just got a S2 from a relative of mine and i'm quite new to the flashing and stuff for S2. P.S (My previous device was much more easier).
And so i decided to try out RR (Resurrection Remix). I was on 4.1.2 stock, so i tried to root via, both, Siyah and Dorimanx. After rooting them, boot up, i then proceed on to flash RR and GAPPS. But it didn't work. So, how do i exactly go about flashing RR?
Did i do something wrong? Can someone help me a bit?
Click to expand...
Click to collapse
Me personally prefer Philz kernal which adds a great CWM with the option to delete all data for installing a new rom
http://forum.xda-developers.com/showthread.php?t=1877270
Are you sure you have downloaded RR for your i9100 variant?
stonedpsycho said:
Me personally prefer Philz kernal which adds a great CWM with the option to delete all data for installing a new rom
http://forum.xda-developers.com/showthread.php?t=1877270
Are you sure you have downloaded RR for your i9100 variant?
Click to expand...
Click to collapse
I'm sure I did. So you suggest me using Philz kernel to root my phone? Does it work on the Jb 4.1.2 stock?
Sent from my GT-I8150 using XDA Premium 4 mobile app
imadiu said:
I'm sure I did. So you suggest me using Philz kernel to root my phone? Does it work on the Jb 4.1.2 stock?
Sent from my GT-I8150 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes m8, it is for samsung/based roms.
After rooting my phone with Philz kernel, I can proceed on with flashing any ROM?
Sent from my GT-I8150 using XDA Premium 4 mobile app
imadiu said:
After rooting my phone with Philz kernel, I can proceed on with flashing any ROM?
Sent from my GT-I8150 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes m8. Make sure you read the install instructions on the OP of the rom. Cyanogenmod you flash the rom then wipe data where with neatrom you wipe data first. If you have to wipe data after flash dont select the option to wipe all data to install a new rom. Philz kernal is only for samsung stock/based roms so dont put on RR. When you flash RR it will put their kernal on during flash.
stonedpsycho said:
Yes m8. Make sure you read the install instructions on the OP of the rom. Cyanogenmod you flash the rom then wipe data where with neatrom you wipe data first. If you have to wipe data after flash dont select the option to wipe all data to install a new rom. Philz kernal is only for samsung stock/based roms so dont put on RR. When you flash RR it will put their kernal on during flash.
Click to expand...
Click to collapse
In this case, what if i want flash RR, how?
imadiu said:
In this case, what if i want flash RR, how?
Click to expand...
Click to collapse
Follow these instructions
1.- Wipe data / factory reset (mandatory if you coming from STOCK OR 4.2.X version or another ROM)
2.- Install the Main ROM
3- install gapps
4.- When you're back on recovery go to Advanced
5.- Wipe Dalvik Cache
6.- Fix Permissions
7.- Wipe Cache Partition
8.- Reboot
got from RR op.
stonedpsycho said:
Follow these instructions
1.- Wipe data / factory reset (mandatory if you coming from STOCK OR 4.2.X version or another ROM)
2.- Install the Main ROM
3- install gapps
4.- When you're back on recovery go to Advanced
5.- Wipe Dalvik Cache
6.- Fix Permissions
7.- Wipe Cache Partition
8.- Reboot
got from RR op.
Click to expand...
Click to collapse
Can i have a more advanced instructions starting from Stock 4.1.2?
Because i have tried a lot of different ways to flash RR, or PAC, or even stock roms like Optimus. But i still fail. Really don't know how to continue...
imadiu said:
Can i have a more advanced instructions starting from Stock 4.1.2?
Because i have tried a lot of different ways to flash RR, or PAC, or even stock roms like Optimus. But i still fail. Really don't know how to continue...
Click to expand...
Click to collapse
Have you rooted you phone? And got CWM(clockworkmod) recovery?
If so just download the rom, place it on you sd card, boot into recovery and follow the steps in my previous post.
If you not rooted or dont have CWM recovery got to the link below and download the zip file which will then both root and give you CWM.
---------- Post added at 03:33 PM ---------- Previous post was at 03:30 PM ----------
stonedpsycho said:
Have you rooted you phone? And got CWM(clockworkmod) recovery?
If so just download the rom, place it on you sd card, boot into recovery and follow the steps in my previous post.
If you not rooted or dont have CWM recovery got to the link below and download the zip file which will then both root and give you CWM.
Click to expand...
Click to collapse
Have a look at this video, diff phone but same method
http://www.youtube.com/watch?v=nxTwGwtUBbk
imadiu said:
Can i have a more advanced instructions starting from Stock 4.1.2?
Because i have tried a lot of different ways to flash RR, or PAC, or even stock roms like Optimus. But i still fail. Really don't know how to continue...
Click to expand...
Click to collapse
Yes, I had similar experience when I started flashing roms on i9100. Stick with it, it really is worth it and once you get the first one you will realise just how easy it is.
Check this post out for detailed info
http://forum.xda-developers.com/showthread.php?t=1826497
maybe try a different ROM, PAC or Carbon work well imho.
good luck
Jimsilver73 said:
Yes, I had similar experience when I started flashing roms on i9100. Stick with it, it really is worth it and once you get the first one you will realise just how easy it is.
Check this post out for detailed info
http://forum.xda-developers.com/showthread.php?t=1826497
maybe try a different ROM, PAC or Carbon work well imho.
good luck
Click to expand...
Click to collapse
Do you still remember how flash custom roms all the way from the beginning at stock? I've been doing it for days and all the roms seem to boot forever
stonedpsycho said:
Have you rooted you phone? And got CWM(clockworkmod) recovery?
If so just download the rom, place it on you sd card, boot into recovery and follow the steps in my previous post.
If you not rooted or dont have CWM recovery got to the link below and download the zip file which will then both root and give you CWM.
---------- Post added at 03:33 PM ---------- Previous post was at 03:30 PM ----------
Have a look at this video, diff phone but same method
http://www.youtube.com/watch?v=nxTwGwtUBbk
Click to expand...
Click to collapse
Well, i rooted my phone use Siyah's kernel. Is that good enough? CWM is then based on Siyah kernel
imadiu said:
Well, i rooted my phone use Siyah's kernel. Is that good enough? CWM is then based on Siyah kernel
Click to expand...
Click to collapse
Yes that is good enough
Hello everyone,
Today I tried to install a new rom on my Samsung Galaxy SII I9100 but I got some problems.
I had already rooted my phone and installed Philz recovery.
The problem is that I keep getting the same error: status 7. I saw I need to update my Philz recovery but I don't understand how to do that. Can someone help me with that? After I update the recovery I want to install the rom Beanstalk with Google Apps is this compatible?
Thanks in advance for your help!
samzelf said:
Hello everyone,
Today I tried to install a new rom on my Samsung Galaxy SII I9100 but I got some problems.
I had already rooted my phone and installed Philz recovery.
The problem is that I keep getting the same error: status 7. I saw I need to update my Philz recovery but I don't understand how to do that. Can someone help me with that? After I update the recovery I want to install the rom Beanstalk with Google Apps is this compatible?
Thanks in advance for your help!
Click to expand...
Click to collapse
If u see the OP (First post) of any KK rom thread u will find the Link for the KK compatible kernel (with latest CWM recovery), dwnld the same and flash it using 'Philz' recovery and then u are ready to flash any KK rom
Sun90 said:
If u see the OP (First post) of any KK rom thread u will find the Link for the KK compatible kernel (with latest CWM recovery), dwnld the same and flash it using 'Philz' recovery and then u are ready to flash any KK rom
Click to expand...
Click to collapse
Thank you for you reply. I can't see the kernel download link on the Beanstalk rom tread: http://forum.xda-developers.com/gal...tives/rom-beanstalk-i9100-unofficial-t2580489
Could you help me with this?
samzelf said:
Thank you for you reply. I can't see the kernel download link on the Beanstalk rom tread: http://forum.xda-developers.com/gal...tives/rom-beanstalk-i9100-unofficial-t2580489
Could you help me with this?
Click to expand...
Click to collapse
Find the same in the link below
http://mirror21.downloadandroidrom.com/file/GalaxyS2/recovery/CWM-KitKatCompatible-i9100.zip
Sun90 said:
Find the same in the link below
Thank you very much!
So I need to go to Philz recovery then then install zip from SD card then select the Recovery and after that reboot?
Click to expand...
Click to collapse
samzelf said:
Sun90 said:
Find the same in the link below
Thank you very much!
So I need to go to Philz recovery then then install zip from SD card then select the Recovery and after that reboot?
Click to expand...
Click to collapse
place both the zip file the cwm one as well as the KK rom (beanstalk in your case) on ur phones internal sdcard.
then reboot to philz recovery and first flash the CWM zip and then again reboot back to recovery.
Do all the wipes using the latest CWM recovery as per the install instruction on the Bean stalk thread and flash the rom.
Click to expand...
Click to collapse
Sun90 said:
samzelf said:
place both the zip file the cwm one as well as the KK rom (beanstalk in your case) on ur phones internal sdcard.
then reboot to philz recovery and first flash the CWM zip and then again reboot back to recovery.
Do all the wipes using the latest CWM recovery as per the install instruction on the Bean stalk thread and flash the rom.
Click to expand...
Click to collapse
Thank you very much! You are awesome. Beanstalk is now running on my phone. Last question: I installed the rom but not gapps, can install gapps later without the wipes?
Click to expand...
Click to collapse
samzelf said:
Sun90 said:
Thank you very much! You are awesome. Beanstalk is now running on my phone. Last question: I installed the rom but not gapps, can install gapps later without the wipes?
Click to expand...
Click to collapse
Yes, U can install the same later without any wipes
Enjoy the Rom for now
Click to expand...
Click to collapse
Sun90 said:
samzelf said:
Yes, U can install the same later without any wipes
Enjoy the Rom for now
Click to expand...
Click to collapse
Thank you, awesome rom.
I got a error message when flashing the Gapps: insufficient storage space available in system partition gapps
And later status 7
Could you help me for the last time?
Click to expand...
Click to collapse
samzelf said:
Sun90 said:
Thank you, awesome rom.
I got a error message when flashing the Gapps: insufficient storage space available in system partition gapps
And later status 7
Could you help me for the last time?
Click to expand...
Click to collapse
Try installing a slim/micro/mini gapps package. The gapps package you are trying to flash requires more space as there are more apps associated to it. The packages I mentioned has only the essential gapps for your system. You can search for them on xda.
Click to expand...
Click to collapse
banjara said:
samzelf said:
Try installing a slim/micro/mini gapps package. The gapps package you are trying to flash requires more space as there are more apps associated to it. The packages I mentioned has only the essential gapps for your system. You can search for them on xda.
Click to expand...
Click to collapse
Thanks for helping, I used the micro gapps package.
Click to expand...
Click to collapse