At first, hello to all of you
I had CWM 5 on my Galaxy I9300, and I installed 4.3.1 CM custom rom, and downloaded gapps for 4.3, but google play crashed everytime. Then I flashed CWM via odin, and i installed v 6.0.4.5 but with this version I couldnt " wipe dalvik cache" so I flashed v 6.0.4.6 but it wont open in recovery, then I flashed another one, and when I turned the device on, the touch screen was not responding, it booted regulary, then I tried 4.1.2 CM custom rom, but the problem is the same. I have no carrier, where to find stock rom, or what to do?, here are some photos I wont do anything on my own, to avoid more demage. Thanks for help
Zlajaaa said:
At first, hello to all of you
I had CWM 5 on my Galaxy I9300, and I installed 4.3.1 CM custom rom, and downloaded gapps for 4.3, but google play crashed everytime. Then I flashed CWM via odin, and i installed v 6.0.4.5 but with this version I couldnt " wipe dalvik cache" so I flashed v 6.0.4.6 but it wont open in recovery, then I flashed another one, and when I turned the device on, the touch screen was not responding, it booted regulary, then I tried 4.1.2 CM custom rom, but the problem is the same. I have no carrier, where to find stock rom, or what to do?, here are some photos I wont do anything on my own, to avoid more demage. Thanks for help
Click to expand...
Click to collapse
Whats the exact file name of the recovery you flashed or a link to it?
Zlajaaa said:
I flashed v 6.0.4.6 but it wont open in recovery, then I flashed another one
Click to expand...
Click to collapse
You blew the digitiser by flashing a recovery from another s3 model, there is no fix apart from replacing the screen assembly.
Jes, the digitiser is blown. Can i replace just him, cuz the display is working?
No, they are glued together.
Related
Hello people....
I am new to SGS3 xda forum....i am from Pakistan...its been 2 weeks since i bought a SGS3 (second hand)...probably of 3mobile U.K...i was told by the seller that the phone was unlocked in Pakistan....as i tried system update from settings...it said that my phone was modified and could not be updated....so i decided to install CWM Touch on my SGS3 in order to create backup of my current stock ROM (4.1.1)...my phone is not rooted yet....i followed the instructions given in the following link:
http://jellybean-news.blogspot.com/2013/02/complete-guide-to-install-clockworkmod.html
Odin took 1 second and my phone was booted....Odin gave the Message ''Pass!''...everything went fine as it should have been...but when i went into the recovery mod...Stock Android Recovery is opening instead of CWM Touch....noting my phone is not rooted yet....it is also normally booting and everything is fine....can anybody guide me about the problem that i am currently facing...and its solution as well....?? Help Would Be Appreciated...
Edit:Just Flashed CF-Root Pakcage Including SuperSU and CWM Manager with CWM v5.5.0.4....now it goes into CWM...but still one noob question....have my previous stock android recovery and CWM Touch been automatically deleted/replaced?...or they still exist?? Thanks
Sounds like you were trying to install a cwm without being rooted.
Cwm replaces the stock android recovery. You could now try flashing the cwm touch through your current cwm. Make sure its a zip. If you come and ask for help You should really follow a guide on xda though. They are the best guides around.
Shehram Ahmad said:
Edit:Just Flashed CF-Root Pakcage Including SuperSU and CWM Manager with CWM v5.5.0.4....now it goes into CWM...but still one noob question....have my previous stock android recovery and CWM Touch been automatically deleted/replaced?...or they still exist?? Thanks
Click to expand...
Click to collapse
When you flash a recovery you will delete the previous recovery in doing so, your stock and touch are both gone - replaced with v5.5.0.4.
You can now boot into CWM and install a better recovery, try Philz touch recovery for instance.
I'm new to this forum and find the i717 a wee bit more complicated than my old phone. (a Galaxy S 4g.)
I've managed to get CWM touch 5.5.0.4 on the phone and have successfully flashed the deodexed stock jelly bean rom. However when I try to flash any of the "quincy.att" based rom, CWM gives me an error, which I imagine means that I need a more recent CWM. Before I flashed stock jelly bean, I was able to get the 6.0.3.6 quincy.att CWM on the phone using the terminal but when I tried using it, it did not see the external sdcard and I could not get there to flash any rom. I tried using ODIN to flash CWM 5.8.4.3 but ODIN just sat there and nothing got loaded onto the phone at all.
So it is kind of a chicken and egg situation here. What is the minimum version of CWM I need to flash any of the quincy.att roms and how do I get it on there and working? Or am I supposed to use TWRP? I haven't tried that. I remember it from the 4g and it was a pain to use on that phone. I have tried to flash the 10.1 quincy.att plain Cyanogen and the chameleon rom and I just get error messages from CWM,
Just use twrp.....your probably getting error 7 ...install twrp
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
TWRP is piece of cake here. you will never look back
I'm having issues getting cwm 6.0.4.4 to work.... 6.0.4.3 touch or regular work just fine, but the few times I've tried flashing 6.0.4.4 in order to flash the latest Kit Kat I get stuck in a bootloop. The only way to fix it is to remove my battery, flash twrp with Odin, wipe everything, flash cwm (earlier than 6.0.4.4) and reflash a ROM. I've tried: updating through ROM manager, flashing 6.0.4.4 in recovery, converting a zip to a tar (thinking maybe the file was corrupted). I'm beginning to think my phone just doesn't like Kit Kat.... Now I'm back on Padawan because it's like literally the most stable ROM for my phone. Any ideas?
longhairdaddy said:
I'm having issues getting cwm 6.0.4.4 to work.... 6.0.4.3 touch or regular work just fine, but the few times I've tried flashing 6.0.4.4 in order to flash the latest Kit Kat I get stuck in a bootloop. The only way to fix it is to remove my battery, flash twrp with Odin, wipe everything, flash cwm (earlier than 6.0.4.4) and reflash a ROM. I've tried: updating through ROM manager, flashing 6.0.4.4 in recovery, converting a zip to a tar (thinking maybe the file was corrupted). I'm beginning to think my phone just doesn't like Kit Kat.... Now I'm back on Padawan because it's like literally the most stable ROM for my phone. Any ideas?
Click to expand...
Click to collapse
If 6.0.4.3 touch works "fine", why don't you just use that?
veningTrMarchal
tube517 said:
If 6.0.4.3 touch works "fine", why don't you just use that?
Click to expand...
Click to collapse
cwm 6.0.4.4 is recommended for the Unofficial AOKP 4.4.2 flash and I couldn't get it to install with 6.0.4.3. It installs with 6.0.4.4 but ends up in a bootloop.
longhairdaddy said:
cwm 6.0.4.4 is recommended for the Unofficial AOKP 4.4.2 flash and I couldn't get it to install with 6.0.4.3. It installs with 6.0.4.4 but ends up in a bootloop.
Click to expand...
Click to collapse
Try CM11 for KitKat. It's very stable.
tube517 said:
Try CM11 for KitKat. It's very stable.
Click to expand...
Click to collapse
I actually did try CM11 Kit Kat and liked it but about ten minutes after everything boots up it will force close and go into a boot loop. I've tried the various gapps packages, installing without gapps then flashing them, wiping dalvic before and after and in between, I dunno.
4.3 ROMs run like a diesel, it just seems I can't get 4.4s to be stable. I just now flashed the Beanstalk 4.4.2 along with the updated gapps and can't get past the beanstalk animation. Sat there for an hour.
I appreciate the input though.
longhairdaddy said:
I actually did try CM11 Kit Kat and liked it but about ten minutes after everything boots up it will force close and go into a boot loop. I've tried the various gapps packages, installing without gapps then flashing them, wiping dalvic before and after and in between, I dunno.
4.3 ROMs run like a diesel, it just seems I can't get 4.4s to be stable. I just now flashed the Beanstalk 4.4.2 along with the updated gapps and can't get past the beanstalk animation. Sat there for an hour.
I appreciate the input though.
Click to expand...
Click to collapse
I had the same issues with 4.4 kitkat roms. Did you format system in CWM when wiping? This solved my bootloop issues. Also, make sure you have a clean download of the ROM. Flash the ROM twice back to back when flashing a new kitkat rom
------------- SOLVED! --------------
Hello all,
First of all I want to say I'm pretty new to flashing ROMs etc.
Currently I'm at stock 4.3 Jellybean and I want to flash my SGS3 to the new CM 11 ROM.
I rooted my phone following this tutorial: vvvvvv.telefoonrooten.nl/samsung/samsung-galaxy-s3-root/ (sorry if its in Dutch, but it uses the CF-Root-SGS3-v6.3 and Odin).
After I rooted I copied both the CM11 ROM and GAPPS to my external SD, I went to recovery and tried to install the new custom ROM but I got an error (status 7) and it was aborted.
Also if I try to reboot it won't boot normally as it should be but it goes back to recovery mode automatically...
I fixed to get back to Jellybean by flashing the stock rom (unrooting?) it via Odin.
Anyone else got the exact same problem as I do and knows a solution to be able to flash CM 11?
Thanks in advance,
Steelbear
Steelbear said:
Anyone else got the exact same problem as I do and knows a solution to be able to flash CM 11?
Click to expand...
Click to collapse
please read the thirst post in a rom/kernel/whatever thread. and maybe if you havent done it already you should also read the stickies in general section.
FAQ (Read before post !!)
- If you obtain Error 7 when you tried to install ROM in CWM or TWRP
Install the latest version of CMW or TWRP
Click to expand...
Click to collapse
BTW latest philz touch recovery works too
Since you went back to stock and you already know how to root, I suggest you go to Play Store and download ROM Manager to help you install latest CWM recovery on your device.
Or you can simply go to CWM website, pick the version of the recovery for your phone and flash it via Odin.
Hope it helps.
Steelbear said:
Hello all,
First of all I want to say I'm pretty new to flashing ROMs etc.
Currently I'm at stock 4.3 Jellybean and I want to flash my SGS3 to the new CM 11 ROM.
I rooted my phone following this tutorial: vvvvvv.telefoonrooten.nl/samsung/samsung-galaxy-s3-root/ (sorry if its in Dutch, but it uses the CF-Root-SGS3-v6.3 and Odin).
After I rooted I copied both the CM11 ROM and GAPPS to my external SD, I went to recovery and tried to install the new custom ROM but I got an error (status 7) and it was aborted.
Also if I try to reboot it won't boot normally as it should be but it goes back to recovery mode automatically...
I fixed to get back to Jellybean by flashing the stock rom (unrooting?) it via Odin.
Anyone else got the exact same problem as I do and knows a solution to be able to flash CM 11?
Thanks in advance,
Steelbear
Click to expand...
Click to collapse
I had the same problem the fix is quite easy
flash the latest CWM 6.0.4.4 and flash cm11 it will work fine
Blackwolf10 said:
I had the same problem the fix is quite easy
flash the latest CWM 6.0.4.4 and flash cm11 it will work fine
Click to expand...
Click to collapse
Indeed it worked! I found it out myself yesterday. Went to the CWM site and downloaded the latest version (6.0.4.4.) and flashed it through Odin. But thanks for your input anyways (to all who replied) !
An alternative solution that I often use is to open the Updater Script in META-INF folder in the ROM's zip and delete first lines, where it gets device model as property.
Obviously it's an UNSAFE operation (because that lines avoid to install ROMs of other phone on mine) but when I'm sure that ROM I've downloaded is for my phone I do it and it works
i tried to flash the omnirom ,and i get error [7] and now my phone is stucked in cwm ,and if i reboot it keeps coming back on cwm,what can i do ?
alecore said:
i tried to flash the omnirom ,and i get error [7] and now my phone is stucked in cwm ,and if i reboot it keeps coming back on cwm,what can i do ?
Click to expand...
Click to collapse
please read EVERYTHING on the first post of a rom thread (btw also all other threads):
FAQ:
Q: Why do I get error code 7 when trying to flash ?
A: Because you are using old recovery. Update to the latest TWRP.
Click to expand...
Click to collapse
latest CWM or philz are working as well.
try to flash one of them (the latest) and reflash the rom.
sorry if this sounds a bit angry, but it's already the second time today that I answer such a question. In future please search first before asking a question
i already got the lastest cwm 6.0.3.2
can you leave me a official firmware 4.3 international please?
i can't find a twrp to flash .need help
any help ? still don't know what to do
For S3 International latest CWM is 6.0.4.3. You can easily install it through Play Store using Rom Manager(but it requires root)
Or you can go to CWM webpage , download the recovery for your model and flash it via Odin.
managed by me ,i installed cm for 4.3 and it runs perfectly ,now i have to download twrm and trying to install omni rom but later
Hello,
I have SGS3 i9300 that was installed on it Cyanogenmod 11 for along time and it working great!!
until i did some mistake because i have a problem with the power button and i thought it was the CM that cause this resets.... but now it's too late/
i fix the problem and tried to install CM11 back, but the phone showing black screen after the Samasung s3 logo... and nothing.
the steps that i try is:
1. install recover CWM and install ROMs.
2. install recover TWRP and install ROMs.
3. install Stock Rom from Odin.
4. install CM10 snapshot or CM11 nightly.
5. binary code reset.
6. install throw CM windows installer.
7. install BlissPop.
none of the above works :crying:
the only ROM that i manage to install where "Android Revolution HD 29.0"
PLEASE HELP ME....
thanks
were you running a custom kernel also?
Phantogenic said:
were you running a custom kernel also?
Click to expand...
Click to collapse
i don't know
but i do install Stock Rom
Does it not change to the Stock Kernel?
UP
up please i still get my phone work
i recently install stock rom 4.0.2
and this work but when i do upgrade with Kies or even Odin to new version
i get this problem with the black screen immediately after the Smasung S3 logo :crying:
please help