I can't find how to do it.
Can anyone give me instructions?
Thanks a lot.
stzahi said:
I can't find how to do it.
Can anyone give me instructions?
Thanks a lot.
Click to expand...
Click to collapse
You can't,that's impossible.
Sent from my Razr XT910
welder73 said:
You can't,that's impossible.
Sent from my Razr XT910
Click to expand...
Click to collapse
OK, Thanks. So how can I install JB/KK on my ics xt910 ?
Thanks for helping
stzahi said:
OK, Thanks. So how can I install JB/KK on my ics xt910 ?
Thanks for helping
Click to expand...
Click to collapse
You can flash official JB with RSD Lite via computer/laptop.
About KK,root the phone,install custom recovery like Safestrap or BootMenuManager and happy flashing.
Sent from my Razr XT910
welder73 said:
You can flash official JB with RSD Lite via computer/laptop.
About KK,root the phone,install custom recovery like Safestrap or BootMenuManager and happy flashing.
Sent from my Razr XT910
Click to expand...
Click to collapse
Thanks again for the fast reply.
I've rooted the phone and installed CWM on it.
Flashed KK rom and the phone just crashed.
I needed to recover it using RSD Lite.
Then I tried to compare the process to my Motorola Photon's process, and realized that the Razr's bootloader is locked. So how will any custom recovery manage to install a different kernel rom on the device (without unlocking the bootloader) ?
Thank you very much. :good:
stzahi said:
Thanks again for the fast reply.
I've rooted the phone and installed CWM on it.
Flashed KK rom and the phone just crashed.
I needed to recover it using RSD Lite.
Then I tried to compare the process to my Motorola Photon's process, and realized that the Razr's bootloader is locked. So how will any custom recovery manage to install a different kernel rom on the device (without unlocking the bootloader) ?
Thank you very much. :good:
Click to expand...
Click to collapse
Don't use any other recovery except SS and BMM.
I can't explain proffesional but they allow custom roms to boot with the custom (kexec) kernel.
Most people around here are using SS,I prefer BMM but the support for it is discontinued,don't worry,just use one of them.
And read a little before you start anything
Sent from my Razr XT910
welder73 said:
Don't use any other recovery except SS and BMM.
I can't explain proffesional but they allow custom roms to boot with the custom (kexec) kernel.
Most people around here are using SS,I prefer BMM but the support for it is discontinued,don't worry,just use one of them.
And read a little before you start anything
Sent from my Razr XT910
Click to expand...
Click to collapse
Good morning,
Thank you, I'll try it and update here.
Have a nice day. :good:
stzahi said:
Good morning,
Thank you, I'll try it and update here.
Have a nice day. :good:
Click to expand...
Click to collapse
Good morning,you too
Btw,I'm still on ICS,I didn't upgrade to JB and I tried every KK rom without any problems
Sent from my Razr XT910
Related
i have looked maybe over looked, but now that we have the atrix rom on the dx2, will the cwm rom manager be applicable to our phone or is it still droid x2? i have the rom manager premium and when i open it up it asks what phone it is. any and all comments welcome. thanks for looking, hp
homephysician said:
i have looked maybe over looked, but now that we have the atrix rom on the dx2, will the cwm rom manager be applicable to our phone or is it still droid x2? i have the rom manager premium and when i open it up it asks what phone it is. any and all comments welcome. thanks for looking, hp
Click to expand...
Click to collapse
Only if it gets ported
atrix rom
ericerk said:
Only if it gets ported
Click to expand...
Click to collapse
i thought that was how we got the atrix rom was because it was ported to the dx2.
homephysician said:
i have looked maybe over looked, but now that we have the atrix rom on the dx2, will the cwm rom manager be applicable to our phone or is it still droid x2? i have the rom manager premium and when i open it up it asks what phone it is. any and all comments welcome. thanks for looking, hp
Click to expand...
Click to collapse
dont use rom manager with the DX2. that being said you still have to use to original recovery that came with the bootstrap recovery.
booked said:
dont use rom manager with the DX2. that being said you still have to use to original recovery that came with the bootstrap recovery.
Click to expand...
Click to collapse
thank you, i love this forum. people helping people. thanks again, hp
booked said:
dont use rom manager with the DX2. that being said you still have to use to original recovery that came with the bootstrap recovery.
Click to expand...
Click to collapse
Tried it and it bricked my phone.. So don't get any ideas, again it needs to be ported because it works with the unlocked bootloader which we don't have and( The cwr version) it bricks you
ericerk said:
Tried it and it bricked my phone.. So don't get any ideas, again it needs to be ported because it works with the unlocked bootloader which we don't have and( The cwr version) it bricks you
Click to expand...
Click to collapse
so you're saying do not use it? jk, thanks guys i will not use it. don't want a brick. thanks again, hp
I will second that. Don't use rom manager. If you flash the recovery on rom manager you will soft brick your phone and have to sbf in rsd mode.
I know, I did that when I first got my phone.
Rom manager does not currently support the Dx2
Sent from my DROID X2 using XDA App
sawyers70 said:
Rom manager does not currently support the Dx2
Click to expand...
Click to collapse
I heard that koush is gonna make an X2 Versino of it soonish, No promises just a lot of wishes
Sent from my DROID RAZR using Tapatalk
Hopefully once we have ROMs to manage.
stevessvt said:
Hopefully once we have ROMs to manage.
Click to expand...
Click to collapse
Or once we get a working recovery going.
Sent from my DROID RAZR using xda premium
There is a ClockWorkMod recovery already... Everyone is waiting for the FXZ files, so when anyone bricks their razr it can be restored back to factory. Until then, not very many people will chance bricking their phones with no way to restore
We don't have an OFFICIAL recovery yet.
Edit: Just trollin through
how about now..
Well, I don't see the clockworkmod recovery yet. Thought I could at least flash that.
Recovery for the new XT912 Razr
riptex said:
Well, I don't see the clockworkmod recovery yet. Thought I could at least flash that.
Click to expand...
Click to collapse
Developer HASH has a Safestrap Recovery for the new Droid Razr XT912. You can read about it here:
http://hash-of-codes.blogspot.com/p/how-to-safestrap.html
I have not taken the dive yet. Waiting for the SBF Fast Boot files to be release by Big Red or for a Verizon Employee to leak them -- either one would work for me --LOL.
Edit: I just saw that XDA has their own posting on this topic here:
http://forum.xda-developers.com/showthread.php?t=1391900
riptex said:
Sent from my DROID RAZR using Tapatalk
Click to expand...
Click to collapse
it will be perfect if there is support
stevessvt said:
Hopefully once we have ROMs to manage.
Click to expand...
Click to collapse
Just a thought.. I think it would be better if supporting Rom Manager on RAZR as early as now than start porting after a custom ROM becomes available.. Like what the devs did with Clockworkmod even with a very minor issue. (Enters recovery every reboot.)
No love in here? anyone?
Papapau said:
No love in here? anyone?
Click to expand...
Click to collapse
Our Dev FraserTag left us i think its the beginning of "NO LOVE" for our RAZR.... by the way Philippines too, check our forums at tipidcp bro.... Mabuhay
Been running stock rooted ics for a while and decided to try out a rom. I decided to try simplex rom. Well i decided to go back to my backup using safestrap. Well i booted in safestrap wiped and applied the back up. Now on reboot it goes to the M logo then screen goes black? What did i do wrong and what to fix it? I am downloading some things but not sure what i need to do?
thanks
Hi
Try to wipe cache/dalvik. If it don't boot. I think you'll need to flash a stock rom.
What's your razr ? verizon, att, latam...
Cheers
Sorry, i meant to include vzw. Safestrap recovery dont even show up now on boot? So i dont know how to flash the stock rom?
bingo6104 said:
Sorry, i meant to include vzw. Safestrap recovery dont even show up now on boot? So i dont know how to flash the stock rom?
Click to expand...
Click to collapse
Try this guide http://forum.xda-developers.com/showthread.php?t=1840296
You have a XT912 Razr.
Cheers
pedrotorresfilho said:
Try this guide http://forum.xda-developers.com/showthread.php?t=1840296
You have a XT912 Razr.
Cheers
Click to expand...
Click to collapse
Thanks, downloading the firmware. But how do i use it? Load it RSD in ap mode??
http://forum.xda-developers.com/showthread.php?p=23453478
I guess the title should be changed into "How to flash with RSD" or something like that.
I have taken Screens for an step by step Guide, but not sure if we need an second one. I guess not
Sent from my CustomiZed XT910
Thank you so much guys for the links and your patients! Once it downloads i will follow the helpful guide. I hate that my back up didnt work :/
That's not my Guide, but it's realy helpful for people that not confirmed with RSD.
So hit the Thanks Button in the linked Thread :thumbup:
BTW: An Factory Reset before RSD is never wrong, just to be clean and save.
Sent from my CustomiZed XT910
The above guide is also in the link Ive provided.
Cheers
Sent from my XT910 using xda premium
any idea why my back up didnt work? would it be due to the bootloader change from the simplex rom? If that is the case ,do you think i can try the back again?
i folowed razr guys video to update to jelly bean from ics from the post below
http://forum.xda-developers.com/showthread.php?t=2078021
after i tried to install cm 10 on slot 1 and after that my phone doesnt boot past the safestrap screen. i tried to reflash and it didnt work
then i ended up trying to restore the back up that i made. still doesnt work.
now im just stuck on safestrap screen after which the phone goes black and blank or i can go into safestrap menu but whatever i do in their has no effect on the phone.
need some help and advise how to fix this.
im running a gsm xt910 in canada on fido
Have you tried deleting the ROM Slot 1 and then activating it again?
Gus194 said:
Have you tried deleting the ROM Slot 1 and then activating it again?
Click to expand...
Click to collapse
i had to restart the whole proces again im going to install safestrap and try again letshope it works
naifs_br10 said:
i had to restart the whole proces again im going to install safestrap and try again letshope it works
Click to expand...
Click to collapse
no use i installed and followed the instructions just goes back into SS recovery menu
Cm10.1 requiere ics kernel maybe thats why tour device doesnt boot, what aboit your safe system? If you are using safestrap tour main system should be untouched and be able to boot ...
Sent from my XT910 using xda premium
Thats what i did when I had the same problem! just deleted the safestrap fold and then re-activated rom slot-1! Now it work just like the why it should!
Steven87 said:
Cm10.1 requiere ics kernel maybe thats why tour device doesnt boot, what aboit your safe system? If you are using safestrap tour main system should be untouched and be able to boot ...
what you mean ics kernel ?
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
blackops11252 said:
Thats what i did when I had the same problem! just deleted the safestrap fold and then re-activated rom slot-1! Now it work just like the why it should!
Click to expand...
Click to collapse
i didnt get this part.
guys ive been trying to instal cm10.1 for 2 days now if somebody can help me please i'd appreciate it. there isnt much support from what i see on xda forums and my patience is running thing without a phone if somebody can maybe walk me through the steps after the install of the jb leak i'd appreciate it greatly please really need to get a proper rom and i dont have have much understanding except that i have a razr in my hand that is on jb leak thanks to the razr guy guide.
how to get cm 10.1 i dont get it.
Hey man a few days after the JB leak was out spchicks and BDH had a complete guide on how to make the jump stay rooted and how to install SS. hope it helps you.
Sent From My Droid RAZR MAXX
Guys!
I need your help!
I have a Razr Maxx XT910 retail running JB 4.1.2, I want to install the kitkat custom rom on it, so somewhere i read that i need to first root the phone, then install custom recovery CWM, then go for kitkat.
I'm stuck on the first step, Rooting
I have tried the method which includes Oracle VM VirtualBox and the JB_bionic.ova file. does not work. i tried more than 10 times and after rebooting it says update the su binary(super user update). I guess it means my phone is not actually rooted.
What should i do to get the kitkat?
arixooo said:
Guys!
I need your help!
I have a Razr Maxx XT910 retail running JB 4.1.2, I want to install the kitkat custom rom on it, so somewhere i read that i need to first root the phone, then install custom recovery CWM, then go for kitkat.
I'm stuck on the first step, Rooting
I have tried the method which includes Oracle VM VirtualBox and the JB_bionic.ova file. does not work. i tried more than 10 times and after rebooting it says update the su binary(super user update). I guess it means my phone is not actually rooted.
What should i do to get the kitkat?
Click to expand...
Click to collapse
have you tried this method?
wiki.cyanogenmod.org/w/Install_CM_for_umts_spyder
i started with their method on my xt912 and it worked perfect.
gitchrodd said:
have you tried this method?
wiki.cyanogenmod.org/w/Install_CM_for_umts_spyder
i started with their method on my xt912 and it worked perfect.
Click to expand...
Click to collapse
I didnt try that but I know most xt912 rooting methods wont work for xt910 devices
Maybe something like this helps:
http://forum.xda-developers.com/showthread.php?t=1991253
arixooo said:
I didnt try that but I know most xt912 rooting methods wont work for xt910 devices
Click to expand...
Click to collapse
Thats the xt910 method... or should be
I thank you guys to show my appreciation because of your time, but your recommended solution doesn't apply to my condition,
My phone is razr maxx xt910 ME retail which I upgraded myself to JB 4.1.2. The latest official version I got was 4.0.4
Now what should I do? How to root my phone??