Related
I just used casual to root and unlock my note 2.i have root and it booted up on twrp but I want to check if I am unlocked bootloader. Is there a way I can check? In my about phone my status says normal
If the bootloader was not unlocked it would overwrite any changes you make to recovery and system files. So as long as you can reboot without losing TWRP or any custom ROM you've installed you're golden.
Unlocked Bootloader?
Jiggabitties said:
If the bootloader was not unlocked it would overwrite any changes you make to recovery and system files. So as long as you can reboot without losing TWRP or any custom ROM you've installed you're golden.
Click to expand...
Click to collapse
It's been a while for me since I rooted my phone, and I don't know if I unlocked my bootloader either... I have never installed a custom ROM, I only rooted so I could tether. But now that the new OTA update keeps trying to install itself, I need to fix this because it's extremely annoying. I read a thread that said I need to flash this: http://forum.xda-developers.com/showthread.php?t=2578458, but it said that I need my bootloader to be unloacked, and therein lies my question...
Am I thinking this through the correct way?
If you just want to stop the update notification fteeze SDM 1.0
James Mac said:
It's been a while for me since I rooted my phone, and I don't know if I unlocked my bootloader either... I have never installed a custom ROM, I only rooted so I could tether. But now that the new OTA update keeps trying to install itself, I need to fix this because it's extremely annoying. I read a thread that said I need to flash this: http://forum.xda-developers.com/showthread.php?t=2578458, but it said that I need my bootloader to be unloacked, and therein lies my question...
Am I thinking this through the correct way?
Click to expand...
Click to collapse
That is the correct thread. Easy way to check is to boot into recovery and see if there is a custom recovery installed. Power down your device, hold down the volume up + verizon button, then power up. Hold volume up + verizon button until you see the galaxy note 2 splash screen. If it boots into TWRP than you're still good. But you will probably want to update to the latest version of TWRP before you go installing any new roms.
Jiggabitties said:
That is the correct thread. Easy way to check is to boot into recovery and see if there is a custom recovery installed. Power down your device, hold down the volume up + verizon button, then power up. Hold volume up + verizon button until you see the galaxy note 2 splash screen. If it boots into TWRP than you're still good. But you will probably want to update to the latest version of TWRP before you go installing any new roms.
Click to expand...
Click to collapse
Thanks Jiggabitties, I updated TWRP and downloaded official firmware.md5 file and the Mj9 DeOdex file to my pc. Should I transfer those files to the sd card in my phone and install from the TWRP menu? If so, I do the official firmware file first, right? Then the deodex...?
Thanks for all your help man
James Mac said:
Thanks Jiggabitties, I updated TWRP and downloaded official firmware.md5 file and the Mj9 DeOdex file to my pc. Should I transfer those files to the sd card in my phone and install from the TWRP menu? If so, I do the official firmware file first, right? Then the deodex...?
Thanks for all your help man
Click to expand...
Click to collapse
The firmware update is done in ODIN and the ROM is done in TWRP.
James Mac said:
Thanks Jiggabitties, I updated TWRP and downloaded official firmware.md5 file and the Mj9 DeOdex file to my pc. Should I transfer those files to the sd card in my phone and install from the TWRP menu? If so, I do the official firmware file first, right? Then the deodex...?
Thanks for all your help man
Click to expand...
Click to collapse
Yes start by transferring the files to your SD card.
The firmware package from that thread is meant to be flashed via ODIN. If you are not comfortable in flashing firmware via ODIN then use this in it's place... https://www.dropbox.com/s/lz29kvrvzfttfpu/MJ9ModemParams.zip This is a TWRP flashable version of the firmware.
Place the MJ9 Deodex and the modemparam.zip I linked to above on your SD card. Flash the ROM file first, then the modemparam.zip. Then clear cache/ dalvik and reboot. That should be all you need to do. If when you boot you don't get service, then you will need to go ahead and flash the firmware vid ODIN. Some users have no issues with the flashable version that I linked above, some users do.
N915F Kitkat(4.4.4)_Bootloader.tar(Unlocked "Phone bootloader update" check for Odin)
N915F Kitkat(4.4.4)_Bootloader.tar
When we need kitkat bootloader tar file for downgrade from lollipop to kitkat, we can use this. I created it with tar_tool.
Unlocked "Phone bootloader update" check for Odin.
For Downgrade:
1. Download, Extract tar file from zip at attachment. Flash with Odin3 v3.10.6. (check "Phone bootloader update")
2. Flash stock kitkat rom and use it. If you want to use custom rom Flash CF_Auto_Root or other recovery img with odin.
3. Flash custom kitkat rom with cwm.
Attention: If you give md5 error. Delete ".md5" extension from "N915F_Bootloader_Kitkat(4.4.4).tar.md5"
That is it will be like this : N915F_Bootloader_Kitkat(4.4.4).tar.md5---->N915F_Bootloader_Kitkat(4.4.4).tar
Wow thanx.. i was reluctant to download fw with kies and extract this. U r a life saver
md5 error!!!!!
if you take md5 error, delete "*.md5" extension and try again.
Example: bootloader.tar.md5 --> bootloader.tar
genius.lizard2 said:
md5 error!!!!!
Click to expand...
Click to collapse
Did it worked ?
Any chance you could make a version for the sprint variety? 915-P
If you boot into STOCK recovery directly after flashing kitkat, do a factory reset from recovery and it will boot fine.
genius.lizard2 said:
md5 error!!!!!
Click to expand...
Click to collapse
no.i had to download Full lollipop Rom.
but i didn't wipe i think..so you need to test
Wow thanks
now I am on KitKat 4.4.4.
all done .
it's good enough for fy?
md5 eror! binary is invalid........ flash with odin
how to solve???
Does this work with the 915T T-Mobile variant? I was hoping to flash back to 4.4.4 or 5.01. I have heard that the battery life is better than it is on 5.1.1. Cant possibly be worse.
Hi all!
Root your GALAXY A5 on Stock Lollipop 5.0.2
DISCLAIMER
Code:
#include
/*
* Your warranty is now void.
* The ROM is under developement and have some bugs.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
First of all, download the CF-Auto-Root image for your variant:
CF-Auto-Root - A500F
CF-Auto-Root - A500FU
CF-Auto-Root - A500G
CF-Auto-Root - A500H
CF-Auto-Root - A500M
CF-Auto-Root - A500L
CF-Auto-Root - A500S
CF-Auto-Root - A500Y
CF-Auto-Root - A500YZ
Follow this steps to Root your GALAXY A5.
1. Download your 5.0.2 ROM for your device.
2. Rename the ROM file, just delete .md5 at the end of the file.
3. After making that, normally you have a .tar file, open the ROM and you can see all files under.
4. Extract recovery.img and boot.img files from the .tar ROM and move this files on Internal or External storage of your phone, remember it's location, you'll need it after.
5. Flash CF-Auto-Root of 4.4.4 for your variant using Odin.
6. When the phone reboot, install Flashify from Play Store, grant SuperSU request.
7. Launch Flashify and flash the both boot.img and recovery.img that you extracted.
Click to expand...
Click to collapse
Reboot and enjoy your GALAXY A5 rooted.
After rooting your A5, you can install TWRP for installing custom ROMs etc...
Here is a TWRP installation Tutorial:
http://forum.xda-developers.com/galaxy-alpha/help/to-port-twrp-to-galaxy-a5-a500fu-t3150843
Hi, try with KingRoot:
http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461 :good:
mygalaxya said:
Hi, it doesn't work... Other solution? Thanks
Click to expand...
Click to collapse
Unfortunately, there is no development for this device why?
Did u flash poland 5.02 version from odin? I dont have any update from ota.
Inviato dal mio SM-A500FU utilizzando Tapatalk
I received my update in OTA
Yes, you can root 5.0.2. Do the cf auto root first. Once it boots, then you should have root. But it's not done yet. Do not reboot or turn off device as it won't be able to boot back yet. Go to play store and install flashify.
After that, extract the 5.0.2 firmware you flashed (rename and erase the .md5 extension at the end and you now have a .tar file, which can be extracted like a .zip or .rar.
Once extracted, get boot.img and recovery.img and copy them to your phone.
Then open flashify, locate those two images and flash them.
You should have root without any problem.
First flash recovery.img. and renaming it wouldn't cause any harm. The file probably looks like this: something.tar.md5.
If you remove md5, then you have .tar file. Extract boot.img and recovery.img from it like you would from any .zip
droidqwerty said:
First flash recovery.img. and renaming it wouldn't cause any harm. The file probably looks like this: something.tar.md5.
If you remove md5, then you have .tar file. Extract boot.img and recovery.img from it like you would from any .zip
Click to expand...
Click to collapse
Thanks man it works!
droidqwerty said:
Yes, you can root 5.0.2. Do the cf auto root first. Once it boots, then you should have root. But it's not done yet. Do not reboot or turn off device as it won't be able to boot back yet. Go to play store and install flashify.
After that, extract the 5.0.2 firmware you flashed (rename and erase the .md5 extension at the end and you now have a .tar file, which can be extracted like a .zip or .rar.
Once extracted, get boot.img and recovery.img and copy them to your phone.
Then open flashify, locate those two images and flash them.
You should have root without any problem.
Click to expand...
Click to collapse
Hi, thanks for the info; I also have the same problem.
I would like to clarify your instructinos.
1) I have A500FU with lollipop 5.0.2 (which i downloaded and installed with odin)
2) I download cf auto root for 4.4.4?? is that right?
3) I extract boot.img/recovery.img from the 5.0.2 tar file
4) install flashify and flash the above.
Also you mentioned I need to do 3,4 without reboot, coz it wont boot. What will happen if it reboots by mistake? WIll it need a kies restore? or even just a 5.0.2 rom flash?
thanks alot
omicronxda said:
Hi, thanks for the info; I also have the same problem.
I would like to clarify your instructinos.
1) I have A500FU with lollipop 5.0.2 (which i downloaded and installed with odin)
2) I download cf auto root for 4.4.4?? is that right?
3) I extract boot.img/recovery.img from the 5.0.2 tar file
4) install flashify and flash the above.
Also you mentioned I need to do 3,4 without reboot, coz it wont boot. What will happen if it reboots by mistake? WIll it need a kies restore? or even just a 5.0.2 rom flash?
thanks alot
Click to expand...
Click to collapse
If it reboots by mistake, then it would be stuck in kernel logo and the screen would become whitish and remain like that. It's because CF root from 4.4.4 installs old kernel. If this happens, press volume down, home and power key together so that your device turns off.
Then enter download mode to reflash the rom with odin.
droidqwerty said:
If it reboots by mistake, then it would be stuck in kernel logo and the screen would become whitish and remain like that. It's because CF root from 4.4.4 installs old kernel. If this happens, press volume down, home and power key together so that your device turns off.
Then enter download mode to reflash the rom with odin.
Click to expand...
Click to collapse
Great thank you. I will try it today or tomorrow.
Out of curiosity, what if I replace the recovery.img inside cf-auto-root with the new recovery.img from lollipop? Will that do the trick??
Galaxy A7
Hi
I have a galaxy A7. I followed the same method using the A7 CF auto root file for Kitkat 4.4.4. But after flashing, the device reboots. But it does not go to the android. Instead it stays on the screen which shows... SAMSUNG.. GALAXY A7... Any suggestions please??
If it boots into the home screen only i can flash the stock recovery file
droidqwerty said:
Yes, you can root 5.0.2. Do the cf auto root first. Once it boots, then you should have root. But it's not done yet. Do not reboot or turn off device as it won't be able to boot back yet. Go to play store and install flashify.
After that, extract the 5.0.2 firmware you flashed (rename and erase the .md5 extension at the end and you now have a .tar file, which can be extracted like a .zip or .rar.
Once extracted, get boot.img and recovery.img and copy them to your phone.
Then open flashify, locate those two images and flash them.
You should have root without any problem.
Click to expand...
Click to collapse
Thanks! It worked perfectly!
droidqwerty said:
Yes, you can root 5.0.2. Do the cf auto root first. Once it boots, then you should have root. But it's not done yet. Do not reboot or turn off device as it won't be able to boot back yet. Go to play store and install flashify.
After that, extract the 5.0.2 firmware you flashed (rename and erase the .md5 extension at the end and you now have a .tar file, which can be extracted like a .zip or .rar.
Once extracted, get boot.img and recovery.img and copy them to your phone.
Then open flashify, locate those two images and flash them.
You should have root without any problem.
Click to expand...
Click to collapse
Tested and works on A3 and A5, thanks alot
govind.madhu93 said:
Hi
I have a galaxy A7. I followed the same method using the A7 CF auto root file for Kitkat 4.4.4. But after flashing, the device reboots. But it does not go to the android. Instead it stays on the screen which shows... SAMSUNG.. GALAXY A7... Any suggestions please??
If it boots into the home screen only i can flash the stock recovery file
Click to expand...
Click to collapse
Because you haven't flashed the boot.img and recovery.img from Lollipop after rooting.
No.. first i flashed cf auto root. Den phone reboots by itself.. it gets stuck on dsamsung screen. I cant go to the home screen at all. Without that how can i flash boot and recovery files ? Dats the peoblem
Sent from my SM-A700FD using XDA Free mobile app
govind.madhu93 said:
No.. first i flashed cf auto root. Den phone reboots by itself.. it gets stuck on dsamsung screen. I cant go to the home screen at all. Without that how can i flash boot and recovery files ? Dats the peoblem
Sent from my SM-A700FD using XDA Free mobile app
Click to expand...
Click to collapse
So, you don't flashed the recovery.img and boot.img! After flash Cf-Auto-Root, Use Flashify and flash the boot.img + recovery.img from 5.0.2 Lollipop ROM.
I wl wxplain in detail. I took odin. Connected the phone. Den loaded up the auto root file. Clicked on start. So it starts flashing.. after the flashing is complete.. phone reboots itself... ryt ? Den it stays on the samsung screen. Stuck. I can use flashify only if i can boot up completely.
Sent from my SM-A700FD using XDA Free mobile app
---------- Post added at 11:27 AM ---------- Previous post was at 11:21 AM ----------
In the first boot itself the phone gets stuck. It should boot into home screen. Then only i can use flashify.
Sent from my SM-A700FD using XDA Free mobile app
Now you have to reflash the stock ROM Lollipop for your A7 with Odin.
After flashed the ROM, flash the CF-Auto-Root package.
Don't reboot your device, otherwise same bootloop problem, when the device is bootup install "Flashify" from Play Store. Extract the boot.img and recovery.img from the 5.0.2 ROM.
Flash the boot.img and recovery.img from the Stock ROM with Flashify then restart your device and you have a fully functional root on your A7.
This method has worked with my A5.
Still not working
Than you for ur concern man.. But still it dos not work. After flashing cf auto root... I Just leave the phone. I do no touch it. It should boot into android. But it is not. It stays in d same screen.. Samsung... Galaxy A7
Maybe this works only for A3 and A5
Hi, I have successfully rooted 5.0.2 rom on galaxy grand prime with cm autoroot for kit kat.
1. flash new 5.0.2 update with odin (if you had root on kit kat flash 2 times, it wont work first time) http://www.sammobile.com/firmwares/download/54047/G530FZXXU1BOG2_G530FZOXA1BOG2_PHE/
2. boot 5.0.2 set up google account and install super su
3. download flash cm autoroot https://download.chainfire.eu/664/CF-Root1/CF-Auto-Root-fortunalte-fortunaltedx-smg530f.zip?retrieve_file=1
4. boot again - phone will reboot 3 times before booting into system and updating super su, launch and set up super su
5. download recovery.zip, extract and flash it, WARNING use this recovery only with G530FZXXU1BOG2_G530FZOXA1BOG2_PHE, it is extracted from this rom and it should fix boot loop after flashing the cm autoroot package
6. reboot and you have rooted lollipop on G530FZ
MAKE SHURE YOU FLASH recovery from step no 5 otherwise you will end up in boot loop
p.s. I am now working on xposed installer
It worked. Thank you very much
Thank you it works !
Done, but i do not had to flash the recovery, the device has not entered bootloop
Same question as always: and knox? Is trigered right?
Edit: nevermind. I already have my answer.
zapetino said:
Done, but i do not had to flash the recovery, the device has not entered bootloop
Click to expand...
Click to collapse
can you enter recovery?
After this wonderfull root, do you know if an working xposed exist ?
PS: After flashing i think knox is triggerded (i trigered my knox when i flashed root in 4.4.4). Only Kingroot didn't triggered root.
hangy18 said:
can you enter recovery?
Click to expand...
Click to collapse
You were right, after another reboot the device was stuck in bootloop and i had to flash your recovery
zapetino said:
You were right, after another reboot the device was stuck in bootloop and i had to flash your recovery
Click to expand...
Click to collapse
how i flash this autoroot? via recovery or how?
Crimmy20 said:
how i flash this autoroot? via recovery or how?
Click to expand...
Click to collapse
Via ODIN
dcduartee said:
Via ODIN
Click to expand...
Click to collapse
and where i put this autoroot and recovery on odin? like witch section
Crimmy20 said:
and where i put this autoroot and recovery on odin? like witch section
Click to expand...
Click to collapse
PDA on older versions of odin or AP if you are using a newer version of odin
work on G530H?
It worked, and when you reboot the phone stopped working. When you try to run stands in the picture and nothing happens. Install recovery again by Odin, but nothing helps. Any ideas? (Sorry for the language, I have a translator)
hey guys does this method work on g530h ???
if not, can any1 link me to a guide to root my g530h i've been searching for 2 days plz hlp
Hey, it seems like I've got a problem, when I try to update SuperSU it fails :/
Did I do something wrong ?
hey can u plz tell me how did u extract the stock recovery from the rom i need it plz
Sent from my SM-G530H using Tapatalk
Yeh..how would one extract the stock recovery from the (.md5) file..is that possible.? or does one download the stock recovery (.img) file somewhere.?
sent by my: SM-G531M Grand Prime
(Lollipop 5.1.1)
I have this:
Model SM-G530FZ
Model name GALAXY Grand Prime
Country Spain
Version Android 5.0.2
Changelist 816937
Build date Thu, 17 Sep 2015 05:21:41 +0000
Product code PHE
PDA G530FZXXU1BOI2
CSC G530FZOXA1BOI2
Do I have to Flash the previous G530FZOXA1BOG2? Or can I skip this step and flash the autoroot directly? Would work the Recovery with my current version?
Just downloaded and installed Kingroot app...works fine
Hey
Yesterday I flashed a boot logo on my SM-G928F in TWRP. After that my phone doesn't boot into system or recovery anymore - there's always a blackscreen. I only can boot into download mode.
I tried to flash a stock-rom via Odin but that didn't helped - the same blackscreen, because a stock rom does not replace the boot logo.
I think I have to flash the stock boot logo ( https://drive.google.com/file/d/1378RQ5w_vAAmnQ3HB0FymZXWIm12T0Mg/view ) , but thats a zip which I can't flash via Odin.
There a two ways in my mind which could work:
1. Getting a tar.md5 file with the stock boot logo.
2. Getting a tool which allows to flash zips in download mode of the phone.
I really hope that someone could help me with my big problem.
Best regards
DGB
Hey there
I recommend to flash the firmware again but this time after flashing firmware flash the twrp and flash the zip via adb sideload ( a feature present in TWRP) as by adb sideload one is able to flash zip files as well
Or i recommend you to get to know the combination of keys that will help you to directly enter into recovery
Hope it will work
And if there is any problem let me know
As in the internet there are various ways by which a person can flash the custom rom and custom recovery via odin
Look at this link:-
http://www.lineageosrom.com/2017/07/how-to-flash-custom-rom-via-odin.html?m=1
nr10prashant said:
Hey there
I recommend to flash the firmware again but this time after flashing firmware flash the twrp and flash the zip via adb sideload ( a feature present in TWRP) as by adb sideload one is able to flash zip files as well
Or i recommend you to get to know the combination of keys that will help you to directly enter into recovery
Hope it will work
And if there is any problem let me know
As in the internet there are various ways by which a person can flash the custom rom and custom recovery via odin
Look at this link:-
http://www.lineageosrom.com/2017/07/how-to-flash-custom-rom-via-odin.html?m=1
Click to expand...
Click to collapse
Thank you for your answer but that didn't worked. The problem is that flashing the stock firmware doesn't replace or repair the boot image. So I've got a never ending blackscreen when I want to boot in system or TWRP/Recovery and that means that I'm not able to configure ADB Sideload.
I can only boot into download mode, nothing else.
I think the jpg of the boot logo I've installed was corrupted so it can't be loaded
You are in download mode so you have to press all the keys including the home button and once the download mode closes then press the "volume up key and power key and also the home button and then your phone will automatically reboot into recovery.
I know, I tried that multiple times but it doesn't work. Blackscreen... only a never ending blackscreen. The download mode is the only thing taht works. I have to flahs the old boot logo via download mode... but i don't know how
Wait for the battery to be drained out completely and then do what i said earlier
nr10prashant said:
Wait for the battery to be drained out completely and then do what i said earlier
Click to expand...
Click to collapse
I did. but it didn't work, too
I really need someone who is able to integrate the stock boot logo into a custom rom which can be flashed via Odin... Or I need a tool which allows to install zips in download mode. I tried adb sideload again but it didn't recognizes my phone when its not in recovery.
I really think that my S6 edge + is nearly died :crying:
Try to flash the firmware with the samsung smart swith.....
This will 100% works!!!!!4
Inderpreets said:
Try to flash the firmware with the samsung smart swith.....
This will 100% works!!!!!4
Click to expand...
Click to collapse
I know but Samsung removed this feature some months ago so I'm not able to do this
--- I know, it's from the German Samsung Support but it's a confirmation that Samsung removed this feature:
DGB100 said:
I know but Samsung removed this feature some months ago so I'm not able to do this
--- I know, it's from the German Samsung Support but it's a confirmation that Samsung removed this feature:
Click to expand...
Click to collapse
Not even flashing a factory firmware (4 files with pit) with repartition option selected?
What about a combination firmware and then a full stock FW?
яι¢αя∂σ said:
Not even flashing a factory firmware (4 files with pit) with repartition option selected?
What about a combination firmware and then a full stock FW?
Click to expand...
Click to collapse
I only tried to flash stock firmware with AP in Odin... and I tried stock rom with re-partition.
Where do I get those 4 files? I need XEU for my SM-G928F. It would be very nice if you could give me a more detailed instruction for this because I never worked with PIT...
get samfirm v0.3.6
On the model you put sm-g928f, region XEU, tick the binary nature box and press "check update". Download the resulting file, that is a factory firmware to do repairs in a 4 files format: bootloader, pda or ap, modem or cp and csc!
You will get this file:
SM-G928F_1_20180305151001_nsg8uwd0sh_fac.zip
Put each file in the correct field in odin!
About combination firmware, it needs to be same binary version as stock firmware already programed on phone! if first number on firmware version is a 3, combination FW need to be also bin 3!
G928FXXS4CRB4 if is 4, you need comb fw also in bin 4! if you downgrade you get odin error and a softbrick!
Was checking if any comb. fw is available, but i find only paid files for your phone model!
яι¢αя∂σ said:
get samfirm v0.3.6
On the model you put sm-g928f, region XEU, tick the binary nature box and press "check update". Download the resulting file, that is a factory firmware to do repairs in a 4 files format: bootloader, pda or ap, modem or cp and csc!
You will get this file:
SM-G928F_1_20180305151001_nsg8uwd0sh_fac.zip
Put each file in the correct field in odin!
About combination firmware, it needs to be same binary version as stock firmware already programed on phone! if first number on firmware version is a 3, combination FW need to be also bin 3!
G928FXXS4CRB4 if is 4, you need comb fw also in bin 4! if you downgrade you get odin error and a softbrick!
Was checking if any comb. fw is available, but i find only paid files for your phone model!
Click to expand...
Click to collapse
Thanks it worked for me but now I need a pit-file. Do you now where I get it?
EDIT: I found a pit-file for myself. Thank you very much for your help!
HTML:
https://drive.google.com/file/d/0BzyeAt2hy6XednpHZmhRUmtOMFk/view
DGB100 said:
Thanks it worked for me but now I need a pit-file. Do you now where I get it?
EDIT: I found a pit-file for myself. Thank you very much for your help!
HTML:
https://drive.google.com/file/d/0BzyeAt2hy6XednpHZmhRUmtOMFk/view
Click to expand...
Click to collapse
It worked means you got your phone back to normal or you could get the firmware using samfirm?
Pit file is always inside csc file on a 4 files fac firmware. Use the pit on firmware because the pit from your link can be from a early version of android and have different bits for partition sizes!
EDIT: Here, got the combination fw for the binary 4. IF your phone is already ok, don't use this!
DGB100 said:
I know but Samsung removed this feature some months ago so I'm not able to do this
--- I know, it's from the German Samsung Support but it's a confirmation that Samsung removed this feature:
Click to expand...
Click to collapse
SmartSwitch still works for my G925v.
яι¢αя∂σ said:
It worked means you got your phone back to normal or you could get the firmware using samfirm?
Pit file is always inside csc file on a 4 files fac firmware. Use the pit on firmware because the pit from your link can be from a early version of android and have different bits for partition sizes!
EDIT: Here, got the combination fw for the binary 4. IF your phone is already ok, don't use this!
Click to expand...
Click to collapse
I got my phone back to normal so thank you very much!
I have the same problem on my j2 prime I can only goto download mode and in odin tried to install stock firmware but got write fail..can you please help me with this error