I'm looking to download a dump of the 20y FOTA. I'm currently on 20u but with a different carrier. I have no way of updating my device without this file...
You need to be rooted to download the dlpkgfile from /cache/
This could very well be the last update I need for a while
http://www.att.com/esupport/article.jsp?sid=KB423381&cv=820#fbid=nJKQ7F6x9D5
Code:
Android Version: 4.4.2
Baseband version:M8974A-AAAANAZM-1.0.190082
Kernel version: 3.4.0
Build Number: KOT49l.D80020y
The Software Version: D80020y
Update File size: Dependent on customer current version.
D80010q > D80020y : 721 MB (Wi-Fi Required)
D80020c > D80020y : 118 MB (Wi-Fi Required)
D80020k > D80020y: 117 MB (Wi-Fi Required)
D80020u > D80020y: 89.5 MB (Wi-Fi Required)
Edit:
Have the files now and will be putting them on the thread: http://forum.xda-developers.com/att-g2/general/links-manually-forcing-ota-20c-to-20u-t2828874
Bumping for visibility... Still need this...
xaueious said:
Bumping for visibility... Still need this...
Click to expand...
Click to collapse
Edit: found a way to update from 20k to 20y, with the *#*#2666#*#* code, now it show up the ota update, but im rooted, can i safely update? Will i get a bootloop or bricked phone? Will i lose root?
Gemc666 said:
Edit: found a way to update from 20k to 20y, with the *#*#2666#*#* code, now it show up the ota update, but im rooted, can i safely update? Will i get a bootloop or bricked phone? Will i lose root?
Click to expand...
Click to collapse
No, you shouldn't. I think you will get bootlooped. I have no alternative at the moment. I'm stuck like you. May I ask, how exactly did you enable updates? Mine is on JB but each time I try to update it says "Phone not registered*
xaueious said:
Bumping for visibility... Still need this...
Click to expand...
Click to collapse
So noob here, found this when trying to figure out how to update to 20y. I have 20k currently.
I am rooted, just went back to stock rom, tried update and ended up bootlooped, got out of it by following an xda post by Weston Madsen (can't link, haven't made enough comments to allow me), and am now back in stock wanting to update.
If you want this file, I have it copied on my comp, let me know if anyone could use a link
Still don't have the file. Tried messaging DrDanTm too... Bump for visibility...
Gemc666 said:
Edit: found a way to update from 20k to 20y, with the *#*#2666#*#* code, now it show up the ota update, but im rooted, can i safely update? Will i get a bootloop or bricked phone? Will i lose root?
Click to expand...
Click to collapse
How did you do it, explain me the steps by steps
moiramd said:
How did you do it, explain me the steps by steps
Click to expand...
Click to collapse
in the end it didnt worked, it showed up the OTA update but didnt updated, still stuck on D80020k :/
Got the file and updated to 20y from another xda user, asking for permissions to repost...
Please send me. D80020y Ota dump file.thankyou..
Or share it here
posted at http://forum.xda-developers.com/att-g2/general/links-manually-forcing-ota-20c-to-20u-t2828874
Hi
I have D800,wrong flashed by d802,now touch screen not work properly
I want back to d800 FW but can't,If I have dump file I can write over jtag connection
so,if any one want help me,please give me dump
You can take 128mb dump file from working D800,Then upload for me by this command(root needed)
for take 128mb use this :
adb shell
su
dd if=/dev/block/mmcblk0 of=/sdcard/D800_128mb.bin bs=1024 count=131064
then reconnect usb and copy file from phone to pc ,then zip and upload
many thanks
BABAK236 said:
Hi
I have D800,wrong flashed by d802,now touch screen not work properly
I want back to d800 FW but can't,If I have dump file I can write over jtag connection
so,if any one want help me,please give me dump
You can take 128mb dump file from working D800,Then upload for me by this command(root needed)
for take 128mb use this :
adb shell
su
dd if=/dev/block/mmcblk0 of=/sdcard/D800_128mb.bin bs=1024 count=131064
then reconnect usb and copy file from phone to pc ,then zip and upload
many thanks
Click to expand...
Click to collapse
Why dont u flash stock rom tot file..
Everything will be fine.
And if u cant enter download mode the. Force it to 9006 mode by shorting capacitor..
Its not an big ussue...
I can help u to unrbrick..
Whats app me +918826464868
Sent from my LG-D800 using XDA Free mobile app
aftabalam8c2 said:
Why dont u flash stock rom tot file..
Everything will be fine.
And if u cant enter download mode the. Force it to 9006 mode by shorting capacitor..
Its not an big ussue...
I can help u to unrbrick..
Whats app me +918826464868
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
Hi
Phone Can got to DL Mode But LGFlashTool show "Wrong Model " when I try flash with tot file ,I can flash only with D802 and D801 Models with (flash tool 2014) but both model have a problem after flashing done
if I flash phone with D802 or D802T Firmware,My touch screen have conflict and not work properly
but when I flash phone with D801 Model,Touch screen work fine but I don't have IMEI (Null) and Baseband(Unknown),,
--
So,i have only 2 ways for repair This mode:
1-Dump File from working D800...( I want to write this file with JTAG or ISP)
2-Repair SBL1 With Force Phone to "QUHSB 9008 or 9006.....But As I search before http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830,B2B SW not Work Properly .many user try this tool but not work
so,can you give me 128 or even 64mb from alive phone with dd command already posted in previuse my post?
Thank you
http://forum.xda-developers.com/showthread.php?t=3003717 doesn't this method work for tou?
BABAK236 said:
Hi
Phone Can got to DL Mode But LGFlashTool show "Wrong Model " when I try flash with tot file ,I can flash only with D802 and D801 Models with (flash tool 2014) but both model have a problem after flashing done
if I flash phone with D802 or D802T Firmware,My touch screen have conflict and not work properly
but when I flash phone with D801 Model,Touch screen work fine but I don't have IMEI (Null) and Baseband(Unknown),,
--
So,i have only 2 ways for repair This mode:
1-Dump File from working D800...( I want to write this file with JTAG or ISP)
2-Repair SBL1 With Force Phone to "QUHSB 9008 or 9006.....But As I search before http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830,B2B SW not Work Properly .many user try this tool but not work
so,can you give me 128 or even 64mb from alive phone with dd command already posted in previuse my post?
Thank you
Click to expand...
Click to collapse
Hey stop flashing other model rom on your g2.
First of all go and check what is the nodel of your g2.
Open motherboard and see the back of motherboard and u will get the exact model..
Then u flash right rom.
As u said u get error while flashing phone.
Phone is different
Just go to this link but plz check ur phone model befor doing anything.
http://forum.xda-developers.com/lg-g2/general/lg-g2-cross-dll-device-model-fota-laf-t3003717
Sent from my LG-D800 using XDA Free mobile app
Hi
exact model is D800...I see in motherboard.
before I have d802 rom in "about" and everything fine.....but when I try install "Auto rec" phone soft bricked...
Anyway,i did repair my phone by write full partitions by B2B.exe ,Now I can flash D800.kdz ....
Phone startup normaly ,touch work fine,BUT have IMEI null and Baseband "Unknown"
What Should I do now?
Thanks
BABAK236 said:
Hi
exact model is D800...I see in motherboard.
before I have d802 rom in "about" and everything fine.....but when I try install "Auto rec" phone soft bricked...
Anyway,i did repair my phone by write full partitions by B2B.exe ,Now I can flash D800.kdz ....
Phone startup normaly ,touch work fine,BUT have IMEI null and Baseband "Unknown"
What Should I do now?
Thanks
Click to expand...
Click to collapse
Where did u see the model of your g2??
It is on the back side of motherboard.
How can you flash kdz???
D800 have no kdz..it comes with tot file
U flashed which kdz d802????
Dear..
Dont flash d802 kdz or any file of d802.
Flash the tot of d800..
And last..
Where did u see the model??
Sent from my LG-D800 using XDA Free mobile app
BABAK236 said:
Hi
I have D800,wrong flashed by d802,now touch screen not work properly
I want back to d800 FW but can't,If I have dump file I can write over jtag connection
so,if any one want help me,please give me dump
You can take 128mb dump file from working D800,Then upload for me by this command(root needed)
for take 128mb use this :
adb shell
su
dd if=/dev/block/mmcblk0 of=/sdcard/D800_128mb.bin bs=1024 count=131064
then reconnect usb and copy file from phone to pc ,then zip and upload
many thanks
Click to expand...
Click to collapse
No need of fota dump..
U are having error coz ur g2 prop.buil has d802 but u have acrualy d800
http://forum.xda-developers.com/lg-g2/general/lg-g2-cross-dll-device-model-fota-laf-t3003717
Follow this...
It will help u.
If u get any prob.
Msg me..
Sent from my LG-D800 using XDA Free mobile app
Hi
i see model printed on mother borad around backside of camera around
Yes,i did flash with tot file with edit model name file with Hex ....Then have no imei ,,,,,i did repair IMEI null by writing EFS from another phone,Then i haved "0" Imei ,
Next i idid write my own imei with "EFS Profesnoal" Now my phone back to live and everything is ok,,,,
Now i can make call and 4G work properly but ,i have Low SIgnal....around half of full signal
Can you tell me how can i change band from "GSM/WCDMA"....?
Many Thanks "aftabalam",You help me alot
Related
Now we have Unlocked L9 (P760 and P765), is there any method we can flash only Baseband? SmartFlash Tool is not working because it does not recognize phone while flashing. It seems model.dll file only recognizes P990 (O2x) and not P760 or P765.
I tried replacing the DLL file with P765.dll found while extracting KDZ but its not working.
I am told long time back that Fastboot can flash Baseband separately but I dont know the syntax to flash Baseband FLS files of LG.
Can anyone pay attention to this problem. If anyone here knows more about fastboot, then it will be possible to flash baseband and also the ROM image.
Anyone?
HELP!! How to flash baseband versions?
albertwesquer said:
HELP!! How to flash baseband versions?
Click to expand...
Click to collapse
You need to flash kdz to change baseband. Use LG tool or offline flash method. Install ROM don't change your baseband and for what I know, you cannot flash baseband with fastboot because you cannot find radio file for your phone (.fls don't work with fastboot).
artit said:
You need to flash kdz to change baseband. Use LG tool or offline flash method. Install ROM don't change your baseband and for what I know, you cannot flash baseband with fastboot because you cannot find radio file for your phone (.fls don't work with fastboot).
Click to expand...
Click to collapse
AntonX managed to flash radio only http://forum.xda-developers.com/showpost.php?p=44754138&postcount=2
I extracted one .fls file from v20H europe kdz using this tool and I tried to edit antonx updater script but I don't understand why there are 4 .fls files in his package.
PreemPalver said:
AntonX managed to flash radio only http://forum.xda-developers.com/showpost.php?p=44754138&postcount=2
I extracted one .fls file from v20H europe kdz using this tool and I tried to edit antonx updater script but I don't understand why there are 4 .fls files in his package.
Click to expand...
Click to collapse
I don't know why there're 4 files in radio update but kdz extractor got only one file. In some P769 thread said that they get baseband file from OTA temporary folder. I'm not sure. This is that thread http://forum.xda-developers.com/showthread.php?t=2251622&page=3
Well flashing with smartflashtool worked fine for me... Maybe I ll have to take a look again, which version I used. But my baseband got flashed fine, only the .bin file is refusing
Sent from my LG-P760 using xda app-developers app
N00BY0815 said:
Well flashing with smartflashtool worked fine for me... Maybe I ll have to take a look again, which version I used. But my baseband got flashed fine, only the .bin file is refusing
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
Did you follow this guide? http://forum.xda-developers.com/showthread.php?t=1448803
Well not really... I used that tool sooo many times already for my old Optimus Black, that I didnt need that guide. Try different versions of SFT (the one for the OB, the one for the 3D and I think I got another one made by xonar_, but I need to look for it...) and it should work with no problem. But just flash the fls file. I also dont remember in which box I put it, since it shouldnt make any difference. Just go ahead and try it
N00BY0815 said:
Well not really... I used that tool sooo many times already for my old Optimus Black, that I didnt need that guide. Try different versions of SFT (the one for the OB, the one for the 3D and I think I got another one made by xonar_, but I need to look for it...) and it should work with no problem. But just flash the fls file. I also dont remember in which box I put it, since it shouldnt make any difference. Just go ahead and try it
Click to expand...
Click to collapse
Anyway I made this radio updating zip for P760. I didn't test it yet because I don't have a windows xp pc at the moment to flash factory image if something goes wrong. Maybe it works.
Update: doesn't work, it need 4 files...
N00BY0815 said:
Well not really... I used that tool sooo many times already for my old Optimus Black, that I didnt need that guide. Try different versions of SFT (the one for the OB, the one for the 3D and I think I got another one made by xonar_, but I need to look for it...) and it should work with no problem. But just flash the fls file. I also dont remember in which box I put it, since it shouldnt make any difference. Just go ahead and try it
Click to expand...
Click to collapse
I finally managed to update my p760 baseband using SFT.
Thing is procedure went fine, it showed download complete and my phone rebooted but baseband version didn't change. I'm on v20h (installed through flashable zip) and it shows me 01.1230.0 same as before although I extracted baseband files from v20h kdz. Besides procedure didn't wipe the phone as I think it should.
Any clue?
PreemPalver said:
I finally managed to update my p760 baseband using SFT.
Thing is procedure went fine, it showed download complete and my phone rebooted but baseband version didn't change. I'm on v20h (installed through flashable zip) and it shows me 01.1230.0 same as before although I extracted baseband files from v20h kdz. Besides procedure didn't wipe the phone as I think it should.
Any clue?
Click to expand...
Click to collapse
SFT doesnt wipe your phone. So it all should be fine. Which version of SFT did you use? A link maybe? Try to flash an ICS baseband and check if anything changes.
N00BY0815 said:
SFT doesnt wipe your phone. So it all should be fine. Which version of SFT did you use? A link maybe? Try to flash an ICS baseband and check if anything changes.
Click to expand...
Click to collapse
I've used this one for the optimus black since the one for the optimus 2x failed every time.
Yeah this is the one I got too and tried to flash cp and ap files for the p769 but I got a "magic number does not match" error. This would be a great tool for this phone if it would. Work
LG-P769 rooted, debloated, over clocked, under volted, and linked. 'Tis the season to give thanks so hit the button already!
Nathan.7118391 said:
Yeah this is the one I got too and tried to flash cp and ap files for the p769 but I got a "magic number does not match" error. This would be a great tool for this phone if it would. Work
LG-P769 rooted, debloated, over clocked, under volted, and linked. 'Tis the season to give thanks so hit the button already!
Click to expand...
Click to collapse
Ok again, since you dont seem to get it. You can OBLY FLASH THE .fls FILE! This is the baseband. You can NOT flash a complete ROM.
Sent from my LG-P760 using xda app-developers app
N00BY0815 said:
Ok again, since you dont seem to get it. You can OBLY FLASH THE .fls FILE! This is the baseband. You can NOT flash a complete ROM.
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
N00BY can you please tell me your baseband version and which kdz did you use to obtain it?
I flashed v20h baseband through SFT and I have now L6260_MODEM_SIC_01.1230.00 which is the one that I already had.
N00BY0815 said:
Ok again, since you dont seem to get it. You can OBLY FLASH THE .fls FILE! This is the baseband. You can NOT flash a complete ROM.
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
Dude are you mental or just don't understand English very well? This is the last time I'm going to explain this to you. . . If you had any sense at all you would click the link that he is referring to and READ THE WHOLE Thing! I linked the very same one. Find someone that can read it to you if needed.
LG-P769 rooted, debloated, over clocked, under volted, and linked2sd. 'Tis the season to give thanks so hit the button already!
PreemPalver said:
N00BY can you please tell me your baseband version and which kdz did you use to obtain it?
I flashed v20h baseband through SFT and I have now L6260_MODEM_SIC_01.1230.00 which is the one that I already had.
Click to expand...
Click to collapse
I got:
LGP760AT-00-V20h-EUR-XXX-JUL-12-2013
@Nathan.7118391 Then why do you write over again, that you tried to flash CP and AP files? I explicitly said a few times only flash the .fls nothing else. I followed your thread. I am not really sure, if it really flashes the complete baseband. xonar_ once had a closer look at the process and it seemed to be rather complicated. that's why I doubt, that it flashes the same, as a kdz flashes. That's it for now, I ll not respond to posts here anymore...
Hi,
Don't know what happen, why, and what to do, if possible.
I run the last LiquidSmooth version since it's able, no more change, no kernel.
This morning, no problem, some sms, phone calls, play with internet, a normal day in fact. And there are two hours, Idecided to call my wife : no lockscreen, just a blackscreen. So I decided to reboot but nothing. No boot logo, no words, NOTHING. I can't go into recovery or download mode.
Just in case I've ordered a new battery (but the last time I see my battery level this morning there was even more than 60%), but waiting the delivered new one, somebody has an idea? A new battery could help me?
I've tried to charge but nothing (no led, no scrren wake on). I've tried to connect to computer : it search an update for driver : it's writen : "QHSUSB_DLOAD" and after a while it says that no driver can be found. No odin no kies.
Any idea of what happened, or if anyhting is possible (can't buy a new phone).
Thanks
http://forum.xda-developers.com/showthread.php?t=2600869
Sent from my GT-I9205 using Tapatalk
Silesh.Nair said:
http://forum.xda-developers.com/showthread.php?t=2600869
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
really really thanks. I read a lot of differents threads, even considering another phone I don't own, and I thought I've read enough. I'd tried this when back home . thanks again.
Vous êtes bienvenus!!!
Let me know of you need the debrick.IMG. I have one for the I9200. I9205 debrick.img is available in the thread I posted above.
Sent from my GT-I9205 using Tapatalk
So I've read thread, see videos. Now I'm waiting that my pc (which is as fast as a turtle ) backup my sdcard.
I have downoload win32 item and extract.But for debrick.img, the link in first post is not avaible. I've found another file few posts after but it's a *.img.tar file. I am right if I unzip it ? The *.img inside is good to use?
Thanks for the time you spent for me.
Mukiai said:
So I've read thread, see videos. Now I'm waiting that my pc (which is as fast as a turtle ) backup my sdcard.
I have downoload win32 item and extract.But for debrick.img, the link in first post is not avaible. I've found another file few posts after but it's a *.img.tar file. I am right if I unzip it ? The *.img inside is good to use?
Thanks for the time you spent for me.
Click to expand...
Click to collapse
I am uploading it to my mega account. check under DEBRICK/I9205 folder. Should take about 30 minutes to upload. You can also extract the debrick.img from the tar file.
so I've test with your file but doesn't work. I've also tried with the one in the thread , nothing too.
In fact the phone boot but not totaly as it's supposed to do. I press power button then vibrate and then the logo doesn't appear but there is this screen :
Code:
[COLOR="Lime"]BOOT RECOVERY MODE[/COLOR]
CHECK BOOT PARTITIONS. .
COPY FROM T-FLASH. .
WRITE 139008 sectors. .
[COLOR="Red"]FLASH WRITE FAILURE[/COLOR]
ddi : mmc_read failed
[COLOR="red"]ODIN MODE[/COLOR]
PRODUCT NAME: GT-I9205
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
[COLOR="Gray"]QUALCOMM SECUREBOOT: ENABLE
BOOTLOADER AP SWREV: 1[/COLOR]
----------------------------------------
I can't go into any mode (download or recovery), just boot to the screen above.
I've tried to "ODIN" a firmware ( I9205XXUAMG7_I9205XEFAMG1_I9205XXUAMG5_HOME.tar.md5 that I had on pc ) : when plug phone it tells me "added" with blue item (so normal no ? ), *.md5 = good analysis. But when I click on start it tells me that I miss PIT file
Well, you may need to repartition using a I9205 pit file and then try flashing stock rom using Odin. Check with @ValenteL, He's good with things technical. He can provide you with a .pit file too.
Silesh.Nair said:
Well, you may need to repartition using a I9205 pit file and then try flashing stock rom using Odin. Check with @ValenteL, He's good with things technical. He can provide you with a .pit file too.
Click to expand...
Click to collapse
A lot of thanks, I go to see with @ValenteL.
Mukiai said:
A lot of thanks, I go to see with @ValenteL.
Click to expand...
Click to collapse
Did you suxses yet...
Sent from my GT-I9205
shazzl said:
Did you suxses yet...
Sent from my GT-I9205
Click to expand...
Click to collapse
No success yet . I've request him here with a little more explanations I think.
When it happened to you, did you have same problems?
Mukiai said:
No success yet . I've request him here with a little more explanations I think.
When it happened to you, did you have same problems?
Click to expand...
Click to collapse
@Mukiai
if the brick.img create by @ValenteL you shuld used CML1 stock firmware.
If not working you shuld search help from xda member that have the same baseband to flash the brick.img creator and try to flash the same baseband if bmg2 it must be bmj2...
some one have pm me about his brick ths fone I ask for the baseband but the guy don't know...
Then I gave him the brick.img the when re start it stuck at samsung boot logo... I ask him to flash clm1 Stock baseband then the guy just quite.... I don't know it boot or not...check my thread solved hard brick
Sent from my GT-I9205
shazzl said:
@Mukiai
if the brick.img create by @ValenteL you shuld used CML1 stock firmware.
If not working you shuld search help from xda member that have the same baseband to flash the brick.img creator and try to flash the same baseband if bmg2 it must be bmj2...
some one have pm me about his brick ths fone I ask for the baseband but the guy don't know...
Then I gave him the brick.img the when re start it stuck at samsung boot logo... I ask him to flash clm1 Stock baseband then the guy just quite.... I don't know it boot or not...check my thread solved hard brick
Sent from my GT-I9205
Click to expand...
Click to collapse
I've seen it but he didn't reply you, no? maybe he answer you by PM.
I don't know if bmj2 or not. I've several firmware on pc and can't remember the last I flash (when phone ran well ) than i flashed some custom rom (in fact all cm11, BS, Mokee, etc, etc, until I flash latest LisuidSmooth. As it run well I just keep it (waiting the version of BS that @Silesh.Nair make able today... arghhhhh ).
So, I'm little disappointed.
Where did you get the brick.img
Sent from my GT-I9205
shazzl said:
Where did you get the brick.img
Sent from my GT-I9205
Click to expand...
Click to collapse
The link from your first post in your thread didn't work so i've tried with one few posts later. And also test with one from @Silesh.Nair. I tested with two differents sd . The two are 16go : one class4 and one class 10.
Is it normal that after use win32 item , the properties of my sd says that the size is in mb (near 16 mb are free and 47 mb are usedand capacity total 64mb : a deep hole from 16gb???? )?
in attachment : files on sd after win32 item : just one folder named "/image" and inside there are those files on screenshots.
Try to flash CML1 FRAMEWARE...
shazzl said:
Try to flash CML1 FRAMEWARE...
Click to expand...
Click to collapse
I have to wait some hours that it downloads
wainting, i'll try @ValenteL answer
Mukiai said:
Is it normal that after use win32 item , the properties of my sd says that the size is in mb (near 16 mb are free and 47 mb are usedand capacity total 64mb : a deep hole from 16gb???? )?
Click to expand...
Click to collapse
It's normal. The sdcard have 17 partitions but the windows only see the first from 64 MB. 16 are hidden for windows.
You can see them on Control Panel / Admnistrative Tools / Computer Management / Storage / Disk Management (local) ...
and here You see the sdcard, may be F: whit 17 partitions.
Power off on Mega, put the sdcard, Power and must be something to work on it. It write the first 128 MB from emmc, pit file included. And use the guide from @shazzl .
Here I can't help more because I never had a hard brick and not make all process. I made only the sdcard to debrick and analyzed it on Pc.
ValenteL said:
It's normal. The sdcard have 17 partitions but the windows only see the first from 64 MB. 16 are hidden for windows.
You can see them on Control Panel / Admnistrative Tools / Computer Management / Storage / Disk Management (local) ...
and here You see the sdcard, may be F: whit 17 partitions.
Power off on Mega, put the sdcard, Power and must be something to work on it. It write the first 128 MB from emmc, pit file included. And use the guide from @shazzl .
Here I can't help more because I never had a hard brick and not make all process. I made only the sdcard to debrick and analyzed it on Pc.
Click to expand...
Click to collapse
I'm so bad didn't think about this elementary thing (for partitions not seeing)
I made it, tried severals times, with different sd, but everytime same thing. @Silesh.Nair gave me that links to @shazzl then purpose me to contact you. I've tried after reading and see video. But without the same success.
Mukiai said:
I'm so bad didn't think about this elementary thing (for partitions not seeing)
I made it, tried severals times, with different sd, but everytime same thing. @Silesh.Nair gave me that links to @shazzl then purpose me to contact you. I've tried after reading and see video. But without the same success.
Click to expand...
Click to collapse
Dose it boot yet..
Sent from my GT-I9205 using xda app-developers app
Hallo guys,
I´m sorry for new thread but can somebody create tutotial, how to root this device? A lot of tuts do not work, because 4.4.2 (KitKat) blocks the rooting. (I tried for example Vroot, Towelroot, etc. but nothing is working )
Cralost said:
Hallo guys,
I´m sorry for new thread but can somebody create tutotial, how to root this device? A lot of tuts do not work, because 4.4.2 (KitKat) blocks the rooting. (I tried for example Vroot, Towelroot, etc. but nothing is working )
Click to expand...
Click to collapse
4.4.2 can not be rooted (proper permanent root) !
You will have to install stock JB (4.1.2) via .kdz , then root, install CWM recovery, update or flash to stock KK (4.4.2), and then from recovery to root agin.
All you need is in this threads first page:
http://forum.xda-developers.com/show....php?t=2730501
http://forum.xda-developers.com/show....php?t=2652201
Cisf said:
4.4.2 can not be rooted (proper permanent root) !
You will have to install stock JB (4.1.2) via .kdz , then root, install CWM recovery, update or flash to stock KK (4.4.2), and then from recovery to root agin.
All you need is in this threads first page:
http://forum.xda-developers.com/show....php?t=2730501
http://forum.xda-developers.com/show....php?t=2652201
Click to expand...
Click to collapse
So, I will flash old ROM (unofficial) by kdz flasher, than I will root (for example towelroot), how to install CWM? Also by flasher? And update, will it be also offical update to choose (by LG) and than root it?
And, if something will be wrong, for example softbrick, what can I do?
wrong answer
Wrong answer to wrong answer
Cralost said:
So, I will flash old ROM (unofficial) by kdz flasher, than I will root (for example towelroot), how to install CWM? Also by flasher? And update, will it be also offical update to choose (by LG) and than root it?
And, if something will be wrong, for example softbrick, what can I do?
Click to expand...
Click to collapse
1 - flash old rom (OFFICIAL) via kdz flasher
2 - root - Cydia impactor http://forum.xda-developers.com/showthread.php?t=2448085
3 - install recovery - CWM Recovery for example http://forum.xda-developers.com/showthread.php?t=2652201
//the hole point so far is so u have a custom recovery so that u can "force install/patch" the root
4 - flash 4.4.2 kdz / or update via normal ways (LG update from phone, or from LG PC Suite )
5 - enter CWM Recovery, and apply the root for 4.4.2 http://forum.xda-developers.com/showthread.php?t=2754633
And u are done !
The phone cant be hardbriked (from what i know, and most moder phones cant be hardbiricked). If u softbreak it, try the steps where it crashed, untill will work. (i had to try to install the kdz 20 times - i belive i had some cable/power issues with the pc). Also, do all this with the phone battery fully charged !!! (in case it does go wrong, u have enough hours of battery left to make it work)
Please, can you post me which specifically ROMs I should download? I'm a bit lost in ROMs.
Cralost said:
Please, can you post me which specifically ROMs I should download? I'm a bit lost in ROMs.
Click to expand...
Click to collapse
from http://lg-phone-firmware.com/index.php?id_mod=37 :
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW629486573210987654321/D60510A_00.kdz or http://www.filedropper.com/d60510a00 (same file) - EU OPEN - this is the first .kdz u need
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW102695432109876543213/D60520A_00.kdz - this is the second .kdz (4.4.2) - u dont need it if u upgrade via normal phone upgrade
Have you any more v10 EU? One is broken (logo LG is still refreshing and second one is 404) when I flashed on 20A EU again, it is working as before with all apps and settings.
May I download for example czech or italian version, or where is problem?? What I do wrong?
Cralost said:
Have you any more v10 EU? One is broken (logo LG is still refreshing and second one is 404) when I flashed on 20A EU again, it is working as before with all apps and settings.
May I download for example czech or italian version, or where is problem?? What I do wrong?
Click to expand...
Click to collapse
Download links work fine for me !
U can download czech or any country, doesn't matter.
After u install the .kdz, u must reset the phone (it formats the cache , davlik, data, etc....) (when u put 20A again, all the original user data was intact, because the phone was not reseted).
http://www.hard-reset.com/lg-optimus-l9-ii-d605-hard-reset.html ( http://www.youtube.com/watch?v=YkzJlLY3T1k )
After u install the CWM you will be able to clear cashe, data, etc .. from the CWM Recovery menu.
A bit of reading the forums, wouldn't hurt either .....
edit: also note that the first boot takes a lot of time .... if it is more than 20 minutes than something went wrong. Try a few times to be sure, and then reinstall.
Sure, I have read it, but now I have problem with booting. I reinstall it several times, but the logo of LG is there for a long time ( sound and animation are repeated) - I left it maybe 5 min (could not be turned off - only remove battery), when it didn´t work, aj flashed again v20. So I am going to try it once again with czech kdz and leave it more time. I will prey
Cralost said:
Sure, I have read it, but now I have problem with booting. I reinstall it several times, but the logo of LG is there for a long time ( sound and animation are repeated) - I left it maybe 5 min (could not be turned off - only remove battery), when it didn´t work, aj flashed again v20. So I am going to try it once again with czech kdz and leave it more time. I will prey
Click to expand...
Click to collapse
Again, you dont need the cz .kdz ! Use the one u got. After the kdz flasher finishes, RESET the phone! That is the "magic" step!
Cisf said:
Again, you dont need the cz .kdz ! Use the one u got. After the kdz flasher finishes, RESET the phone! That is the "magic" step!
Click to expand...
Click to collapse
I know, I dont need, but I had already downloaded it. Now, it is working, Thanks a lot!
Sorry for that, but how to get into recovery? I did all, but when I update on 4.4.2, I cannot get to recovery. I tried from terminal (nothing) and app called reboot recovery (it reported, I need root) and manualy (vol+ and power) also didnt work. Before update everything worked (on old kdz).
Cralost said:
Sorry for that, but how to get into recovery? I did all, but when I update on 4.4.2, I cannot get to recovery. I tried from terminal (nothing) and app called reboot recovery (it reported, I need root) and manualy (vol+ and power) also didnt work. Before update everything worked (on old kdz).
Click to expand...
Click to collapse
from: http://forum.xda-developers.com/showthread.php?t=2730501
[Q] How to boot to CWM without root?
[A]
1. Reinsert battery
2. Hold Power+Vol Up+Home for about ten seconds a white text appears, that says "Release all buttons" you have 500ms time if it reboots start from step 1 again.
YOU HAVE TO BE VERY EXACT! (If you once installed CWM you have it even when you flashed KK .zip)
or activate in settings, developer options, and then usb debugging. Connect with the pc and issue the command from there. I dont know the exact command, u shuld read the forum thread above... i belive is there (not sure). Anyway on this, google is a good friend.
Cisf said:
from: http://forum.xda-developers.com/showthread.php?t=2730501
[Q] How to boot to CWM without root?
[A]
1. Reinsert battery
2. Hold Power+Vol Up+Home for about ten seconds a white text appears, that says "Release all buttons" you have 500ms time if it reboots start from step 1 again.
YOU HAVE TO BE VERY EXACT! (If you once installed CWM you have it even when you flashed KK .zip)
or activate in settings, developer options, and then usb debugging. Connect with the pc and issue the command from there. I dont know the exact command, u shuld read the forum thread above... i belive is there (not sure). Anyway on this, google is a good friend.
Click to expand...
Click to collapse
Command for that is:
Code:
adb reboot recovery
Cisf said:
1 - flash old rom (OFFICIAL) via kdz flasher
2 - root - Cydia impactor http://forum.xda-developers.com/showthread.php?t=2448085
3 - install recovery - CWM Recovery for example http://forum.xda-developers.com/showthread.php?t=2652201
//the hole point so far is so u have a custom recovery so that u can "force install/patch" the root
4 - flash 4.4.2 kdz / or update via normal ways (LG update from phone, or from LG PC Suite )
5 - enter CWM Recovery, and apply the root for 4.4.2 http://forum.xda-developers.com/showthread.php?t=2754633
And u are done !
The phone cant be hardbriked (from what i know, and most moder phones cant be hardbiricked). If u softbreak it, try the steps where it crashed, untill will work. (i had to try to install the kdz 20 times - i belive i had some cable/power issues with the pc). Also, do all this with the phone battery fully charged !!! (in case it does go wrong, u have enough hours of battery left to make it work)
Click to expand...
Click to collapse
Everything is very nicely explained only one thing I don't understand. In order to install cm11, do I need to have root on 4.4.2 or can I flash the rom from rooted JB with CMW(to skip step 4 and 5 or is it necessary)? I hope you understand what I wanna ask. Thanks!
Sent from my LG-D605 using XDA Free mobile app
thecoldone123 said:
Everything is very nicely explained only one thing I don't understand. In order to install cm11, do I need to have root on 4.4.2 or can I flash the rom from rooted JB with CMW(to skip step 4 and 5 or is it necessary)? I hope you understand what I wanna ask. Thanks!
Click to expand...
Click to collapse
Once u got CWM installed, u dont care about anything else. So yes, after root on JB, and then CWM, you can install cm11 or what ever u want.
Cisf said:
Once u got CWM installed, u dont care about anything else. So yes, after root on JB, and then CWM, you can install cm11 or what ever u want.
Click to expand...
Click to collapse
Thank you so much!!
Sent from my LG-D605 using XDA Free mobile app
hello,
to thank colleagues for advice and links to topics
I am surprised that no one gave link on the forum:
http://forum.android.com.pl/f1211/root-stock-recovery-4-4-2-a-439890/
where there is already some time given way to root the firmware that runs on v20a and v20d to him to write it on v20d at the moment there is only one method specified on the Polish forum, greet and welcome to
http://forum.android.com.pl/f1211/
so i've tried everything to unlock this v10 and so far no go.I need an unlocked phone modem to compare to a locked one and see exactly causing the lock or if i can just flash an unlocked and it will work?
Also can't flash modem of any other variant or else you will be bricked for good.
so i tried flashing system and boot partitions of a lot of different variants to try and get unlock prompt to pop up.
H900(at&t) no boot
H900PR(brazil ver) same thing as at&t no boot at all
H960TR(turkey) hangs on boot animation
H960 (vietnamese ver) same thing as with 960tr hangs boot animation
F600k(boots perfectly, but no sim unlock menu)
F600L(again boots perfectly but no sim unlock menu)
Starting to notice anything? similar model names have similar behaviors ex. h900 and h900pr show exact same boot fault
So, the only possible way is the modem!
can someone with a unlocked t mobile modem please upload theirs. i'm going to flash the unlocked modem and use the f600k system so no tmobile bull**** can lock it again.I really think this could work as long as no stock tmobile rom is installed.I would really really appreciate it as im stuck with this phone rn.
ALSO , here is how to easily get modem partition if you have root.Download "partitions backup and restore" in playstore by wanam
check firmwire/modem in green and backup and that's it! tested myself and works.
So please if you have a unlocked tmobile v10 and are rooted it would very helpful if you could take a few mins to backup modem and upload it.
ok as an incentive im adding a 10$ bounty through paypal.i need the following 5 modem partitions backup using flashfire.
Modem firmware aka modem
Modem firmware data #1 aka modemst1
Modem firmware data #2 aka modem st2
Modem firmware FSG aka fsg
Modem firmware SSD asa ssd
Download flashfire by chainfire from playstore and backup the above partitions and upload them.i've backed up these partitions my self on my v10 so yes it works.I only put a bounty because this device barely has any dev half of these v10 are dead lol also im patient from trying to unlock this thing ffs.First one with the CORRECT partitions i will reach out via pm.
Quick 10$ takes no more than 10 min!!
Backing it up right now as I type this. Whats the best way for me to upload this for you?
EDIT: here is the link, backed up via Flashfire and then zipped up, no password. My phone is currently running stock rooted Eliminator ROM (software version H90120L) https://www.dropbox.com/s/a3l518nse4vkj4q/LGv10Modem.zip?dl=0
Google drive
amoot329 said:
Backing it up right now as I type this. Whats the best way for me to upload this for you?
EDIT: here is the link, backed up via Flashfire and then zipped up, no password. My phone is currently running stock rooted Eliminator ROM (software version H90120L) https://www.dropbox.com/s/a3l518nse4vkj4q/LGv10Modem.zip?dl=0
Click to expand...
Click to collapse
unlocked device correct?
jass65 said:
unlocked device correct?
Click to expand...
Click to collapse
**** i forgot to ask can you also just upload modem.img using the partitions backup and restore app.use settings to switch to img raw (no compression) and backup just the modem.i should come out in .img format and thank you pm ur paypal.
better yet backup through flashfire again but turn off compression in the setting please and thank you! i can't convert the l4z files
jass65 said:
unlocked device correct?
Click to expand...
Click to collapse
The device is bootloader unlocked, I have the T-Mobile version of the device. Will try again for you. You don't need the other zipped file?
No need for the PayPal. I'm glad to help out when I can
Sent from my LG V20 using XDA Labs
---------- Post added at 01:10 PM ---------- Previous post was at 12:59 PM ----------
Here's the updated, non compressed modem files. Done through FlashFire with compression set to none. https://www.dropbox.com/s/r4q4rbh4dtwwvj9/LGv10Modem v2.zip?dl=0
Sent from my LG V20 using XDA Labs
Thank so much man for taking the time.no i dont need the compressed ver.i meant to ask if your v10 is network unlocked (permanent via the t mobile device unlock app) . I need these modem files from an NETWORK UNLOCKED device.if its not i really really appreciate it anyways!i should be been more clear lol
jass65 said:
Thank so much man for taking the time.no i dont need the compressed ver.i meant to ask if your v10 is network unlocked (permanent via the t mobile device unlock app) . I need these modem files from an NETWORK UNLOCKED device.if its not i really really appreciate it anyways!i should be been more clear lol
Click to expand...
Click to collapse
Not sure if I did that or not. The phone is paid off so I would assume I can put it on another network. I've moved on to the newer model v20.
Question, why would the modem firmware change whether it's unlocked or not? Wouldn't that be done via firmware update?
Sent from my LG V20 using XDA Labs
Nope.tmobile has locked these down using the device unlock app.if you never used it on another network other than tmo then its most likely not network unlocked.even if its paid off, you have to contact tmo to request a permanent unlock.once they give you the green light for the unlock then you just use the device unlock app that comes on the tmo phone and hit permanent unlock. modem files hold the unlock info in this case.as i said above ive tried roms from even the international variant only to be greeted by the network locked notification.im sure theres at least one person with a network unlocked tmo v10 lurking around these fourms lol.again i appreciate you taking your time to help!
I will look into getting it unlocked. No big deal for me to do so since i don't use the phone anymore
Sent from my LG V20 using XDA Labs
amoot329 said:
I will look into getting it unlocked. No big deal for me to do so since i don't use the phone anymore
Sent from my LG V20 using XDA Labs
Click to expand...
Click to collapse
you would do that, so kind of you man!!
May have to do so tmrw, I'm currently at work and I didn't bring my V10 with me. Hit me up on fb if you wanna keep in touch, I check xda randomly so I may not get the message on time. My fb search name is same as my xda username
Sent from my LG V20 using XDA Labs
Here you go my friend, V3 is device unlocked. Used the T-Mobile app Device Unlock. Went through the process. Phone rebooted and a toast notification popped up saying phone permanently unlocked. I suppose you can compare both V2 and V3 to see what changed?
https://www.dropbox.com/s/yox0pyol8ttot8e/LGv10Modem v3 unlocked.zip?dl=0
Sent from my LG V20 using XDA Labs
amoot329 said:
Here you go my friend, V3 is device unlocked. Used the T-Mobile app Device Unlock. Went through the process. Phone rebooted and a toast notification popped up saying phone permanently unlocked. I suppose you can compare both V2 and V3 to see what changed?
https://www.dropbox.com/s/yox0pyol8ttot8e/LGv10Modem v3 unlocked.zip?dl=0
Sent from my LG V20 using XDA Labs
Click to expand...
Click to collapse
Your'e the best buddy.million thanks!!
Hi,
I am really curious how this turned out please update me.
tkilloy said:
Hi,
I am really curious how this turned out please update me.
Click to expand...
Click to collapse
Well, i just gave up.i tried everything, this phone is just locked down tight.The phone would not flash the modem.bin at all through fastboot or flashfire since it is a locked partition.I managed to flash the modem firmwire 1 and 2 since they are not locked partitions through flashfire.Phone still not unlocked, so i tried flashing http://lgviet.com/forum/threads/rom-radeonmaya-t-mobile-h901-v4-0-update-19-11-2016.58894/ rom and it has a working sim unlock menu but it says phone cannot be unlocked or something.so i flashed the modem firmwires again and run the sim unlock app and it prompts me for a code! I had my unlock code from ebay and entered it and it said network unlock successful and the phone rebooted itself.But after rebooting it still showed network locked.i think it needs to be on stock rom.i tried porting the sim unlock menu to stock but it doesnt even open.i just gave up on this phone, i just use it like an ipod lol.we have unlocked modem files though i cant find a way to flash it.it just might be what we need.flashfire wont flash protected partitions (modem is protected) and also fastboot keeps through an error when trying to flash anything.the only way to flash the unlocked modem bin is with LGUP.ive managed to extract stock kdz and replace the modem.bin with the unlocked one but i dont know how to convert it back to a kdz or tot so we can flash the modified kdz.also maybe 7.0 has some modem changes? Or i might just try flash modem of korean variant though i would be just testing my luck as it will result 99% a hard brick. 4 ways to do possibly unlock this
Port sim unlock menu to stock rom 99% chance your phone will unlock
Flash modified modem.bin somehow through lgup or lg flashtool.good chance this will work as well
Wait and see if you can expliot something in nougat .if were lucky this might have something.
Sending AP commands through Modem.i tried this myself.it seems you can only communicate with modem with the korean or tizen rom.you can send the command AP%ULCW.
UlCW=unlock code write.so you can write the unlock code through direct comm with modem via usb but i dont know the correct format to enter the code as it keeps throwing an error.
Still thanks to @amoot329 for coming in clutch with the files.when nougat comes out i'll try messing with it again but honestly this phone is useless lol.
amoot329 said:
Here you go my friend, V3 is device unlocked. Used the T-Mobile app Device Unlock. Went through the process. Phone rebooted and a toast notification popped up saying phone permanently unlocked. I suppose you can compare both V2 and V3 to see what changed?
https://www.dropbox.com/s/yox0pyol8ttot8e/LGv10Modem v3 unlocked.zip?dl=0
Sent from my LG V20 using XDA Labs
Click to expand...
Click to collapse
Can you please share the file again... i want to try it on my v10. it got hard bricked and i revived it with f600l though the device is a h901 but probably refurbished unit and have board of f600l
JuGnO said:
Can you please share the file again... i want to try it on my v10. it got hard bricked and i revived it with f600l though the device is a h901 but probably refurbished unit and have board of f600l
Click to expand...
Click to collapse
Will have to wait till I get home from work, in a few hours. My V10 is sitting at home ^_^
Sent from my LG V20 using XDA Labs
Edit: https://www.dropbox.com/s/zyon9kbhijvgmzd/LGv10Modem v3 unlocked.zip?dl=0
That's for the unlocked modem
amoot329 said:
Will have to wait till I get home from work, in a few hours. My V10 is sitting at home ^_^
Sent from my LG V20 using XDA Labs
Edit: https://www.dropbox.com/s/zyon9kbhijvgmzd/LGv10Modem v3 unlocked.zip?dl=0
That's for the unlocked modem
Click to expand...
Click to collapse
thank you very much.
please if you can help me resolve the issue
the attachment is what i am getting after installing the F600L30e
my phone is probably refurbished as it was showing t-mobile and the stickers on the body are also tmobile but it works with F600L software only. LG bridge incorrectly identified it as H901 and tried to update with MM and that is when it got bricked and i revived it from 9008
please help
JuGnO said:
thank you very much.
please if you can help me resolve the issue
the attachment is what i am getting after installing the F600L30e
my phone is probably refurbished as it was showing t-mobile and the stickers on the body are also tmobile but it works with F600L software only. LG bridge incorrectly identified it as H901 and tried to update with MM and that is when it got bricked and i revived it from 9008
please help
Click to expand...
Click to collapse
Can you please help me with this? My sim not working
Hi friends
This is my first thread created because i see alot of people get into trouble after flashing latest stock os on lg v10 specially Labled as V10 H901
I bought it few weeks ago just flashed latest os 6.0
Every thing gone ok until phone reboots
But in settings as this thread says got into trouble
Searched alot but no solution except replacing motherboard
I disassemble the phone and looked at it
IT WAS V10 VS990 AKA V10 Verizon
Then I downloaded latest vs990 stock firmware and boom every thing is working fine now....
Thanks
junejo46726 said:
Hi friends
This is my first thread created because i see alot of people get into trouble after flashing latest stock os on lg v10 specially Labled as V10 H901
I bought it few weeks ago just flashed latest os 6.0
Every thing gone ok until phone reboots
But in settings as this thread says got into trouble
Searched alot but no solution except replacing motherboard
I disassemble the phone and looked at it
IT WAS V10 VS990 AKA V10 Verizon
Then I downloaded latest vs990 stock firmware and boom every thing is working fine now....
Thanks
Click to expand...
Click to collapse
THANK YOU VERY MUCH, Same problem and vpn has stop, unistalling app reboots the phone!, my mobil refurbished is not h900 but vs900.
How do I recommend flashing? By kdz, tot, octopus?
And which version exactly have you downloaded?
junejo46726 said:
Hi friends
This is my first thread created because i see alot of people get into trouble after flashing latest stock os on lg v10 specially Labled as V10 H901
I bought it few weeks ago just flashed latest os 6.0
Every thing gone ok until phone reboots
But in settings as this thread says got into trouble
Searched alot but no solution except replacing motherboard
I disassemble the phone and looked at it
IT WAS V10 VS990 AKA V10 Verizon
Then I downloaded latest vs990 stock firmware and boom every thing is working fine now....
Thanks
Click to expand...
Click to collapse
I bought LG V10 one week ago from UAE and it was apparently an unlocked H900 AT&T phone with android 5.0 . After upgrading to Marshmallow, I faced exactly the same problems
LG VPN stops working after booting
com,process.setting stops working after touching Security and fingerprint in setting
No app can be uninstalled and my phone reboots if try to uninstall apps
Also, when I try to take a photo using led flash my phone turns off completely!
Which firmware do you suggest? could you provide the link and step-by-step guide?
Thanks
in my case .. i did same i check Motherboard it was vs990 . then i download https://lg-roms.com/official-firmware/LG V10-LGVS990/VS99026A_00_0118/
from here .... i try it many time but it was not working. then i downgrade my LG V10 H900 from MM 6.0 To 5.1 lollipop
i just break my mobile in LGUP WITH same H90021w..
when its done 60% i remove Data cable and Remove Battery.
i wait 2 mints then i start LGUP and patch rootedsystemh900.tot and start it with refurbush ... and its Done ....
im back in Lollipop
Path with rootedsystemh900
khalilrehman17 said:
in my case .. i did same i check Motherboard it was vs990 . then i download https://lg-roms.com/official-firmware/LG V10-LGVS990/VS99026A_00_0118/
from here .... i try it many time but it was not working. then i downgrade my LG V10 H900 from MM 6.0 To 5.1 lollipop
i just break my mobile in LGUP WITH same H90021w..
when its done 60% i remove Data cable and Remove Battery.
i wait 2 mints then i start LGUP and patch rootedsystemh900.tot and start it with refurbush ... and its Done ....
im back in Lollipop
Click to expand...
Click to collapse
I did the same but when I start flashing with rootedsystemh900.tot with refurbish, LGUP stops working and show an Error message and restarts.
What should I do? Please help me!
Matrix3445 said:
I did the same but when I start flashing with rootedsystemh900.tot with refurbish, LGUP stops working and show an Error message and restarts.
What should I do? Please help me!
Click to expand...
Click to collapse
Dear bro
1 download h900 correct latest firmware
2 use lgup while phone in downloadmod
3 select refrb by select bin file and reopen lgup
4 enjoy
JeseMazari said:
THANK YOU VERY MUCH, Same problem and vpn has stop, unistalling app reboots the phone!, my mobil refurbished is not h900 but vs900.
How do I recommend flashing? By kdz, tot, octopus?
And which version exactly have you downloaded?
Click to expand...
Click to collapse
You cant goback now to lollipop bcz antirolback
Just download vs990 latest firm flash using lgup by selecting refrbsh option thats it
junejo46726 said:
Dear bro
1 download h900 correct latest firmware
2 use lgup while phone in downloadmod
3 select refrb by select bin file and reopen lgup
4 enjoy
Click to expand...
Click to collapse
Hi bro
I have checked the motherboard and It is VS990. when I try to flash my phone by the latest VS99026A, LGUP show this message:
Error: KDZ file is invalid. H900 -> VS990
Please guide me ...
Thanks
Matrix3445 said:
Hi bro
I have checked the motherboard and It is VS990. when I try to flash my phone by the latest VS99026A, LGUP show this message:
Error: KDZ file is invalid. H900 -> VS990
Please guide me ...
Thanks
Click to expand...
Click to collapse
Edit build.prop
Device model h900
To
Vs990
If not root access
Try using lgflashtool
junejo46726 said:
Edit build.prop
Device model h900
To
Vs990
If not root access
Try using lgflashtool
Click to expand...
Click to collapse
Which version of lgflashtool do you suggest? 2014 or newer ones?
junejo46726 said:
Edit build.prop
Device model h900
To
Vs990
If not root access
Try using lgflashtool
Click to expand...
Click to collapse
Junejo46726:
Thanks for your help bro.
But how can we edit build.prop? The device is in MM already and it can't be rooted.
Only root can access and modify the build.prop file.
Do you have a method to flash the verizon firmware to the refurbished device renamed as H900 AT&T device?
I tried to flash it with LGUP it says KDZ file is invalid. With LG Flash Tool I've also got an error.
kayronman said:
Junejo46726:
Thanks for your help bro.
But how can we edit build.prop? The device is in MM already and it can't be rooted.
Only root can access and modify the build.prop file.
Do you have a method to flash the verizon firmware to the refurbished device renamed as H900 AT&T device?
I tried to flash it with LGUP it says KDZ file is invalid. With LG Flash Tool I've also got an error.
Click to expand...
Click to collapse
There are 3rd party flash tools you can use and try
Else you can also try boardiag utility by will cracker go ahead and try full tutorial is given in that thread
Matrix3445 said:
Which version of lgflashtool do you suggest? 2014 or newer ones?
Click to expand...
Click to collapse
Try oldest one as it will ignore all restrictions
i have not tried it myself but here is the method to edit build prop without root.
adb pull /system/build.prop <path to save file>
Now edit the file you just extracted and save it
Push it back to your phone via adb
adb push <path to your file> /system/build.prop
You're not done yet. You need to set permissions too
So open she'll via terminal
adb shell
Now from shell, set the right permissions
chmod 644 /system/build.prop
And you're done
kayronman said:
Junejo46726:
Thanks for your help bro.
But how can we edit build.prop? The device is in MM already and it can't be rooted.
Only root can access and modify the build.prop file.
Do you have a method to flash the verizon firmware to the refurbished device renamed as H900 AT&T device?
I tried to flash it with LGUP it says KDZ file is invalid. With LG Flash Tool I've also got an error.
Click to expand...
Click to collapse
Have you had any luck with it? I just found myself stuck with the same problem, and I don't know if I should try it
Rockhunther said:
Have you had any luck with it? I just found myself stuck with the same problem, and I don't know if I should try it
Click to expand...
Click to collapse
Did you do?
junejo46726 said:
Hi friends
This is my first thread created because i see alot of people get into trouble after flashing latest stock os on lg v10 specially Labled as V10 H901
I bought it few weeks ago just flashed latest os 6.0
Every thing gone ok until phone reboots
But in settings as this thread says got into trouble
Searched alot but no solution except replacing motherboard
I disassemble the phone and looked at it
IT WAS V10 VS990 AKA V10 Verizon
Then I downloaded latest vs990 stock firmware and boom every thing is working fine now....
Thanks
Click to expand...
Click to collapse
Can you explain to us clearly what flashing tool you used and, if possible, what kdz file you used too(and DLLs if necessary)
Everything on this thread seems to be a bluff...
I could not find any evidence of anyone actually being successful flashing the VS990 rom on to an H900.
Until someone has a well-described process and proof of functionality, I don't think anyone here should believe what is being stated.
Rockhunther said:
Everything on this thread seems to be a bluff...
I could not find any evidence of anyone actually being successful flashing the VS990 rom on to an H900.
Until someone has a well-described process and proof of functionality, I don't think anyone here should believe what is being stated.
Click to expand...
Click to collapse
I confirm that the developers need help, there is a way, I think with lg flashtool but it needs the dll vs990, help us find it, sorry for my english
i'm stuck with you guys
I updated LP-->MM i bought my phone from UAE
Refbru.
and i got problems VPn Stopped and fingerprint...
I checked my phone model and i find it h900 but after check again by motherboard model i saw it. vs990
I need help With that problem i havnt try to flash vs990 yet... You can get kdz and dll files on vs990 side