Related
After attepmting to root, I ended up with a "Security Error" problem. I ended up using fastboot to flash the uboot and xloader. And now since then the phone won't do anything at all. I can enter fastboot, it will even show on the screen when it enters fastboot. But I can no longer enter S/W mode, and the phone won't turn on Using the power buttons or any combinations of buttons. It just shows a blank screen if I try turning it on by holding power. I can't adb into it, and the LG Support Tool can't find the phone. How can I get S/W back at least so I can flash it or something?
It's a p769 and was previously running JB
Which x & u did you flash?
I prefer to do things manually, another thing, who's fastboot did you use? If you used Lelus select option #1 and copy the files p1ics769.bin & p2ics769.bin (found in the "xu" folder) into the "yours" folder.
When you have the inverted fastboot on your phone, type the following
fastboot devices (to check if your are connected)
fastboot flash x-loader p1ics769.bin
fastboot flash u-boot p2ics769.bin
After you do this, take out your battery and hold vol up and enter the usb cable into the pc & phone & put the battery back. If that doesn't work, enter battery, hold vol up and enter usb cable, keep trying different usb ports on your pc.
Fixed!
Flashing the u-boot and x-loader worked perfectly. Put me back at where I was originally which was the "Security Error". Then I just went back into S/W mode, and used the KDZ flash and everything works now! Thank you so much.
Just for those who have trouble, if you have the p769 with JB, and you run into "Security Error" flash the x-loader and u-boot to match ICS, then the LG tool will find your phone. Then you can just flash the JB KDZ
Did u flashed KDZ offline
DreamJohn said:
Flashing the u-boot and x-loader worked perfectly. Put me back at where I was originally which was the "Security Error". Then I just went back into S/W mode, and used the KDZ flash and everything works now! Thank you so much.
Just for those who have trouble, if you have the p769 with JB, and you run into "Security Error" flash the x-loader and u-boot to match ICS, then the LG tool will find your phone. Then you can just flash the JB KDZ
Click to expand...
Click to collapse
HI there I am trying to flash KDZ using offline KDZ method.
I can enter into S/W mode
But it LG software does not detects phone.
It was happening me to previously too. but if we turn on USB debugging when phone was On. It was working.
But the thing is now that I am stuck into boot loop.
And in S/W mode LG tool doesnot detect phone (but I can my phone connected in Device manager)
So LG tool stops at 14%.
HELP ME OUT PLEASE.
How to fix partion problem !!!
After countlss hours of messing with the LG P769 This is how i got into S/W mode to work !:laugh:
ASSUMING you know how to install fastboot drivers there are instructions on the forum ...so follow those guide note fastboot drivers work best on windows 7 windows 8 was giving me hard time ...
1.install fastboot drivers
2.run lelus script at the same time hold vol+ button once the script shows the OMAP device close the script and immediately put the battery back in .The LG phone will boot into S/W mode !
Make sure you write down your imei or serial number AND make sure battery is fully charged . then
Now simply use the LG software tool or the KDZ offline flasher look around the forum for how to guides
Thats it
tawhid111 said:
How to fix partion problem !!!
After countlss hours of messing with the LG P769 This is how i got into S/W mode to work !:laugh:
ASSUMING you know how to install fastboot drivers there are instructions on the forum ...so follow those guide note fastboot drivers work best on windows 7 windows 8 was giving me hard time ...
1.install fastboot drivers
2.run lelus script to get into fastboot at the same time hold vol+ button once the script shows the OMAP device close the script and immediately put the battery back in .The LG phone will boot into S/W mode !
Make sure you write down your imei or serial number AND make sure battery is fully charged . then
Now simply use the LG software tool or the KDZ offline flasher look around the forum for how to guides
Thats it
Click to expand...
Click to collapse
So you solve it! :good:
:/
tawhid111 said:
How to fix partion problem !!!
After countlss hours of messing with the LG P769 This is how i got into S/W mode to work !:laugh:
ASSUMING you know how to install fastboot drivers there are instructions on the forum ...so follow those guide note fastboot drivers work best on windows 7 windows 8 was giving me hard time ...
1.install fastboot drivers
2.run lelus script at the same time hold vol+ button once the script shows the OMAP device close the script and immediately put the battery back in .The LG phone will boot into S/W mode !
Make sure you write down your imei or serial number AND make sure battery is fully charged . then
Now simply use the LG software tool or the KDZ offline flasher look around the forum for how to guides
Thats it
Click to expand...
Click to collapse
Still unable to do it, when I plug the cable holding vol+ it just reboot normally :/
foreverman said:
Still unable to do it, when I plug the cable holding vol+ it just reboot normally :/
Click to expand...
Click to collapse
Then try enter in lelus fastboot mode, ad then flash x-loader, uloader, boot.img and recovery.img from stock rom for your device type model. Then repeat steps 1 and 2
Where can I find the lelus script?
Sent from my Note II
Sorry for reviving such an old thread, but oh well...
Your procedure doesn't seem to work with my device. Just to make sure we are using the same driver packages, can you post a link to the fastboot driver you have successfully used?
My L9 is always showing this "partition doesn't exist" error message, no matter what I try. Lelus's script seems to do the job and the phone is detected as a fastboot device, and can even be detected in LG Flash Tool (using a 910K cable), but flashing will stop after a little over 2 minutes, because the phone disconnects. During all of my attempts, the screen stays black.
Any hint?
ciccillover said:
Sorry for reviving such an old thread, but oh well...
Your procedure doesn't seem to work with my device. Just to make sure we are using the same driver packages, can you post a link to the fastboot driver you have successfully used?
My L9 is always showing this "partition doesn't exist" error message, no matter what I try. Lelus's script seems to do the job and the phone is detected as a fastboot device, and can even be detected in LG Flash Tool (using a 910K cable), but flashing will stop after a little over 2 minutes, because the phone disconnects. During all of my attempts, the screen stays black.
Any hint?
Click to expand...
Click to collapse
Then you need a Technician with a Octopus Box to repair your partition table...
ciccillover said:
Sorry for reviving such an old thread, but oh well...
Your procedure doesn't seem to work with my device. Just to make sure we are using the same driver packages, can you post a link to the fastboot driver you have successfully used?
My L9 is always showing this "partition doesn't exist" error message, no matter what I try. Lelus's script seems to do the job and the phone is detected as a fastboot device, and can even be detected in LG Flash Tool (using a 910K cable), but flashing will stop after a little over 2 minutes, because the phone disconnects. During all of my attempts, the screen stays black.
Any hint?
Click to expand...
Click to collapse
Can you boot into recovery? We now have a custom recovery for locked bootloaders (and CM roms). If you can get into recovery, I would try some adb commands to mount the partitions.
No, no recovery. Just to make sure that I'm not doing it wrong, what is the key combination to boot to recovery?
I have also tried:
Code:
fastboot boot some_recovery_image.img
It says ok, but the phone just hangs at the black screen and becomes undetectable as a fastboot device, until I pull the battery. So, unless the some_recovery_image.img is unsuitable for my P760 (which may be!), there is something seriously wrong I think.
Or maybe I can try the same command with the custom recovery for bootloader locked phones... Where can I find it?
ciccillover said:
No, no recovery. Just to make sure that I'm not doing it wrong, what is the key combination to boot to recovery?
I have also tried:
Code:
fastboot boot some_recovery_image.img
It says ok, but the phone just hangs at the black screen and becomes undetectable as a fastboot device, until I pull the battery. So, unless the some_recovery_image.img is unsuitable for my P760 (which may be!), there is something seriously wrong I think.
Or maybe I can try the same command with the custom recovery for bootloader locked phones... Where can I find it?
Click to expand...
Click to collapse
Your EMMC partition is wiped or fried... you really need a JTAG service or a Box like octopus because your L9 is Hard-bricked...
Thanks for your opinion. Yet, I still want to hear from others.
I'm running into more and more problems with the L9 as their me grows.
-Fastboot doesn't work under Windows 8.1 and 10, but under the now obsolete(for me) Windows 7, unlike my other devices, which are fine with Win 10.
-ADB seems to work, but requiring the device to be still able to boot.
-I always boot to recovery from within Android as long as the L9 ain't bricked. After a failed rom install, during which the sd card failed(could no longer write or be formatted afterwards, the last time stamps of files and folders were set during the failed install) I discovered a problem with TWRP(Artas182x's and Edwin's), which may have been present since a long time: Trying to invoke TWRP via keypress will brick the device!
So, if my P760 no longer boots, there's only download mode available, sort of the final line of defense.
-There's sort of a trick if even download mode fails: After a failed attempt unplug phone, force switch-off, if the phone is in brick state. Then switch on, force switch-off again, and only then attempt download mode again. And have patience while holding down the vol button, it might take up to 20 seconds for the phone to switch itself on into download mode. (A single forced powerdown will cause Fastboot NOT to work the next time)
But I'm absolutely clueless about the recovery issue, for now TWRP is semi-working, can only be accessed via Android, as long as the phone is fully working.
W/o Fastboot, I now have flashed stock rom several times and rooted it with Kingo rooter just to be able to run Flashify to install TWRP. If Flashify is the culprit for the TWRP issues, I could need a recommendation for a better working app.
ciccillover said:
Thanks for your opinion. Yet, I still want to hear from others.
Click to expand...
Click to collapse
Tried OMAP flasher ? It needs memory configuration file in order to work with our device
No, I didn't. I have sold the phone for spares.
Inviato dal mio LG-D855 utilizzando Tapatalk
I never needed the OMAP drivers and tools. As they are ancient, they will probably make even more problems with newer Windows versions.
I could by no means invoke Fastboot on this device with Windows 8.1 and 10, Seven worked. So you had to go for Download Mode instead to recover to stock rom, then root with the Kingo tool, then install TWRP via Rashr or Flashify, the most time consuming way to recover from the frequent bricks.
And the LG Flash Tool 2014 always needed several attempts to get the job done. The latest official recovery tool from LG works in D/L Mode, but will always download the rom image anew.
Hi all!!
Yesterday i tried to install android 4.4 but the procces didnt succeed, it stuck at. LG boot logo. So i decided to restore my backup in ckockworkmod,it started the process then stopped at the phase "restoring /system" . I waited about a half hour, and because it didnt take the much time before, i took out the battery. I read somewhere that formatting the system partition in cwm could help, so i did that. Then i retried restoring my backup. It stuck at the same phase. Later i downloaded the official kdz, and decided to flash it. I could bring the phone in update mode, but the process stopped at 15% at lg update manager.
At the moment i can get into clockworkmod, but cant restore /system . The update mode is also okay. I dont know that fastboot works or not. I havent tried it yet. Please help me thanks in advance
@trapistasajt
You will need to get fastboot working and use lelus's fastboot script to flash the "u" and "x" loaders for the device and then perform the offline or online flash
http://forum.xda-developers.com/showthread.php?t=2292828
Also as you found out you cannot flash custom roms without ulocking the bootloader first and you cannot use the L9 CWM bootstrap recovery for Locked Bootloaders, too flash custom roms.
try this online flash methode with B2CAppSetup
http://forum.xda-developers.com/showthread.php?t=2085344
i had the same probleme and i fixed it .
My bootloader is unlocked. I tried the fast boot method, but it doesnt go further than "Waiting for omap...." . So, i couldnt go into fastboot (probably my fault). Yesterday i sent it to the service. If they notice that my varranty is void (because of the unlocked bl) and send it back, i will try it once more. I would be very thankful if someone could write a noob friendly-fastboot guide. As i read, lots of people are struggling with the same problem. Thanks in advance!!!
You have to use LGMobile Support Tool (Install drivers from it first) Then enter in download mode conecting the phone to pc pressing vol+ and the rest its automatic.
jufece said:
You have to use LGMobile Support Tool (Install drivers from it first) Then enter in download mode conecting the phone to pc pressing vol+ and the rest its automatic.
Click to expand...
Click to collapse
I installed the drivers but it didnt work
trapistasajt said:
I installed the drivers but it didnt work
Click to expand...
Click to collapse
what happened??
jufece said:
what happened??
Click to expand...
Click to collapse
It didnt go further than searching for "omap device", so i couldnt load fast boot, as i said. my phone is still in the service
If they 'll send it back to me, because of unlocked bootloader, i wil try it once more. Any suggestions?
trapistasajt said:
It didnt go further than searching for "omap device", so i couldnt load fast boot, as i said. my phone is still in the service
If they 'll send it back to me, because of unlocked bootloader, i wil try it once more. Any suggestions?
Click to expand...
Click to collapse
I dont know about fastboot.
LG Mobile support tool let you download the correct drivers. Then connect your phone while u keep pressing vol+ and it enters in SW Upgrade mode. Then just click "additional features" and "upgrade error recovery"
jufece said:
I dont know about fastboot.
LG Mobile support tool let you download the correct drivers. Then connect your phone while u keep pressing vol+ and it enters in SW Upgrade mode. Then just click "additional features" and "upgrade error recovery"
Click to expand...
Click to collapse
Thanks! What should i do after that? Or it will automatically flash v20h on my phone?
trapistasajt said:
Thanks! What should i do after that? Or it will automatically flash v20h on my phone?
Click to expand...
Click to collapse
It shows something about firmware ir will restore. Ir will flash the latestbfirmware from original carrier release.
For example i actuallybhave v20L but my original carrier only released v10a. It will restore to v10a
None of them works, other ideas?
This fastboot method worked for me in 5 min, pay close attention to the instructions and it works!
http://androidforums.com/optimus-l9-all-things-root/807569-guide-security-error-fix.html
Spent days with LG update tool which if you read the log has no url for files to download.
Good luck!
I got my phone back from the service. They didnt repair it, because my varranty is void. I tried the methods mentioned above.
First, I tried flashing kdz, (with the solution for post-jb problem), but i couldn't get into S/W mode, which was available before the service.
Second, since i couldn't load S/W mode, the LG upgrader wasn't successfull, too
Third, fastboot still not work.
I am sure, that im not the only person with this problem, since it happened during installing @artas182x 's JB 4.4 rom. Please @artas182x or somebody write a noob-friendly guide/suggestion which may help to unbrick my beloved phone. Thanks!!!!!
Hi all,
My LG G5 is in a bootloop and I cannot even access the recovery.
I guess I made something very, very stupid. Can anyone help me? Please??
Here is what I did:
- Android 6.0 stock ROM (v10i)
- Encryption is on
- unlocked bootloader
- rooted using the official LG way => everything worked fine
- installed latest TWRP => everything worked fine
- entered TWRP and installed Nougat bootloader (LG-H85020K-Flashable.Bootloader.zip) from the v20 upgrade (I actually planned to installed FulmicsROM-4.5 and the manual said I need the Nougat bootloader)
=> bootloop
The device keeps saying "The device software cannot be checked for corruption. Press The power key to pause boot". I did that and ran
fastboot devices
on my Windows PC, but no devices showed up. I have used fastboot in the past, so I am sure that the drivers work.
I also tried LG Bridge, but it does not detect anything.
Does anyone have any idea how I can rescue my device?
Regards
Clarenze
Yippee! I found a solution:
- install LGUP + drivers
- turn off phone
- hold VOLUME UP key and connect USB connector to PC => Phone displays "Firmware Upgrade"
- start LGUP => LGUP detects the phone and allows to flash a kdz file
My phone works again and the day is saved!
Hi guys!
I have a xt1650-03 with android 8.0.0 PLO27.76.51 rooted with Magisk, unlocked bootloader and TWRP Recovery 3.1.1-0.
Since i unlock bootloader it got crazy, many problems!
1- Always i that reset the phone it enters automatically recovery mode, after forced restart in recovery mode, it starts via bootloader.
2- When charging never turn off phone, always enter in recovery mode after reset.
I did many methods but no success.
My questions:
1- Can I update my bootloader?
2- All images of firmware always come with bootloader inside?
3- Bootloader is always modified when installing new firmware?
4- I compare bootloader (Android phones) with MS-DOS (Computers), I'm correct? I mean, I format and install new "Windows" but MS-DOS is not altered.
5- This happens accour with you all?
I have a XT1032 with bootloader unlock and works perfectlly!
I think that problems are added intencionally by motorola.
Thanks anyway!